2A792-LC-TLLRGB Tube Light

Portable Tube Light Tube Light Mini Instructions for Use - + M 5V -1- Warning Caution Product specification 1. Please keep dry, do not touch the product with wet hands, and do not expose the product Do not immerse the product in water or expose it to rain. 2. This product is not waterproof, please pay attention to the rain and wet environment Waterproof. 3. Please place it out of the reach of children. 4. Built-in lithium battery, do not disassem- ble, hit, squeeze or put into the fire. Do not disassemble, hit, squeeze or put into fire. 5. Do not use in flammable gas, violation of this warning may cause violation of this warning may cause an explosion or fire. 6. Do not use, store or charge in a hot environment or in a closed space under direct sunlight. Do not use, store or charge in a hot environ- ment or in a closed space under direct sunlight. 7. Please use the special charger for charging and follow the operating instructions correctly, and use within the specified voltage and temperature range. 8.This product involves batteries, please strictly follow the corresponding operating instructions regarding the use of batteries. Otherwise, it may lead to explosion or fire. 1. After charging is completed, the power cord should be unplugged. 2. After not using the product for a long time, before using the product again, you should the power will be fully charged, otherwise it may lead to no power and can not be turned on. The machine. 3. In order to extend the service life of the battery, it is recommended that every three months once a charge maintenance. 4. This product has a built-in rechargeable lithium battery, which has a certain life limit. After a certain period of use, the performance will be weakened, which is a normal phenom- enon. 1. Product name: RGB portable tube light 2. Product Model: Tube Light Mini manual carefully and carefully before use, and keep this manual for future reference after reading. -2- Standard items Part Name Tube light: 1pcsUSB charging cable: 1 pcs Instruction manual: 1 copySmall tripod: 1 pcs 1. Product name: RGB portable tube light 2. Product Model: Tube Light Mini 3. Body material: aluminum alloy 4. Charging time: about 2.5 hours 5. Built-in lithium battery: DC7.4V 2500mAh 6. rated power: 10W 7. RGB color gamut: 0-360 ° full color 8. color temperature range: 2700K-7500K 9. color rendering: Ra>96+ 10. 10 dimming range: 0-100% 11. Number of lamp beads: 124 12. battery life: 100% 7500K power continu- ous output of about 1.7 hours 13. ambient temperature: -10 ~ 35 degrees, storage temperature -5 ~ 45 degrees. Charging temperature 0~45 degrees 14. Charging interface: Type-C 15. Charging power: 5V2A 16. Fixed interface: 2 general 1/4" nuts 17. Product size: Φ39mm, length 313mm 18. Net weight: about 350g Interface Icons 1/4"screw 1/4" screw Function button Adjustment button Power switch Charging port Type-C OLED displa Charging mouth Fixed screw holes Fixed screw holes ②Brightness ⑬Bluetooth icon ①Color temperature mode ③Color temperature ④Magenta/Green - + M 5V -3- Interface Function Description: 6. Light effect: display the current light simulation effect, 6 kinds of light effect can be selected. 7. Frequency: display the current light flashing frequency, 1 ~ 10 adjustable. 8. Wireless: show whether it’s under the current wireless control mode. 9. Power: a. Display the current power. b. When the high temperature power icon will display "HOT" high temperature warning, when using the environment temperature is too high or continuous use for a long time, it will high temperature warning sign will appear, at this time continue to use will be forced to turn off the light or turn off the output power, wait for the temperature to recover and reboot. c. The charging icon will be displayed when charging. d. The 100 icon will be displayed when charging is full. 1. Brightness: display the current brightness percentage, 0~100% adjustable. 2. Color temperature: display the current color temperature value, 3200K~7500K adjustable. 3. Magenta / green: display the current magenta / green value, -1 ~ 1 adjustable. 4. Color display: display the current color value, 0 ° ~ 360 ° full color adjustable. 5. Color saturation: display the current saturation, 1~100 adjustable. Operating Instructions ⑤Color mode ⑥Color display ⑦Color saturation ⑭Charging icon ⑮Battery level⑧Light effect mode ⑨Light effect ⑩Frequency ⑫Wireless switch ⑯Battery life display ⑪Wireless mode Turn on/off the power: Toggle the power switch to turn the power on or off. -4- Light effect mode FX: 1. In the icon shows the previous mode dial the button, select the light effect mode , press the M button again, the icon turns to FX icon, while the selection icon appears, select the icon pointing to , then dial to adjust 0 ~ 100% brightness value. 2. Press the M button, select the icon pointing to , at this time the dial can choose six different light simulation effects, OFF to turn off the light simulation effects. The 6 light effect modes are as follows: 1: Loop mode 2: Lightning mode 3: Flame mode 4: Candlelight mode 5: Police car mode 6: Screen mode 3. Press the M button, select the icon pointing to , then dial to adjust the light 1 ~ 10 flashing frequency function, OFF for off the light light frequency. Color mode HSL. 1. With the icon displaying the previous mode , dial to select the color mode, press the M button, the icon changes to SHL, and at the same time the selection icon appears . At the same time, the selection icon ap- pears, select the icon pointing to, at this time, dial to adjust 0 ~ 100% brightness value. 2. Press the M button, select the icon pointing to H, at this time, dial the button to adjust 0 ° ~ 360 ° full color function. 3. Press the M button, select the icon pointing to S, at this time, dial the key to adjust 0~100 color saturation function. 4. Press the M button, SHL icon converted to icon , then dial to switch to the next mode. Color temperature mode CCT: 1. After turning on the LED l…

Text truncated - open the document above for the full version.

