2A7AZ-HABLE1Hable One

1 The Training guide to the Hable One (IOS) This training guide will take you step by step through all functionalities of the Hable One. First, it explains how to get started and how to set up the Hable One correctly. Then it explains how to navigate, type, and edit texts on your phone, how to become faster by using different shortcuts and finally how the Hable Menu works. Here you can find an overview of the different chapters : 1. Setting up for the first time 2. Operating the phone 3. Typing 4. Editing text 5. Shortcuts 6. Working with the Hable Menu You can set your own pace based on how fast or slow you get through the document. For complete beginners, we recommend that you take about 15 minutes of your day to work through one chapter every day. Have fun with this starter guide! 2 1. First time set-up This video explains in full what the Hable One is. With the help of this starter guide, you will be able to use the controller quickly. VoiceOver gives you audio feedback while using the Hable One. First, we will explain how to hold, set up and use the Hable One. 1.1. What’s in the box In the box you will find the following: ● The Hable One controller ● USB C charging cable ● Lanyard strap for your wrist ● Warranty and Safety document 1.2. The Hable One and holding the Hable One The Hable One has one flat side and one side with buttons. Furthermore there is a power slider on the top side of the Hable One. When the power slider is facing the ceiling and the side with the buttons is pointing away from you, you can turn the Hable One on by sliding the power slider to the right. On the bottom of the Hable, there is a charging port. This is also used when the Hable needs to be updated. On the bottom right of the Hable One, there is a place to attach the lanyard, which is also included in the box. When using the Hable One, hold the controller in the air with both hands; do not place it on a table or desk. If you prefer to lay it down, you can, but we recommend you turn the buttons around. See the "Hable Menu" section on how to do this. Make sure the power slider is facing the ceiling. The flat back side should point towards you, this way the buttons will automatically point away from you. 3 Hold the controller with both hands. You do this by wrapping your hands around the short left and right sides of the Hable One. If you do this correctly, your index, middle and ring fingers will automatically fall on the six Braille input buttons. Note that the buttons point away from you, and you press them towards you. From now on, each button is indicated by numbers. The six small buttons are numbered like a Braille cell. The three buttons on your left hand are numbered as one, two and three, with button one being closest to the power slider and button three being furthest away. The three buttons on your right hand are numbered four, five and six, with button four being closest to the power slider and button six being furthest away. Place the left-hand index finger, the middle finger, and the ring finger on buttons one, two and three respectively. Place the right-hand index, middle and ring fingers on the four, five and six buttons respectively. There are two longer buttons, which are the function buttons. On the left side of your left index finger, you will find button seven. On the right side of your right index finger, you will find button eight. 1.3. First time connecting to the phone Make sure that VoiceOver is enabled on your phone. To do this go to your phone settings > Accessibility > VoiceOver > Turn on VoiceOver or use the accessibility shortcut to enable it. Charging of the Hable One When you receive the Hable One, you can immediately start using it because it is already charged up enough. When the Hable One is out of battery, you can charge it with the cable that you received in the box. When it is fully empty it takes 4 three hours to charge it completely. The charging port is on the bottom side of the Hable One, when the charger is connected, there will be 3 short vibrations. Bluetooth When you hold the device in the correct position, you turn the Hable One on by sliding the slide switch all the way to the right. The Hable One will vibrate twice when it is switched on. This indicates that the device is charged and ready to use. The Hable One pairs through Bluetooth. To pair the Hable One with your smartphone, go to settings on your phone then turn on Bluetooth. You can also use Siri to turn on Bluetooth on your device. Look for the name of the controller "Hable One", in the list of Bluetooth devices. Once you have found the device name, double click to start pairing. If the controller is not visible, try turning the Hable One off and on again. If the pairing was successful, the Hable One will vibrate to indicate that it is connected. The Hable One is now ready to use. Correct Modus The first time your Hable One connects to your phone, it automatically recognises whether it is in iOS or Android mode. If you have previously paired it with an Android phone, you can change the mode manually. To find out how to do this, go to the Hable Menu section in this manual. Language The Hable One can be set to several languages. Before we send the Hable One to you, we already set it to the right language for you. If you want to know how to change the language, please check the Hable Menu section of the user manual. 5 2. Operating the IOS phone Navigating through the phone with the Hable One is easy to learn. In this section you will learn the basics on how to move through your phone. You can go to the next and previous item, activate an item, go back and make a shortcut to the home screen. Some functions will follow. Also a short explanation will be given on how to perform them on the Hable One and an example of where you would use it. If any of the functions don’t work, this might have something to do with quick navigation being turned off. You normally don’t have to do anything with this function, unl…

Text truncated - open the document above for the full version.

