2A797-SP009-BKAKaraoke Speaker

SP009_1nstruction Manual FRONT MVMT ©2026 JME & Co, All Rights Reserved Distributed by JME & CO, NYC. LLC, New York, NY 10018 Designed in New York, Made in China support: [email protected] MVMT and MVMT logo are registered trademarks of JME & Co The artwork and design of this package are protected by United States Copyright law and may not be reproduced, distributed, displayed, published, or used for any purpose without prior written permission Yo u may not alter or remove any trademark or copyright notice from this package. Because of continuous improvements, images and product specifications may differ slightly from the actual product The Bluetooth• word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. The microSD'" is a trademark of SD-3C, LLC. All other trademarks or registered trademarks are the property of their respective owners 心WARNING: C ancer and Reproductive Harm - www.P65 Warnings.ca.gov FCC ID: 2A797一SPD09·BKA FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, incl uding interference that may cause undesired operation. NOTE 1: This equipment has been t ested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency ener gy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, w hich can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 垒� 庉凸三 1< � � 妇 目MINIUSB DIIISCO BALL 0 Bluetooth· Because of continuous improvements, the images and the specs on the packaging may differ slightly from the actual product MVM丁 BACK CONTROL PANEL 。业volume Increase/Decrease slider PREV @ SCAN e VOL + @) 0®CB NEXT (3 REC @ VOL - @ (0® 0 � � � MIC VOL 。 REMIX ＠ FF 。 ／ 。 ON fJ Reverb volume Increase/Decrease slider ＠ Previous song •uodmelf伦mode,p,ess it to eoable selfie f,octioo (ooly lo, ISO system mobUe phooe) ePlay/Pause Long press. Automatic search @Volume increase {D Next son g ＠ 叨thuse of TF Mode Replay/Record INPUT @) Volume decrease ＠ sv�@ 。 use @USB Slot I I f> TF 巨三马© (;) USB-C Charging Port 0) ®0 G3.5 mm Audio Output f)TF Power slot WIRELESS KARAOKE ePower button Long press. ON/OFF •o;sco ball should tcm oo actomatlcally when Mlcmphooe Is ON aod Is coooected to USB Slot 1. Make sure the unit's battery is charged. Hold Power buton to start the product 2. Wireless connection: Enable Bluetooth from your mobile device, locate the microphone's pairing name: SP3583-BKA and connect to the microphone. Prompt tone will notify you of a successful connection 3. Play your song selection from your device. Adjust sound: Using the Mic Volume / Reverb Volume slider to adjust the volumes to suitable level 4. Start singing Karaoke! SELFIE FUNCTION 1. Press the M/POWER button to switch from wireless mode to self1e mode 2. Turn on Bluetooth on your mobile device. Find "Shutter" ,n the list of available devices and select it to connect. 3. Open the camera app on your mobile device Press either the闷八r•or田IV· button to take a photo. Note: This function reqwres Android 4.2.2 or later, or 10S 6.0 or later. Other versions are not currently supported Mobile phones with a dedicated p hys ical camera button are not supported TWS FUNCTION: PAIRING TWO SPEAKERS 1. Turn on both speakers. Do not connect either speaker to a Bluetooth device 2. Press the power button twice on one of the speakers. The speakers will pair with each other 3. Once pairing is complete. turn on Bluetooth on your mobile device and connect to the paired speakers. WIRED HEADPHONE OUTPUT Insert a TF card or USB flash drive, or establish a Bluetooth connection. Then connect wired headphones to the 3.5 mm audio jack. Start audio playback from the selected source. The audio will play through the headphones TECHNICAL PARAMETERS POWER SUPPLY FREQUENCY RANGE 2402 - 2480MHz BATTERY CAPACITY SPEAKER SENSITIVITY 50 dB REVERBERATION MODE SOUND EFFECT CHARGING TIME REVERBERATION BUILT-IN Li-Battery 858800mAh 800 mAh 2 Hours

Rev 1/26/2023 Haizhi(Dongguan) Technology Co.,Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-06-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2A797-SP009-BKA [Haizhi(Dongguan) Technology Co.,Ltd] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Haizhi(Dongguan) Technology Co.,Ltd] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Peter Wang Rev 1/26/2023 Haizhi(Dongguan) Technology Co.,Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-06-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A797-SP009-BKA [Haizhi(Dongguan) Technology Co.,Ltd] ce8rtifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Peter Wang

Haizhi(Dongguan) Technology Co.,Ltd U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: August 06, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2A797-SP009-BKA Haizhi(Dongguan) Technology Co.,Ltd(“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: Haizhi(Dongguan) Technology Co.,Ltd FRN: 0032743585 Address: No. 203, Building 1, No 10, Huaide Dakeng Road, Humen Town, Dongguan City, China Signature: Contact Person: Peter Wang Tel: 18211307641 Email: [email protected]

Haizhi(Dongguan) Technology Co.,Ltd Date: August 06, 2026 Product Model Number: SP009-BKA, SP3653-1-DTW, SP3653BB-1-PK2, SP3653CH-1-RDA, SP3653LP-1-BRA, SP007-PKA, SP3583-BKA, SP3583- PKA, SP3584- IVA FCC ID: 2A797-SP009-BKA To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. Signature： By: Peter Wang Title: Manager Tel.: 18211307641 Email: [email protected] On behalf of: Haizhi(Dongguan) Technology Co.,Ltd

