2A7AK-PL-D6-C12LED panel light

Specifications Cut-Out Size 6 inch Wattage 12 watts Input Volatge AC120V,60Hz Beam Angle 120° Light Sourece SMD LED Color Temperature RGB W2700K-6000K CRI 80Ra Lumens Output 900±5% Lumen Efficiency 75lm/w Halogen Equiv. 95 watts Dimmable 100%-5% (110V only) Dimming Tech. WIFI BLE Cerification cETLus,Energy Star Power Factor >0.9 Projected Life 50,000hrs at 70% Light Output Warranty 3 years Approved Location Damp Locations IC Rated Yes Air Tight Yes Housing Durable die-casting aluminum lamp housing with excellent heat dissipation,provide maximum airflow for the SMD LED light source. LED Characteristics This fixture contains SMD2835 LED module that offer high light color uniformity, 12 watts up to 950 lumens; Dimming This panel light is dimmable from 100% down to 5% smoothly, It is a smart speaker and mobile phone APP wireless dimming. Mounting Includes two spring loaded clips to attached to any ceiling material. Easy recessed installation without needing a stand pot light can. LED Driver Iron metal driver box with junction box and a reliable isolated constant current dimmable class II electronic LED driver inside. Quick Connect push-in terminals Three “Quick connect” push-in terminals for fast and easy wiring. Operating Temperature: -20°C~40°C (-4°F~104°F) Applications: Shenzhen Kingliming Technology Co.,Ltd Type IC 6" Slim Round LED Panel Lights Part #: PL-D6-C12 Dimensions & Installation Ordering Guide PL-D6-A12 - Luminous Intensity Distribution Curve 180 105 105 Illuminance at a Distance 90 75 60 45 30 15 55 110 165 220 275 0 90 75 60 45 15 Unit:30cd Dh Average Diffuse Angle(50%): 112.2° C0-C180 C90-C270 *Due to our continued efforts to improve our products, product specifications are subject to change without notice. Housing Color Color Temperature RGB 2700K 6000K WH:White BK:Black FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Shenzhen Kingliming Technology Limited Agent Authorization Company: Shenzhen Kingliming Technology Limited Address: 8/F, Xinlida Industrial Zone, Jun Xin Road, Niuhu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong China Product Name: LED panel light Trade Mark: KING Model Number(s): PL-D6-C12, PL-D4-A09,US-SD6F-1,US-SD4F-1 FCC ID: 2A7AK-PL-D6-C12 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2022-11-21 Name: liang Hu Title: manager Company: Shenzhen Kingliming Technology Limited

Shenzhen Kingliming Technology Limited Add: 8/F, Xinlida Industrial Zone, Jun Xin Road, Niuhu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong China Tel: 0755-32939032 Date: 2022-11-25 Dear Sir/Madam, We, Shenzhen Kingliming Technology Limited Hereby declares the following statement , PCB board, circuit, structure and internal of these model(s) are the same, Only model name and size were different for these model: Product Name: LED panel light Trade Mark: KING Model Number(s): PL-D6-C12, PL-D4-A09,US-SD6F-1,US-SD4F-1 FCC ID: 2A7AK-PL-D6-C12 Sincerely, Signature: Client’s name / title : liang Hu / manager Contact information / address : 8/F, Xinlida Industrial Zone, Jun Xin Road, Niuhu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong China Tel: 0755-32939032 E-Mail: [email protected]

Shenzhen Kingliming Technology Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022-11-21 Subject; Request for Confidentiality FCC ID: 2A7AK-PL-D6-C12 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: liang Hu Title: manager

Page 1 of 8 FCC ID: 2A7AK-PL-D6-C12 IC: 29592-PLD6C12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity External Photos of the EUT Fig. 1 Fig. 2 Model:PL-D6-C12,S-SD6F-1 Model:PL-D4-A09, US-SD4F-1 Page 2 of 8 FCC ID: 2A7AK-PL-D6-C12 IC: 29592-PLD6C12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 8 FCC ID: 2A7AK-PL-D6-C12 IC: 29592-PLD6C12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 8 FCC ID: 2A7AK-PL-D6-C12 IC: 29592-PLD6C12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8 Page 5 of 8 FCC ID: 2A7AK-PL-D6-C12 IC: 29592-PLD6C12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 9 Fig. 10 Page 6 of 8 FCC ID: 2A7AK-PL-D6-C12 IC: 29592-PLD6C12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 11 Fig. 12 Page 7 of 8 FCC ID: 2A7AK-PL-D6-C12 IC: 29592-PLD6C12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 13 Fig. 14 Page 8 of 8 FCC ID: 2A7AK-PL-D6-C12 IC: 29592-PLD6C12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 15

Page 1 of 1 FCC ID: 2A7AK-PL-D6-C12 IC: 29592-PLD6C12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity LABEL AND LOCATION (Size: L5.0cm x 4.0cm) Label Location LED panel light Model: PL-D6-C12 FCC ID: 2A7AK-PL-D6-C12 IC: 29592-PLD6C12