Agent letter FCC attestation statement Kiwa Page of 2 1 RF_753, Issue 2 15-02-2023 [PLACE ON APPLICANT/COMPANY LETTERHEAD] U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands Company name: FCC US Agent, LLC FRN: 0033402884 Contact person name: Tim Payne Street address: 3722 Illinois Avenue ZIP/City/State Saint Charles, IL, 60174, USA Te l e p h o n e n u m b e r : 708-571-3148 Email address: [email protected] Signature: Date: 10/24/2023 Company name: Hable One BV Grantee Code: 2A7AZ Agent letter FCC attestation statement Kiwa Page of 2 2 RF_753, Issue 2 15-02-2023 [PLACE ON APPLICANT/COMPANY LETTERHEAD] Revision Record Sheet: Issued/modified by : Richard van der Meer Function : Certification assessor Revision :02 Date : 15-02-2023 Verified by : Willem Jan Jong Function : Team Lead Date : 16-02-2023 Released by :Axel Gase Function :Manager Quality Assurance Date of release: : __-02-2023 FCC ID: 2A7AZ-HABLE1 Contact person name: Ayushman Talwar Street address: To r e n a l l e e 2 0 ZIP/City/State/Country 5617BC / Eindhoven, The Netherlands Te l e p h o n e n u m b e r : +31 687595573 Email address: [email protected] Signature: Date: March 14, 2023 RevisionSection number Page numberDateRemark(s)issued by 0107-02-20231 st versionRvdM 02115-05-2023Added FRN to Agent detailsRvdM

Covered list attestation FCC application letter Kiwa Page of 2 1 RF_755_02 15-02-2023 Ayush Certification Application Attestation Statements Hable One BV Subject: FCC ID: 2A7AZ-HABLE1 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) Hable One BV certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the 1 FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) Hable One BV (“the applicant”) certifies that, as of the date of the filing of this application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Torenallee 20 5617BC Eindhoven, The Netherlands Date: December 06, 2023 City: Eindhoven Name (2) : Ayushman Talwar Function: CEO Telephone number: +31 687595573 Email address: [email protected] - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s 1 website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double click on the appropriate box and select ‘’checked” then “OK” Covered list attestation FCC application letter Kiwa Page of 2 2 RF_755_02 15-02-2023 Ayush Revision Record Sheet: Issued/modified by : Richard van de Meer Function : Certification assessor Revision : 02 Date : 15-02-2023 Verified by : Willem Jan Jong Function : Team Lead Date : 16-02-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : __-02-2023 Signature: RevisionSection number Page number DateRemark(s)issued by 0107-02-20231 st versionRvM 02115-02-2023Changed Applicant to Company and added “Subject: FCC ID: “ RvdM

FCC, Request for non-disclosure Date: 13-July-2022 RF_501, Issue 9 Page 1 of 1 Company Name: Hable One BV Address: Torenallee 20 City: Eindhoven Country: the Netherlands To: Telefication B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: 2A7AZ-HABLE1 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Due to competition interests, this may not be released yet. Date: 14 March 2023 Name and signature of applicant: Ayushman Talwar Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Page 1 of 4 External Photos Product name : Hable One Applicant : Hable One BV FCC ID : 2A7AZ-HABLE1 IC ID : 28649-HABLE! Project number: P000133072 External Photos Ver 1.00 Project number: P000133072 External Photos Ver 1.00 Page 2 of 4 Table of Contents 1 External Photos ........................................................................................................................................ 3 Project number: P000133072 External Photos Ver 1.00 Page 3 of 4 1 External Photos Top view Bottom view Project number: P000133072 External Photos Ver 1.00 Page 4 of 4 Side views

