2A88MFP602Dynamic Running Pod

USER MANUAL Dynamic Running Pod English Version v1.2 2. Product Accessories Thank you for purchasing this product. This is a dynamic running pod suitable for professional training. It could be maintaining the same accuracy in both outdoor and indoor running since it does not rely on the GPS. The running pod could transmit running data to your sports health App in real time via Bluetooth or ANT+, helping you manage sports intensity more scientifically.This user manual will help you to use the product better, please keep it for reference. Clip*1 Charging Cable*1 User Manual*1 Running Sensor*1 2 1. Product Introduction 3 Stride length, Cadence, Running Data Bluetooth 5.0 & ANT+ Rechargeable lithium battery Continuous measurement for 28 hours 41.8 x 28.2 x 9.0mm 8g IP67 0°C ~ 45°C 3. Basic Parameters Features Wireless Battery Battery Life Size Weight Waterproof Level Working Temperature 4 4. Wearing Method Step 1 Please insert the clip into the shoelace in the middle of the shoe to prevent it from loosening. Please insert the sensor into the clip. When inserting, align the groove on the bottom of the sensor with the snap-on protrusions, and then fix the sensor in the clip. Step 2 Please point the sensor LED light towards the toe LED Light Off Green Light On Blue Light On Red Light Flashing Red Light On Standby Running State Bluetooth Connecting Charging Finished Charging 5. Indicator Status LED ColorState 5 6 6. Charging 6.1 Please charge the device before first time use; 6.2 Please use DC 5V power adaptor for charging; 6.3 When charging, the red light will flashes three times every two seconds, red light stay on means fully charged. Align metal terminals 7 The product has a built-in battery. Do not throw the product into a fire. Please choose an adapter that meets the rated voltage of the device to charge the device to avoid damage to the devic. USB connection DC 5V power adapter or computer USB 8 7. Disclaimer 7.1 The product it describes are subject to change without prior notice, due to the manufacturer's continuous development program. 7.2 Our company shall not bear any legal responsibility for direct or indirect, accidental or special damages, losses and expenses arising from or related to the use of this manual and the products described in it. 9 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. 10 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE B ASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : JaneDesigned by : KenChecked by : MikeApproved by烉Herbert TITLE烉3.2 x 1.6 x 1.3 WiFi / Bluetooth Chip Antenna (CW324S) Engineering Specification DOCUMENT H2U38D1E1B0100 REV. NO. C PAGE 1 OF 11 H 2 1 8 D E B 1 0 U 3 0 1 0 3.2 x 1.6 x 1.3 (mm) WiFi / Bluetooth Chip Antenna (CW324S) Engineering Specification 1.Product Number 2.Features *Stable and reliable in performances *Low profile, compact size *RoHS 2.0 compliance *SMT processes compatible *AEC-Q200 compliant 3.Applications *ISM 2.4 GHz applications *ZigBee/BLE applications *Bluetooth earphone systems *Hand-held devices when WiFi / Bluetooth functions are needed, e.g., Smartphones *IEEE802.11 b/g/n *Wireless PCMCIA cards or USB dongles 4.Description Unictron’s CW324S chip antenna is designed for ISM 2.4GHz applications, covering frequencies 2400~2500 MHz. Fabricated with proprietary design and processes, CW324S shows excellent performance and is fully compatible with SMT processes, which can decrease the assembly cost and improve the device’s quality and consistency. ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE B ASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : JaneDesigned by : KenChecked by : MikeApproved by烉Herbert TITLE烉3.2 x 1.6 x 1.3 WiFi / Bluetooth Chip Antenna (CW324S) Engineering Specification DOCUMENT H2U38D1E1B0100 REV. NO. C PAGE 2 OF 11 5.Layout Guide & Electrical Specifications 5-1. Layout Guide (unitǺmm) Solder Land Pattern: The solder land pattern (gold marking areas) is shown below. Recommendation on matching circuit will be provided according to the customer’s installation conditions. Top ViewBottom View Signal Input Transmission Line with 50ȍ Impedance Characteristic ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE B ASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : JaneDesigned by : KenChecked by : MikeApproved by烉Herbert TITLE烉3.2 x 1.6 x 1.3 WiFi / Bluetooth Chip Antenna (CW324S) Engineering Specification DOCUMENT H2U38D1E1B0100 REV. NO. C PAGE 3 OF 11 5-2. Electrical Specifications (Evaluation Board Dimensions: 40 x 40 mm 2 ) 5-2-1. Electrical Table Characteristics Specifications Unit Outline Dimensions 3.2 x 1.6 x 1.3 mm Working Frequency 2400 ~ 2500 MHz VSWR(@ center frequency)* 2 Max. Characteristic Impedance 50 : Polarization Linear Polarization Peak Gain (@2437 MHz) 1.6dBi Efficiency 56.3 % *Center frequency means the frequency with the lowest value in return loss of the chip antenna on the evaluation board. **A typical value is for reference only, not guaranteed. 5-2-2. Return Loss & VSWR Return Loss (S 11 )VSWR (S 11 ) ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE B ASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : JaneDesigned by : KenChecked by : MikeApproved by烉Herbert TITLE烉3.2 x 1.6 x 1.3 WiFi / Bluetooth Chip Antenna (CW324S) Engineering Specification DOCUMENT H2U38D1E1B0100 REV. NO. C PAGE 4 OF 11 6.Outline Dimensions of Antenna & Evaluation Board (unit: mm) 6-1. Antenna Dimensions PIN Definitions PIN 1 2 Soldering PAD Signal N/C ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE B ASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : Jane Designed by : Ken Checked by : Mike Approved by烉Herbert TITLE烉3.2 x 1.6 x 1.3 WiFi / Bluetooth Chip Antenna (CW324S) Engineering Specification DOCUMENT H2U38D1E1B0100 REV. NO. C PAGE 5 OF 11 6-2. Evaluation Board with Antenna Unit: mm ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE B ASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : Jane Designed by : Ken Checked by : Mike Approved by烉Herbert TITLE烉3.2 x 1.6 x 1.3 WiFi / Bluetooth Chip Antenna (CW324S) Engineering Specification DOCUMENT H2U38D1E1B0100 REV. NO. C PAGE 6 OF 11 7. Radiation Pattern (with 40 x 40 mm 2 Evaluation Board) 7-1. 3D Gain Radiation Pattern @ 2442 MHz (unit: dBi) X Z Y ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE B ASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : Jane Designed by : Ken Checked by : Mike Approved by烉Herbert TITLE烉3.2 x 1.6 x 1.3 WiFi / Bluetooth Chip Antenna (CW324S) Engineering Specification DOCUMENT H2U38D1E1B0100 REV. NO. C PAGE 7 OF 11 7-2. 3D Efficiency Table Frequency(MHz) 2400 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484 2500 Efficiency(dB) -2.9 -2.8 -2.7 -2.7 -2.6 -2.6 -2.5 -2.5 -2.6 -2.5 -2.5 -2.4 -2.5 -2.5 -2.6 -2.7 Efficiency(%) 51.8 52.1 53.1 54.3 54.9 55.5 55.7 56.3 55.4 56.4 56.5 57.1 56.8 56.6 54.4 53.1 Peak Gain(dBi) 1.2 1.2 1.3 1.3 1.3 1.4 1.6 1.5 1.5 1.5 1.4 1.5 1.4 1.4 1.2 1.1 7-3. 3D Efficiency vs. Frequency ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIO…

