2A7TQRA0001A-Label/0001

Reelables User Manual for A-Label/0001 Use with barcode printers: Step 1. Download Reelables Desktop app and ensure software connects to thermal barcode printer with barcode scanner. Step 2. Load Reelables A-Labels into thermal barcode printer. Step 3. Scan a barcode, QR code or other serialisation already printed on an inventory item. A Reelables A-Label is instantly printed with the same serialisation. Step 4. Peel label backing and stick Reelables A-Label to box. Use with Android or iPhone: Step 1. Download Reelables App for Android or iPhone. Step 2. Scan NFC with iPhone or Android. Step 3. Peel label backing and stick Reelables A-Label to box. Per FCC 15.19(a)(3) and (a)(4) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Per FCC 15.21, The user manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment." Per FCC KDB 784748, Section A.8.: To satisfy RF exposure requirements, this device and its antenna must operate with a separation distance of at least 20cm from all persons.

Reelables FCC Cover Letter Date: June 30, 2022 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Dear Madam or Sir. Re: Application Cover Letter We, Reelables Inc., hereby apply for original grant certification of our product A-Label/0001; FCC ID: 2A7TQRA0001 under FCC Part 15.249. The model A-Label/0001 is a one-time use, disposable label that supports Bluetooth 5.0 beacons. The function of the device is to signal presence to listening Bluetooth receivers such as smart phones or dedicated gateway devices for tracking inventory and shipments. The model A-Label/0001 was tested in full to the requirement aforementioned rules and was found to be in compliance. Sincerely, Brian Krejcarek CEO, Reelables Inc.

Date: June 30, 2022 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 RE: Submission of FCC ID: 2A7TQRA0001 Dear Madam or Sir. Pursuant to the provisions of the Commission’s rules Title 47 CFR Sections §0.457(d) and §0.459, we are requesting the Commission to withhold some confidential documents from public disclosure. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Therefore, long term confidentiality is requested for the following attachments; Internal Photos (This is because we use a proprietary manufacturing process for mounting components, including the Bluetooth chip to a plastic substrate, of which is subsequently laminated with epoxy adhesive into a polyurethane foam, forming a non-openable lamination stack inaccessible to end users) In addition; Schematic Diagram Block Diagram Parts List Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachments; External Photos Test Setup Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Brian Krejcarek CEO, Reelables, Inc. Reelables FCC Request for Confidentiality

Reelables A-Label External Photos BOTTOM VIEW (with removable backing liner) TOP VIEW BOTTOM VIEW (without backing liner)

Reelables Label and Location (FCC ID) FCC ID: 2A7TQRA0001 The FCC ID identifier is directly printed with permanent ink via ink jet, dot matrix, laser scribed, or flexgraphic transfer, onto the surface of the Reelables A-Label top surface or backing material.

Reelables Antenna Info Title: A Label/0001: Antenna technical summary Radiated power and compliance with CFR Scope This report provides details of the antenna on Reelables A-Label/0001 product and the maximum field strength that can be generated at a reference distance of 3 m. 1 Description of device and antenna The device is in the form of aluminium conductors on PET film. A large groundplane area underlies the battery, and a smaller groundplane underlie the electronic components and forms the groundplane against which an antenna, in the form of a meandered quarter-wave monopole, is excited. The antenna is connected to the BLE SOC via a low pass filter formed using etched inductive and capacitive elements in a Pi format. The overall length of the device is 75 mm, including the NFC antenna, which is unlikely to contribute to radiation of the 2.4-GHz signal. The main groundplane is 62 mm long (0.51 wavelengths at 2.45 GHz). The arrangement provides a dipole-like radiation pattern with its minima aligned with the long axis of the groundplane. The maximum gain of the antenna is that of a dipole (2.6 dBi) although its efficiency is unlikely to exceed 50%, which is typical for this class of antennas. Since the antenna is formed on the PET film substrate, no other antenna can be used with the device, in so ensuring compliance with FCC 15.203. 2 Field strength at 3 m The measured field strength at a distance of 3 m was 95.2 dB(μV/m) = 0.06 V/m. The output power from the modem = 2.5 dBm = 1.8 mW. If 1.8 mW is fed to an antenna with a gain of 0 dBi, the resulting power density at 3 m = 1.8/(4π x 3 2 ) = 0.078 V/m. The measured field strength was 0.06 V/m, so the effective gain of the antenna was 0.06/0.078 = 0.77 = -2.3 dBi. 3 Additional note Also note that the NFC coil also present in the device and mentioned above is a passive device configured to resonate at 13.56MHz and positioned far away from the 2.4GHz Bluetooth antenna. Therefore it is highly unlikely to contribute to any radiation of the BLE radio.

