2A7AA-CM2R1PIT4GAllegro Cellular

Agent letter FCC attestation statement Kiwa Page 1 of 2 RF_753, Issue 2 15-02-2023 U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company name: Master Meter Inc. FRN: 0021436175 Contact person name: Scott Seehoffer Street address: 101 Regency Parkway ZIP/City/State Mansfield, TX 76063, US Telephone number: 817-842-8000 Email address: [email protected] Signature: Date: 30-July-24 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Arad Technologies LTD. Grantee Code: 2A7AA FRN: 0032503765 FCC ID: 2A7AA- CM2R1PIT4G Contact person name: Noga Bar Street address: 4 HaMada st. Agent letter FCC attestation statement Kiwa Page 2 of 2 RF_753, Issue 2 15-02-2023 ZIP/City/State 2069206, Yokneam Elite, Israel Telephone number: +972-52-4290848 Email address: [email protected] Signature: Date: 30-July-24 Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 01 07-02-2023 1 st version RvdM 02 1 15-05-2023 Added FRN to Agent details RvdM Issued/modified by : Richard van der Meer Function : Certification assessor Revision : 02 Date : 15-02-2023 Verified by : Willem Jan Jong Function : Team Lead Date : __-02-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : __-02-2023

Covered list attestation FCC application letter Kiwa Page 1 of 2 RF_755_02 15-02-2023 Certification Application Attestation Statements Arad Technologies LTD 4 HaMada st. 2069206 Yokneam Elite Israel Subject: FCC ID: <2A7AA-CM2R1PIT4G> To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) Arad Technologies LTD certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) Arad Technologies LTD (“the applicant”) certifies that, as of the date of the filing of this application, the applicant - is /  - is not (3) identified on the Covered List as an entity producing “covered” equipment. Date: 31.07.2024 City: Yokneam Elite Name (2) : Noga Bar Function: VP of Quality and Excellence Telephone number: +972-52-4290848 Email address: [email protected] Signature: Revision Record Sheet: 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double click on the appropriate box and select ‘’checked” then “OK” Covered list attestation FCC application letter Kiwa Page 2 of 2 RF_755_02 15-02-2023 Revision Section number Page number Date Remark(s) issued by 01 07-02-2023 1 st version RvM 02 1 15-02-2023 Changed Applicant to Company and added “Subject: FCC ID: “ RvdM Issued/modified by : Richard van de Meer Function : Certification assessor Revision : 02 Date : 15-02-2023 Verified by : Willem Jan Jong Function : Team Lead Date : __-02-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : __-02-2023

Declaration We, the undersigned, Company Name: Arad Technologies LTD Address: Hamada 4, Yokneam Ellit Country: Israel Telephone number: 972-4-9935222 Fax number: 972-4-9935227 Declare under our sole responsibility that in our product design CAT-M PIT Booster 2, we are using the Sercom cellular modem TPM540S, FCC ID: P27-TPM540 with an internal antenna that have less gain (dBi) in comparison with Sercom antenna used in TPM540S module testing for FCC approval. CAT-M PIT Booster 2 - Antenna specification: Antenna layout Antenna type Multiband printed antenna Frequency range Band 2 Band 4 Band 12 1850 - 1910MHz 1710 – 1755MHz 699 – 716MHz Antenna gain max (peak) 1.8dBi 2.5dBi 0.3dBi Antenna radiation pattern: Band 2: 1850 - 1910MHz Band 4: 1710 – 1755MHz 1880MHz 1732.5MHz Band 12: 699 – 716MHz 707.5MHz:

Date: June 19, 2024 TPM540S blocking bands We, the undersigned Company Name: Arad Technologies LTD Address: Hamada 4, Yokneam Ellit Country: Israel Telephone number: 972-4-9935222 Fax number: 972-4-9935227 Confirm that we use the following bands of the TPM540S, LTE Cat-M Module: Bands 2/4/12 And the other supported TPM540S bands are blocked by software, not used with this application. Thank you, Vily Negreanu Technical Manager of Regulatory, Certification and Reliability