Text truncated - open the document above for the full version.

Wuxi Bozhixin Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022-11-10 Subject; Request for Confidentiality FCC ID: 2A88MFP602 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Wuxi Bozhixin Technology Co., Ltd. Contact person: Layne Zhou

Report No.: AGC01040221002AP03 Page 1 of 4 EXTERNAL PHOTOS ALL VIEW OF EUT TOP VIEW OF EUT Report No.: AGC01040221002AP03 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC01040221002AP03 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC01040221002AP03 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report****************************************

FCC ID Label Location 20mm&15mm FCC ID: 2A88MFP602 Model name: FP602, R-POD

Report No.: AGC01040221002AP03 Page 1 of 3 INTERNAL PHOTOS OPEN VIEW OF EUT BATTERY VIEW OF EUT Report No.: AGC01040221002AP03 Page 2 of 3 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) Report No.: AGC01040221002AP03 Page 3 of 3 INTERNAL VIEW OF EUT (FIGURE 3) ANTENNA CLOSE-UP PHOTO-1 ****************************************End of Report**************************************** BT/ANT+ Antenna

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION Product Description Dynamic Running Pod Model Name FP602 Series Model R-POD FCC ID 2A88MFP602 2. EVALUATION METHOD According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. Where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 3. CALCULATION BLE: P t = -4.811dBm=0.33mW The value of the Maximum output power P t is referred to the test report of the CFR47 §15.247. The result for RF exposure evaluation SAR=(0.33mW /5mm) .[√2.402GHz)]=0.10<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. ANT+: P t =89.42dBuV/m(Peak)@3m= -5.78dBm=0.26mW The value of the Maximum output power P t is referred to the test report of the CFR47 §15.249. The result for RF exposure evaluation SAR=(0.26mW / 5mm).[√2.457GHz)]=0.08<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. 4. CONCLUSION The SAR evaluation is not required.