This report must not be used to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. EAR-Controlled Data - This document contains technical data whose export and reexport/retransfer is subject to control by the U.S. Department of Commerce under the Export Administration Act and the Export Administration Regulations. The Department of Commerce’s prior written approval may be required for the export or re- export/retransfer of such technical data to any foreign person, foreign entity or foreign organization whether in the United States or abroad. Reelables Inc. A-Label/0001 FCC 1.1307:2022 Bluetooth Low Energy Radio Report: RENC0001.5, Issue Date: July 25, 2022 CERTIFICATE OF EVALUATION 2018-09-14 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing Last Date of Evaluation: July 21, 2022 Reelables Inc. EUT: A-Label/0001 RF Exposure Evaluation Standards Specification Method FCC 1.1307:2022 FCC 1.1307:2022 Results Method Clause Description Applied Results Comments (b)(3)(i)(B) Exemption From RF Exposure Evaluation Yes Pass None Deviations From Evaluation Standards None Approved By: Donald Facteau, Process Architect Report No. RENC0001.5EAR-Controlled Data2/11 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 00 None Report No. RENC0001.5EAR-Controlled Data3/11 ACCREDITATIONS AND AUTHORIZATIONS 2021.09.01 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Each laboratory is accredited by A2LA to ISO / IEC 17025, and as a product certifier to ISO / IEC 17065 which allows Element to certify transmitters to FCC and IC specifications. Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Recognized as an EU Notified Body validated for the EMCD and RED Directives. United Kingdom BEIS – Recognized by the UK as an Approved Body under the UK Radio Equipment and UK EMC Regulations. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: California Minnesota Oregon Texas Washington Report No. RENC0001.5EAR-Controlled Data4/11 FACILITIES 2020.12.15 California Labs OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-11 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 Oregon Labs EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 98011 (425)984-6600 A2LA Lab Code: 3310.04 Lab Code: 3310.05 Lab Code: 3310.02 Lab Code: 3310.03 Lab Code: 3310.06 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834E-1, 2834E-3 2834D-1 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 A-0108 A-0201 A-0110 Recognized Phase I CAB for ISED, ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 US0017 US0191 US0157 Report No. RENC0001.5EAR-Controlled Data5/11 PRODUCT DESCRIPTION 2018-07-17 Client and Equipment Under Evaluation Information Company Name: Reelables Inc. Address: 113 Cherry St 76660 City, State, Zip: Seattle, Washington 98104-2205 USA Evaluation Requested By: Brian Krejcarek EUT: A-Label/0001 Date of Evaluation: 7/21/2022 Information Provided by the Party Requesting the Evaluation Functional Description of the Equipment: The A-Label from Reelables is an active Bluetooth (BTLE) beaconing device manufactured on a thin film substrate with an overall thickness less than 0.8mm. The label measures 100mm along its longest direction and is printable as label media in thermal barcode printers. The active radio device mounted to the label substrate is a commercially available Bluetooth LE radio chip configured in firmware to transmit with a power level of 0dBm. Combined with a trace antenna formed on the same substrate, the total EIRP is less than 1mW. The device is intended for inventory management and other controlled asset tracking appl…

Text truncated - open the document above for the full version.

