2A7IGEXCBTSBMAX25W Cell Simulator

Covered Equipment Certification Attestation Letter February 19, 2024 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN: Reviewing Engineer FCC ID: 2A7IGEXCBTSBMAX. Applicant ́s FRN: 0032562118 EXFO Oy (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. EXFO Oy (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Germain Lamonde Title: President Company Name: EXFO Oy Date: February 19, 2024

U.S. Agent Designation for Service of Process - Certification Attestation Letter February 19, 2024 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN: Reviewing Engineer FCC ID: 2A7IGEXCBTSBMAX Applicant ́s FRN: 0032562118 Per section 2.911(d)(7) of the FCC rules, EXFO Oy (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process: Company Name: EXFO America inc. Physical U.S. Company Address: 3400 Waterview Pkwy #100, Richardson, TX 75080, United States Agent name: Tim Jennings Agent Email Address: [email protected] Agent FRN: 0033603440 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant): Signed: Signed: Printed name: Germain Lamonde Printed name: Tim Jennings Title: President Title: Sales Director Company Name: EXFO Oy Company Name: EXFO America INC Date: February 19, 2024 Date: February 19, 2024

Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent for FCC and ISED application On our behalf, I appoint Spencer Zhong of Nemko Canada, Inc. at 303 River Road, Ottawa, Ontario, Canada K1V 1H2, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC and in ISED Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with EXFO Oy, Elektroniikkatie 2A, FI-90590 Oulu, Finland. Dated: December 20, 2023 Agency agreement expiration date: 2024-12-18 Signed by: Germain Lamonde Signature Print name Executive Chairman Title +358 (0)403 010 300 Phone On behalf of: EXFO Oy Company name

2/19/2024 Nemko Canada Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 FCC ID: 2A7IGEXCBTSBMAX Model: FXm-Bmax Request for Permanent Confidentiality Pursuant to Sections 0.457(d) and 0.459 of the Commission’s rules, we hereby request that the following documents be held permanently confidential: • Schematics • Block diagrams • Bill of Materials/Parts Lists • Tune-up Info • Operational description • Internal photos • User manuals These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. All sales of the EXCBTSBMAX require a signed non-disclosure agreement from its purchaser and end user. Dated: 2/19/2024 Signed: Printed name: Germain Lamonde Title: Executive Chairman On behalf of: EXFO Oy

