2A88P-1002Display and Range Extender for Wireless Cooking Thermometer

2022/11/29Start Cooking – Combustion Inc https://combustion.inc/pages/start1/8 Start Cooking 1. Charge the devices Charge the Predictive Thermometer (20 min) and the Display (1 hr). Use USB-C (cable included). Charging details 2. Link the devices • Turn on the display by pressing the Start/Stop button. • Turn on thermometer by removing it from the charger. Get started using your thermometer Display and Range Extender for Wireless Cooking Thermometer Display and Range Extender 2022/11/29Start Cooking – Combustion Inc https://combustion.inc/pages/start2/8 • Place thermometer next to display for a few seconds. When a temperature appears on-screen, that means they’re linked. (Note: you don’t need to repeat this process, the display remembers.) Linking details 3. Insert the thermometer Insert the Predictive Thermometer into the food. Be sure it’s at least as deep as the minimum insertion line (the three stripes halfway down). WARNING: Don’t measure things hotter than boiling! Keep the lower half below 212°F (100°C) at all times. Higher temps can cook the electronics, and the brainy part is down near the tip. It’s safe inside food because the water in the food keeps everything below boiling. Science! The top half of the thermometer is built for high temps up to 570°F (300°C). Avoid direct flame! Flare-ups can easily exceed temperature limits. The ceramic handle will provide brief protection, but not for long. 2022/11/29Start Cooking – Combustion Inc https://combustion.inc/pages/start3/8 Be sure the minimum insertion line is inside the food. 4. Set target temperature Press m- and s+ buttons to set the cooking to temperature for your desired doneness. Press the start button. Put the food in your oven, smoker, grill, frying pan... you get the idea. 2022/11/29Start Cooking – Combustion Inc https://combustion.inc/pages/start4/8 Predictive cooking details What about sous vide? 5. Relax The display will show progress by indicating % of cooking completed. About a third of the way in, a countdown will appear: time to cook. That’s the magic number! When that number hits 00:00, an alarm will sound to let you know your food is ready. What about low and slow? 6. Clean up and store Wipe your Predictive Thermometer with a soapy sponge. Dry with a dishcloth. No soaking! It’s highly water-resistant but not 100% waterproof. 2022/11/29Start Cooking – Combustion Inc https://combustion.inc/pages/start5/8 It’s safe to use an abrasive cleaner (we use steel wool) to scrub the ceramic handle. Store your clean and dry thermometer in its charger. It will go into low-power standby mode and will hold a usable charge for about 30 days. Use USB-C to recharge (20 min). Wipe the display with a damp cloth. Use mild cleaning products if necessary, nothing scratchy. Friendly Warnings RESPECT THE MIN-LINE Always insert to at least the minimum insertion line. BOILING IS THE LIMIT You can check a simmer, but keep the pointy end out of things that are much above 212ºF (100ºC). No candy, boiling oil, molten gold, etc. WATER-RESISTANT Avoid fully immersing your thermometer. It's not waterproof, just extremely water-resistant. Other modes Advanced settings 2022/11/29Start Cooking – Combustion Inc https://combustion.inc/pages/start6/8 Support Getting started guide FAQ Returns & exchanges Get help Connect Ask us a question on Twitter Follow us on Instagram Send us an email Mobile Apps Coming soon More watchouts Service & support 2022/11/29Start Cooking – Combustion Inc https://combustion.inc/pages/start7/8 Policies Terms of Service Privacy Policy Shipping Policy Refund Policy Warranty More Media Kit Developers Stay in touch Only good things, we promise. Subscribe this week and be entered to win a $200 store credit. Email 2022/11/29Start Cooking – Combustion Inc https://combustion.inc/pages/start8/8 © 2022 Combustion Inc Send Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence- exempt RSS(s) and Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC& IC Radiation Exposure St…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Combustion LLC (DBA Combustion Inc) Address 6224 50th Ave NESeattle, 98115, Washington, United States Grantee Code 2A88P FCC ID 2A88P-1002 Authorized Contact Name Brian McCracken Contact Email [email protected] Contact Phone (509) 859-4222 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Combustion LLC (DBA Combustion Inc) (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Combustion LLC (DBA Combustion Inc) (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 11/22/2022 Print Name: Brian McCracken Title: Project Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 2023/02/13 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Combustion LLC (DBA Combustion Inc) Company Name: Combustion LLC (DBA Combustion Inc) Grantee Code: 2A88P Contact Name: Brian McCracken Contact Name: Brian McCracken Address: 6224 50th Ave NE Address: 6224 50th Ave NE City/Province/Zip: Seattle/ Washington/ 98115 City/Province/Zip: Seattle/ Washington/ 98115 Telephone: (509) 859-4222 Telephone: (509) 859-4222Fax: - Fax: -Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: 2A88P-1002 ATTN: Director of Certification: We, Combustion LLC (DBA Combustion Inc) and Combustion LLC (DBA Combustion Inc) understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, Combustion LLC (DBA Combustion Inc) and Combustion LLC (DBA Combustion Inc) acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant Combustion LLC (DBA Combustion Inc) U.S. designated agent Combustion LLC (DBA Combustion Inc) Name (Printed): Brian McCracken Name (Printed): Brian McCracken Title: Project Manager Title: Project Manager Signature: Signature: FRN: 0033054776