This report must not be used to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. EAR-Controlled Data - This document contains technical data whose export and reexport/retransfer is subject to control by the U.S. Department of Commerce under the Export Administration Act and the Export Administration Regulations. The Department of Commerce’s prior written approval may be required for the export or re- export/retransfer of such technical data to any foreign person, foreign entity or foreign organization whether in the United States or abroad. Reelables Inc. A-Label/0001 FCC 15.249:2022 Bluetooth Radio Report: RENC0001, Issue Date: August 1, 2022 CERTIFICATE OF TEST 2022.04.01 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing. Last Date of Test: July 1, 2022 Reelables Inc. EUT: A-Label/0001 Radio Equipment Testing Standards Specification Method FCC 15.249:2022 ANSI C63.10:2013 Results Test Description Result Specification Section(s) Method Section(s) Comments Duty Cycle Pass N/A 7.5 Emissions Bandwidth (20 dB) Pass 15.215(c) 6.9.3 Field Strength of Fundamental Pass 15.249(a),(c-e) 6.6 Field Strength of Harmonics and Spurious Radiated Emissions Pass 15.249(a), (c-e) 6.5, 6.6 Powerline Conducted Emissions N/A 15.207 6.2 Not required for a battery powered EUT. Powerline Conducted Emissions (Receiver) N/A 15.107 ANSI C63.4 - 12.2.4 Not required for a battery powered device. Radiated Emissions for Receiver N/A FCC 15.101, 15.109 ANSI C63.4 - 12.2.5 Not required. Deviations From Test Standards None Approved By: Cole Ghizzone, Department Manager Report No. RENC0001.02/38 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 00 None Report No. RENC0001.03/38 ACCREDITATIONS AND AUTHORIZATIONS 2021.09.01 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Each laboratory is accredited by A2LA to ISO / IEC 17025, and as a product certifier to ISO / IEC 17065 which allows Element to certify transmitters to FCC and IC specifications. Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Recognized as an EU Notified Body validated for the EMCD and RED Directives. United Kingdom BEIS – Recognized by the UK as an Approved Body under the UK Radio Equipment and UK EMC Regulations. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: California Minnesota Oregon Texas Washington Report No. RENC0001.04/38 FACILITIES 2020.12.15 California Labs OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-11 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 Oregon Labs EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 98011 (425)984-6600 A2LA Lab Code: 3310.04 Lab Code: 3310.05 Lab Code: 3310.02 Lab Code: 3310.03 Lab Code: 3310.06 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834E-1, 2834E-3 2834D-1 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 A-0108 A-0201 A-0110 Recognized Phase I CAB for ISED, ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 US0017 US0191 US0157 Report No. RENC0001.05/38 MEASUREMENT UNCERTAINTY TMU.2015.07.10 Measurement Uncertainty When a measurement is made, the result will be different from the true or theoretically correct value. The difference is the result of tolerances in the measurement system that cannot be completely eliminated. To the extent that technology allows us, it has been our aim to minimize this error. Measurement uncertainty is a statistical expression of measurement error qualified by a probability distribution. A measurement uncertainty estimation has been performed for each test per our internal quality document QM205.4.6. The estimation is used to compare the measured resu…

Text truncated - open the document above for the full version.

XMit 2022.02.07.0 DutyCycle (1).JPG DutyCycle (2).JPG DUTY CYCLE XMit 2022.02.07.0 SE (1).JPG SE (2).JPG EMISSIONS BANDWIDTH (20 dB) Report No. RENC00012/7 FIELD STRENGTH OF FUNDAMENTAL WTD.2022.02.22.0 EmiR5 2022.03.10.0 PSA-ESCI 2022.1.12.0 EUT Horz Report No. RENC00013/7 FIELD STRENGTH OF FUNDAMENTAL WTD.2022.02.22.0 EmiR5 2022.03.10.0 PSA-ESCI 2022.1.12.0 EUT on Side EUT Vert Report No. RENC00014/7 FIELD STRENGTH OF HARMONICS AND SPURIOUS RADIATED EMISSIONS WTD.2022.02.22.0 EmiR5 2022.03.10.0 PSA-ESCI 2022.1.12.0 Report No. RENC00015/7 FIELD STRENGTH OF HARMONICS AND SPURIOUS RADIATED EMISSIONS WTD.2022.02.22.0 EmiR5 2022.03.10.0 PSA-ESCI 2022.1.12.0 Report No. RENC00016/7 FIELD STRENGTH OF HARMONICS AND SPURIOUS RADIATED EMISSIONS WTD.2022.02.22.0 EmiR5 2022.03.10.0 PSA-ESCI 2022.1.12.0 Report No. RENC00017/7