2A86X-LIGHTPB02Area Camp Light

YOUR LOCAL SALES OFFICE dometic Ķ ,*ű0)"0Ŗ,= " s YOUR LOCAL DEALER dometic.com/dealer YOUR LOCAL SUPPORT dometic.com/contact dometic.com 
*+-)"1"
)&01
*#
*+"1&
*+-,&"0ķ
4%& %
*+-/&0"
1%"
*+"1&
/*2-ķ
,
"
#*2,!
&,
1%"
-2)&
9)&,$0
*#ĸ
DOMETIC GROUP AB




"+3E/,0$1,
ĉč




ŖĉďĉčČ
*),




4"!", DometicInteractDometic Group AB 1 13 0 13 0 90 2 3 4 5 6 7 8 h 100% 25%25% 50% 75% 100% 8 9 *ye= EN Yellow, DE Gelb, FR Jaune, ES Amarillo, PT Amarelo, IT Giallo, NL Geel, DA Gul, SV Gul, NO Gul, FI Keltainen, RU
źƹƿdžǏƽķ
PL
Ć¹Ÿ16ķ
SK
Ă)1Aķ
CS
Ă)21Aķ
HU
A/$ķ
TR
0/•ķ SL Rumena, BG
ƺǎƿdžǂķ
AR فصأ *ye 0 1. 2. 4 h INPUT 3. OUTPUT 1. 2. 3. a Operating manual Safety instructions! WARNING! • Do not expose the product to heat or fire. Do not store in direct sunlight or in a vehicle.• Do not use or charge the product if it is da maged. In the event of battery fluid leakage, keep away from skin and eyes. Wash any affected area with large amounts of water and seek medical attention. Injury hazard • Under abusive conditions, liquid may be ej ected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burn. Intended useThis area light is suitable for:• Indoor use • Outdoor use The area light is not suitable for: • Underwater use • Use in environments with strong water jets This product is only suitable for the intended purp ose and application in accordance with these instructions. This manual provides information that is necessary for prop er installation and/or operation of the product. Poor installation and/or improper operating or maintenance w ill result in unsatisfactory p erformance and a possible fail- ure.The manufacturer accepts no liability for any injury or damage to the product resulting from:• Incorrect assembly or connection, including excess voltage • Incorrect maintenance or use of spare parts other than original spare parts pr ovided by the manufacturer • Alterations to the product withou t express permission from the manufacturer • Use for purposes other than th ose described in this manual Dometic reserves the right to change produ ct appearance and product specifications. OperationOnly use the product with Listed/Certified Information T echnology (Computer) Equipm ent, a Listed/Certified ITE Power Supply, or a Listed Class 2 Power Unit.The product needs to be charged b efore use. Always use the suitable USB cable and refer to the manufacturer's instructions for proper charging instructions.Only use the product with Listed/Certified Information T echnology (Computer) Equipm ent, a Listed/Certified ITE Power Supply, or a Listed Class 2 Power Unit.End user should choo se a UL Class 2 adapter. DisposalRecycling packaging materialRecycling products with non-replaceable ba tteries, rechargeable batteries or light sourcesTechnical dataFurther product information can be accessed via QR co de on the energy label on the product or via eprel.ec.europa.eu.Legal!This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interferen ce received, including interference that may cause undesired operation. Changes or modifications not expressly ap proved by the party responsible fo r compliance could void the user's authority to operate the equipment. ➤ Place the packaging material in the appr opriate recycling waste bins wherever possible. ➤ If the product contains any non-replaceable batteries, rechargeable batteries or light sources, you don't have to remove th em before disposal. ➤ If you wish to finally dispose of the product, ask your local recy cling center or specialist dealer for details about how to do this in accordance with the applicable disp osal regulations. ➤ The product can be disposed free of charge. GLO-A400 Battery type: Lithium-Polymer / LiPo Battery rated capacity: 7.000 mAh Max. power consumption: 7.5 W Input voltage: 5 V g , 2 A (USB-C) Output voltage: 5 V g , 2 A (USB-A) Operating temperature: –20 °C to +45 °C Charging temperature: 0 °C to +40 °C Color temperature: 2700 K to 7000 K Brightness: 400 lm Radio frequency: 2.4 GHz Max. radio frequen cy power: 4 dBm Dimensions (L x W x H): 130 x 90 x 130 mm Weight: 550 g Conformity: CAUTION! Injury and material damageDo not make any changes or modifications to the product that have not been expressly approved by the party re sponsible for compliance. EN This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are d esigned to provide reasonable protecti on against harmful interference in a resi- dential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harm ful interference to radio comm unications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter- ference to radio or television reception, which can be determ ined by turning the equipme nt off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experien ced radio/TV techni cian for help. This device complies with Industry Ca nada license-exempt RSS standard(s). Operati on is subject to the following two conditions: • This device may not cause interference. • This device must accept any interference, including in terference that may cause undesired operation of the device. This Class B digital apparatus co mpli…