S�cker packaging 904 Hable ONE label: Dymo 36 x 89mm black 2021-06-24DZ- 106289-904-B_S�cker packaging.pdf 1062892101 X O O B Bbold typeface removed, contact info, added ver�cal tolerance + alignment2021-07-26DZ p l e a s e r e c y c l e Product ID: Hable One Serial number: yyww#### Designed and Made in the Netherlands Hable One BV contact us via iamhable.com/support p l e a s e r e c y c l e Product ID: Hable One Serial number: yyww#### Designed and Made in the Netherlands Hable One BV contact us via iamhable.com/support p l e a s e r e c y c l e Product ID: Hable One Serial number: yyww#### Designed and Made in the Netherlands Hable One BV contact us via iamhable.com/support after FCC approval Galano Grotesque Medium font size: 9pt 36mm 89mm Galano Grotesque Medium, size: 9pt Galano Grotesque Italic, size: 9pt center align print o-center max. 0.5mm main alignment

S�cker address B C material changed2021-06-30DZ- changed font size, removed bold typeface, contact informa�on changed2021-07-26DZ- 303 Hable ONE label: PT700 110mm black ink: SR10 silver black 2021-05-05DZ- 106289-303-C_S�cker address.pdf 1062892101 O O X C scale 2:1 Galano Grotesque Medium font size: 6pt print o-center max. 0.5mm 10mm 50mm 5mm Hable One BV iamhable.com/support Hable One BV iamhable.com/support logos centered vertically Hable One BV iamhable.com/support future version after FCC approval ==

Page 1 of 4 Internal Photos Product name : Hable One Applicant : Hable One BV FCC ID : 2A7AZ-HABLE1 IC ID : 28649-HABLE! Project number: P000133072 Internal photos Ver 1.00 Project number:P000133072 Internal photos Ver 1.00 Page 2 of 4 Table of Contents 1 Internal Photos ........................................................................................................................................ 3 Project number:P000133072 Internal photos Ver 1.00 Page 3 of 4 1 Internal Photos PCB top view PCB bottom view Project number:P000133072 Internal photos Ver 1.00 Page 4 of 4 RF module view

