2A8HP-DHWireless camera monitor system

Wireless camera monitor system（transmitter） 8

Code:AB-RF-05-b ExternalPhotograph ANT Code:AB-RF-05-b Code:AB-RF-05-b Code:AB-RF-05-b

LabelLocationOnEUT Label

Code:AB-RF-05-b InternalPhotograph Code:AB-RF-05-b Code:AB-RF-05-b Code:AB-RF-05-b Code:AB-RF-05-b Code:AB-RF-05-b

Holland Vision Systems, Inc. Declaration concerning Antenna Specification It is hereby declared that the product Model No.: Model DH, H7W-DH FCC ID : 2A8HP-DH fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for external antenna type(s) described below: Model No. of antenna: AN2400-9298SM Type of antenna: External antenna (permanently attached） Gain of the antenna: 4.68 dBi Frequency range: 2412~2462MHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: Holland Vision Systems, Inc. Address: 11301 James St., Holland, MI 49424, USA City: Holland ZIP / Postal code: / Country: USA Place: Holland Date: 8/29/2022 Signature: version01

Product Number: AN2400-9298SM Product Name: Antenna Page 1 Specification For Approval Date: 2013 / 11 / 20 File No.: 13120009 Version: 1.0 Customer： WS Customer P/N： / INVAX P/N： AN2400-9298SM Description : Antenna Cortec Checked By: Customer Approved By: INVAX System Technology Corp. Cortec Technology Inc. 4F. No. 815.Chung Hsiao East Rd.,Sec.5 Xian-Xi Industrial, Sha-Tou Administration Zone, Taipei, TAIWAN Chang-An Town, Dong-Guan City, Guangdong Province, China TEL:886-2-2788-5218 FAX:886-2-2783-1658 TEL:86-769-85388261 FAX:86-769-85317869 http://www.invaxsystem.com http://www.cortec.com.cn Product Number: AN2400-9298SM Product Name: Antenna Page 2 Index: 1. Revision History / Page 3 2. Specification / Page 4 3. Characteristics and Reliability Test / Page 5 4. Antenna - S Parameter Test Data / Page 6 5. Antenna - Radiation Pattern Test Data / Page 7 ~ 9 6. Mechanical and Packing Drawing / Page 10 ~ 11 7. Material Description and RoHS Test Report / Page 12 ~ end Product Number: AN2400-9298SM Product Name: Antenna Page 3 1. Revision History Revision Date Change NotificationDescription 1.0 Product Number: AN2400-9298SM Product Name: Antenna Page 4 2. Specification Sample Photo A. Electrical Characteristics Frequency 2400 ~ 2500 MHz S.W.R. <= 2.0 Antenna Gain 5.0± 0.7dBi @ 2450 MHz Polarization Linear Impedance 50 Ohm B. Material & Mechanical Characteristics Material of Radiator CU Material of Plastic Body: TPEE Hinge: ABS Holder: ABS Cable Type RG-178 Connector Type SMA Male Connector Pull Test >= 5 Kg C. Environmental Operation Temperature - 40 ̊C ~ + 65 ̊C Storage Temperature - 40 ̊C ~ + 80 ̊C Antenna Color Storage life < 2 year Product Number: AN2400-9298SM Product Name: Antenna Page 5 3. Characteristics and Reliability Test Test Items Test Condition and Procedure Requirements C1 S.W.R. Set DUT on Network Analyzer; make individual calibration to test Directive DUT specification C2 Antenna Gain Set DUT on Antenna Chamber; make individual calibration to test Directive DUT specification M1 Vibration GB / T2423 . 48-1997 Amplitude: 0.03 inch (1.5mm); Freq: 20 to 80 to 20 Hz 3 directions; 2 hours for each direction 1. No Visual Damage 2. Frequency Tol.<= 5% M2 Random Drop GB / T2423.8-1995 Height: 1.0 Meter; 3 directions; 1 time for each direction 1. No parts separated 2. Frequency Tol.<= 5% M3 Solderability GB 2423 . 