2A82Y-TRL1M0A1NETRL1 Safety interlock

TRL1
safety interlocking
device
series Functional
features








TRL1
safety
interlocking
device
series
is
based
on
RFID
radio
frequency
induction
coding
technology,
using
monitored
stainless
steel
latch
mechanism,
used
for
personnel
or
machine
safety
protective
door
device.
The
secure
dual-channel
output
technology
can
achieve
safety
level
SIL3
or
PLe,
which
can
be
used
with
the
safety
latch. Technical
parameter ※The
maximum
power
is
10W
(no
load)
and
the
duration
is
200ms



Safety
level 2-way
redundant
PNP
or
NPN
output
(with
self- diagnostic
test
pulses) Safety
output Latch
insertion
deviation Locking
retainer
Fmax
(ISO14119) Locking
retainer
Fzh
(ISO14119) Minimum
radius
of
the
revolving
door Working
voltage Rated
power Output
current Output
conduction
voltage
drop Leakage
current Operating
frequency Response
time Risk
time Start
time Protection
grade Operating
temperature Relative
humidity Material IS0
13849-1

IEC/EN60947-5-3 Cat.
4
/SIL3
dual
channel
interlock
conforming
to
IS013849-1
is
suitable
for
PLe/PLd. Standard Safety Classification Output Protect Overheat
protection
stops
and
restarts Reverse
polarity
protection Transient
noise
protection Failure
pulse
protection Technical
parameters Safety
short
circuit
protection Current
limit Overload
protection Over
voltage
protection CE

/
CQC
/
FCC Certification 1
PNP
or
NPN
output
(door
opening
and
closing/lock
locking/auxiliary
output/fault
indicator). PFHd MTTFd Max.：±2mm 9750N
or
3000N 7500N
or
2000N ≥220mm DC
24V±15% 4.6W(No
load)※ Max.：200mA ＜2.5V@200mA ＜100uA 0.5Hz 100ms(Working
independently) 100ms 3.5s Ip67 0...+55°C 5...95% Nylon/zinc
alloy/stainless
steel 288年 <4.2x10 -8 Aux
output SHENZHEN
TONGCHUANG
MECHANTRONICS
CO.,LTD. Model
description TRL1
safety
interlocking
device
series
selection
Guide ※Optional:
Optional
items,
"※"
means
the
"1"
to
the
left
of
※
is
variable. Lock
holding
force
Fzh
complies
with
ISO14119
test
standards MADE
IN
CHINAMADE
IN
CHINA TRL

























































Guard
lock switch 0：E
lectromagnetic
locking 1：Mechanical
locking M：Universal






coding
type U：Unique






coding
type 1：Output
monitored






by
door
lock 3：Output
monitored






by
actuator Interface
mode A：Air
plug
(default) L：Direct
line Locking
force (ISO14119) None：Fzh=7500N E：Fzh=2000N A 1 1 AC：Actuator SE：Sensors None:
complete
sets of
products − output mode P：PNP
output N：NPN
output Optional
features,

"※"
means
the
"1"
to
the
left
of
※
is
variable. 0：
The
cascaded
input
gate
is
close
(positive) 1：Cascading
input
lock
fixed
(positive)
(default) 2：Cascaded
input
auxiliary
output
(reverse) 3：
Indicates
the
cascading
input
status
(positive) 4：
No
cascaded
input
gate
close
(positive) 5：
No
cascade
input
door
lock
fixed
(positive) 6：
No
cascaded
input
auxiliary
output
(positive) 7：
Cascaded
input
system
fault
indication
(positive) 8：


