2A8BD-61003LED Track light

2 2 11 3 Device Settings Download and Install App Recommended Testing Distance Add devices 0°-90° For iPhone (iPad works as well, however, interface needs to be improved), search “AiScene” from APP Store. Download and Install the APP, and open it. (Android version will be released later) For clothes, recommended a testing distance of 0.5~2.0 meters from clothes to the lens. For other commodities, adjust the distance according to the size. Larger size commodities can be farther and vice versa. To ensure the best lighting, please align track light so that the center beam spot on the center of commodities Please follow the sequence of installation step by step,Switch off the electricity before commencing installation Step 1: Tap “Add new device” or “+” on the top right of this page to view all the lights within Bluetooth reach. Step 2: Tap ”+” behind the device name, The light will be flashing 5 times. Choose a light and rename the device, such as light1. Step 3: Tap “Confirm” to finish setting. The light will flash five times to indicate the light that you just added. Note: A) Once connected, it will get into the device settings page directly. B) Device colour sensing defaulted active for built-in sensor track light. If software update pops up, please update the software first. On the Settings page, tap top left corner to return to Devices page. Tap settings icon on the top right corner of light icon on the Devices page can also get into Settings page. There are always new challenges facing businesses as the retail industry rapidly changes due to technological evolution. According to study, "Personalized shopping experience" and "Ability to preview products in-person before purchase commitment" is the top reasons why shoppers still prefer brick-and-mortar. AiSCENE™ Retail platform gives you the tools you need to overcome these challenges and get started with insight business opportunities. Instructions 4 AIScene-Track Light Instructions 0°-360° 360° These AiSCENE™ luminaires is part of the product portfolio of the AiSCENE™ Retail platform which stands for the design of smart, automation and autonomous light color enhancement & control solutions based on Artificial Intelligent(AI) and Internet of Things in retail lighting. These AiSCENE™ Retail products equipped with sensors and powered by its brain—an AI deep learning microcontroller, they'll revolutionize retail lighting industrial. 1 1 1 3 2 2 2 61003 175mm Φ90mm 0°-360° 0°-90° Rev: A1 All rights reserved. The information in this document is subject to change without notice. Device Settings Overview Light Setting Light Setting: Take a photo Light Setting: Customization Remove a device from APP Questions & Feedback? Ongoing & Further Development Includes Energy Saving Setting Light On/Off：Turn on light or turn off light by APP. Light Setting：Use APP to set the light by using a photo, or taping into ”Customization” manually. Device Colour Sensing：When turn on the light by APP or by switch with “Device colour sensing” on, or turn “Device colour sensing” from off to on, the colour sensor on the light will detect the commodity and output light according the commodity detected. If this function is set as off by user, the light will output the light last set when turn on the light. This item is set as on by default in factory. Energy saving setting：When it is set as on and no customers are detected around the light, the light will be turned down to save energy. This item is set as off by default in factory. Software: The software on the light, tap to update it to the latest version. Rename: Rename the light. Factory reset：Reset the light to factory setting, and the light will still be kept on APP. To get into light setting page, tap item “Light Setting” on device Settings page. Or, tap the light icon to get into light setting page. OR There are three ways to set the light. Device Colour Sensing On (This is default, but once set light by the App, it will be disabled.) Use photos Customization Take a photo of target commodity or choose a photo from albums. Draw a box on the target colour or tap on the target colour, and the light will be changed accordingly. Usually drawing a box is suitable for large area of a colour or mixed colour, and taping is more suitable for choosing one kind of small area colour from mixed colours. The brightness can also be dimmed by dragging the slider below. If return, the light will turn back to previous setting. Tap “Done”, keep the setting and “Device colour sensing” will be off automatically. Tap “Customization” into “Customization” page. User can tune the colour, colour temperature, saturation and brightness of the light. If return, the light will turn back to previous setting. Tap “Done”, keep the setting you choose. OR If customer(s) detected by the built-in sensor on the light, turn the brightness to 100%. If no customer(s) detected, dim the light to the pre-set brightness level after a choosen time. Note: This function is off by default. To activate this function, follow the instructions. Auto-dim(min): how many minutes the light starts to dim after customers leave. The range is from 1 minute to 60 minutes. Brightness without customers: what percentage of brightness to illuminate at the standby status. The range is from 0%-100%. Tap ”Confirm” to complete the setting. Return to abandon. Tap on the light icon and hold, and a menu pops up. Choose “Delete” to remove a light from your APP, and choose “Cancel” to abandon. Note: the light will keep the settings. Other users can control it as normal one. Ongoing development includes: Don’t have to dim the light while built-in sensor is sensing commodity. More details about commodites will be recognized. Don’t have to put target commodity in light beam center accurately. We use a deep learning model to find out the target commodity. Further development by customization includes: Heatmap: detect how many people enter the area around the light during a period based on a…

Text truncated - open the document above for the full version.

