2A8EJ-HLA-2301AUTO Laminator

1 AUTO LAMITOR Instruction Manual MODEL NO : HLA-2301 2 About the warning mark The following marks are added to the explanations of things that you should never do or should be careful about in this manual and the main body. Be sure to read these marks and follow the instructions. Warning label for safety In order to indicate the magnitude of danger in each part of this machine, warnings are given in the following two levels. ＷＡＲＮＩＮＧ ・・・ When it is assumed that the user may be killed or seriously injured if mishandled. ＣＡＵＴＩＯＮ ・・・ When it is expected that the user will be seriously injured or only property damage will occur if the product is handled improperly. General cautions and warnings We will inform you of general cautions and warnings that are not specified. Caution for electric shock Used for notification to warn of the possibility of electric shock under specific conditions. Caution for entrainment Used for notification to warn of the possibility of electric shock under specific conditions. Amputation Caution This is used to notify you of possible obstacles such as amputation of a finger with a sharp rotating object. High temperature caution Used to notify the possibility of damage due to high temperature under specific conditions. General prohibitions We will inform you of general prohibitions that are not specified. Forcibly unplug the power plug from the power outlet Unplug the power plug from the power outlet in case of a dangerous situation such as a malfunction. 3 Warning (about installation location) Do not install in such a place. When installing this machine, avoid the following places as it may cause safety problems such as fire, electric shock, and tipping, and may also cause a malfunction. Warning (about power supply / ground) １. . When using, use the correct power supply voltage・・・ Be sure to take the power supply from AC100 to 240V. Changing the voltage may cause electric shock, fire, and malfunction. For safety use, please prepare a dedicated outlet. * The power plug of this unit is a 3-pin power plug. ２. Please allow enough capacity Make sure there is enough room in the capacity (ampere) of the outlet to be connected. If there is not enough capacity, it may cause malfunction or fire. Never use octopus electrical connection. ３. Connect the ground wire Be sure to connect the ground wire to prevent danger in case of emergency and to prevent troubles from malfunction, electric shock, power supply noise, and static electricity. ４. Please take good care of the power cable Do not place heavy objects on it, pinch it, pull it, or bring it close to heating appliances. If the power cable is damaged, it may cause a fire, electric shock, or malfunction. Also, do not modify cables or plugs. Warning (general precautions) Observe the following precautions for safe operation and maintenance of this machine. 1. . About clothes at work Please wear clothes suitable for the work of this machine. • Avoid ties, necklaces, and hanging accessories. • Avoid loose clothing. If it gets caught, immediately turn off the power switch (○) or disconnect the power plug. Places exposed to direct sunlight Near the air conditioner outlet Extremely hot places (including near fire, such as heat appliances) Extremely cold place Places where the floor is not strong Places where the floor is not horizontal Places where there is a lot of vibration Extremely high or low humidity Dusty place 4 • Be careful not to pull your hair in. ２. When operating this machine • Be sure to close the cover when operating the machine. • Do not splash water on the machine or operate it with wet hands. • Do not leave the machine while operating it. ３. When an abnormality occurs in this machine • If a malfunction or unsafe condition occurs, immediately turn off the power switch (○), disconnect the power plug, and contact the maintenance company or your dealer. Do not disassemble, modify or repair by yourself. • Service and maintenance are always performed by qualified service personnel, observing the necessary precautions. ４. Others Never do the following as it may cause damage to the machine, death, serious injury, electric shock, fire, etc. · Do not use for any purpose other than the intended purpose of this machine. · Do not place heavy objects on the machine or subject it to shocks. · Be sure to unplug the power plug when moving the unit. · Be sure to unplug the power plug when moving the unit. · Please note that handling of dangerous materials or incorrect operation may cause smoke. · Be careful not to drop metal objects such as clips or staples inside the machine. · Never remove the fixed cover or safety switch. · Never modify this unit. · Use outside Japan is prohibited. There is a possibility of failure or fire due to the power supply voltage. · Never remove the warning label attached to the inside of the machine. · Be sure to use our HKK exclusive film. · Do not do anything else that is not described in the "Instruction Manual" of this manual. Caution (for paper that cannot be laminated) Do not laminate the following: · Securities and banknotes · Those with metal parts such as hochikisu · Ignition, easily meltable in heat (PVC, polyethylene, etc.) · Important things such as only one sheet · Thickness of 0.5 mm or more including film · Items that change color or deteriorate due to heat, such as thermal paper and pictures drawn with crayons · Those containing a lot of water · Things other than paper · Things that are not annoying, such as curves and wrinkles Attention (about care) Be sure to remove the power plug before cleaning the machine. Also, the inside of the machine may be extremely hot, so turn off the power (○) before cleaning, and wait for a while. Wipe off any dirt with a soft cloth. If it is very dirty, wipe it off with a soft cloth dampened with a small amount of water or a neutral detergent. After using a neutral detergent, be sure to wipe it off with a soft cloth soaked in water only. 5 Attention (about t…

Text truncated - open the document above for the full version.