RF_160_05 Declaration of Authorisation Date of issue 02-01-2023 Declaration of Authorization We Name: arad technologies Ltd. Address: 4 Hamada street, POB 537 . City: Yokneam Elit, 2069206. Country: Israel . Declare that: Name Representative of agent: Peysahov Sheynin Svetlana (1) Agent Company name: Hermon Laboratories Ltd.. Address: Harakevet Industrial Zone.. City: Binyamina 30500.. Country Israel . is authorized to apply for Certification of the following product(s): Product description:  Allegro Cellular . Type designation:  PIT Unit X . Trademark: NA . Validity/ expiry date August 19, 2025 on our behalf. Date:  August 19, 2024.. City:  Yokneam Elit .. Name:  Noga Bar .. (2) Function: ...... VP of Quility and Excellence .... Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent. Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 02 1 02-01-2023 History sheet added AG Issued/modified by : Axel Gase Function : Quality Manager Revision : 02 Date : 02-01-2023 Verified by : Willem Jan Jong Function : Team Lead Date : 02-01-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 02-01-2023

FCC, Request for non-disclosure Date: 23-06-2023 RF_501, Issue 11 Page 1 of 2 Company Name: Arad Technologies Ltd. Address: 4 Hamada street, POB 537 City: Yokneam Elit, 2069206 Country: Israel To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: 2A7AA-CM2R1PIT4G Reference number: 54470 Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: in order to avoid exposed of the technology to the competitors Date: August 19, 2024 Name and signature of applicant: Noga Bar Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period FCC, Request for non-disclosure Date: 23-06-2023 RF_501, Issue 11 Page 2 of 2 Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 10 1 02-01-2023 History sheet added AG 11 1 & 2 23-06-2023 Corrected date and page# WJJ Issued/modified by : Willem Jan Jong Function : Team Lead Revision : 11 Date : 23-06-2023 Verified by : Axel Gase Function : Manager Quality Assurance Date : 23-06-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 23-06-2023

Declaration We, the undersigned, Company Name: Arad Technologies LTD Address: Hamada 4, Yokneam Ellit Country: Israel Telephone number: 972-4-9935222 Fax number: 972-4-9935227 Declare under our sole responsibility that our product CAT-M PIT Booster 2 is not transmitting simultaneously on device specific RF technologies: LoRaWAN, BLE and LTE CAT-M (Bands 2,4 and 12).

Arad Technologies Ltd. FCC ID: 2A7AA-CM2R1PIT4G IC: 28664-CM2R1PIT4G Page 1 of 4 EXTERNAL PHOTOGRAPHS This document contains 3 photographs Arad Technologies Ltd. FCC ID: 2A7AA-CM2R1PIT4G IC: 28664-CM2R1PIT4G Page 2 of 4 Photograph No.1 Allegro Cellular general view Arad Technologies Ltd. FCC ID: 2A7AA-CM2R1PIT4G IC: 28664-CM2R1PIT4G Page 3 of 4 Photograph No.2 Allegro Cellular rear side view Arad Technologies Ltd. FCC ID: 2A7AA-CM2R1PIT4G IC: 28664-CM2R1PIT4G Page 4 of 4

Label format Label location

ARAD TECHNOLOGIES FCC ID: 2A7AA-CM2R1PIT4G RF Exposure information The Allegro Cellular is classified as mobile. The Allegro Cellular includes BLE , LoRa transmitters operating according to FCC part 15 subpart C section 15.247 (DTS) and approved LTE CAT-M module that approved under FCC ID: P27-TPM540. The RF technologies: LoRaWAN, BLE and LTE CAT-M (Bands 2,4 and 12) is not transmitting simultaneously. The FCC power density limit for general population/uncontrolled exposure is 1 mW/cm 2 for 2.4 GHz for BLE transmitter. Limit for power density for general population/uncontrolled exposure is 1 mW/cm 2 for 1500 -100000 MHz frequency range. The FCC power density limit for general population/uncontrolled exposure is 0.609 mW/cm 2 for 914.9 MHz for LoRa transmitter. Limit for power density for general population/uncontrolled exposure is f/1500 mW/cm 2 for 300-1500 MHz frequency range. The power density P (mW/cm 2 ) = P T / 4 r 2 BLE transmitter P T is the transmitted power, which is equal to the peak transmitter output power 4.92 dBm plus maximum antenna gain 2.5 dBi, the maximum equivalent isotopically radiated power EIRP is P T = 4.92 dBm + 2.5 dBi = 7.42 dBm =5.52 mW. The power density at 20 cm (minimum safe distance, required for mobile devices), calculated as follows: 5.52 mW / 4 (20 cm) 2 = 0.001 mW/cm 2 << 1 mW/cm 2 General public cannot be exposed to dangerous RF level. ARAD TECHNOLOGIES FCC ID: 2A7AA-CM2R1PIT4G LoRa transmitter P T is the transmitted power, which is equal to the peak transmitter output power 27.94 dBm plus maximum antenna gain 0 dBi, the maximum equivalent isotopically radiated power EIRP is P T = 27.94 dBm + 0 dBi = 27.94 dBm =622.3 mW. The power density at 20 cm (minimum safe distance, required for mobile devices), calculated as follows: 622.3 mW / 4 (20 cm) 2 = 0.123 mW/cm 2 << 0.609 mW/cm 2 General public cannot be exposed to dangerous RF level.