Haizhi(Dongguan) Technology Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 6, 2026 Subject; Request for Confidentiality FCC ID: 2A797-SP009-BKA To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature： By: Peter Wang Title: Manager

Haizhi(Dongguan) Technology Co.,Ltd Model Difference Statement Date: August 06, 2026 FCC ID: 2A797-SP009-BKA Dear Sir/Madam, Added models SP3653-1-DTW, SP3653BB-1-PK2, SP3653CH-1-RDA, SP3653LP-1-BRA, SP007-PKA, SP3583-BKA, SP3583-PKA, SP3584- IVA basis of the original product SP009-BKA. The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: Peter Wang Title: Manager Company name: Haizhi(Dongguan) Technology Co.,Ltd Address: No. 203, Building 1, No 10, Huaide Dakeng Road, Humen Town, Dongguan City, China

Report No: SSP26070391-1 FCC ID: 2A797-SP009-BKA Annex of Test Report Annex A. EUT External Photos Model: SP009-BKA EUT View 1 EUT View 2 Report No: SSP26070391-1 FCC ID: 2A797-SP009-BKA Annex of Test Report EUT View 3 EUT View 4 Report No: SSP26070391-1 FCC ID: 2A797-SP009-BKA Annex of Test Report EUT View 5 EUT View 6 Report No: SSP26070391-1 FCC ID: 2A797-SP009-BKA Annex of Test Report EUT View 7 EUT View 8

Report No: SSP26070391-1 FCC ID: 2A797-SP009-BKA Annex of Test Report Annex D. Label and Information FCC Label Sample Label Size:1.6cm*0.3cm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

Report No: SSP26070391-1 FCC ID: 2A797-SP009-BKA Annex of Test Report Annex B. EUT Internal Photos Model: SP009-BKA EUT Internal View 1 EUT Internal View 2 PCB Antenna Report No: SSP26070391-1 FCC ID: 2A797-SP009-BKA Annex of Test Report EUT Internal View 3 EUT Internal View 4 Report No: SSP26070391-1 FCC ID: 2A797-SP009-BKA Annex of Test Report EUT Internal View 5 EUT Internal View 6

FCC ID: 2A797-SP009-BKA RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For BR+EDR Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit 0.52 0(±1) 1 1.259 2402 5 0.3902 3.0 So a SAR test is not required

Report No: SSP26070391-1 FCC Test Report Page 1 of 51 FCC TEST REPORT FCC ID: 2A797-SP009-BKA Report No. : SSP26070391-1 Applicant : Haizhi(Dongguan) Technology Co.,Ltd Product Name : Karaoke Speaker Model Name : SP009-BKA Test Standard : FCC Part 15.247 Date of Issue : 2026-07-30 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.zrlklab.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26070391-1 FCC Test Report Page 2 of 51 Test Report Basic Information Applicant..................................: Haizhi(Dongguan) Technology Co.,Ltd Address of Applicant...............: No. 203, Building 1, No 10, Huaide Dakeng Road, Humen Town, Dongguan City, China Manufacturer..........................: Haizhi(Dongguan) Technology Co.,Ltd Address of Manufacturer........: No. 203, Building 1, No 10, Huaide Dakeng Road, Humen Town, Dongguan City, China Product Name.........................: Karaoke Speaker Brand Name.............................: - Main Model..............................: SP009-BKA Series Models..........................: SP3653-1-DTW, SP3653BB-1-PK2, SP3653CH-1-RDA, SP3653LP-1-BRA, SP007-PKA, SP3583-BKA, SP3583-PKA, SP3584- IVA Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2020 + Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024 Date of Test .............................: 2026-07-24 to 2026-07-29 Test Result...............................: PASS Tested By ................................: (Coke Huang) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26070391-1 FCC Test Report Page 3 of 51 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure.................................................................................................................................................... 22 6.3 Test Data and Results ...........................................................…

Text truncated - open the document above for the full version.

Page 1 of 3 1. General Information 1.1 Product Information Manufacturer: Haizhi(Dongguan) Technology Co.,Ltd Address of Manufacturer: No. 203, Building 1, No 10, Huaide Dakeng Road, Humen Town, Dongguan City, China Product Name: 2.4G Antenna Model Name: SP009-BKA Frequency Range: 2400MHz - 2483.5MHz Type of Antenna: PCB Antenna Antenna Gain: 0dBi (Max.) Impedance: 50 ohm Antenna View: Length * Width (1.5cm * 0.5cm) Page 2 of 3 2. OTA Test 2.1 Gain Frequency Peak Gain (dBi) Polarity 2402MHz 0 Horizontal 2402MHz -0.33 Vertical 2442MHz -1.31 Horizontal 2442MHz -1.65 Vertical 2480MHz -1.92 Horizontal 2480MHz -2.02 Vertical Page 3 of 3 2.2 Radiation Pattern View

Report No: SSP26070391-1 FCC ID: 2A797-SP009-BKA Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View Below 1GHz Report No: SSP26070391-1 FCC ID: 2A797-SP009-BKA Annex of Test Report Radiated Emission Test View Above 1GHz