2A7Q3-IQIG03iQi Low voltage Relay (Zigbee)

FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna. ‐‐ Increase the separation between the equipment and receiver. ‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐ Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Statement To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Co m Ad d Pr o Mo d Pr o We act We an d issu our Sig Na m Title Com mpany: DO dress: 190, oduct Name del Numbe oduct Desc authorize M on our beha declare tha d certificatio ues concern behalf shal nature: me: e: mpany: OKAT, Inc. Independen e: iQi Low vo er(s): iQiG03 ription: iQi MiCOM Lab alf on all ma at MiCOM L n of equipm ning the app ll have the s David Liu Purchase M DOKAT, In Agen ce Ln, Unit, oltage Relay 3 Low voltag e bs Inc., 575 atters conce Labs Inc. is ment to the r proval applic same effect Manager nc. DOKAT nt Auth 270, Maitlan (Zigbee) e Relay (Zigb Boulder Co erning the c allowed to f regulatory a cation. Any t as acts of T, Inc. horizat nd, Florida, 3 bee) ourt, Pleasa certification forward all i agencies as and all acts our own. tion 2751 USA anton, Califo of above na information s required a s carried ou Date: ornia 94566 amed equip related to t nd to discu ut by MiCOM Jun. 30, 20 6, USA, to pment. the approva ss any M Labs on 22 al

Office o Federa 7435 O Columb USA Subjec t FCC ID To Wh o Pursua are req u docume These d propriet might b It is ou r corresp docume authoriz Sincer e Signat u Name: Title: Pu of Engineeri l Communic Oakland Mills bia, MD 210 t; Request f D: 2A7Q3-IQ om It May C nt to the pro uesting the ents from pu documents tary informa be harmful to Schema Block D Parts Lis Operatio r understand pondence du ents and thi zation is iss ely, ure: David Liu urchase Ma ing Techno cations Com s Road 046 for Confiden QIG03 Concern, ovisions of t Commissio ublic disclos contain det ation in ope o our comp atic Diagram iagram st onal Descri ding that all uring the ce s informatio sued. anager logy mmission ntiality the Commis on to withho sure indefin tailed syste ration of th e any and wo m ption l measurem ertification re on will be av DOKAT, I ssion’s rule old the follow nitely. m and equi e equipmen ould give co ment test rep eview proce vailable for nc. s Title 47 S wing attach pment desc nt. The publ ompetitors a ports, FCC ess cannot public revi e Sections §0. hment(s) as criptions an ic disclosu r an unfair ad ID label for be granted ew once the Date: Jun. 457 and §0 confidentia d are consi re of these d vantage in mat and as confide n e grant of eq 30, 2022 0.459, we al dered as documents the market . ntial quipment .

Annex A External Photos Report No.:HK2205232148-E Page 1 of 4 Report No.:HK2205232148-E Page 2 of 4 Report No.:HK2205232148-E Page 3 of 4 Report No.:HK2205232148-E Page 4 of 4

FCC ID LABEL: Ca. 5mm x 10mm Label Location FCC ID: 2A7Q3-IQIG03

Annex B Internal Photo Report No.:HK2205232148-E Page 1 of 4 Report No.:HK2205232148-E Page 2 of 4 Report No.:HK2205232148-E Page 3 of 4 Antenna Report No.:HK2205232148-E Page 4 of 4

MPE ESTIMATION FCC ID: 2A7Q3-IQIG03 1,Limit for General Population/ Uncontrolled Exposures Frequency Power density (mW/ cm 2 ) Averaging time(minutes) 300MHz----1.5GHz F/1500 30 1.5GHz---100GHz 1.0 30 Note: F= Frequency in MHz 2, Estimation Result Mode Max PK Output power(dBm) Tune Up Power(dBm) Max Tune Up power(mW) Antenna Gain(dBi) Antenna Gain (numerical) MPE ( mW/cm²) Zigbee -3.03 -3±1(-2) 0.63 0 1 0.00013 Note: Note: The estimation distance is 20cm Note: PK Output power= conducted power. Conducted power see the test report HK2205232148-E, antenna gain=0dBi when the minimum test separation distance is >20 cm, a distance of 20 cm is applied to determine RF Exposure test exclusion. The test exclusion threshold is 0.00013 mW/cm² which is< 1.0mW/cm², RF Exposure testing is not required. -------The End-------

