2A7GZ-DREAMACZ11DREAM MACHINE 1

DREAM MACHINE TECHNOLOGY 27 rue de Fontarabie 75020 PARIS https://dream-machine.tech [email protected] Dream Machine by Brice Battung Kevin Finel Designed in France OUR GENERATION WAS BORN TOO LATE TO EXPLORE NEW CONTINENTS, AND TOO EARLY TO EXPLORE DISTANT GALAXIES, BUT YOU WERE BORN AT THE PERFECT TIME TO EXPLORE YOUR INNER UNIVERSE ENTER THE DREAM DREAM MACHINE USER GUIDE Après avoir téléchargé l'application DREAM MACHINE sur GooglePlay ou AppStore. Branchez votre Dream Machine pour une mise sous tension électrique avant d'appuyer sur le bouton unique en haut de la Dream Machine. Démarrez votre application. Une connexion Bluetooth s'établie automatiquement. Si aucune connexion ne s'établie, rendez-vous dans l'onglet paramètres de l'application Dream Machine pour une connexi on manuelle. Votre application est maintenant connectée à la Dream Machine. Naviguez dans votre application pour choisir votre session. Elle peut faire partie d'un programme de plusieurs sessions, ou elle peut être une session unique. Une session est une séquence stroboscopique lumineuse. Tel un voyage, elle invitera votre mental à suivre de nouveaux rythmes liés à l'objectif de la session. Certaines sessio ns sont conçues avec des audios: vous pouvez les écouter ou non. Pendant une session, à l'aide d'un casque audio, nous vous invitons à écouter l'audio designé pour la session ou écouter une musique de votre choix pour une plus grande immersion. Cliquez sur le bouton play sur la fenêtre de lecture. Votre session démarre après quelques secondes. Il est important de fermer les yeux pour vivre l'expérience. L'o eil fermé perçoit toujours les rythmes lumineux émis par la Dream Machine. Instantanément, des visions kaléidoscopiques apparaissent. Les portes d'une nouvelle perception s'ouvrent. After downloading the DREAM MACHINE app from GooglePlay or AppStore. Plug in your Dream Machine for power on before pressing the single button on the top of the Dream Machine. Start your app. A Bluetooth connection is established automatically. If no connection is established, go to the settings tab of the Dream Machine app for a manual connection. Your app is now connected to the Dream Machine. Navigate in your application to choose your session. It can be part of a multi-session program, or it can be a single session. A session is a light stroboscopic sequence. Like a journey, it will invite your mind to follow new rhythms linked to the objective of the session. Some sessions are designed with audios: you can listen to them or not. During a session, using headphones, we invite you to listen to the audio designed for the session or listen to the music of your choice for a greater experience. Click the play button on the play screen. Your session starts after a few seconds. It is important to close your eyes to live the experience. The closed eye still perceives the luminous rhythms emitted by the Dream Machine. Instantly, kaleidoscopic visions appears. Doors of a new perception are opening. CONNECT SELECT YOUR DREAM CLOSE YOUR EYES... AND SEE 1 2 3 GUIDE SCAN THIS QR CODE TO ACCESS THE FULL MANUAL SCANNEZ CE QR CODE POUR ACCEDER AU MANUEL COMPLET ENJOY THE EXPERIENCE L’utilisation de la DREAM MACHINE nécessite l’installation de l’application « DREAM MACHINE » iOs ou Android ainsi qu’une connexion internet. DREAM MACHINE requires the installation of the "DREAM MACHINE" application iOs or Android as well as an internet connection. Avant toute utilisation de la DREAM MACHINE, prenez connaissance des précautions d’utilisation: DREAM MACHINE est un dispositif lumineux stroboscopique proposant à l’utilisateur des stimulations visuelles intenses à vivre les yeux fermés, face au dispositif. Certaines personnes sont susceptibles de developper des crises d’épilepsie comportants, le cas échéant, des pertes de conscience à la vue de certain s types de stimulations lumineuses fortes notamment. Ces personnes peuvent subir des crises lorsqu’elles s’exposent aux stimulations visuelles de la DREAM MACHINE, alors même qu’elles n’ont pas d’antécédents médicaux ou n’ont jamais été sujettes à des crises d’épilepsie. Si vous-même ou un membre de votre famille avez déjà présenté des symptômes liés à l’épilepsie (avec ou sans convulsions) en présence de stimulations lumineuses, consultez un médecin avant toute utilisation. Lors de l’utilisation de la DREAM MACHINE, les effets stroboscopiques peuvent être perçus par effet de réflexion sur les surfaces du lieu d’utilisation, veillez à porter une attention particulière à votre entourage se trouvant dans la même pièce. Si vous-même ou une personne a proximité présentez un des symptômes suivants : vertige, tr ouble de la vision, contraction involontaire des muscles, trouble de l’orientation, mouvement involontaire ou convulsions, perte momentanée de conscience, il faut cesser immédiatement l’utilisation de la DREAM MACHINE et consulter un médecin. L’utilisation de la DREAM MACHINE est déconseillée à toute personne présentant des troubles psychiques, neurologiques, pathologies oculaires, aux enfants et aux femm es enceintes. Si vous avez un doute, nous vous invitons à prendre l’avis d’un médecin avant toute utilisation de la DREAM MACHINE. Before using the Dream Machine, please read the following disclaimer carefully: The DREAM MACHINE is a stroboscopic light device that induces intense visual stimulation for the user when facing the device with eyes closed. Some people are likely to experience epileptic seizur es, involving loss of consciousness when exposed to certain strong light stimulations. These people may have no past medical history of known epileptic susceptibility nor have experienced previous seizures before the use of the DREAM MACHINE. If you or a member of your family have already exhibited symptoms related to epilepsy (with or without convulsions) in the presence of light stimulation, please con sult your doctor before using the DREAM MACHINE. When using the device, be mindful of any …