Text truncated - open the document above for the full version.

，、）D。METIC Applicant as U.S. Agent Letter of Attestation To: Federal c。mmunicati。nsc。mmission 7 435 Oakland Mills Road, Columbia, MD 2’046, USA Ref: Attestation S幅tement- Part 2.91’（d)(7) filing FCC ID: 2A86X-LIGHTPB02 Date: April-14-2023 D。meticc。rporation（ “ the applicant ” ） as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation。r the conclusion 。f any Commissi。n-relatedadministrative or judicial pro臼eding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. Desianated U.S. Aaent from Applicant c。moanv Company Name: Dometic Corporation Contact Person:kevin.fletcher Address: 5155 Verdant Drive Elkha『tIN 46516 USA Tel.:574-218-3863 Email: ke叩[email protected] FCC FRN: 0033044066 Sincerely yours, � fψγ／一一 �： l ：� ed 位 ： ；：；：�·�：；时石3忖 l 向JWn)A-α咐叭 Email: kevin. fletcher@d。metic.com

TCBAuthoritytoActasAgent Number:MS-0045317 Revision:0 Effectivedate:Oct8,2021 Page1of1 AuthoritytoActasAgent Date:23February2023 TUVRheinlandofNorthAmerica,Inc. 1279QuarryLane.,Suite.A Pleasanton,CA94566 ToWhomItMayConcern: IappointTUVRheinland(Shenzhen)Co.,Ltd.toactasouragentinthepreparationofthis applicationforequipmentcertification.Icertifythatsubmitteddocumentsproperlydescribethedevice orsystemforwhichequipmentcertificationissought.Ialsocertifythateachunitmanufactured, importedormarketed,asdefinedintheFCCorIndustryCanada’sregulationswillhaveaffixedtoita labelidenticaltothatsubmittedforapprovalwiththisapplication. Forinstanceswhereourauthorizedagentsignstheapplicationforcertificationonourbehalf,I acknowledgethatallresponsibilityforcomplyingwiththetermsandconditionsforCertification,as specifiedbyTUVRheinlandGroup,stillresideswithDometicCorporation /5155VerdantDriveElkhartIN46516USA/201-710RedbrickSt.VictoriaBCV8T5J3Canada ForTCBapplications,Wecertifythatwearenotsubjecttodenialoffederalbenefits,thatincludes FCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21U.S.C.862.Further, noparty,asdefinedin47CFR1.2002(b),totheapplicationissubjecttodenialoffederalbenefits, thatincludesFCCbenefits. Thankyou, AgencyAgreementDate:12Months Agreementisvalidfor12monthsfromtheabovedate. By: __________________________kevin.fletcher (Signature)(Printname) CertificationEngineerTel:574-218-3863 (Title)(Telephone) Onbehalfof: DometicCorporation (CompanyName)