Hermon Laboratories Ltd. 66 HaTachana str., P.O. Box 23, Binyamina 3055001, Israel Tel. +972 4628 8001 Fax. +972 4628 8277 E-mail: [email protected] Page 1 of 59 Report ID: ARARAD_FCC.54470_BLE_Rev1.docx Date of Issue: 14-Aug-24 ELECTRICAL TESTING 0839.01 TEST REPORT ACCORDING TO: FCC 47CFR part 15 subpart C §15.247 (DTS), subpart B, Class B, RSS-247 Issue 3:2023, RSS-Gen Issue 5, ICES-003 Issue 7:2020 FOR: ARAD TECHNOLOGIES Allegro Cellular Model: PIT Unit X FCC ID: 2A7AA-CM2R1PIT4G IC: 28664-CM2R1PIT4G This report is in conformity with ISO/ IEC 17025. The "A2LA Accredited" symbol endorsement applies only to the tests and calibrations that are listed in the scope of Hermon Laboratories accreditation. The test results relate only to the items tested. This test report shall not be reproduced in any form except in full with the written approval of Hermon Laboratories Ltd. Report ID: ARARAD_FCC.54470_BLE_Rev1.docx Date of Issue: 14-Aug-24 Page 2 of 59 Table of contents 1 Applicant information ..................................................................................................................................................... 3 2 Equipment under test attributes .................................................................................................................................... 3 3 Manufacturer information .............................................................................................................................................. 3 4 Test details .................................................................................................................................................................... 3 5 Tests summary .............................................................................................................................................................. 4 6 EUT description ............................................................................................................................................................. 5 6.1 General information ....................................................................................................................................................... 5 6.2 EUT Test configuration .................................................................................................................................................. 5 6.3 Transmitter characteristics ............................................................................................................................................ 6 7 Transmitter tests according to 47CFR part 15 subpart C and RSS-247 requirements .................................................. 7 7.1 Minimum 6 dB and 99% bandwidth ............................................................................................................................... 7 7.2 Peak output power ...................................................................................................................................................... 11 7.3 Field strength of spurious emissions ........................................................................................................................... 16 7.4 Band edge radiated emissions .................................................................................................................................... 39 7.5 Peak spectral power density ....................................................................................................................................... 42 7.6 Antenna requirements ................................................................................................................................................. 47 8 Emissions tests according to FCC 47CFR part 15 subpart B and ICES-003 requirements......................................... 48 8.1 Radiated emission measurements .............................................................................................................................. 48 9 APPENDIX A Test equipment and ancillaries used for tests ....................................................................................... 52 10 APPENDIX B Test equipment correction factors ......................................................................................................... 53 11 APPENDIX C Measurement uncertainties .................................................................................................................. 56 12 APPENDIX D Test laboratory description ................................................................................................................... 57 13 APPENDIX E Specification references........................................................................................................................ 58 14 APPENDIX F Abbreviations and acronyms ................................................................................................................. 59 Report ID: ARARAD_FCC.54470_BLE_Rev1.docx Date of Issue: 14-Aug-24 Page 3 of 59 1 Applicant information Client name: ARAD TECHNOLOGIES Address: POB 537, HaMada 4, Yokneam Ind. Zone, Yokneam Ilit 20692, Israel Telephone: 04-9935222, Ext: 271 Fax: 04-9935227 E-mail: [email protected] Contact name: Mr. Vily Negreanu 2 Equipment under test attributes Product name: Allegro Cellular Product type: Transceiver Model(s): PIT Unit X Serial number: 80E12696A18F Hardware version: PCB00266 (1) Software release: 74.1.9 Receipt date 23-May-24 3 Manufacturer information Manufacturer name: ARAD TECHNOLOGIES Address: POB 537, HaMada 4, Yokneam Ind. Zone, Yokneam Ilit 20692, Israel Telephone: 04-9935222, Ext: 271 Fax: 04-9935227 E-Mail: [email protected] Contact name: Mr. Vily Negreanu 4 Test details Project ID: 54470 Location: Hermon Laboratories Ltd. 66 HaTachana str., P.O. Box 23, Binyamina 3055001, Israel Test started: 27-Jun-24 Test completed: 11-Jul-24 Test specification(s): FCC 47CFR part 15 subpart C §15.247 (DT…

Text truncated - open the document above for the full version.