Page 1 of 41 Report No.: HK2205232148-E TEST REPORT FCC PART 15 SUBPART C 15.247 Test report On Behalf of DOKAT, Inc. For iQi Low voltage Relay (Zigbee) Model No.: iQiG03 FCC ID: 2A7Q3-IQIG03 Prepared For : DOKAT, Inc. 190, Independence Ln, Unit, 270, Maitland, Florida, 32751 USA Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: May. 23, 2022 ~Jun. 21, 2022 Date of Report: Jun. 21, 2022 Report Number: HK2205232148-E Page 2 of 41 Report No.: HK2205232148-E TEST RESULT CERTIFICATION Applicant’s name ................... : DOKAT, Inc. Address .................................... : 190, Independence Ln, Unit, 270, Maitland, Florida, 32751 USA Manufacture's Name .............. : DOKAT, Inc. Address .................................... : 190, Independence Ln, Unit, 270, Maitland, Florida, 32751 USA Product description Trade Mark: N/A Product name ............................. : iQi Low voltage Relay (Zigbee) Model and/or type reference .. : iQiG03 Standards ................................ : 47 CFR FCC Part 15 Subpart C 15.247 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test .............................................. : Date (s) of performance of tests ................ : May. 23, 2022 ~Jun. 21, 2022 Date of Issue ............................................. : Jun. 21, 2022 Test Result ................................................. : Pass Prepared by: Project Engineer Reviewed by: Project Supervisor Approved by: Technical Director Page 3 of 41 Report No.: HK2205232148-E Contents Page 1 TEST SUMMARY ............................................................................................................................................ 6 1.1 TEST DESCRIPTION ................................................................................................................................ 6 1.2 MEASUREMENT UNCERTAINTY ............................................................................................................ 7 1.3 INFORMATION OF THE TEST LABORATORY ....................................................................................... 7 2 GENERAL INFORMATION ............................................................................................................................. 8 2.1 GENERAL DESCRIPTION OF EUT .......................................................................................................... 8 2.2 DESCRIPTION OF TEST CONDITIONS ................................................................................................... 9 2.3 DESCRIPTION OF TEST SETUP ........................................................................................................... 10 3 EQUIPMENTS LIST FOR ALL TEST ITEMS ............................................................................................... 11 4 TEST RESULT .............................................................................................................................................. 13 4.1 ANTENNA REQUIREMENT .................................................................................................................... 13 4.1.1 Standard requirement ...................................................................................................................... 13 4.1.2 EUT Antenna ................................................................................................................................... 13 4.2 CONDUCTION EMISSIONS MEASUREMENT ...................................................................................... 14 4.2.1 Applied procedures / Limit ............................................................................................................... 14 4.2.2 Test procedure ................................................................................................................................. 14 4.2.3 Test setup ........................................................................................................................................ 15 4.2.4 Test results ...................................................................................................................................... 16 4.3 RADIATED EMISSIONS MEASUREMENT............................................................................................. 17 4.3.1 Applied procedures / Limit ............................................................................................................... 17 4.3.2 Test setup ........................................................................................................................................ 17 4.3.3 Test Result ....................................................................................................................................... 19 4.4 MAXIMUM OUTPUT POWER MEASUREMENT .................................................................................... 26 4.4.1 Limit ................................................................................................................................................. 26 4.4.2 Test procedure ................................................................................................................................. 26 4.4.3 Deviation from standard ................................................................................................................... 26 4.4.4 Test setup ..............................................................................................................................…

Text truncated - open the document above for the full version.

Radiated Emission