ShenzhenAi-ThinkerTechnology Co.,Ltd -1- SPECIFICAT IONFORAPPROVAL Shenzhen Ai-Thinker Technology Co., Ltd PB-02 CUST OMER： ADDRESS : CUS PART NO: PART NAME: BT Antenna Edition： 1.0 7th Floor, Block B, Nanchang Huafeng Second Industrial Park, Xixiang Gushu Aviation Road, Shenzhen City, Guangdong Province. ShenzhenAi-ThinkerTechnology Co.,Ltd -2- Directory 1 、 Product picture ..............................................................3 2、 Performance parameter ......................................................3 3 、 VSWR ..........................................................................4 4、 Passive test data ...........................................................5 5、 Radiation pattern ............................................................5 ShenzhenAi-ThinkerTechnology Co.,Ltd -3- Productspecification 1、 Product picture 2、Performance parameter NameBT Antenna Model TypePCB Print Antenna ELECTRICAL SPECTFICATIONS Frenquency Range2400-2500MHz Band Width100MHz Impedance50Ω ShenzhenAi-ThinkerTechnology Co.,Ltd -4- VSWR< 2.0 Max Gain1.71dBi PolarizationVertical/Horizontal RadiationOmnidirectional Power50 W MECHANICAL SPECTFICATIONS ConnectorWelding type Working Temperature-40°C - + 85°C Limit Temperature-40°C - + 125°C 3、VSWR ShenzhenAi-ThinkerTechnology Co.,Ltd -5- 4、Passive test data: Frequency (MHz)24002410242024302440245024602470248024902500 Gain (dBi)1.241.341.531.481.601.711.541.441.421.111.06 Efficiency (%)39.9741.1543.0942.5343.5244.8643.8444.0544.8642.3142.69 5、Radiation pattern

RF ANT

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN22DRUQ 003 Auftrags-Nr.: Order no.: 168386361 Seite 1 von 3 Page 1 of 3 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2022-08-15 Auftraggeber: Client: Dometic Corporation 5155 Verdant Drive Elkhart IN 46516 USA Prüfgegenstand: Test item: Area Camp Light Bezeichnung / Typ-Nr.: Identification / Type no.: GLO-A400 (Trademark: DOMETIC) Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: CFR47 FCC Part 2: Section 2.1093 CFR47 FCC Part 1: Section 1.1310 KDB 447498 D01 General RF Exposure Guidance v06 Wareneingangsdatum: Date of sample receipt: 2022-08-24 Please refer to Photo Document Prüfmuster-Nr.: Test sample no: A003323193-001~002 A003314872-016 /020 Prüfzeitraum: Testing period: 2022-09-01 – 2022-09-16 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Breeze Jiang genehmigt von: authorized by: X Signed by: Lin Lin Datum: Date: 2023-02-15 Ausstellungsdatum: Issue date: 2023-02-15 Stellung / Position: Assistant Project Manager Stellung / Position: Reviewer Sonstiges / Other: FCC ID: 2A86X-LIGHTPB02 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland (Shenzhen) Co., Ltd. 1601 R&D Room, 1602-1604, 17-18F, Building 7 Site C, Vanke Cloud City Phase I, Xingke First Street, Xili Street, Xili Community, Nanshan District, Shenzhen 518052, P.R. China Mail: [email protected] · Web: www.tuv.com jjj Prüfbericht - Produkte Test Report - Products CN22DRUQ 003 Page 2 of 3 1. Radio Frequency Exposure RESULT: Pass Test standard : FCC Part 2: Section 2.1093 CFR47 FCC Part 1: Section 1.1310 KDB 447498 D01 General RF Exposure Guidance v06 1.1 Product Technical Information The EUT is a Area Camp Light, it supports Buletooth BLE(1Mbps,2Mbps) wireless technology. For details refer to the User Manual, Technical Description and Circuit Diagram. General Information of EUT Value Kind of Equipment Area Camp Light Type Designation GLO-A400 Operating Voltage USB-C operated (5Vdc) or Internal battery operated (3.7Vdc) Radiofrequency operating mode Bluetooth BLE: operating within 2400-2483.5MHz, 1Mbps&2Mbps FCC ID 2A86X-LIGHTPB02 Technical Specification of Bluetooth Operating Frequency 2402-2480MHz Type of Modulation GFSK Data Rate 1Mbps, 2Mbps Channel Number 40 channels for Bluetooth BLE Channel Separation 1MHz and 2MHz Antenna Type Integral Antenna Antenna Number 1 Antenna Gain 1.71 dBi The type of wideband data transmission equipment Non-FHSS Prüfbericht - Produkte Test Report - Products CN22DRUQ 003 Page 3 of 3 1.2 Result: According to the KDB 447498 D1 v06 section 4.3.1: The maximum conducted output power for the EUT is 4.04dBm=2.54mW. The SAR Exclusion Threshold Level for 1-g extremity SAR: = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz) = 3.0 * 5 / sqrt (2.480) mW = 9.53 mW Since the max. conducted output power is well below the SAR low threshold level, so the EUT is considered to comply with SAR requirement without testing.