Page 1 of 4 FCC ID: 2A7AK-PL-D6-C12 IC: 29592-PLD6C12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Internal Photos of the EUT Fig. 1 Fig. 2 Page 2 of 4 FCC ID: 2A7AK-PL-D6-C12 IC: 29592-PLD6C12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 4 FCC ID: 2A7AK-PL-D6-C12 IC: 29592-PLD6C12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Antenna Page 4 of 4 FCC ID: 2A7AK-PL-D6-C12 IC: 29592-PLD6C12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7

Page 1 of 4 FCC ID: 2A7AK-PL-D6-C12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC RF Exposure Evaluation 1. Product Information FCC ID 2A7AK-PL-D6-C12 Product name LED panel light Model number PL-D6-C12 Additional Model No. PL-D4-A09,US-SD6F-1,US-SD4F-1 Model Declaration PCB board, structure and internal of these model(s) are the same, So no additional models were tested Power supply Input: AC 120V, 60Hz, 130mA, 12W Output: DC 31.5V, 400mA Modulation Type GFSK for Bluetooth V5.2 IEEE 802.11b: DSSS (CCK, DQPSK, DBPSK) IEEE 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK) IEEE 802.11n: OFDM (64QAM, 16QAM, QPSK, BPSK) Antenna Type PCB Antenna Antenna Gain 1.94Bi(Max.) Hardware version / Software version / FCC Operation frequency 2402MHz-2480MHz 2412MHz-2462MHz Exposure category General population/uncontrolled environment EUT Type Production Unit Device Type Mobile Devices 2. Evaluation Method Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as mobile device whereby a distance of 0.2m normally can be maintained between the user and the device, and below RF Permissible Exposure limit shall comply with. In accordance with KDB447498D01 for Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modelled or measured field strengths or power density, is ≤ 1.0. The MPE ratio of each antenna is determined at the minimum test separation distance required by the operating configurations and exposure conditions of the host device, according to the ratio of field strengths or power density to MPE limit, at the test frequency. Either the maximum peak or spatially averaged results from measurements or numerical simulations may be used to determine the MPE ratios. Spatial averaging does not apply when MPE is estimated using simple calculations based on far-field plane-wave equivalent conditions. The antenna installation and operating requirements for the host device must meet the minimum test separation distances required by all antennas, in both standalone and simultaneous transmission operations, to satisfy compliance. Page 2 of 4 FCC ID: 2A7AK-PL-D6-C12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 3. Limit 3. 1 Refer Evaluation Method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General 1 RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: mobile devices 3. 2 Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane-wave equivalent power density 4. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 5. Antenna Information Ceramics Antenna can only use antennas certificated as follows provided by manufacturer; Internal Identification Antenna type and antenna number Operate frequency band Maximum antenna gain Note Antenna PCB Antenna 2400MHz-2500MHz 1.94Bi BT WIFI Antenna Page 3 of 4 FCC ID: 2A7AK-PL-D6-C12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 6. Conducted Power < BT LE Max Conducted Power > Mode Channel Frequency(MHz) Max Conducted Power (dBm) GFSK 0 2402 3.23 19 2440 2.98 39 2480 2.12 <2.4GWLAN Max Conducted Power > Mode Channel Frequency(MHz) Max Conducted Power (dBm) IEEE 802.11b 1 2412 14.93 6 2437 14.04 11 2462 13.92 IEEE 802.11g 1 2412 13.78 6 2437 12.73 11 2462 12.82 IEEE 802.11n HT20 1 2412 12.44 6 2437 12.28 11 2462 13.47 IEEE 802.11n HT40 3 2422 11.95 6 2437 11.48 9 2452 10.93 7. Manufacturing Tolerance <BT LE> GFSK (Peak) Channel Channel 0 Channel 19 Channel 39 Target (dBm) 3.0 2.0 2.0 Tolerance ±(dB) 1.0 1.0 1.0 <2.4G WIFI> 11B (Peak) Channel Channel 1 Channel 6 Channel 11 Target (dBm) 14.0 14.0 13.0 Tolerance ±(dB) 1.0 1.0 1.0 11G (Peak) Channel Channel 1 Channel 6 …

Text truncated - open the document above for the full version.