Report No.: AGC01040221002FE10 Page 1 of 33 FCC Test Report Report No.: AGC01040221002FE10 FCC ID : 2A88MFP602 PRODUCT DESIGNATION : Dynamic Running Pod BRAND NAME : N/A MODEL NAME : FP602, R-POD APPLICANT : Wuxi Bozhixin Technology Co., Ltd. DATE OF ISSUE : Nov. 08, 2022 STANDARD(S) : FCC Part 15 Subpart C §15.249 REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC01040221002FE10 Page 2 of 33 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Nov. 08, 2022 Valid Initial Release Report No.: AGC01040221002FE10 Page 3 of 33 TABLE OF CONTENTS 1. GENERAL INFORMATION .............................................................................................................................. 5 2. PRODUCT INFORMATION .............................................................................................................................. 6 2.1 PRODUCT TECHNICAL DESCRIPTION ................................................................................................ 6 2.2 TEST FREQUENCY LIST ........................................................................................................................ 6 2.3 RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................. 7 2.4 TEST METHODOLOGY .......................................................................................................................... 7 2.5 SPECIAL ACCESSORIES ....................................................................................................................... 7 2.6 EQUIPMENT MODIFICATIONS .............................................................................................................. 7 2.7 ANTENNA REQUIREMENT .................................................................................................................... 7 2.8 DUTY CYCLE .......................................................................................................................................... 8 3. TEST ENVIRONMENT ..................................................................................................................................... 9 3.1 ADDRESS OF THE TEST LABORATORY .............................................................................................. 9 3.2 TEST FACILITY ....................................................................................................................................... 9 3.3 ENVIRONMENTAL CONDITIONS......................................................................................................... 10 3.4 MEASUREMENT UNCERTAINTY ........................................................................................................ 10 3.5 LIST OF EQUIPMENTS USED .............................................................................................................. 11 4.SYSTEM TEST CONFIGURATION ................................................................................................................. 12 4.1 EUT CONFIGURATION ......................................................................................................................... 12 4.2 EUT EXERCISE ..................................................................................................................................... 12 4.3 CONFIGURATION OF TESTED SYSTEM ............................................................................................ 12 4.4 EQUIPMENT USED IN TESTED SYSTEM........................................................................................... 12 4.5 SUMMARY OF TEST RESULTS ........................................................................................................... 13 5. DESCRIPTION OF TEST MODES ................................................................................................................. 14 6. 20 DB BANDWIDTH ....................................................................................................................................... 15 6.1 MEASUREMENT PROCEDURE ........................................................................................................... 15 6.2 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) ............................................... 15 6.3 MEASUREMENT RESULTS.................................................................................................................. 16 7. RADIATED EMISSION ................................................................................................................................... 17 7.1 LIMITS OF RADIATED EMISSION TEST ............................................................................................. 17 7.2 MEASUREMENT PROCEDURE ........................................................................................................... 18 7.3 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) ............................................... 20 7.4 MEASUREMENT RESULT .................................................................................................................... 21 8. AC LINE CONDUCTED EMISSION TEST ..................................................................................................... 29 8.1 LIMITS OF LINE CONDUCTED EMISSION TEST ............................................................................... 29 8.2 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) ............................................... 29 Report No.: AGC01040221002FE10 Page 4 of 33 8.3 PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST .......................................... 30 8.4 FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST ........................................................ 30 8.5 MEASUREMENT RESULTS.................................................................................................................. 31 APPENDIX A: PHOTOGRAPHS OF TEST SETUP .............................................…

Text truncated - open the document above for the full version.

Report No.: AGC01040221002AP02 Page 1 of 3 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC01040221002AP02 Page 2 of 3 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TEST SETUP (BLE) Report No.: AGC01040221002AP02 Page 3 of 3 RF CONDUCTED TEST SETUP (ANT+) ****************************************End of Report*************************************