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN22DRUQ 002 Auftrags-Nr.: Order no.: 168386361 Seite 1 von 20 Page 1 of 20 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2022-08-15 Auftraggeber: Client: Dometic Corporation 5155 Verdant Drive Elkhart IN 46516 USA Prüfgegenstand: Test item: Area Camp Light Bezeichnung / Typ-Nr.: Identification / Type no.: GLO-A400 (Trademark: DOMETIC) Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: CFR47 FCC Part 15: Subpart C Section 15.247 CFR47 FCC Part 15: Subpart C Section 15.207 CFR47 FCC Part 15: Subpart C Section 15.209 Wareneingangsdatum: Date of sample receipt: 2022-08-24 Please refer to Photo Document Prüfmuster-Nr.: Test sample no: A003323193-001~002 A003314872-016 /020 Prüfzeitraum: Testing period: 2022-09-01 – 2022-09-16 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Breeze Jiang genehmigt von: authorized by: X Signed by: Lin Lin Datum: Date: 2023-02-15 Ausstellungsdatum: Issue date: 2023-02-15 Stellung / Position: Assistant Project Manager Stellung / Position: Reviewer Sonstiges / Other: FCC ID: 2A86X-LIGHTPB02 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland (Shenzhen) Co., Ltd. 1601 R&D Room, 1602-1604, 17-18F, Building 7 Site C, Vanke Cloud City Phase I, Xingke First Street, Xili Street, Xili Community, Nanshan District, Shenzhen 518052, P.R. China Mail: [email protected] · Web: www.tuv.com Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN22DRUQ 002 Seite 2 von 20 Page 2 of 20 Test Summary 5.1.1 ANTENNA REQUIREMENT RESULT: Pass 5.1.2 MAXIMUM PEAK CONDUCTED OUTPUT POWER RESULT: Pass 5.1.3 CONDUCTED POWER SPECTRAL DENSITY RESULT: Pass 5.1.4 6DB BANDWIDTH RESULT: Pass 5.1.5 CONDUCTED SPURIOUS EMISSIONS MEASURED IN 100 KHZ BANDWIDTH RESULT: Pass 5.1.6 RADIATED SPURIOUS EMISSION RESULT: Pass 5.1.7 CONDUCTED EMISSION ON AC MAINS RESULT: Pass Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN22DRUQ 002 Seite 3 von 20 Page 3 of 20 Contents 1 GENERAL REMARKS ........................................................................................................................... 4 1.1 COMPLEMENTARY MATERIALS ............................................................................................................ 4 2 TEST SITES ........................................................................................................................................ 5 2.1 TEST FACILITIES ................................................................................................................................. 5 2.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS................................................................................. 5 2.3 TRACEABILITY .................................................................................................................................... 6 2.4 CALIBRATION ..................................................................................................................................... 6 2.5 MEASUREMENT UNCERTAINTY............................................................................................................. 6 2.6 LOCATION OF ORIGINAL DATA ............................................................................................................. 6 2.7 STATUS OF FACILITY USED FOR TESTING ............................................................................................. 7 3 GENERAL PRODUCT INFORMATION ...................................................................................................... 8 3.1 PRODUCT FUNCTION AND INTENDED USE ............................................................................................. 8 3.2 RATINGS AND SYSTEM DETAILS .......................................................................................................... 8 3.3 INDEPENDENT OPERATION MODES ...................................................................................................... 9 3.4 NOISE GENERATING AND NOISE SUPPRESSING PARTS ......................................................................... 9 3.5 SUBMITTED DOCUMENTS..................................................................................................................... 9 4 TEST SET-UP AND OPERATION MODES ..............................................................................................10 4.1 PRINCIPLE OF CONFIGURATION SELECTION .......................................................................................10 4.2 TEST OPERATION AND TEST SOFTWARE ............................................................................................10 4.3 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ..........................................................................10 4.4 COUNTERMEASURES TO ACHIE…

Text truncated - open the document above for the full version.