Kalbas Limited Ga-Dong-702-1, 702-2, 703, Incheon Techpia bldg., 17, Geobuk-ro, Seo-gu, Incheon, South Korea 22793 Date: 09/15/2022 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Letter of Authorization We, the undersigned, hereby authorize Geunki Son of DT&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: 2A8EJ-HLA-2301 including signing of all documents relating to these matters. Any and all acts carried out by Geunki Son of DT&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Kalbas Limited. “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Contact Name: Seok-Kyun Jung Title: Director

Kalbas Limited Ga-Dong-702-1, 702-2, 703, Incheon Techpia bldg., 17, Geobuk-ro, Seo-gu, Incheon, South Korea 22793 Date: 09/15/2022 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Request of Confidentiality FCC ID: 2A8EJ-HLA-2301 To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Kalbas Limited. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give Kalbas Limited. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Schematics 3 Part Lists 4 Operation Description 5 NA SHORT-TERM 6 Internal Photos 7 External Photos 8 Test-Setup Photos 9 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Please note that we request that the internal photo are kept confidential permanently since the component placement is a trade secret that is owned by Insight Sip. This information is not available to the public since the module is over-molded with an epoxy mold compound that is difficult to remove. The components are not sold under NDA as this is not necessary to achieve the level of protection that we consider necessary. Sincerely, Contact Name: Seok-Kyun Jung Title: Director

FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. View 1 FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. View 2 FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. View 3

Label Laminator HLA - 2301 AC100 - 240V 50/60Hz 1200W 5 - 12A 170 - 270 ° F 80 - 130 ° C 5A Made in korea M/C No. HISAGO CO., Ltd. FCC ID : 2A8EJ-HLA-2301

FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. View 1 FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. View 2 FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. View 3 FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. View 4 FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. View 5

FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. View 6 FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. View 7 FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. View 8 FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. View 9 FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. View 10 <NFC Module> FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. View 11 <NFC Antenna>