28- 82 Solder iron: 260±5°C; Duration: 5 seconds 1. Mounted on PCB 2. No Visual Damage M4 Terminal- Pull Test Holding with individual specification; force applied to axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M5 Terminal- Torque Test Holding with individual specification; applied clockwise and counterclockwise to the axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M6 Dimension Inspection of dimension, color, material, package, surface process Directive DUT specification E1 Salt Spray GB / T 2423 . 17- 93 Temp: 35°C; RH: >= 95%; NaCl solution: >= 5%; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E2 Humidity GB / T 2423 . 4 - 93 Temp: 80°C / 12 H; -40°C / 12H RH: >= 90%; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E3 Thermal Shock GB / T 2423 . 22 - 87 1 Cycle: - 40°C (30 minutes) to + 80°C (30 minutes) Cycles: 24 After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E4 Life (High Temp.) GB /T 2423 . 2 - 89 Temp: 80°C; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% R1 RoHS With Reference to IEC 62321:2008 with flow chart Directive RoHS 2011/65/EU R2 PFOS With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC R3 PFOA With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC Product Number: AN2400-9298SM Product Name: Antenna Page 6 4. Antenna - S Parameter Test Data Product Number: AN2400-9298SM Product Name: Antenna Page 7 5. Antenna - Radiation Pattern Test Data Testing Equipment Specification: Antenna Anechoic Chamber Dimension: 8 x 4 x 4 m Quite Zone: 600mm @1 GHz Isolation: >100dB @ 1 MHz ~ 10 GHz Testing Equipment: Agilent 5071B Received Antenna: 0.7 ~ 6.0 GHz for Gain Calibration Double Ridged Horn Antenna 6. Mechanical Drawing See attached files 7. Material Description and RoHS Test Report See attached files 填表： 時麗 部門： 研發部 職務： 文員 Cd Pb Hg Cr(VI) PBBs PBDEs 1 TPEE N.D. N.D. N.D. N.D. N.D. N.D. CE201343303 2013.04.22 THERMOPLASTIC SGS 2 ABS N.D. N.D. N.D. N.D. N.D. N.D. KA/2012/C1575 2013.01.02 ACRYLONITRILE SGS 3 AN03-514PB Pin POM N.D. N.D. N.D. N.D. N.D. N.D. CANEC1302200001 2013.03.01 POM SGS 4 FEP N.D. N.D. N.D. N.D. N.D. N.D. RHS05F011891001E 2013.08.26 电线电缆料 CTI 5 PTFE N.D. N.D. N.D. N.D. N.D. N.D. RHS05F011891002E 2013.08.26 电线电缆料 CTI 6 鍍銀銅 N.D. N.D. N.D. Negative N.D. N.D. RHS05F011891004E 2013.08.26 电线电缆料 CTI 7 R-AN65-25 Plug PE N.D. N.D. N.D. N.D. N.D. N.D. RHS01F007187001 2013.07.12 HDPE/XLPE/FPE CTI 8 R-AN1901-05 Tube CU N.D. 14 N.D. Negative N.D. N.D. CANML1216541101 2012.12.05 C2700 SGS 9 AN1922-SPRING Spring CU 66 31000 N.D. Negative CE201314616 2013.01.28 F REECUTTINGBRASSBA R SGS 10 R-HSTUBE-006N-1 HSTUBE EVA N.D. N.D. N.D. N.D. N.D. N.D. CANEC1303661001 2013.03.28 HEAT SHRINKABLE SGS 11 CU 66 31000 N.D. Negative CE201314616 2013.01.28 F REECUTTINGBRASSBA R SGS 12 POM N.D. N.D. N.D. N.D. N.D. N.D. CANEC1302200001 2013.03.01 POM SGS 13 R-AN5225013-Z Tube 鋅合金 N.D. 15 N.D. Negative N.D. N.D. A001R121106068001-1 2012.11.09 锌合金锭 AOV 歐盟 ROHS 指令豁免條款 2009/95/BC 、钢中合金元素中的铅含量达 0.35% 、铝含量达 0.4% 、铜合金中的铅含量达 4% COR/F-G-47a SMA Male SMA306-CPR5A03-H 包裝材料中鉛、鎘、汞、六價鉻總含量不超過 100ppm ，鎘的允許濃度為 5ppm 測試機構名 稱 根據測試報告如實填寫鉛、鎘、汞、六價鉻、 PBBs 和 PBDEs 六項禁用物質的含量 序號 AN9201-04BAN9203-02B AN0304-T06B Body1Body2Body3 Cable R-RG-178U 康捷電子有限公司 物料名稱：AN2400-9298SM 各構成物料 的材質 測試名稱 測試報告裡 RoHS 對應物質測試結果 檢測報告編號 測試日期 物料型號 物料各構成名稱 物料中 HSF 對象物質含量調查表