Prüfbericht - Produkte Test Report - Products Appendix B CN22DRUQ 002 Page 1 of 39 Appendix B: Test Results of Bluetooth Low Energy APPENDIX B: TEST RESULTS OF BLUETOOTH LOW ENERGY..................................................................................................... 1 APPENDIX B.1: TEST RESULTS OF CONDUCTED POWER SPECTRAL DENSITY ......................................................................................... 2 APPENDIX B.2: TEST RESULTS OF 6DB BANDWIDTH ......................................................................................................................... 5 APPENDIX B.3: TEST RESULTS OF 99% BANDWIDTH......................................................................................................................... 8 APPENDIX B.4: TEST RESULTS OF CONDUCTED SPURIOUS EMISSIONS MEASURED IN 100 KHZ BANDWIDTH......................................... 11 Conducted Spurious Emission ............................................................................................................................................ 11 Band Edge ........................................................................................................................................................................... 18 APPENDIX B.5: TEST RESULTS OF RADIATED SPURIOUS EMISSIONS .................................................................................................. 20 30 MHz - 1GHz .................................................................................................................................................................... 20 1GHz - 18GHz ...................................................................................................................................................................... 22 APPENDIX B.6: TEST RESULTS OF RADIATED EMISSIONS IN RESTRICTED BANDS ................................................................................. 34 APPENDIX B.7: TEST RESULTS OF CONDUCTED EMISSION ON AC MAINS .......................................................................................... 38 Prüfbericht - Produkte Test Report - Products Appendix B CN22DRUQ 002 Page 2 of 39 Appendix B.1: Test Results of Conducted Power Spectral Density TestMode Antenna Channel Result[dBm/3-100kHz] Limit[dBm/3kHz] Verdict BLE_1M Ant1 2402 -5.56 ≤8.00 PASS 2440 -5.10 ≤8.00 PASS 2480 -5.86 ≤8.00 PASS BLE_2M Ant1 2402 -11.45 ≤8.00 PASS 2440 -11.48 ≤8.00 PASS 2480 -11.66 ≤8.00 PASS Prüfbericht - Produkte Test Report - Products Appendix B CN22DRUQ 002 Page 3 of 39 BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Prüfbericht - Produkte Test Report - Products Appendix B CN22DRUQ 002 Page 4 of 39 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 BLE_2M_Ant1_2480 Prüfbericht - Produkte Test Report - Products Appendix B CN22DRUQ 002 Page 5 of 39 Appendix B.2: Test Results of 6dB Bandwidth TestMode Antenna Channel DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 0.620 2401.728 2402.348 0.5 PASS 2440 0.664 2439.732 2440.396 0.5 PASS 2480 0.672 2479.720 2480.392 0.5 PASS BLE_2M Ant1 2402 1.160 2401.476 2402.636 0.5 PASS 2440 1.188 2439.440 2440.628 0.5 PASS 2480 1.184 2479.452 2480.636 0.5 PASS Prüfbericht - Produkte Test Report - Products Appendix B CN22DRUQ 002 Page 6 of 39 BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Prüfbericht - Produkte Test Report - Products Appendix B CN22DRUQ 002 Page 7 of 39 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 BLE_2M_Ant1_2480 Prüfbericht - Produkte Test Report - Products Appendix B CN22DRUQ 002 Page 8 of 39 Appendix B.3: Test Results of 