FCC Label and Location 50mmX50mm Proposed Label Location on EUT Label location FCC Label

FCC ID: 2A8BD-61003 RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. FCC ID: 2A8BD-61003 Test Result of RF Exposure Evaluation BT EDR mode Channel Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 2441MHz 8.63 7.29 0.0025 1.0 PASS BLE mode Channel Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm2) Result 2480MHz 5.34 3.42 0.0012 1.0 PASS Antenna gain: 2.4dBi The max power density is less than MPE exempt limit, so it is compliance.

Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 1 of 19 Appendix for 15.247 1. Bandwidth 1.1 OBW 1.1.1 Test Result Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result GFSK SISO 2402 1 1.014 Pass 2440 1 1.016 Pass 2480 1 1.015 Pass Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 19 1.1.2 Test Graph GFSK_LCH_2402MHz_Ant1_NTNV GFSK_MCH_2440MHz_Ant1_NTNV Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 19 GFSK_HCH_2480MHz_Ant1_NTNV Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 19 1.2 6dB BW 1.2.1 Test Result Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit GFSK SISO 2402 1 0.642 >=0.5 Pass 2440 1 0.646 >=0.5 Pass 2480 1 0.641 >=0.5 Pass Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 5 of 19 1.2.2 Test Graph GFSK_LCH_2402MHz_Ant1_NTNV GFSK_MCH_2440MHz_Ant1_NTNV Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 6 of 19 GFSK_HCH_2480MHz_Ant1_NTNV Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 7 of 19 2. Maximum Conducted Output Power 2.1 Test Result Mode TX Type Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Verdict ANT1 Limit GFSK SISO 2402 4.61 <=30 Pass 2440 5.17 <=30 Pass 2480 5.34 <=30 Pass Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 8 of 19 2.2 Test Graph GFSK_LCH_2402MHz_Ant1_NTNV GFSK_MCH_2440MHz_Ant1_NTNV Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 9 of 19 GFSK_HCH_2480MHz_Ant1_NTNV Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 10 of 19 3. Maximum Power Spectral Density 3.1 Test Result Mode TX Type Frequency (MHz) Maximum PSD (dBm/3kHz) Verdict ANT1 Limit GFSK SISO 2402 -11.30 <=8 Pass 2440 -9.80 <=8 Pass 2480 -8.94 <=8 Pass Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 11 of 19 3.2 Test Graph GFSK_LCH_2402MHz_Ant1_NTNV GFSK_MCH_2440MHz_Ant1_NTNV Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 12 of 19 GFSK_HCH_2480MHz_Ant1_NTNV Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 13 of 19 4. Unwanted Emissions In Non-restricted Frequency Bands 4.1 Ref 4.1.1 Test Result Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) GFSK SISO 2402 1 4.19 2440 1 4.81 2480 1 4.92 Note1: Refer to FCC Part 15.247 (d) and ANSI C63.10-2013, the channel contains the maximum PSD level was used to establish the reference level. Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 14 of 19 4.1.2 Test Graph GFSK_LCH_2402MHz_Ant1_NTNV GFSK_MCH_2440MHz_Ant1_NTNV Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 15 of 19 GFSK_HCH_2480MHz_Ant1_N…

Text truncated - open the document above for the full version.