No
cascaded
input
system
fault
indication
(positive) 9：Cascade
input
gate
close
(reverse) A：Cascade
input
lock
lock
(reverse) B：Cascaded
input
auxiliary
output
(positive) C：
Cascaded
input
status
(reverse) D：
uncascaded
input
gate
approach
(reverse) E：
Uncascaded
input
door
lock
(reverse) F：
Uncascaded
input
auxiliary
output
(reverse) G：
Cascaded
input
system
fault
indication
(reverse) H：
No
cascaded
input
system
fault
indication
(reverse)
※ TRL1M0A1P ※ TRL1M0A1N ※ TRL1M1A1P ※ TRL1M1A1N ※ TRL1U0A1P ※ TRL1U0A1N ※ TRL1U1A1P ※ TRL1U1A1N LOT136352299SCPE LOT136352299SCNE LOT136352299SCPO LOT136352299SCNO LOT136352299UCPE LOT136352299UCNE LOT136352299UCPO LOT136352299UCNO Sensors
Type Order
No.
(Actuator
+
Sensor) Actuator
Actuator
+
Sensor TRL1M0A1P-SE TRL1M0A1N-SE TRL1M1A1P-SE TRL1M1A1N-SE TRL1U0A1P-SE TRL1U0A1N-SE TRL1U1A1P-SE TRL1U1A1N-SE TRL1M0P-AC TRL1M0N-AC TRL1M1P-AC TRL1M1N-AC TRL1U0P-AC TRL1U0N-AC TRL1U1P-AC TRL1U1N-AC PNP/NPN PNP NPN PNP NPN PNP NPN PNP NPN ※ TRL1M0A1PE ※ TRL1M0A1NE ※ TRL1M1A1PE ※ TRL1M1A1NE ※ TRL1U0A1PE ※ TRL1U0A1NE ※ TRL1U1A1PE ※ TRL1U1A1NE LOT1E36352299SCPE LOT1E36352299SCNE LOT1E36352299SCPO LOT1E36352299SCNO LOT1E36352299UCPE LOT1E36352299UCNE LOT1E36352299UCPO LOT1E36352299UCNO TRL1M0A1PE-SE TRL1M0A1NE-SE TRL1M1A1PE-SE TRL1M1A1NE-SE TRL1U0A1PE-SE TRL1U0A1NE-SE TRL1U1A1PE-SE TRL1U1A1NE-SE TRL1M0P-AC TRL1M0N-AC TRL1M1P-AC TRL1M1N-AC TRL1U0P-AC TRL1U0N-AC TRL1U1P-AC TRL1U1N-AC PNP NPN PNP NPN PNP NPN PNP NPN Universal coding type Unique coding type Universal coding type Unique coding type Lock
holding
force
Fzh:7500N Fzh:2000N lock
type Electromagnetic locking Mechanical locking Electromagnetic locking Mechanical locking Electromagnetic locking Mechanical locking Electromagnetic locking Mechanical locking SHENZHEN
TONGCHUANG
MECHANTRONICS
CO.,LTD. ※ ※TRL1
4
(left
and
right)
Mounting
bracket:
mainly
used
with
revolving
door ※TRL1
1
Mounting
bracket:
Used
with
TSL1/TSL2
safety
latch.
For
details,
see
TSL1/TSL2
safety
latch Accessories
Selection
Table Mounting bracket Model Type Name Order
no. TRL1No.1 right
mounting
bracket LOTTRL1-ZJ01 LOTTRL1-ZJ02R LOTTRL1-ZJ02L LOTTRL1-ZJ03 LOTTRL1-ZJ04R LOTTRL1-ZJ04L LOTTRL1H03 LOTTRL1F03 LOTTRL1-LIN03 TRL1-ZJ01 TRL1-ZJ02R TRL1-ZJ02L TRL1-ZJ03 TRL1-ZJ04R TRL1-ZJ04L TRL1-H03 TRL1-F03 TRL1-LIN03 Application
Diagram Cable TRL1No.2 right
mounting
bracket TRL1No.2 left
mounting
bracket TRL1No.3 mounting
bracket TRL1No.4※ right
mounting
bracket TRL1No.4※ left
mounting
bracket Back
release
accessories Manual
release
key Single
head
3m
cable Installation
dimension
of
inductor 4 9 . 5


※ L o c k a b l e
r a n g e 4 7 . 5 ~ 5 1 . 5 136 9932 260 56.3 51.39 35 17.5 57 25 30 80 32 2 5 3 5 7 . 0 4 6 . 5 2 1 2 2 . 0 4 3 6 . 5 2 9 1 2 . 7 5 2 9 6 . 5 1 8 . 5 3 5 2 2 2 1 Φ4.2 Φ16 Φ12Φ26 Φ2.25 ※The
actual
size
and
weight
of
the
product
may
vary
depending
on
the
product
configuration
and
manufacturing
process.
















































































In
this
marking
method,
the
size
above
the
dimension
line
is
the
optimal
installation
size,
and
the
range
belo…

Text truncated - open the document above for the full version.