Mutual Confidentiality Agreement v. 2019-01 1 of 2 This confidentiality agreement (the “Agreement”) is entered into and is effective as of December 1, 2021(the “Effective Date”) between EXFO Inc. (“EXFO”), a Canadian corporation having its head office located at 400 Godin Avenue, Quebec, Quebec, Canada, G1M 2K2 on behalf of itself and its Affiliates, and [Company] (“Company”), having a place of business at Click or tap here to enter text.. 1. EXFO and Company intend to disclose and exchange certain information which is non-public, confidential and/or proprietary in nature to each other, namely but not limited to, information in order to establish and maintain a potential business relationship (the “Purpose”). All information (whether written, visual, oral or stored in any computer or any other electronic, magnetic or optical storage system) exchanged by the parties (whether before or after the Effective Date), together with all data, notes, analyses, compilations, forecasts, reports, studies, interpretations and other documents containing or based upon such information prepared by the parties is herein referred to collectively as the “Confidential Information”. 2. Each party may either be a party disclosing (a “Discloser”) or a party receiving (a “Recipient”) Confidential Information, or both. Affiliates of either party may also be considered as a Discloser or a Recipient under this Agreement, provided that each party shall be responsible for the use of the Confidential Information by their Affiliates. 3. For the purposes of this Agreement, “Affiliate” means any person, corporation, business or other legal entity that is directly or indirectly controlled by, in control of, or under common control with any party to this Agreement. For purposes of this definition of “Affiliate,” the term “control” means legal power to direct or cause the direction of management and policies of a legal entity, or possession of more than fifty percent (50%) of the voting securities (whether directly or pursuant to any option or other similar arrangement) or the power to elect more than fifty percent (50%) of such other corporation’s business or other legal entity’s board of directors or other managing authority, or other comparable equity. 4. Each party shall only furnish Confidential Information to those of its legal, financial or technical advisors, its employees and the employees of its Affiliates (collectively, “Advisors and Affiliates”) who need to know the Confidential Information for the Purpose and who agree to receive the Confidential Information under terms at least as restrictive as those specified in this Agreement, provided that each party shall be responsible for the use of the Confidential Information by their Advisors and Affiliates. 5. The Recipient and its Advisors and Affiliates shall keep the Confidential Information confidential and shall not, without the Discloser’s prior written consent, in any manner whatsoever, in whole or in part, disclose the Confidential Information, nor use the Confidential Information other than for the Purpose. The Recipient shall not reverse-engineer or remanufacture the Confidential Information. In addition, the Recipient shall not copy, reproduce or in any way duplicate the Confidential Information, except as may be required for the use of its Advisors and Affiliates for the Purpose. Without the prior written consent of the other party, except as required by law, neither party, nor its Advisors and Affiliates, will disclose to any person the fact that the Confidential Information has been made available, or that discussions or negotiations are taking place or have taken place concerning the Purpose. 6. The term “Confidential Information” shall not include such portions of the Confidential Information which (a) are rightfully in a Recipient’s possession before receipt from the Discloser; (b) are or become a matter of public knowledge other than as a result of disclosure by a Recipient; (c) are rightfully received by a Recipient from a third party who has no duty of confidentiality; or (d) are independently developed by a Recipient without use of the Discloser’s Confidential Information. 7. All copies of the Confidential Information, except for that portion which consists of data, notes, analyses, compilations, forecasts, studies, interpretations or other documents prepared by the Recipient and its Advisors and Affiliates (collectively, “Work Product”), will be returned to the Discloser immediately at the Discloser’s written request. That portion of the Confidential Information which consists of Work Product will be destroyed upon the written request of the Discloser and, if requested by the Discloser, the Recipient shall provide a certificate testifying to the complete return and destruction of all Confidential Information in accordance herewith.The obligation to erase as specified herein shall not apply to Confidential Information retained as part of computer backup procedures, provided that any such retained Confidential Information remains subject to a duty of confidentiality. 8. The disclosure of the Confidential Information to a Recipient does not confer on the Recipient any license, interest or rights of any kind in the Confidential Information. 9. If either party, or its Advisors and Affiliates, become legally compelled to disclose any of the Confidential Information, such party will provide the other party with prompt notice in order that it may seek a protective order or other appropriate remedy or waive compliance with the provisions of this Agreement. In the event that such protective order or other remedy is not obtained, or that compliance herewith is waived, only that portion of the Confidential Information that is legally required (as determined by written opinion of counsel addressed to both parties) will be furnished and the party compelled to disclose shall exercise its best efforts to obtain reliable assurance that confidential treatment wi…

Text truncated - open the document above for the full version.

February 19, 2024 Nemko Canada, Inc. 303 River Road, Ottawa, ON, K1V 1H2 Justification letter regarding the frequency bands under FCC Part 22H and 24E FCC ID: 2A7IGEXCBTSBMAX For Models: FXm-Bmax This letter is to confirm that the above-mentioned product respects the following licensed frequency blocks related to FCC part 22H as specified in 22.905 Channels for cellular service and FCC part 2 4E as specified in 24.229 Frequencies. The system will transmit only on same frequencies as the licensed operators are transmitting already in the system is used. Sincerely, Juha Kumpula Product Manager EXFO Signature:

Appendix: Photo of DUT Overall-view Size: W X D X H = 434mm X 671mm X 280mm PHOTO ALL VIEW Model: FXm‐Bmax Front view Side view Left PHOTO ALL VIEW Model: FXm‐Bmax Side view Right Top view PHOTO ALL VIEW Model: FXm‐Bmax Back view PHOTO ALL VIEW Model: FXm‐Bmax Bottom view PHOTO ALL VIEW Model: FXm‐Bmax