Report No.: DRTFCC2209-0151 FCC ID: 2A8EJ-HLA-2301 This test report is prohibited to copy or reissue in whole or in part without the approval of DT&C Co., Ltd. TRF-RF-203(09)210316 Pages: 2 / 18 Test Report Version Test Report No. Date Description Revised by Reviewed by DRTFCC2209-0151 Sep. 15, 2022 Initial issue JaeHyeok Bang JaeJin Lee Report No.: DRTFCC2209-0151 FCC ID: 2A8EJ-HLA-2301 This test report is prohibited to copy or reissue in whole or in part without the approval of DT&C Co., Ltd. TRF-RF-203(09)210316 Pages: 3 / 18 CONTENTS 1. General Information .................................................................... 4 1.1. Description of EUT .................................................................. 4 1.2. Declaration by the applicant / manufacturer ........................... 4 1.3. Testing Laboratory ................................................................... 5 1.4. Testing Environment ................................................................ 5 1.5. Measurement Uncertainty ....................................................... 5 1.6. Test Equipment List ................................................................. 6 2. Test Methodology ........................................................................ 7 2.1. EUT Configuration ................................................................... 7 2.2. EUT Exercise ........................................................................... 7 2.3. General Test Procedures......................................................... 7 2.4. Description of Test Mode ......................................................... 7 2.5. Tested frequency ..................................................................... 7 3. Antenna Requirements ............................................................... 8 4. Summary of Test Result ............................................................. 9 5. Test Result ................................................................................. 10 5.1. 20dB bandwidth ................................................................... 10 5.2. In-band emissions ................................................................ 11 5.3. Out-of-band emissions ......................................................... 13 5.4. Frequency Stability............................................................... 15 5.5. AC Power-Line Conducted Emissions ................................. 16 Report No.: DRTFCC2209-0151 FCC ID: 2A8EJ-HLA-2301 This test report is prohibited to copy or reissue in whole or in part without the approval of DT&C Co., Ltd. TRF-RF-203(09)210316 Pages: 4 / 18 1. General Information 1.1. Description of EUT Equipment Class Low Power Communications Device Transmitter (DXX) Product Name AUTO Laminator Model Name HLA-2301 Add Model Name - Firmware Version Identification Number rev1.0 EUT Serial Number T-1/1(1) Power Supply AC 110V Frequency Range 13.56 MHz Modulation Type ASK Antenna Type Loop Antenna 1.2. Declaration by the applicant / manufacturer N/A Report No.: DRTFCC2209-0151 FCC ID: 2A8EJ-HLA-2301 This test report is prohibited to copy or reissue in whole or in part without the approval of DT&C Co., Ltd. TRF-RF-203(09)210316 Pages: 5 / 18 1.3. Testing Laboratory DT&C Co., Ltd. The 3 m test site and conducted measurement facility used to collect the radiated data are located at the 42, Yurim-ro, 154beon-gil, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea 17042. The test site complies with the requirements of § 2.948 according to ANSI C63.4-2014. - FCC & IC MRA Designation No. : KR0034 - ISED#: 5740A www.dtnc.net Telephone : + 82-31-321-2664 FAX : + 82-31-321-1664 1.4. Testing Environment Ambient Condition ▪ Temperature +21 °C ~ +26 °C ▪ Relative Humidity 38 % ~ 45 % 1.5. Measurement Uncertainty The measurement uncertainties shown below were calculated in accordance with requirements of ANSI C63.4- 2014 and ANSI C63.10-2013. All measurement uncertainty values are shown with a coverage factor of k = 2 to indicate a 95 % level of confidence. Parameter Measurement uncertainty AC power-line conducted emission 3.4 dB (The confidence level is about 95 %, k = 2) Radiated emission (Below 1 GHz) 4.9 dB (The confidence level is about 95 %, k = 2) Report No.: DRTFCC2209-0151 FCC ID: 2A8EJ-HLA-2301 This test report is prohibited to copy or reissue in whole or in part without the approval of DT&C Co., Ltd. TRF-RF-203(09)210316 Pages: 6 / 18 1.6. Test Equipment List Type Manufacturer Model Cal.Date (yy/mm/dd) Next.Cal.Date (yy/mm/dd) S/N Spectrum Analyzer Agilent Technologies N9020A 21/12/16 22/12/16 MY48010133 Spectrum Analyzer Agilent Technologies N9020A 22/06/24 23/06/24 US47360812 Multimeter FLUKE 17B+ 21/12/16 22/12/16 36390701W S Signal Generator Rohde Schwarz SMBV100A 21/12/16 22/12/16 255571 Thermohygrometer BODYCOM BJ5478 21/12/16 22/12/16 120612-1 Thermohygrometer BODYCOM BJ5478 21/12/16 22/12/16 120612-2 Loop Antenna ETS-Lindgren 6502 21/01/28 23/01/28 00226186 Hybrid Antenna Schwarzbeck VULB 9160 21/12/16 22/12/16 3362 PreAmplifier H.P 8447D 21/12/16 22/12/16 2944A07774 AC Power Supply DAEKWANG 5KVA 21/12/16 22/12/16 20060321-1 Temp & Humi Test Chamber ESPEC EFL-4 21/08/30 22/08/30 15018293 Cable HUBER+SUHNER SUCOFLEX100 22/01/04 23/01/04 M-01 Cable HUBER+SUHNER SUCOFLEX100 22/01/04 23/01/04 M-02 Cable JUNFLON MW X241 22/01/04 23/01/04 M-03 Cable JUNFLON J12J101757-00 22/01/04 23/01/04 M-07 Cable HUBER+SUHNER SUCOFLEX106 22/01/04 23/01/04 M-09 EMI Receiver ROHDE&SCHWARZ ESU 22/01/18 23/01/18 100538 PULSE LIMITER Rohde Schwarz ESH3-Z2 21/08/23 22/08/23 101333 LISN SCHWARZBECK NSLK 8128 RC 21/10/22 22/10/22 8128 RC-387 HYGROMETER TESTO 608-H1 22/01/14 23/01/14 34862883 Cable DT&C Cable 22/01/05 23/01/05 RFC-15 Test Software tsj Radiated Emission Measurement N/A N/A Version 2.00.0177 Test Software tsj Nois e Terminal Voltage Measurement N/A N/A Version 2.00.0170 Note1: The measurement antennas were calibrated in accordance to the requirements of ANSI C63.5-2017.…

Text truncated - open the document above for the full version.

FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. Test Setup photographs EUT Position: X-axis FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (0.009 ~ 30MHz) FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (Below 1GHz) FCC ID: 2A8EJ-HLA-2301 Copyright Ⓒ 2022, DT&C Co., Ltd. Test Setup Photo of AC Line Conducted Measurement