Shenzhen Tongchuang Mechantronics Co., Ltd. Agent Authorization Company: Shenzhen Tongchuang Mechantronics Co., Ltd. Address: 5th Floor, Building 8, Nangang Second Industrial Zone, 1026# SongBai Road, Xili Town, Nanshan District, Shenzhen, China Product Name: TRL1 Safety interlock Model Number(s): TRL1M0A1NE Product Description: TRL1 Safety interlock FCC ID：2A82Y-TRL1M0A1NE We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2022.11.09 Name: Timo.gan Title: Engineer Company: Shenzhen Tongchuang Mechantronics Co., Ltd.

Shenzhen Tongchuang Mechantronics Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022.11.09 Subject; Request for Confidentiality FCC ID: 2A82Y-TRL1M0A1NE To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Printed name:Timo.Gan Title:Engineer

Shenzhen Tongchuang Mechantronics Co., Ltd. Model difference statement Product Name: TRL1 Safety interlock Model Number(s): TRL1M0A1NE, TRL1M0N-AC, TRL1M0A1NE-SE Series Model : TRL1M0A1※P, TRL1M0A1※N, TRL1M1A1※P, TRL1M1A1※N, TRL1U0A1※P, TRL1U0A1※N, TRL1U1A1※P, TRL1U1A1※N, TRL1M0A1※PE, TRL1M0A1※NE, TRL1M1A1※PE, TRL1M1A1※NE, TRL1U0A1※PE, TRL1U0A1※NE, TRL1U1A1※PE, TRL1U1A1※NE ("※" means the "1" to the left of ※ is variable, see Model description for more details.Only the appearance and model name are different) FCC ID：2A82Y-TRL1M0A1NE Signature: Date: 2022.11.09 Name: Timo.gan Title: Engineer Company: Shenzhen Tongchuang Mechantronics Co., Ltd.

FCC ID: 2A82Y-TRL1M0A1NE Page 1/4 External photo FCC ID: 2A82Y-TRL1M0A1NE Page 2/4 FCC ID: 2A82Y-TRL1M0A1NE Page 3/4 FCC ID: 2A82Y-TRL1M0A1NE Page 4/4 --END---

Label Location

FCC ID: 2A82Y-TRL1M0A1NE Page 1/4 Internal photo FCC ID: 2A82Y-TRL1M0A1NE Page 2/4 antenna FCC ID: 2A82Y-TRL1M0A1NE Page 3/4 FCC ID: 2A82Y-TRL1M0A1NE Page 4/4 ---END---