Back view PHOTO ALL VIEW Model: FXm‐Bmax

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) FCC and RSS-102 Annex C – MPE Calculation; Date: August 2023 C h o o s e S c a n d i n a v i a n t r u s t RADIO TEST REPORT Report ID Project ID REP040788 PRJ0042471 Type of assessment: MPE Calculation report Manufacturer: Hardware Version Identification Number (HVIN): EXFO Oy FXm-Bmax Product Marketing Name (PMN): Transportable Base Station System FCC identifier: ISED certification number: FCC ID: 2A7IGEXCBTSBMAX IC: 28799-EXCBTSBMAX Specification:  FCC 47 CFR Part 1 Subpart I, §§1.1307, 1.1310  FCC 47 CFR Part 2 Subpart J, §2.1091  FCC KDB 447498 D01 General RF Exposure Guidance v06  ISED Canada RSS-102 Issue 5 Amendment 1, (February 2021) RSS-102 Annex B - Declaration of RF Exposure Compliance ATTESTATION: I attest that the information provided in Annex A is correct; that the Technical Brief was prepared and the information contained therein is correct; that the device evaluation was performed or supervised by me; that applicable measurement methods and evaluation methodologies have been followed; and that the device meets the SAR and/or RF field strength limits of RSS-102. Date of issue: May 28, 2024 Tarek Elkholy, EMC/RF Specialist Prepared by Signature Section 1 MPE calculation Report reference ID: REP040788 Page 2 of 8 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 Montréal site: 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Test site identifier Organization Ottawa Montreal Cambridge FCC: CA2040 CA2041 CA0101 ISED: 2040A-4 2040G-5 24676 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Section 1 MPE calculation Report reference ID: REP040788 Page 3 of 8 Evaluation summary 1.1 MPE calculation for standalone transmission 1.1.1 References, definitions and limits FCC §2.1091(d) (2) (2) For operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in Table 1 in paragraph (e)(1) of this section, may be used instead of whole-body SAR limits as set forth in paragraphs (a) through (c) of this section to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b) of this part, except for portable devices as defined in §2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in §2.1093. Table 1.1-1: Table 1 to §1.1310(e)(1) — Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3–3.0 614 1.63 *(100) ≤6 3.0–30 1842 / f 4.89 / f *(900 / f 2 ) <6 30–300 61.4 0.163 1.0 <6 300–1500 f / 300 <6 1500–100000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) <30 1.34–30 824 / f 2.19 / f *(180 / f 2 ) <30 30–300 27.5 0.073 0.2 <30 300–1500 f / 1500 <30 1500–100000 1.0 <30 Notes: f = frequency in MHz. * = Plane-wave equivalent power density. RSS-102, Section 4 For the purpose of this standard, Industry Canada has adopted the SAR and RF field strength limits established in Health Canada’s RF exposure guideline, Safety Code 6: Table 1.1-2: Table 4 to RSS-102 — RF Field Strength Limits Frequency range (MHz) Electric field strength (V/m rms) Magnetic field strength (A/m rms) Power density (W/m 2 ) Reference Period (minutes) Limits for Controlled Environment 10–20 61.4 0.163 10 6 20–48 129.8 / ƒ 0.25 0.3444 / ƒ 0.25 44.72 / ƒ 0.5 6 48–100 49.33 0.1309 6.455 6 100–6000 15.60 ƒ 0.25 0.04138 ƒ 0.25 0.6455 ƒ 0.5 6 6000–15000 137 0.364 50 6 Limits for Uncontrolled Environment 10–20 27.46 0.0728 2 6 20–48 58.07 / ƒ 0.25 0.1540 / ƒ 0.25 8.944 / ƒ 0.5 6 48–300 22.06 0.05852 1.291 6 300–6000 3.142 ƒ 0.3417 0.008335 ƒ 0.3417 0.02619 ƒ 0.6834 6 6000–15000 61.4 0.163 10 6 Notes: ƒ = frequency in MHz Section 1 MPE calculation Report reference ID: REP040788 Page 4 of 8 References, definitions and limits, continued Equation from page 18 of OET Bulletin 65, Edition 97-01 푆= 푃퐺 4휋푅 2 where: S = power density (mW/cm 2 or W/m 2 ) P = power input to the antenna (mW or W) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (cm or m) Notes - All the calculation in this report is based on test data captured in test reports REP019861 (Cellular FCC-ISED) and REP020724 (Cellular FCC-ISED). Section 1 MPE calculation Report reference ID: REP040788 Page 5 of 8 1.1.2 EUT…