Report ID: ARARAD_FCC.54470_BLE_Rev1.docx Date of Issue: 14-Aug-24 Test specification: Section 15.247(d), RSS-247 section 5.5, Emissions at band edges Test procedure: ANSI C63.10, section 7.8.6 Test mode: Compliance Verdict: PASS Date(s): 07-Jul-24 Temperature: 24 ºC Relative Humidity: 58 % Air Pressure: 1012 hPa Power: 3.6 VDC Remarks: Page 41 of 59 Plot 7.4.1 The highest band edge emission at low carrier frequency Plot 7.4.2 The highest band edge emission at high carrier frequency Report ID: ARARAD_FCC.54470_BLE_Rev1.docx Date of Issue: 14-Aug-24 Test specification: Section 15.247(e) / RSS-247 section 5.2(2), Maximum power spectral density Test procedure: ANSI C63.10 section 11.10.2 Test mode: Compliance Verdict: PASS Date(s): 07-Jul-24 Temperature: 24 ºC Relative Humidity: 58 % Air Pressure: 1012 hPa Power: 3.6 VDC Remarks: Page 42 of 59 7.5 Peak spectral power density 7.5.1 General This test was performed to measure the peak spectral power density radiated by the transmitter RF antenna. Specification test limits are given in Table 7.5.1. Table 7.5.1 Peak spectral power density limits Assigned frequency range, MHz Measurement bandwidth, kHz Peak spectral power density, dBm Equivalent field strength limit @ 3m, dB(V/m)* 902.0 – 928.0 3.0 8.0 103.2 2400.0 – 2483.5 5725.0 – 5850.0 * - Equivalent field strength limit was calculated from the peak spectral power density as follows: E=sqrt(30×P)/r, where P is peak spectral power density and r is antenna to EUT distance in meters. 7.5.2 Test procedure for field strength measurements 7.5.2.1 The EUT was set up as shown in Figure 7.5.1, energized and its proper operation was checked. 7.5.2.2 The EUT was adjusted to produce maximum available to end user RF output power. 7.5.2.3 The field strength of the EUT carrier frequency was measured with antenna connected to spectrum analyzer/ EMI receiver. To find maximum radiation the turntable was rotated 360 0 and the measuring antenna height was swept in both vertical and horizontal polarizations. 7.5.2.4 The frequency span of spectrum analyzer was set to capture the entire 6 dB band of the transmitter, in peak hold mode with resolution bandwidth set to 3.0 kHz, video bandwidth wider than resolution bandwidth, auto sweep time and sufficient number of sweeps was allowed for trace stabilization. The spectrum lines spacing was verified to be wider than 3 kHz. Otherwise the resolution bandwidth was reduced until individual spectrum lines were resolved and the power of individual spectrum lines was integrated over 3 kHz band. 7.5.2.5 The peak of emission was zoomed with span set just wide enough to capture the emission peak area and sweep time was set equal to span width divided by resolution bandwidth. Spectrum analyzer was set in peak hold mode, sufficient number of sweeps was allowed for trace stabilization and peak spectral power density was measured as provided in Table 7.5.2 and associated plots. Report ID: ARARAD_FCC.54470_BLE_Rev1.docx Date of Issue: 14-Aug-24 Test specification: Section 15.247(e) / RSS-247 section 5.2(2), Maximum power spectral density Test procedure: ANSI C63.10 section 11.10.2 Test mode: Compliance Verdict: PASS Date(s): 07-Jul-24 Temperature: 24 ºC Relative Humidity: 58 % Air Pressure: 1012 hPa Power: 3.6 VDC Remarks: Page 43 of 59 Figure 7.5.1 Setup for carrier field strength measurements Spectrum analyzer/ EMI