版本: REV.A0 客 户 Customer ： 客户料号 Customer P/N ： 品 名 Description ： 产 品 型 号 CENKER P/N： 图 纸 编 号 Drawing No.： 产 品 编 号 Product code.： SP-CK112-00045674 产品承认书 SPECIFICATION FOR APPROVED PEAKING INDUCTORS CKOC0408-1mH/K-U01455-F 8039 文坚明梁增武梁贵传 SHENZHEN CENKER ENTERPRISE LTD. 地址:深圳市龙华区清泉路金博龙工业园C栋 Address:Building No.C Jinbolong Industrial Estate,Qingquan Road,Longhua District, Shenzhen P.R.China TEL:0755-89808755 FAX:0755-27525256 DATE： 2018-5-23 DATE： 深圳市岑科实业有限公司 制表审核批准 Prepared ByChecked ByApproved By 出图承认 DRAWING CUSTOMER APPROVAL RoHS COMPLIANT MODIFY RECORD PreparedChecked A02018-5-23 SymbolVersionDateContent ISSUE DATE2018-5-23VERSIONA0 CENKER P/NCKOC0408-1mH/K-U01455-FDRAWING No.SP-CK112-00045674 SPECIFICATION FOR APPROVAL CUSTOMER8039CUSTOMER No. RoHS COMPLIANT SCHEMATIC 梁贵传 1 /3 S HEN ZHEN CENKER ENTERPRIS E LTD. TE L:0755-89808755 FAX:0755-27525256 文坚明 梁增武 2、TEMPERATURE RATING: Operating Temperature : -25°C ~ +85°C ; Storage Temperature : -25°C ~ +85°C 深圳市岑科实业有限公司 PREPARED CHECKEDAPPROVED DE Ф6.0Max11.0Max12 .0 REF13.5±1.00.55±0.1 1、DIMENSION (mm)： ABC ISSUE DATE2018-5-23VERSIONA0 CENKER P/N CKOC0408-1mH/K-U01455-F DRAWING No.SP-CK112-00045674 SPECIFICATION FOR APPROVAL CUSTOMER8039Gain Max：PAGE RoHS COMPLIANT A B E EPOXY SERIAL NUMBER TOLERANCE INDUCTANCE SIZE CODE SERIES NAME CKOC 0408 - 1mH K - U0155 - F 0dbi HP-4284A SHEN ZHEN CENKER ENTERPRISE LTD. TEL:0755-89808755 FAX:0755-27525256 2/3 文坚明梁增武梁贵传 Q60REF125kHz/0.25V 深圳市岑科实业有限公司 PREPARED CHECKEDAPPROVED 6PinCP Ф0.55×17.5mm or equivalent6565 5EpoxyJ-600 or equivalent5163 4TubeUL Ф4 mm(BLACK) or equivalent6206 3SolderSn99.3-Cu0.7 or equivalent6050 2Wire（2UEW） or equivalent6177 Supplier Remark 1CoreDRWW4*8 or equivalent6003 4、MATERIAL LIST： No.MaterialSpecification Keysight 34420A IDC60mAL0A×90% Ref.1kHz/0.25V HP-4284A+HP-42841A DCR5ΩMax. at 25°C TEST FREQUENCY TEST EQUIPMENT INDUCTANCE1mH±10%1kHz/0.25VHP-4284A 3、ELECTRICAL REQUIREMENTS： ITEMSPEC.TOLERANCE ISSUE DATE2018-5-23VERSIONA0 CENKER P/N CKOC0408-1mH/K-U01455-F DRAWING No.SP-CK112-00045674 SPECIFICATION FOR APPROVAL CUSTOMER8039CUSTOMER No. PAGE RoHS COMPLIANT 10PCS 25 °C 75% IDC 60mA 1mH5Ω60 ±10% Max.REF 10.98 0.93 3.86 59.04.689.5612.0212.900.53 20.99 0.94 3.86 58.04.689.6812.1613.200.55 30.98 0.93 3.82 59.04.699.6612.0612.950.54 40.98 0.93 3.85 58.04.679.6512.0813.600.53 50.97 0.92 3.84 61.04.699.6212.4013.260.54 60.99 0.94 3.84 62.04.699.6312.2213.330.55 70.97 0.92 3.85 59.04.689.6412.4213.400.54 80.99 0.94 3.86 59.04.679.6812.3212.840.54 91.00 0.95 3.86 61.04.699.7212.2613.200.54 101.01 0.96 3.88 60.04.679.6512.1813.320.53 X0.990.943.8559.604.689.6512.2113.200.54 R0.040.040.064.000.020.160.400.760.02 文坚明梁增武梁贵传 DIMENSION(UNIT：mm） E 0.55±0.1 C 12 .0 REF D 13.5±1.0 A Ф6.0Max B 11.0Max APPROVED SHEN ZHEN CENKER ENTERPRISE LTD. TEL:0755-89808755 FAX:0755-27525256 SPEC L L0A× 90% Ref. DCR Q IDC ■HP-4284A+HP-42841A □HM-2713-1+HM-2791 LCR 深圳市岑科实业有限公司 PREPAREDCHECKED L □CH-1062A ■HP-4284A Q □HM2801A □HM9481 □CJ2851 DCR ■Keysight 34420A SRF □HM9460 TEST EQUIPMENT： ALL JUDGE ■OK □ NG TEMPERATUREHUMIDITY 5.TESTING DATA: ELECTRONICAL TEST DATA OREALL DIMENSTON（UNIT：mm） DESCRIPTIONPEAKING INDUCTORS TEST FREQ1kHz/0.25V 2018-5-23 DRAWING No.SP-CK112-00045674 CENKER P/NCKOC0408-1mH/K-U01455-F CUSTOMER No. QUANTITYDATE SPECIFICATION FOR APPROVAL PAGE:3/3 CUSTOMER8039LOT No. RoHS COMPLIANT A B E EPOXY