Global United Technology Services Co., Ltd. Report No.: GTS202208000116F02 Authorized Signature: Robinson Luo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 33 TEST REPORT Applicant: Kinglumi Co., Ltd Address of Applicant: Bldg 3, Nangang Third Industrial Zone, Tangtou, Shiyan Town, Baoan District, Shenzhen City, China Manufacturer/Factory: Kinglumi Co., Ltd Address of Manufacturer/Factory: Bldg 3, Nangang Third Industrial Zone, Tangtou, Shiyan Town, Baoan District, Shenzhen City, China Equipment Under Test (EUT) Product Name: LED Track light Model No.: 61003, 62003, 63003 FCC ID: 2A8BD-61003 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: August 18, 2022 Date of Test: August 19, 2022-October 31, 2022 Date of report issued: November 01, 2022 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 33 2 Version Version No. Date Description 00 November 01, 2022 Original Prepared By: Date: November 01, 2022 Project Engineer Check By: Date: November 01, 2022 Reviewer Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 33 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 7 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 7 5.5 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................... 7 5.6 TEST FACILITY .................................................................................................................................... 7 5.7 TEST LOCATION ................................................................................................................................. 7 5.8 ADDITIONAL INSTRUCTIONS ................................................................................................................. 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA .................................................................................... 10 7.1 ANTENNA REQUIREMENT ................................................................................................................... 10 7.2 CONDUCTED EMISSIONS ................................................................................................................... 11 7.3 CONDUCTED OUTPUT POWER ........................................................................................................... 14 7.4 CHANNEL BANDWIDTH ...................................................................................................................... 15 7.5 POWER SPECTRAL DENSITY ............................................................................................................. 16 7.6 SPURIOUS EMISSION IN NON-RESTRICTED & RESTRICTED BANDS ....................................................... 17 7.6.1 Conducted Emission Method ..................................................................................................... 17 7.6.2 Radiated Emission Method ........................................................................................................ 18 8 TEST SETUP PHOTO ............................................................................................................................ 33 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 33 Report No.: GTS202208000116F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 33 4 Test Summary Test Item Section in CFR 47 Result Antenna requirement 15.203/15.247 (c) Pass AC Power Line Conducted Emission 15.207 Pass Conducted Output Power 15.247 (b)(3) Pass Channel Bandwidt…

Text truncated - open the document above for the full version.