Lume Cube, Inc. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: June 5, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2A792-LC-TLL Lume Cube, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, Lume Cube, Inc. (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. Lume Cube, Inc. ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: Lume Cube, Inc. FRN: 0032743536 Address: 2231 Rutherford Rd, Suite 100 Carlsbad, California 92008 United States Signature: Contact Person: Cherry Zhong Tel: 858 352 6067 Email: [email protected] Applicant Company Name: Lume Cube, Inc. FRN: 0032743536 Address: 2231 Rutherford Rd, Suite 100 Carlsbad, California 92008 United States Signature: Contact Person: Cherry Zhong Tel: 858 352 6067 Email: [email protected]

Rev 1/26/2023 Lume Cube, Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 06-05-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2A792-LC-TLL [Lume Cube, Inc.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Lume Cube, Inc.] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Cherry Zhong Rev 1/26/2023 Lume Cube, Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 06-05-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A792-LC-TLL [Lume Cube, Inc.] ce8rtifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Cherry Zhong

Lume Cube, Inc. Date: June 5, 2026 Product Model Number: LC-TLL FCC ID: 2A792-LC-TLL To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. Signature： By: Cherry Zhong Title: Manager Tel.: 858 352 6067 Email: [email protected] On behalf of: Lume Cube, Inc.

Lume Cube, Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 9, 2026 Subject; Request for Confidentiality FCC ID: 2A792-LC-TLL To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature： By: Cherry Zhong Title: Manager

Report No: SSP26050262-1E FCC ID: 2A792-LC-TLL Annex A. EUT External Photos Model: LC-TLL EUT View 1 EUT View 2 Report No: SSP26050262-1E FCC ID: 2A792-LC-TLL EUT View 3 EUT View 4 Report No: SSP26050262-1E FCC ID: 2A792-LC-TLL EUT View 5 EUT View 6 Report No: SSP26050262-1E FCC ID: 2A792-LC-TLL EUT View 7

Report No: SSP26050262-1E FCC ID: 2A792-LC-TLL Annex D. Label FCC Label Sample Label Size: 1.5cm*1cm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

Report No: SSP26050262-1E FCC ID: 2A792-LC-TLL Annex B. EUT Internal Photos EUT View 1 EUT View 2 Report No: SSP26050262-1E FCC ID: 2A792-LC-TLL EUT View 3 EUT View 4 Report No: SSP26050262-1E FCC ID: 2A792-LC-TLL EUT View 5 EUT View 6 FPCB ANT Report No: SSP26050262-1E FCC ID: 2A792-LC-TLL EUT View 7 EUT View 8 Report No: SSP26050262-1E FCC ID: 2A792-LC-TLL EUT View 9 EUT View 10 Report No: SSP26050262-1E FCC ID: 2A792-LC-TLL EUT View 11

FCC ID: 2A792-LC-TLL RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For BLE Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit -2.08 -2(±1) -1 0.79 2402 5 0.2448745 3.0 So a SAR test is not required

Report No: SSP26050262-1E FCC Test Report Page 1 of 33 FCC TEST REPORT FCC ID: 2A792-LC-TLL Report No. : SSP26050262-1E Applicant : Lume Cube, Inc. Product Name : RGB Tube Light Model Name : LC-TLL Test Standard : FCC Part 15.247 Date of Issue : 2026-05-27 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26050262-1E FCC Test Report Page 2 of 33 Test Report Basic Information Applicant..................................: Lume Cube, Inc. Address of Applicant...............: 2231 Rutherford Rd, Suite 100 Carlsbad, California 92008 United States Manufacturer..........................: Shenzhen LiNeng Technology Co., Ltd. Address of Manufacturer........: Room 512, Longhai Business Center, No.88 Gongye Road, Longhua Subdistrict, Longhua District, Shenzhen City, Guangdong Province, China Product Name.........................: RGB Tube Light Brand Name.............................: LUME CUBE Main Model..............................: LC-TLL Series Models..........................: - Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2020 + Cor.1-2023 Date of Test .............................: 2026-05-19 to 2026-05-26 Test Result...............................: PASS Tested By ................................: (Colin Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26050262-1E FCC Test Report Page 3 of 33 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure.................................................................................................................................................... 22 6.3 Test Data and Results .......................................................................................................................................... 22 7. Maximum Pea…

Text truncated - open the document above for the full version.

1. General Information 1.1 Antenna Information Manufacturer: Shenzhen LiNeng Technology Co., Ltd. Address of Manufacturer: Room 512, Longhai Business Center, No.88 Gongye Road, Longhua Subdistrict, Longhua District, Shenzhen City, Guangdong Province, China Product Name: 2.4GHz Antenna Model Name: LC-TLL Frequency Range: 2400MHz - 2500MHz Type of Antenna: FPCB antenna Antenna Gain: 0dBi (Max.) Impedance: 50 ohm Antenna View: Unit: mm 2.Antenna Specification information 2.1 Gain Frequency Peak Gain (dBi) Polarity 2400MHz 0 Horizontal 2400MHz -0.54Vertical 2450MHz -1.43Horizontal 2450MHz -1.76Vertical 2500MHz -1.68Horizontal 2500MHz -1.27Vertical 2.2 Radiation Pattern View

Report No: SSP26050262-1E FCC ID: 2A792-LC-TLL Annex C. Test Photos Radiated Emission Test View 1 Radiated Emission Test View 2 Report No: SSP26050262-1E FCC ID: 2A792-LC-TLL Conducted Emission Test View 1