Text truncated - open the document above for the full version.

DREAM MACHINE TECHNOLOGY 2023.11.30 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2A7GZ-DREAMACZ11 [DREAM MACHINE TECHNOLOGY] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Applicant printed name) Brice Battung DREAM MACHINE TECHNOLOGY 2023.11.30 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2A7GZ-DREAMACZ11 [DREAM MACHINE TECHNOLOGY] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Brice Battung

DREAM MACHINE TECHNOLOGY 2023.11.30 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: DREAM MACHINE 1 Trademark: Dream Machine Technology MODEL : DREAMACZ11 FCC ID: 2A7GZ-DREAMACZ11 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Brice Battung/ CEO Contact information / address: 27 rue de Fontarabie 75020 PARIS - FRANCE

DREAM MACHINE TECHNOLOGY 2023.11.30 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Brice Battung/ CEO Contact information / address: 27 rue de Fontarabie 75020 PARIS - FRANCE

External Photos Adapter 1 Adapter 1 Adapter 1 Adapter 2 Adapter 2

Screen silk color: Pantone 431C 备注：供应商在印刷时，请不要印刷日期，由工厂安排镭射日期。 50mm 25mm S220604 DREAM MACHINE 1 Model: DREAMACZ11 12V , 3A Max. 36W IK06 IP20 FCC ID: 2A7GZ-DREAMACZ11 Dream Machine Technology 27 Rue de Fontarabie 75020 PARIS – FRANCE Designed in France Made in China Laser Crafts S: Manufacturer Year of Manufacturing S 2 2 0 6 0 4Fonts: Arial 5pt Week of the month Month of Manufacturing S220604 DREAM MACHINE 1 Model: DREAMACZ11 12V , 3A Max. 36W IK06 IP20 FCC ID: 2A7GZ-DREAMACZ11 Dream Machine Technology 27 Rue de Fontarabie 75020 PARIS – FRANCE Designed in France Made in China Update PrintingB62022.09.05joly 1C 砂面PC+3Ｍ9448 Dream Machine P-06-00136 B Description Pos Drafted By RevDate HYP001 Product label