RFEXPOSUREEVALUATION AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeusedto evaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF)Radiation asspecifiedin§1.1307(b) FCCID:2A8HP-DH EUTSpecification EUT Wirelesscameramonitorsystem Frequencyband(Operating)WLAN:2.412GHz~2.462GHz WLAN:5.18GHz~5.32GHz/5.50GHz~5.70GHz WLAN:5.745GHz~5825GHz Others:BLE:2402-2480MHz DevicecategoryPortable(<20cmseparation) Mobile(>20cmseparation) Others___ ExposureclassificationOccupational/Controlledexposure(S=5mW/cm2) GeneralPopulation/Uncontrolledexposure(S=1mW/cm2) AntennadiversitySingleantenna Multipleantennas Txdiversity Rxdiversity Tx/Rxdiversity Max.outputpower17.27dBm(0.0533W) Antennagain(Max)4.68dBi EvaluationappliedMPEEvaluation SAREvaluation LimitsforMaximumPermissibleExposure(MPE) Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) Power Density(mW/cm 2 ) Average Time (A)LimitsforOccupational/ControlExposures 300-1500----F/3006 1500-100000----56 (B)LimitsforGeneralPopulation/UncontrolExposures 300-1500----F/15006 1500-100000----130 Friistransmissionformula:Pd=(Pout*G)\(4*pi*R2) Where Pd=PowerdensityinmW/cm 2 Pout=outputpowertoantennainMw G=gainofantennainlinearscale Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdthelimitofMPE,1mW/cm2.Ifweknowthemaximumgainoftheantennaand totalpowerinputtotheantenna,throughthecalculation,wewillknowthedistance wheretheMPElimitisreached. MeasurementResult Operating Mode Channel Frequency (MHz) Maximum output power (dBm) Tuneup tolerance (dBm) Max.Tuneup Power (dBm) Antenna Gain (dBi) Power densityat 20cm (mW/cm2) Power density Limits (mW/cm2) 802.11b 2412 17.1117.11 ±1 18.114.680.0378 1 2437 17.0317.03 ±1 18.034.680.0371 1 2462 17.2717.27 ±1 18.274.680.0392 1