99% Bandwidth TestMode Antenna Channel OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 1.0238 2401.5508 2402.5746 --- PASS 2440 1.0276 2439.5515 2440.5791 --- PASS 2480 1.0316 2479.5496 2480.5812 --- PASS BLE_2M Ant1 2402 2.0335 2401.0519 2403.0854 --- PASS 2440 2.0242 2439.0540 2441.0782 --- PASS 2480 2.0365 2479.0516 2481.0881 --- PASS Prüfbericht - Produkte Test Report - Products Appendix B CN22DRUQ 002 Page 9 of 39 BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Prüfbericht - Produkte Test Report - Products Appendix B CN22DRUQ 002 Page 10 of 39 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 BLE_2M_Ant1_2480 Prüfbericht - Produkte Test Report - Products Appendix B CN22DRUQ 002 Page 11 of 39 Appendix B.4: Test Results of Conducted Spurious Emissions Measured in 100 kHz Bandwidth Conducted Spurious Emission TestMode Antenna Channel FreqRange [MHz] Ref Level [dBm] Result[dBm] Limit[dBm] Verdict BLE_1M Ant1 2402 Ref erence 3.97 3.97 --- PASS 30~1000 3.97 -46.24 ≤-16.03 PASS 1000~26500 3.97 -39.05 ≤-16.03 PASS 2440 Ref erence 2.25 2.25 --- PASS 30~1000 2.25 -46.7 ≤-17.75 PASS 1000~26500 2.25 -39.22 ≤-17.75 PASS 2480 Ref erence 3.60 3.60 --- PASS 30~1000 3.60 -46.24 ≤-16.4 PASS 1000~26500 3.60 -39.21 ≤-16.4 PASS BLE_2M Ant1 2402 Ref erence 0.51 0.51 --- PASS 30~1000 0.51 -46.21 ≤-19.49 PASS 1000~26500 0.51 -38.6 ≤-19.49 PASS 2440 Ref erence 1.24 1.24 --- PASS 30~1000 1.24 -46.43 ≤-18.76 PASS 1000~26500 1.24 -39.63 ≤-18.76 PASS 2480 Ref erence 1.72 1.72 --- PASS 30~1000 1.72 -46.41 ≤-18.28 PASS 1000~26500 1.72 -39.47 ≤-18.28 PASS Prüfbericht - Produkte Test Report - Products Appendix B CN22DRUQ 002 Page 12 of 39 BLE_1M_Ant1_2402_0~Ref erence BLE_1M_Ant1_2402_30~1000 BLE_1M_Ant1_2402_1000~26500 Prüfbericht - Produkte Test Report - Products Appendix B CN22DRUQ 002 Page 13 of 39 BLE_1M_Ant1_2440_0~Ref erence BLE_1M_Ant1_2440_30~1000 BLE_1M_Ant1_2440_1000~26500 Prüfbericht - Produkte Test Report - Products Appendix B CN22DRUQ 002 Page 14 of 39 BLE_1M_Ant1_2480_0~Ref erence BLE_1M_Ant1_2480_30~1000 BLE_1M_Ant1_2480_1000~26500 Prüfbericht - Produkte Test Report - Products Appendix B CN22DRUQ 002 Page 15 of 39 BLE_2M_Ant1_2402_0~Ref erence BLE_2M_Ant1_2402_30~1000 BLE_2M_Ant1_2402_1000~26500 Prüfbericht - Produkte Test Report - Products Appendix B CN22DRUQ 002 Page 16 of 39 BLE_2M_Ant1_2440_0~Ref erence BLE_2M_Ant1_2440_30~1000 BLE_2M_Ant1_2440_1000~26500 Prüfbericht - Produkte Test Report …

Text truncated - open the document above for the full version.

Prüfbericht - Produkte Test Report - Products Appendix A CN22DRUQ 002 Page 1 of 3 Appendix A: Photographs of the Test Set-Up APPENDIX A: PHOTOGRAPHS OF THE TEST SET-UP.................................................................................................................. 1 PHOTOGRAPH 1: SET-UP PHOTO FOR RADIATED SPURIOUS EMISSION, 30MHZ - 1GHZ ......................................................................... 2 PHOTOGRAPH 2: SET-UP PHOTO FOR RADIATED SPURIOUS EMISSION, 1GHZ - 18GHZ .......................................................................... 2 PHOTOGRAPH 3: SET-UP PHOTO FOR CONDUCTED EMISSION ON AC MAINS ......................................................................................... 3 Prüfbericht - Produkte Test Report - Products Appendix A CN22DRUQ 002 Page 2 of 3 Photograph 1: Set-up photo for Radiated Spurious Emission, 30MHz - 1GHz Photograph 2: Set-up photo for Radiated Spurious Emission, 1GHz - 18GHz Prüfbericht - Produkte Test Report - Products Appendix A CN22DRUQ 002 Page 3 of 3 Photograph 3: Set-up photo for Conducted Emission on AC Mains