Combustion LLC (DBA Combustion Inc) Authority letter FCC Date: 11/22/2022 TO:Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2A88P-1002 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Combustion LLC (DBA Combustion Inc). This authorization is valid until further written notice from the applicant. Name (Printed) : Brian McCrackenTitle: Project Manager Signature: On behalf of Company: Combustion LLC (DBA Combustion Inc)

Combustion LLC (DBA Combustion Inc) Confidential letter FCC To:SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From:Combustion LLC (DBA Combustion Inc) 6224 50th Ave NE Seattle , Washington , 98115 , United States Regarding:Confidentiality Request regarding application for FCC ID : 2A88P-1002 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Name(Printed): Brian McCrackenTitle: Project Manager Signature: On behalf of Company: Combustion LLC (DBA Combustion Inc)

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 1 of 4 Appendix External Photos for GZCR2210001299AT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 4 of 4

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 1 of 4 Appendix Internal Photos for GZCR2210001299AT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 4 of 4

Slide 1 Combustion Inc. Kitchen Timer: Antenna Specification VersionDateDescriptionReport 111-27-2022 Description of BLE Antenna ConfigurationJCM-EM: Joseph C. Modro 22-1-2023 Radiation Patterns, Peak GainJCM-EM 32-7-2023 Typo corrected: peak gain (Slide 4)JCM-EM Slide 2 Timer: Version 1 Build: External View •PCB trace antenna [1] shown in cross-section [2] 1. Antenna IFA type 2. Device cross-section cut away Slide 3 Timer: Internal View of Antenna •PCB has 4 copper layers with total thickness of 1.55mm Antenna Trace (TOP Layer) Antenna Feed Point Antenna Matching Components Ground-plane Layer (TOP Layer) Slide 4 Summary of Antenna Properties •Antenna Type: Meandered Inverted-F Antenna (IFA) trace on PCB, with matching components tuned for optimum efficiency •Peak Antenna Gain: 0.1932dBi •Frequency Range: 2.402GHz –2.48GHz [BLE band] •Antenna Dimensions: ref. previous slide [3]: PCB trace area 4.7mm X 14.5mm Slide 5 Radiation Pattern 3D: Peak Gain is at 2.44GHz: 0.1932dBi Slide 6 Radiation Pattern 2D: Gain vs Theta @ Phi=90 deg. Slide 7 Radiation Pattern 2D: Gain vs. Phi @ Theta=90 deg.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR221000129903 Page: 1 of 8 FCC ID: 2A88P-1002 Ricky Liu Manager RF EXPOSURE EVALUATION REPORT Application No.: GZCR2210001299AT Applicant: Combustion LLC (DBA Combustion Inc) Address of Applicant: 6224 50th Ave NE Seattle WA 98115 USA Manufacturer: JDI Electronics Factory Address of Manufacturer: Sima Industrial Zone, Sima Village, Chang Ping Town, Dongguan 523570, Guangdong, China Factory: JDI Electronics Factory Address of Factory: Sima Industrial Zone, Sima Village, Chang Ping Town, Dongguan 523570, Guangdong, China Equipment Under Test (EUT): EUT Name: Display and Range Extender for Wireless Cooking Thermometer Model No.: Display and Range Extender Standard(s) : KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2022-10-17 Date of Evaluation: 2022-10-21 to 2022-11-09 Date of Issue: 2023-01-09 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR221000129903 Page: 2 of 8 Revision Record Version Report No. Date Remark 01 GZCR221000129903 2023-01-09 Original Authoriz ed for issue by: Michael Huang/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR221000129903 Page: 3 of 8 2 Evaluation Summary Item Standard Method Requirement Result RF Exposure KDB447498D01 General RF Exposure Guidance v06 KDB447498D01 General RF Exposure Guidance v06 KDB447498D01 General RF Exposure Guidance v06 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR221000129903 Page: 4 of 8 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Evaluation Summary ................................................................................................................................ 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 5 4.1 Details of E.U.T. ................................................................................................................................. 5 4.2 Evaluating Location ............................................................................................................................ 5 4.3 Facility ................................................................................................................................................ 6 4.4 Deviation from Standards ................................................................................................................... 6 4.5 Abnormalities from Standard Conditions ........................................................................................... 6 5 Technical Requirements Specification ................................................................................................... 7 5.1 RF Exposure Evaluation .................................................................................................................... 7 5.1.1 Limit & Test Method ....................................................................................................................... 7 5.1.2 Conclusion ..................................................................................................................................... 7 6 EUT Constructional Details (EUT Photos) ............................................................................................. 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR221000129903 Page: 5 of 8 4 General Information 4.1 Details of E.U.T. Power supply: DC 3.7V powered by Rechargeable Battery as below: Model: LP503043 Rated: DC 3.7 V, 2.59Wh, 700 mAh Cable(s): Type C ports. Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: PCB Trace Antenna Antenna Gain: 0.1932 dBi 4.2 Evaluating Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555 Fax: +86 20 82075059 No tests were sub-contracted. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR221000129903 Page: 6 of 8 4.3 Facility The facility is recognized, certified, or accredited by the following organizations: ● ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the Australian/New Zealand Regulatory Compliance Mark (RCM). ● SGS UK(Certificate No.: 32), SGS-TUV SAARLAND and SGS-FIMKO Have approved SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory as a supplier of EMC TESTING SERVICES and SAFETY TESTING SERVICES. ● FCC Recognized Accredited Test Firm(Registration No.: 486818) SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been accredited and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Designation Number: CN5016, Test Firm Registration Number: 486818. ● ISED (Registration No.: 4620B, CAB identifier: CN0052) SGS-CSTC Standards Technical Services Co., Ltd., has been registered by Innovation Science and Economic Devel…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR221000129902 Page: 1 of 54 FCC ID: 2A88P-1002 Ricky Liu Manager TEST REPORT Application No.: GZCR2210001299AT Applicant:Combustion LLC (DBA Combustion Inc) Address of Applicant:6224 50th Ave NE Seattle WA 98115 USA Manufacturer:JDI Electronics Factory Address of Manufacturer:Sima Industrial Zone, Sima Village, Chang Ping Town, Dongguan 523570, Guangdong, China Factory:JDI Electronics Factory Address of Factory:Sima Industrial Zone, Sima Village, Chang Ping Town, Dongguan 523570, Guangdong, China Equipment Under Test (EUT): EUT Name:Display and Range Extender for Wireless Cooking Thermometer Model No.: Display and Range Extender Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2022-10-17 Date of Test: 2022-10-21 to 2022-11-09 Date of Issue: 2023-01-09 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR221000129902 Page: 2 of 54 Revision Record VersionReport No.DateRemark 01GZCR2210001299022023-01-09Original Authorized for issue by: Michael Huang/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR221000129902 Page: 3 of 54 2Test Summary Radio Spectrum Technical Requirement ItemStandardMethodRequirementResult Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part ItemStandardMethodRequirementResult Conducted Emissions at AC Power Line (150kHz-30MHz) ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR221000129902 Page: 4 of 54 3Contents Page 1Cover Page...............................................................................................................................................1 2Test Summary..........................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................6 4.1Details of E.U.T.................................................................................................................................6 4.2Description of Support Units..............................................................................................................6 4.3Measurement Uncertainty.................................................................................................................7 4.4Test Location.....................................................................................................................................7 4.5Test Facility.......................................................................................................................................8 4.6Deviation from Standards..................................................................................................................8 4.7Abnormalities from Standard Conditions...........................................................................................8 5Equipment List.........................................................................................................................................9 6Radio Spectrum Technical Requirement.............................................................................................12 6.1Antenna Requirement......................................................................................................................12 6.1.1Test Requirement:.......................................................................................................................12 6.1.2Conclusion..................................................................................................................................12 7Radio Spectrum Matter Test Results...................................................................................................13 7.1Conducted Emissions at AC Power Line (150kHz-30MHz).............................................................13 7.1.1E.U.T. Operation.........................................................................................................................13 7.1.2Test Mode Description................................................................................................................13 7.1.3Test Setup Diagram.................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 1 of 3 Appendix Test Setup Photo for GZCR2210001299AT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 2 of 3 Test Setup Photo Conducted Emissions at AC Power Line (150kHz-30MHz) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 3 of 3 Radiated Emissions which fall in the restricted bands & Radiated Spurious Emissions