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) EN/CISPR/AS/NZS 32-FCC-ICES-EN6100032-EN6100033.docx; Date: October 18, 2023 C h o o s e S c a n d i n a v i a n t r u s t RADIO TEST REPORT Report ID Project ID REP019861 PRJ0042471 . Type of assessment: Final product testing Applicant: Product: EXFO Oy Transportable Base Station System Model: FXm-Bmax FCC ID: IC Registration number: 2A7IGEXCBTSBMAX 28799-EXCBTSBMAX Specifications:  FCC 47 CFR Part 22, Subpart H  FCC 47 CFR Part 24, Subpart E  FCC 47 CFR Part 27, Subpart C  FCC 47 CFR Part 90, Subpart S  ISED RSS -119 Issue 12  ISED RSS -130 Issue 2  ISED RSS -132 Issue 4  ISED RSS -133 Issue 6  ISED RSS -139 Issue 4  ISED RSS -199 Issue 4 Date of issue: April 3, 2024 Tarek Elkholy, EMC/RF Specialist Tested by Signature Ketav Jani, EMC/RF Specialist Tested by Signature Fahar A Sukkoor, EMC/RF Specialist Reviewed by Signature Report reference ID: REP019861 Page 2 of 133 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 Montréal site: 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Test site registration Organization Recognition numbers and location FCC/ISED FCC: CA2040; IC: 2040A-4 (Ottawa/Almonte); FCC: CA2041; IC: 2040G-5 (Montreal); CA0101 (Cambridge) Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: REP019861 Page 3 of 133 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Report summary ................................................................................................................................................................................. 4 1.1 Test specifications .................................................................................................................................................................................................... 4 1.2 Test methods ............................................................................................................................................................................................................ 4 1.3 Exclusions ................................................................................................................................................................................................................. 4 1.4 Statement of compliance .......................................................................................................................................................................................... 4 1.5 Test report revision history ....................................................................................................................................................................................... 4 Engineering considerations ................................................................................................................................................................. 5 2.1 Modifications incorporated in the EUT for compliance ............................................................................................................................................ 5 2.2 Technical judgment .................................................................................................................................................................................................. 5 2.3 Deviations from laboratory tests procedures ........................................................................................................................................................... 5 Test conditions ................................................................................................................................................................................... 6 3.1 Atmospheric conditions ............................................................................................................................................................................................ 6 3.2 Power supply range .................................................................................................................................................................................................. 6 Information provided by the applicant ................................................................................................................................................ 7 4.1 Disclaimer .....................…

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) EN/CISPR/AS/NZS 32-FCC-ICES-EN6100032-EN6100033.docx; Date: October 18, 2023 C h o o s e S c a n d i n a v i a n t r u s t RADIO TEST REPORT Report ID Project ID REP020724 PRJ0042470 . Type of assessment: Final product testing Applicant: Product: EXFO Oy Transportable Base Station System Model: FXm-Bmax FCC ID: IC Registration number: 2A7IGEXCBTSBMAX 28799-EXCBTSBMAX Specifications:  FCC 47 CFR Part 22, Subpart H  FCC 47 CFR Part 24, Subpart E  FCC 47 CFR Part 27, Subpart C  ISED RSS -130 Issue 2  ISED RSS -132 Issue 4  ISED RSS -133 Issue 6  ISED RSS -139 Issue 4  ISED RSS -192 Issue 5  ISED RSS -198 Issue 1  ISED RSS -199 Issue 4 Date of issue: April 25, 2024 Tarek Elkholy, EMC/RF Specialist Tested by Signature Ketav Jani, EMC/RF Specialist Tested by Signature Fahar Abdul Sukkoor, EMC/RF Specialist Reviewed by Signature Report reference ID: REP020724 Page 2 of 81 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 Montréal site: 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Test site registration Organization Recognition numbers and location FCC/ISED FCC: CA2040; IC: 2040A-4 (Ottawa); FCC: CA2041; IC: 2040G-5 (Montreal); CA0101 (Cambridge) Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: REP020724 Page 3 of 81 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Report summary ................................................................................................................................................................................. 4 1.1 Test specifications .................................................................................................................................................................................................... 4 1.2 Test methods ............................................................................................................................................................................................................ 4 1.3 Exclusions ................................................................................................................................................................................................................. 4 1.4 Statement of compliance .......................................................................................................................................................................................... 4 1.5 Test report revision history ....................................................................................................................................................................................... 4 Engineering considerations ................................................................................................................................................................. 5 2.1 Modifications incorporated in the EUT for compliance ............................................................................................................................................ 5 2.2 Technical judgment .................................................................................................................................................................................................. 5 2.3 Deviations from laboratory tests procedures ........................................................................................................................................................... 5 Test conditions ................................................................................................................................................................................... 6 3.1 Atmospheric conditions ............................................................................................................................................................................................ 6 3.2 Power supply range .................................................................................................................................................................................................. 6 Information provided by the applicant ................................................................................................................................................ 7 4.1 Disclaimer ...................................…

Text truncated - open the document above for the full version.

Section 7 Testing data Test name Maximum output power at RF…

Text truncated - open the document above for the full version.