Page 1 of 7 FCC SAR Exclusion Report Product name : Hable One Applicant : Hable One BV FCC ID : 2A7AZ-HABLE1 Test report No. : P000133072 006 Ver 1.0 - Report number: P000133072 006 Ver 1.0 Page 1 of 7 Laboratory information Accreditation Telefication complies with the accreditation criteria for test laboratories as laid down in ISO/IEC 17025:2017. The accreditation covers the quality system of the laboratory as well as the specific activities as described in the authorized annex bearing the accreditation number L021 and is granted on 30 November 1990 by the Dutch Council For Accreditation (RvA: Raad voor Accreditatie). Telefication is designated by the FCC as an Accredited Test Firm for compliance testing of equipment subject to Certification under Parts 15 & 18. The Designation number is: NL0001. Telefication is a Wireless Device Testing laboratory recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements. The Industry Canada company number for Telefication is: 4173A. Telefication is a registered Conformity Assessment body (CAB) under the Japan-EC MRA (Agreement on Mutual Recognition between Japan and the European Community). The registration number is: 201. Documentation The test report must always be reproduced in full; reproduction of an excerpt only is subject to written approval of the testing laboratory. The documentation of the testing performed on the tested devices is archived for 10 years at Telefication Netherlands. Testing Location Test Site Kiwa Telefication BV Test Site location Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Tel. +31 88998 3393 Test Site FCC NL0001 CABID NL0001 Report number: P000133072 006 Ver 1.0 Page 2 of 7 Revision History Version Date Remarks By V0.5 06-09-2022 Draft RvB V1.0 01-12-2022 Initial release RvB Report number: P000133072 006 Ver 1.0 Page 3 of 7 Table of Contents Revision History ............................................................................................................................................... 2 1 General Description ................................................................................................................................. 4 1.1 Applicant ............................................................................................................................................... 4 1.2 Manufacturer ........................................................................................................................................ 4 1.3 Tested Equipment Under Test (EUT) ..................................................................................................... 4 1.4 Applicable standards ............................................................................................................................. 4 1.5 Conclusions ........................................................................................................................................... 5 2 SAR exclusion Evaluation ......................................................................................................................... 6 2.1 Transmitter specifications ..................................................................................................................... 6 2.2 Evaluation calculations .......................................................................................................................... 7 2.3 Conclusion ............................................................................................................................................. 7 Report number: P000133072 006 Ver 1.0 Page 4 of 7 1 General Description 1.1 Applicant Client name: Hable One BV Address Torenallee, 20 Eindhoven, The Netherlands Zip code: 5671 BC Telephone: +31 687595573 E-mail: [email protected] Contact name: Mr. T. Ayushman 1.2 Manufacturer Manufacturer name: Hable One BV Address: Torenallee, 20 Eindhoven, The Netherlands Zip code: 5671 BC Telephone: +31 687595573 E-mail: [email protected] Contact name: Mr. T. Ayushman 1.3 Tested Equipment Under Test (EUT) Product name: Hable One Brand name: Hable Product type: Wireless phone keyboard Variant model(s): -- Software version: -- Hardware version: -- Date of receipt 27-07-2022 Tests started: 17-08-2022 Testing ended: 17-08-2022 1.4 Applicable standards 47 CFR § 1.1307 (b)(1)(i)(A) Report number: P000133072 006 Ver 1.0 Page 5 of 7 1.5 Conclusions The sample of the product showed NO NON-COMPLIANCES to the specifications stated in paragraph 1.4 of this report. The results of the test as stated in this report, are exclusively applicable to the product items as identified in this report. Telefication accepts no responsibility for any properties of product items in this test report, which are not supported by the tests as specified in paragraph 1.4 “Applicable standards”. Assessment is performed by: Name : ing. R. van Barneveld Review of assessment methods and report by: Name : P. van Wanrooij The above conclusions have been verified by the following signatory: Date : 02-12-2022 Name : P. van Wanrooij Function : Test Engineer Signature : Report number: P000133072 006 Ver 1.0 Page 6 of 7 2 SAR exclusion Evaluation 2.1 Transmitter specifications BLE Variable (unit) Value Symbol Conducted time-averaged output power (mW) 0.76* P Time-averaged output power ERP (mW) 0.76 P ERP Operating frequency range (MHz) 2440 f Separation distance (cm) 0.5 d Separation distance (m) 0.0005 R *Note: taken from test report P000133072 004 Report number: P000133072 006 Ver 1.0 Page 7 of 7 2.2 Evaluation calculations Transmitter 1 Transmitter 1 is evaluated according to method B of KDB 447498 D04 v01 Method B: 푃 푡ℎ ( 푚푊 ) ={ 퐸푅푃 20푐푚 ( 푑 20푐푚 ) 푥 푑≤20 푐푚 퐸푅푃 20푐푚 20 푐푚<푑≤40 푐푚 Where: 푥= −log 10 ( 60 퐸푅푃 20푐푚 ∗ √ 푓 ) 퐸푅푃 20푐푚 ( 푚푊 ) ={ 2040∗푓0.3 퐺퐻푧≤푓<1.5 퐺퐻푧 3060 1.5 퐺퐻푧≤푓≤6.0 퐺퐻푧 Filling in the values of d (cm) and f (GHz) as reported in clause 2.1 in the equations above gives the result: P th =2…

Text truncated - open the document above for the full version.