Internal Photos Antenna

FCC §15.247 (i), §2.1091 – RF Exposure FCC ID: 2A7GZ-DREAMACZ11 Applied procedures / limit According to FCC §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Note: ƒ is frequency in MHz * = Power density limit is applicable at frequencies greater than 100 MHz Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz * = Plane-wave equivalent power density MPE PREDICTION Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna, R=0.2m TEST RESULTS Conclusion: For the max result : 0.00063≤ 1.0, compliance with FCC's RF Exposure Tune up Produce power Maximu m peak output power (dBm) Output power to antenn a (mW) Antenna Gain (numeric) Power Density (S) (mW/ cm2) Limit (mW / cm2 ) Result BLE 2±1 3 2.00 1.581 (1.99dBi) 0.00063 1 Pass

地址：深圳市南山区高新中一道 8 号万和医药园 1 楼 Address: 1st Floor, Wanhe Medical Park, No. 8, Gaoxin Middle Road, Nanshan District, Shenzhen 1 / 11 深圳有力科技有限公司 ShenZhenPowerfulTechnologyCO., Limited 規 格 承 認 書 SPECIFICATIONFOR APPROVAL 客户 CUSTOMER:欧创 客 户 料 号 CUSTOMERNO: 品名 PART NAME:WIFI天线：2.4G/5GWiFi天线/PCB 白色/3代端子0.81黑线L= 200 mm 供 方 料 号 SUPPLIERNO: YL1 476 -2.4/5G-WIF-V1 日期Date: 202 3.05 .25 客户确认CUSTOMERAPPROVEDBY APPROVALCHIEFSUPERVISOR 供方确认SUPPLIERSIGNATURE APPROVALCHECKDESIGN 赵旋旋陈娜张洋 地址：深圳市南山区高新中一道8号万和医药园1楼 深圳有力科技有限公司 ShenZhenPowerfulTechnologyCO.,Limited 2/11 实验室测试环境及设备 测试项目（TestProject）：S11、S12、VSWR、Efficiency、Gain3DRadiationPattern、TRP、TIS 地址：深圳市南山区高新中一道8号万和医药园1楼 深圳有力科技有限公司 ShenZhenPowerfulTechnologyCO.,Limited 3/11 規格承認書 ..................................................................................................................................................... 3 1. 工程图纸（ MechanicalDrawing ） ............................................................................................................ 4 2.技术指标（TechnicalIndex） .................................................................................................................... 5 3. 天线测试数据（ Antennatestdata ） ..................................................................................................... 6-10 4.天线包装（package） ............................................................................................................................... 11 地址：深圳市南山区高新中一道8号万和医药园1楼 深圳有力科技有限公司 ShenZhenPowerfulTechnologyCO.,Limited 4/11 1.工程图纸（MechanicalDrawing） 地址：深圳市南山区高新中一道8 号万和医药园1楼 深圳有力科技有限公司 ShenZhenPowerfulTechnologyCO., Limited 5 / 11 2. 技术指标（ TechnicalIndex ） 频率范围 FrequencyRange（MHz） 2400-2500Mhz 天线增益 antennagain 1.99dBi 驻波比 VSWR/500hms ≤2.0 输入阻抗 Impedance 50 Ω 接头 Termination 3代端子0.81黑线 L= 200mm 工作温度（°C） -30~+65 地址：深圳市南山区高新中一道8号万和医药园1楼 深圳有力科技有限公司 ShenZhenPowerfulTechnologyCO.,Limited 6/11 3.天线测试数据（ Antennatestdata ） 3-1无源参数(网分参数). SWR测试结果 LogMAG测试结果 地址：深圳市南山区高新中一道8号万和医药园1楼 深圳有力科技有限公司 ShenZhenPowerfulTechnologyCO.,Limited 7/11 3-2无源参数(效率/增益). PassiveTestFor2.4G FreqEffiGain (MHz)(%)(dBi) 240054.430.51 240554.340.68 241052.30.71 241551.740.87 242052.631.09 242551.511.13 243050.121.09 243552.781.4 244055.21.63 244556.361.73 245058.261.9 245559.211.92 246060.11.97 246558.781.83 247056.971.65 247557.181.67 248057.161.7 248557.741.75 249057.771.77 249558.871.93 250059.971.99 地址：深圳市南山区高新中一道8号万和医药园1楼 深圳有力科技有限公司 ShenZhenPowerfulTechnologyCO.,Limited 9/11 3-3天线方向图.