P age 1 of 21 Address:No.11,WuSongRoad, Tel: 86-769-22607797 DongchengDistrict,Dongguan, Fax: 86-769-22607907 GuangdongProvince,China523117 http://www.cpcteam.com TEST REPORT Report Number. ....................... : 90899-22-72-22-PP001 Date of issue ............................ : 2022.11.09 Tested by (+signature) ............ : Duke Chen Approved by (+signature) ...... : Jason Gao Testing Laboratory name ....... : SLG-CPC Testlaboratory Co., Ltd. Address .................................... : No. 11, Wu Song Road, Dongcheng District, Dongguan, Guangdong Province, China 523117 Applicant’s name .................... : Shenzhen Tongchuang Mechantronics Co., Ltd. Address .................................... : 5th Floor, Building 8, Nangang Second Industrial Zone, 1026# SongBai Road, Xili Town, Nanshan District, Shenzhen, China Manufacturer’s name ............ : Shenzhen Tongchuang Mechantronics Co., Ltd. Address .................................... : 5th Floor, Building 8, Nangang Second Industrial Zone, 1026# SongBai Road, Xili Town, Nanshan District, Shenzhen, China Factory’s name ...................... : Shenzhen Tongchuang Mechantronics Co., Ltd. Address .................................... : 5th Floor, Building 8, Nangang Second Industrial Zone, 1026# SongBai Road, Xili Town, Nanshan District, Shenzhen, China Standard(s) .............................. : FCC Rules and Regulations Part 15 Subpart C, Section 209 Test item description .............. : TRL1 Safety interlock Trade Mark ............................... : Test Model/Type reference ..... : TRL1M0A1NE FCC ID ...................................... : 2A82Y-TRL1M0A1NE Date of receipt of test item ..... : 2022.10.20 Date (s) of performance of test: 2022.10.20-2022.10.27 Summary of Test Results ....... : Pass The Summary of Test Results based on a technical opinion belongs to the standard(s). General disclaimer: This report shall not be reproduced except in full, without the written approval of SLG-CPC Testlaboratory Co., Ltd. The test results in the report only apply to the tested sample. 90899-22-72-22-PP001 Page 2 of 21 Address:No.11,WuSongRoad, Tel: 86-769-22607797 DongchengDistrict,Dongguan, Fax: 86-769-22607907 GuangdongProvince,China523117 http://www.cpcteam.com TABLE OF CONTENT TABLE OF CONTENT .............................................................................................................................................. 2 1. SUMMARY OF TEST RESULTs ........................................................................................................................... 3 2. GENERAL INFORMATION ................................................................................................................................... 4 2.1. Description of Device (EUT) ........................................................................................................................... 4 2.2. Independent Operation Modes ....................................................................................................................... 6 2.3. Description of Test Facility .............................................................................................................................. 6 2.4. Description of Support Device ........................................................................................................................ 7 2.5. Measurement Uncertainty............................................................................................................................... 7 3. MEASURING DEVICE AND TEST EQUIPMENT ................................................................................................ 8 3.1. MEASUREMENT EQUIPMENT USED .......................................................................................................... 8 4. 20DB BANDWIDTH .............................................................................................................................................. 9 4.1. Test Procedure ................................................................................................................................................ 9 4.2. Test Results .................................................................................................................................................... 9 5. POWER LINE CONDUCTED EMISSION MEASUREMENT ............................................................................. 10 5.1. Block Diagram of Test Setup ........................................................................................................................ 10 5.2. Limits ............................................................................................................................................................. 10 5.3. Test Procedure .............................................................................................................................................. 10 5.4. Measuring Results ......................................................................................................................................... 11 6. Radiated Emission Test ...................................................................................................................................... 12 6.1. Measurement Procedure .............................................................................................................................. 12 6.2. Test SET-UP (Block Diagram of Configuration) ............................................................................................ 12 6.3. Radiated Emission Limit ............................................................................................................................... 13 6.4. Measurement Result..................................................................................................................................... 14 90899-22-72-22-PP001 Page 3 of 21 Address:No.11,WuSongRoad, Tel: 86-769-22607797 DongchengDistrict,Donggua…

Text truncated - open the document above for the full version.

FCC ID: 2A82Y-TRL1M0A1NE Test photo Below 30 MHz 30‐1 000MHz