FCC and IC Test report for parts 15.207, 15.209, 15.247 RSS-247, RSS-Gen Product name : Hable One Applicant : Hable One BV FCC ID : 2A7AZ-HABLE1 IC : 28649-HABLE1 Test report No. : P000133072 004 v3.00 Report number: P000133072 004 v3.00 Page 1 of 30 Laboratory information Accreditation Telefication complies with the accreditation criteria for test laboratories as laid down in ISO/IEC 17025:2017. The accreditation covers the quality system of the laboratory as well as the specific activities as described in the authorized annex bearing the accreditation number L021 and is granted on 30 November 1990 by the Dutch Council For Accreditation (RvA: Raad voor Accreditatie). Telefication is designated by the FCC as an Accredited Test Firm for compliance testing of equipment subject to Certification under Parts 15 & 18. The Designation number is: NL0001. Telefication is a Wireless Device Testing laboratory recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements. The Industry Canada company number for Telefication is: 4173A. The CABID is NL0001. Telefication is a registered Conformity Assessment body (CAB) under the Japan-EC MRA (Agreement on Mutual Recognition between Japan and the European Community). The registration number is: 201. Documentation The test report must always be reproduced in full; reproduction of an excerpt only is subject to written approval of the testing laboratory. The documentation of the testing performed on the tested devices is archived for 10 years at Telefication Netherlands. Testing Location Test Site Kiwa Telefication BV Test Site location Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Tel. +31 88998 3393 Test Site FCC NL0001 CABID NL0001 Report number: P000133072 004 v3.00 Page 2 of 30 Revision History Version Date Remarks By v0.50 25-08-2022 First draft RvB v1.00 05-09-2022 Release version RvB v2.00 01-12-2022 Added Rf output power measurement RvB v3.00 11-04-2023 Implemented assessor comments RvB Report number: P000133072 004 v3.00 Page 3 of 30 Table of Contents Revision History ............................................................................................................................................... 2 Summary of Test results .................................................................................................................................. 5 1 General Description ................................................................................................................................. 6 1.1 Applicant ............................................................................................................................................... 6 1.2 Manufacturer ........................................................................................................................................ 6 1.3 Tested Equipment Under Test (EUT) ..................................................................................................... 6 1.4 Product specifications of Equipment under test ................................................................................... 7 1.5 Environmental conditions ..................................................................................................................... 7 1.6 Measurement standards ....................................................................................................................... 7 1.7 Applicable standards ............................................................................................................................. 7 1.8 Observation and remarks ...................................................................................................................... 7 1.9 Conclusions ........................................................................................................................................... 8 2 Test configuration of the Equipment Under Test ...................................................................................... 9 2.1 Test mode ............................................................................................................................................. 9 2.2 Test setups ............................................................................................................................................ 9 2.3 Equipment used in the test configuration .......................................................................................... 12 2.4 Sample calculations ............................................................................................................................. 12 3 Test results ............................................................................................................................................. 13 3.1 Output Power Measurement .............................................................................................................. 13 3.1.1 Limit ................................................................................................................................................ 13 3.1.2 Measurement instruments ............................................................................................................. 13 3.1.3 Test setup ....................................................................................................................................... 13 3.1.4 Test procedure ................................................................................................................................ 13 3.1.5 Test results of Output Power Measurement .................................................................................. 13 3.2 Radiated spurious emissions ............................................................................................................... 14 3.2.1 Limit .........................................................................................................................................…

Text truncated - open the document above for the full version.

FCC and IC Test report for parts 15.107, 15.109 and ICES-003 Product name : Hable One Applicant : Hable One BV Test report No. : P000133072 005 v1.00 Report number: P000133072 005 v1.00 Page 1 of 19 Laboratory information Accreditation Telefication complies with the accreditation criteria for test laboratories as laid down in ISO/IEC 17025:2017. The accreditation covers the quality system of the laboratory as well as the specific activities as described in the authorized annex bearing the accreditation number L021 and is granted on 30 November 1990 by the Dutch Council For Accreditation (RvA: Raad voor Accreditatie). Telefication is designated by the FCC as an Accredited Test Firm for compliance testing of equipment subject to Certification under Parts 15 & 18. The Designation number is: NL0001. Telefication is a Wireless Device Testing laboratory recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements. The Industry Canada company number for Telefication is: 4173A. Telefication is a registered Conformity Assessment body (CAB) under the Japan-EC MRA (Agreement on Mutual Recognition between Japan and the European Community). The registration number is: 201. Documentation The test report must always be reproduced in full; reproduction of an excerpt only is subject to written approval of the testing laboratory. The documentation of the testing performed on the tested devices is archived for 10 years at Telefication Netherlands. Testing Location Test Site Kiwa Telefication BV Test Site location Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Tel. +31 88998 3393 Test Site FCC NL0001 CABID NL0001 Report number: P000133072 005 v1.00 Page 2 of 19 Revision History Version Date Remarks By v0.50 26-08-2022 First draft RvB v1.00 05-09-2022 Release version RvB Report number: P000133072 005 v1.00 Page 3 of 19 Table of Contents Revision History ............................................................................................................................................... 2 Summary of Test results .................................................................................................................................. 4 1 General Description ................................................................................................................................. 5 1.1 Applicant ............................................................................................................................................... 5 1.2 Manufacturer ........................................................................................................................................ 5 1.3 Tested Equipment Under Test (EUT) ..................................................................................................... 5 1.4 Product specificati…

Text truncated - open the document above for the full version.