Page 1 of 34 FCC ID: 2A7AK-PL-D6-C12 Report No.: LCSA102722034EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT For Shenzhen Kingliming Technology Limited LED panel light Test Model: PL-D6-C12 Additional Model No.: PL-D4-A09,US-SD6F-1,US-SD4F-1 Prepared for : Shenzhen Kingliming Technology Limited Address : 8/F, Xinlida Industrial Zone, Jun Xin Road, Niuhu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : November 03, 2022 Number of tested samples : 2 Sample No. : A102722034-1, A102722034-2 Serial number : Prototype Date of Test : November 03, 2022 ~ November 10, 2022 Date of Report : November 11, 2022 Page 2 of 34 FCC ID: 2A7AK-PL-D6-C12 Report No.: LCSA102722034EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT FCC CFR 47 PART 15 C(15.247) Report Reference No. ................. : LCSA102722034EA Date of Issue ................................... : November 11, 2022 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ........................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure ........... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name .......................... : Shenzhen Kingliming Technology Limited Address ........................................... : 8/F, Xinlida Industrial Zone, Jun Xin Road, Niuhu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong China Test Specification Standard .......................................... : FCC CFR 47 PART 15 C(15.247) Test Report Form No. ................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. EUT Description. ........................... : LED panel light Trade Mark ...................................... : KING Test Model ...................................... : PL-D6-C12 Ratings ............................................ : Input: AC 120V, 60Hz, 130mA, 12W Output: DC 31.5V, 400mA Result ............................................ : Positive Compiled by: Supervised by: Approved by: Jack Liu/ Administrator Cary Luo/ Technique principal Gavin Liang/ Manager Page 3 of 34 FCC ID: 2A7AK-PL-D6-C12 Report No.: LCSA102722034EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC -- TEST REPORT Test Model............................... : PL-D6-C12 EUT......................................... : LED panel light Applicant............................... : Shenzhen Kingliming Technology Limited Address.................................. : 8/F, Xinlida Industrial Zone, Jun Xin Road, Niuhu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Shenzhen Kingliming Technology Limited Address................................... : 8/F, Xinlida Industrial Zone, Jun Xin Road, Niuhu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong China Telephone............................... : / Fax.......................................... : / Factory................................... : Shenzhen Kingliming Technology Limited Address................................... : 8/F, Xinlida Industrial Zone, Jun Xin Road, Niuhu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong China Telephone............................... : / Fax.......................................... : / Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCSA102722034EA November 11, 2022 Date of issue Page 4 of 34 FCC ID: 2A7AK-PL-D6-C12 Report No.: LCSA102722034EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Revision History Report Version Issue Date Revision Content Revised By 000 November 11, 2022 Initial Issue -- Page 5 of 34 FCC ID: 2A7AK-PL-D6-C12 R…

Text truncated - open the document above for the full version.

Page 1 of 37 FCC ID: 2A7AK-PL-D6-C12 Report No.: LCSA102722034EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT For Shenzhen Kingliming Technology Limited LED panel light Test Model: PL-D6-C12 Additional Model No.: PL-D4-A09,US-SD6F-1,US-SD4F-1 Prepared for : Shenzhen Kingliming Technology Limited Address : 8/F, Xinlida Industrial Zone, Jun Xin Road, Niuhu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : November 03, 2022 Number of tested samples : 2 Sample number : A102722034-1, A102722034-2 Serial number : Prototype Date of Test : November 03, 2022 ~ November 10, 2022 Date of Report : November 11, 2022 Page 2 of 37 FCC ID: 2A7AK-PL-D6-C12 Report No.: LCSA102722034EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT FCC CFR 47 PART 15 C(15.247) Report Reference No. ................. : LCSA102722034EB Date of Issue ................................... : November 11, 2022 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ........................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure ........... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name .......................... : Shenzhen Kingliming Technology Limited Address ........................................... : 8/F, Xinlida Industrial Zone, Jun Xin Road, Niuhu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong China Test Specification Standard .......................................... : FCC CFR 47 PART 15 C(15.247) Test Report Form No. ................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. EUT Description. ........................... : LED panel light Trade Mark ...................................... : KING Test Model ...................................... : PL-D6-C12 Ratings ............................................ : Input: AC 120V, 60Hz, 130mA, 12W Output: DC 31.5V, 400mA Result ............................................ : Positive Compiled by: Supervised by: Approved by: Jack Liu/ Administrator Cary Luo/ Technique principal Gavin Liang/ Manager Page 3 of 37 FCC ID: 2A7AK-PL-D6-C12 Report No.: LCSA102722034EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC -- TEST REPORT EUT......................................... : LED panel light Test Model............................... : PL-D6-C12 Applicant............................... : Shenzhen Kingliming Technology Limited Address.................................. : 8/F, Xinlida Industrial Zone, Jun Xin Road, Niuhu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Shenzhen Kingliming Technology Limited Address................................... : 8/F, Xinlida Industrial Zone, Jun Xin Road, Niuhu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong China Telephone............................... : / Fax.......................................... : / Factory................................... : Shenzhen Kingliming Technology Limited Address................................... : 8/F, Xinlida Industrial Zone, Jun Xin Road, Niuhu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong China Telephone............................... : / Fax.......................................... : / Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCSA102722034EB November 11, 2022 Date of issue Page 4 of 37 FCC ID: 2A7AK-PL-D6-C12 Report No.: LCSA102722034EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Revision History Report Version Issue Date Revision Content Revised By 000 November 11, 2022 Initial Issue -- Page 5 of 37 FCC ID: 2A7AK-PL-D6-C1…

Text truncated - open the document above for the full version.

CB2L Antenna Specification 1. Antenna Inform…

Text truncated - open the document above for the full version.