receiver Tes t antenna Tes t antenna EUT Ground plane 1.0m 4.0m 1.5 m Height Test distance Ferrites Power supply Auxilliary equipment Flush mounted turn table Wooden table Report ID: ARARAD_FCC.54470_BLE_Rev1.docx Date of Issue: 14-Aug-24 Test specification: Section 15.247(e) / RSS-247 section 5.2(2), Maximum power spectral density Test procedure: ANSI C63.10 section 11.10.2 Test mode: Compliance Verdict: PASS Date(s): 07-Jul-24 Temperature: 24 ºC Relative Humidity: 58 % Air Pressure: 1012 hPa Power: 3.6 VDC Remarks: Page 44 of 59 Table 7.5.2 Field strength measurement of peak spectral power density ASSIGNED FREQUENCY: 2400-2483.5 MHz TEST DISTANCE: 3 m TEST SITE: Semi anechoic chamber EUT HEIGHT: 0.8 m DETECTOR USED: Peak RESOLUTION BANDWIDTH: 3 kHz VIDEO BANDWIDTH: 10 kHz TEST ANTENNA TYPE: Double ridged guide (above 1000 MHz) MODULATION: GFSK BIT RATE: 1 Mbps Frequency, MHz Field strength, dB(V/m) EUT antenna gain, dBi Limit, dB(V/m) Margin, dB* Antenna polarization Antenna height, m Turn-table position**, degrees 2402 89.18 2.5 103.2 -14.02 V 1.1 -10 2440 88.46 2.5 103.2 -14.74 V 1.1 -13 2480 89.05 2.5 103.2 -14.15 V 1.0 -20 *- Margin = Field strength - EUT antenna gain - calculated field strength limit. **- EUT front panel refer to 0 degrees position of turntable. Reference numbers of test equipment used HL 4933 HL 3903 HL 5902 HL 7585 Full description is given in Appendix A. Report ID: ARARAD_FCC.54470_BLE_Rev1.docx Date of Issue: 14-Aug-24 Test specification: Section 15.247(e) / RSS-247 section 5.2(2), Maximum power spectral density Test procedure: ANSI C63.10 section 11.10.2 Test mode: Compliance Verdict: PASS Date(s): 07-Jul-24 Temperature: 24 ºC Relative Humidity: 58 % Air Pressure: 1012 hPa Power: 3.6 VDC Remarks: Page 45 of 59 Plot 7.5.1 Peak spectral power density at low frequency Plot 7.5.2 Peak spectral power density at mid frequency Report ID: ARARAD_FCC.54470_BLE_Rev1.docx Date of Issue: 14-Aug-24 Test specification: Section 15.247(e) / RSS-247 section 5.2(2), Maximum power spectral density Test procedure: ANSI C63.10 section 11.10.2 Test mode: Compliance Verdict: PASS Date(s): 07-Jul-24 Temperature: 24 ºC Relative Humidity: 58 % Air Pressure: 1012 hPa Power: 3.6 VDC Remarks: Page 46 of 59 Plot 7.5.3 Peak spectral power density at high frequency Report ID: ARARAD_FCC.54470_BLE_Rev1.docx Date of Issue: 14-Aug-24 Test specification: FCC Section 15.203/ RSS-Gen, Section 7.1.4, Antenna requirement Test procedure: Visual inspection / supplier declaration Test mode: Compliance Verdict: Date(s): 08-Jul-24 - 11-Jul-24 Temperature: 25 ºC Relative Humidity: 47 …

Text truncated - open the document above for the full version.

Arad Technologies Ltd. FCC ID: 2A7AA-CM2R1PIT4G IC: 28664-CM2R1PIT4G Page 1 of 3 SETUP PHOTOGRAPHS This document contains 3 photographs Arad Technologies Ltd. FCC ID: 2A7AA-CM2R1PIT4G IC: 28664-CM2R1PIT4G Page 2 of 3 Photograph No.1 Setup for spurious emission field strength measurements in the anechoic chamber below 30 MHz for Allegro Cellular Arad Technologies Ltd. FCC ID: 2A7AA-CM2R1PIT4G IC: 28664-CM2R1PIT4G Page 3 of 3 Photograph No.2 Setup for spurious emission field strength measurements in the anechoic chamber in 30 – 1000 MHz range for Allegro Cellular Photograph No.2 Setup for spurious emission field strength measurements in the anechoic chamber above 1000 MHz for Allegro Cellular