Specification （ FPC+CABLE ） Customer name： Jin Liuming Project name： 35W-AL Material No： 1.05.10.0006 Material name： MAIN-ASM Sample material： FPC+CABLE Date： 2022.11.12 Number： HT-AT-SP-0001 MakeRevisedApproved Customer Signature And Approval ContractorExamineApproved Zhejiang wenzhou haitong communication electronics Content 1 、 Cover 2 、 Conten 3 、 Engineering Drawing 4 、 Full-size Measurement Report 5 、 CPK 6 、 Schematic&Electrical Properties Performance and Test Report 7 、 Manufacturing Process Flow Chart 8 、 Reliability Test Report 9 、 ROHS limited material composition questionnaire &SGS Report 10 、 Package specification H T 1 8 8 8 - W I F I - A 1 H T 1 8 8 8 - I C 1 - A W I F I _ C a b 1 Ø 1 . 1 3 * 5 5 M M B l a c k 1 8 / 1 2 . 5 , E D ， P I Z h e j i a n g H a i t o n g c o m m u n i c a t i o n s e l e c t r o n i c L i m i t e d b y S h a r e L t d . C u s t o m e r I t e m N o ： H T I t e m N o ： R E V ： D R W I N G N O ： S C A L E ： U N I T ： P A G E ： S I Z E ： D W N ： C H K D ： A P P D ： P R O D U C T N A M E ： D E S C R I P T I O N N O . D E S I G E D A T E P R O J E C T N A M E ： T H I S D O C U M E N T I S P R O P E R T Y O F H A I T O N G P R E C C I S I O N T E C H N O L O G Y . L T I S C A N N O T B E C O P I E D , U P D A T E D A N D T A K E N O U T C O M P A N Y , U N L E S S B E A L L O W E D . N O T O L E R A N C E N O T E D X . X ± 0 . 1 5 ± 0 . 1 0 H O L E D I A T W O P L A C E O N E P L S C E A N G U L A R D I M ± 1 . 0 ° X . ° ± 0 . 1 0 X . X X X . X 浙 江 海 通 通 讯 电 子 股 份 有 限 公 司 Z Y Y m m A 4 H T 1 8 8 8 _ W I F I _ a n t e n n a _ A S S Y H T 1 8 8 8 - 3 5 W - A L B . 1 . 0 5 . L . 0 1 1 7 1 . 0 5 . 1 0 . 0 0 0 6 Z Y Y F U L L A A O f f i c i a l d r a w i n g f i l e 2 0 2 2 . 0 7 . 0 1 W I F I _ F P C Product Dimension Inspection Report The project name 35W-AL Drawing specification/ver sion 35W-AL/A Mold number/cavity number / Measuring time 2022.11.11 The sample status Mass production, Sample material/process FPC+CABLE Temperature, humidity 25C° 55% Measuring the signature Zhang ling detection Conclusion: There are 6 key dimensions ≤80% in the drawing, 0 in early warning and 0 in > in 100%. Signature of project manager Zhu Shuang There are 7 pieces of general size ≤80% on the drawing, 0 pieces of early warning, and 0 pieces of > 100%. Qc signatureCao Jilei The drawings specificationsTest resultsTesting informationProcessing opinion Mea sur ing too l Size number Size of nature Basic dimens ions The tolera nce The tolera nce Sample 1 Sample2Sample3 Sample4Sample5 Tolerance range determination Maximum deviation reference Comments from supplier quality control/pr oject Customer comments ≤50%≤80% warni ng ＞ 100% The worst data Tolerance percentag e Exceed the tolerance band 1 ★ 44.30 -0.20 0.20 44.29 44.26 44.26 44.28 44.26 √ 44.26 20% C 2 ★ 22.85 -0.20 0.20 22.83 22.84 22.84 22.82 22.84 √ 22.82 16% C 3 409.00 -2.00 2.00 409.60 408.90 408.70 409.40 409.10 √ 409.60 30% C 4 1.13 -0.05 0.05 1.13 1.13 1.12 1.13 1.14 √ 1.14 20% C 5 6 7 8 Remark: Code description of measuring tools: V: cubic C: quadratic BG: block gauge PG: needle gauge DG: depth gauge PG: needle gauge P: projector DC: caliper RG: R gauge M: micrometer HG: height TC: true roundness meter E: tool microscope F: plug gauge DT: lever table DI: depth table ★ : key CPK Report The product name MAIN-ASM supplier Zhejiang haitong communication electronics co. LTD The customer material no. 1.05.10.0006 That confirmZhang ling Die no. / Inch/mm MM Acupuncture point no. / The name of the material PI version A The date of 2022.11.11 Size of the serial number 12 Nominal size 44.3022.85 Is the tolerance 0.200.20 Minus tolerance -0.20-0.20 Specification limit 44.5023.05 Specification limit 44.1022.65 144.33 22.88 244.33 22.88 344.33 22.88 444.37 22.92 544.34 22.89 644.33 22.89 744.35 22.90 844.36 22.91 944.27 22.82 1044.33 22.88 1144.26 22.81 1244.31 22.86 1344.33 22.88 1444.34 22.89 1544.28 22.83 1644.30 22.85 1744.29 22.84 1844.35 22.90 1944.27 22.82 2044.26 22.81 2144.24 22.79 2244.23 22.78 2344.27 22.82 2444.34 22.89 2544.23 22.78 2644.24 22.79 2744.28 22.82 2844.27 22.82 2944.29 22.81 3044.34 22.89 3144.27 22.81 3244.35 22.90 MAX.44.3722.92 MIN.44.2322.78 AVERAGE44.3022.85 STDEV0.040.04 CP1.601.54 Cpk 1.571.53 Measuring toolquadraticquadratic Review: Cao Jilei Zhang ling2022.11.12 Customer L enovo Flow chat T ony Orig. Date:13-Dec-06 Part name MAIN-ASM MakeRenKankanProduction date 2022/11/11 Material No 1.05.10.0006ConfirmLinHaifengConfirmation date 2022/11/11 INSPECT PER LOT STOCK RECEIVE RAW MATERIAL PACKING SLIP RECEIVING INSPECTION SHEET FAIL PASS Weld PASS inspection/Packaging IPQC/FQC REJECT THIS LOT FAIL FQC FAIL STOCK PASS PASS PASS OQC Shipmen PASS sorting, maintenance, scrap FAIL PER CP，SOP Process card Test sorting, maintenance, scrap sorting, maintenance, scrap （Constant temperature and humidity） Form No：HT-FM-PZ112 (Product name) MAIN-ASM (Part number ) 1.05.10.0006 (laboratory temperature) 25 °C (Report No.) ER20221108001 ( Date) 2022/11/8 (documentation)(laboratory humidity) 66% (Client Dept.) RenKankan (Experiment reasons) ■ （ new product ） □ （ ECN later ） □ (product to be out spec) □ (daily Experiment) （Housing tool cavity) / (Metal tool) / (Quantity) 1PCS (Description) After the experiment, the appearance of the product was tested to be free of oxidation and glue opening (Plastic material) FPC+CABL E (Metal material) / (Order) (Experiment project) （ Samples Qty.） (Experiment equipment) (Experiment method)(Experiment note of product)(Experiment result) (Conclude) 1 （ Constant temperature and humidity） 1PCS （ High and low temperature test chamber） （Put the sample into a constant temperature and humidity box with the temperature of 45±3c and relative humidity of 90 ~ 95% for 48h, and then conduct the test after recovering for 2h at normal temperature.） （ After the experiment, the appearance of the product was tested to be free of oxidation and glue opening） （ After the test, the product appearanc…

Text truncated - open the document above for the full version.

Radiated Emission Conducted Emission