No.：BCTC/RF-EMC-005 Page: 1 of 57 Edition：B.0 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2306529284-1E Applicant: DREAM MACHINE TECHNOLOGY Product Name: DREAM MACHINE 1 Model/Type Ref.: DREAMACZ11 Tested Date: 2023-06-26 to 2023-07-05 Issued Date: 2023-07-05 Report No.: BCTC2306529284-1E No.：BCTC/RF-EMC-005 Page: 2 of 57 Edition：B.0 FCC ID: 2A7GZ-DREAMACZ11 The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: DREAM MACHINE 1 Trademark: Dream Machine Technology Model/Type Ref.: DREAMACZ11 Prepared For: DREAM MACHINE TECHNOLOGY Address: 27 rue de Fontarabie 75020 PARIS - FRANCE Manufacturer: EI Dongguan Limited Address: No.3 Fukang West Road, Honghualin Industrial Zone, Chongkoushequ, Houjie Dongguan, 523947 China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2023-06-26 Sample tested Date: 2023-06-26 to 2023-07-05 Issue Date: 2023-07-05 Report No.: BCTC2306529284-1E Test Standards: FCC Part15.247 ANSI C63.10-2013 Test Results: PASS Remark: This is Bluetooth BLE radio test report. Tested by: Approved by: Kelsey Tan/ Project Handler Zero Zhou/Reviewer Report No.: BCTC2306529284-1E No.：BCTC/RF-EMC-005 Page: 3 of 57 Edition：B.0 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Summary ....................................................................................................... 6 3. Measurement Uncertainty ..................................................................................... 7 4. Product Information And Test Setup ..................................................................... 8 4.1 Product Information ............................................................................................... 8 4.2 Test Setup Configuration ...................................................................................... 8 4.4 Channel List .......................................................................................................... 9 4.5 Test Mode ............................................................................................................. 9 4.6 Table Of Parameters Of Text Software Setting ................................................... 10 5. Test Facility And Test Instrument Used ............................................................... 11 5.1 Test Facility ......................................................................................................... 11 5.2 Test Instrument Used .......................................................................................... 11 6. Conducted Emissions .......................................................................................... 13 6.1 Block Diagram Of Test Setup .............................................................................. 13 6.2 Limit .................................................................................................................... 13 6.3 Test Procedure ................................................................................................... 13 6.4 EUT Operating Conditions .................................................................................. 13 6.5 Test Result .......................................................................................................... 14 7. Radiated Emissions ............................................................................................. 18 7.1 Block Diagram Of Test Setup .............................................................................. 18 7.2 Limit .................................................................................................................... 19 7.3 Test Procedure ................................................................................................... 20 7.4 EUT Operating Conditions .................................................................................. 21 7.5 Test Result .......................................................................................................... 21 8. Radiated Band Emission Measurement And Restricted Bands Of Operation ..... 28 8.1 Block Diagram Of Test Setup .............................................................................. 28 8.2 Limit .................................................................................................................... 28 8.3 Test Procedure ................................................................................................... 29 8.4 EUT operating Conditions ................................................................................... 29 8.5 Test Result .......................................................................................................... 30 9. Power Spectral Density Test ............................................................................... 31 9.1 Block Diagram Of Test Setup .............................................................................. 31 9.2 Limit .................................................................................................................... 31 9.3 Test Procedure ................................................................................................... 31 9.4 EUT Operating Conditions .................................................................................. 31 9.5 Test Result .......................................................................................................... 32 10. Bandwidth Test .......................…

Text truncated - open the document above for the full version.

Report No.: BCTC2306529284-1E No.：BCTC/RF-EMC-005 Page: 55 of 57 Edition：B.0 15. EUT Test Setup Photographs Conducted Emissions Photo Radiated Measurement Photos Report No.: BCTC2306529284-1E No.：BCTC/RF-EMC-005 Page: 56 of 57 Edition：B.0