Page1of21 AppendixTestData ReportNo.:18220WC20179901TestSampleNo.:1-2-2 StartTestDate:2022.8.9FinishTestDate:2022.8.19 TestEngineer:Auditor: Temperature:26.3°CRelativeHumidity:47% Pressure:1012hPa AppendixA:DTSBandwidth TestResult TestModeAntennaFrequency[MHz] DTSBW [MHz] FL[MHz]FH[MHz]Limit[MHz]Verdict 11BAnt1 24129.1202407.4402416.560≥0.5PASS 24379.0802432.4802441.560≥0.5PASS 24629.5202457.4802467.000≥0.5PASS Page2of21 TestGraphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 Page3of21 Page4of21 AppendixB:OccupiedChannelBandwidth TestResult TestModeAntenna Channel Frequency[MHz] OCB [MHz] FL[MHz]FH[MHz]Limit[MHz]Verdict 11BAnt1 241212.2812405.92482418.2058------ 243712.3112430.86202443.1730------ 246212.3582455.82212468.1801------ Page5of21 TestGraphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 Page6of21 Page7of21 AppendixC:Maximumconductedoutputpower TestResultPeak TestModeAntenna Frequen cy[MHz] Set Power Peak Powert[dBm] Conducted Limit[dBm] Verdict 11BAnt1 2412---17.11≤30.00PASS 2437---17.03≤30.00PASS 2462---17.27≤30.00PASS Page8of21 AppendixD:Maximumpowerspectraldensity TestResult TestModeAntennaFrequency[MHz]Result[dBm/3kHz]Limit[dBm/3kHz]Verdict 11BAnt1 2412-8.72≤8.00PASS 2437-8.18≤8.00PASS 2462-8.49≤8.00PASS Page9of21 TestGraphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 Page10of21 Page11of21 AppendixE:Bandedgemeasurements TestResult TestMod e Antenn a ChNam e Frequency[MHz ] RefLevel[dBm ] Result[dBm ] Limit[dBm ] Verdic t 11BAnt1 Low24125.52-47.94≤-14.48PASS High24625.76-54.85≤-14.24PASS Page12of21 TestGraphs 11B_Ant1_Low_2412 11B_Ant1_High_2462 Page13of21 AppendixF:ConductedSpuriousEmission TestResult TestModeAntennaFrequency[MHz] FreqRange [Mhz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict 11BAnt1 2412 Reference5.245.24---PASS 30~10005.24-69.2≤-14.76PASS 1000~265005.24-53.67≤-14.76PASS 2437 Reference5.565.56---PASS 30~10005.56-69.45≤-14.44PASS 1000~265005.56-53.87≤-14.44PASS 2462 Reference5.805.80---PASS 30~10005.80-67.84≤-14.2PASS 1000~265005.80-54.29≤-14.2PASS Page14of21 TestGraphs 11B_Ant1_2412_0~Reference 11B_Ant1_2412_30~1000 11B_Ant1_2412_1000~26500 Page15of21 11B_Ant1_2437_0~Reference 11B_Ant1_2437_30~1000 Page16of21 11B_Ant1_2437_1000~26500 11B_Ant1_2462_0~Reference Page17of21 11B_Ant1_2462_30~1000 11B_Ant1_2462_1000~26500 Page18of21 Page19of21 AppendixG:DutyCycle TestResult TestModeAntennaFrequency[MHz] Transmission Duration[ms] Transmission Period[ms] DutyCycle [%] Factor 11BAnt1 24128.398.4299.640.02 24378.398.4299.640.02 24628.388.4199.640.02 Page20of21 TestGraphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 Page21of21 ---End---

ReportNo.:18220WC20179901FCCID:2A8HP-DHPage1of27 Code:AB-RF-05-b FCCTestReport ClientName:HollandVisionSystems,Inc. ClientAddress:11301JamesSt.,Holland,MI49424,USA ProductName:Wirelesscameramonitorsystem ReportDate:Aug.29,2022 ShenzhenAnbotekComplianceLaboratoryLimited ReportNo.:18220WC20179901FCCID:2A8HP-DHPage2of27 Code:AB-RF-05-b Contents 1.GeneralInformation............................................................................................................................................6 1.1.ClientInformation.....................................................................................................................................6 1.2.DescriptionofDevice(EUT)..................................................................................................................6 1.3.AuxiliaryEquipmentUsedDuringTest.................................................................................................7 1.4.DescriptionofTestConfiguration..........................................................................................................7 1.5.DescriptionOfTestSetup.......................................................................................................................8 1.6.TestEquipmentList.................................................................................................................................9 1.7.MeasurementUncertainty....................................................................................................................10 1.8.DescriptionofTestFacility....................................................................................................................10 2.SummaryofTestResults.................................................................................................................................11 3.ConductedEmissionTest................................................................................................................................12 3.1.TestStandardandLimit........................................................................................................................12 3.2.TestSetup...............................................................................................................................................12 3.3.TestProcedure.......................................................................................................................................12 3.4.TestData.................................................................................................................................................12 4.RadiationSpuriousEmissionandBandEdge.............................................................................................13 4.1.TestStandardandLimit........................................................................................................................13 4.2.TestSetup...............................................................................................................................................13 4.3.TestProcedure.......................................................................................................................................14 4.4.TestData.................................................................................................................................................15 5.MaximumPeakOutputPowerTest................................................................................................................22 5.1.TestStandardandLimit........................................................................................................................22 5.2.TestSetup...............................................................................................................................................22 5.3.TestProcedure.......................................................................................................................................22 5.4.TestData.................................................................................................................................................22 6.6DBOccupyBandwidthTest...........................................................................................................................23 6.1.TestStandardandLimit........................................................................................................................23 6.2.TestSetup...............................................................................................................................................23 6.3.TestProcedure.......................................................................................................................................23 6.4.TestData.................................................................................................................................................23 7.PowerSpectralDensityTest...........................................................................................................................24 7.1.TestStandardandLimit........................................................................................................................24 7.2.TestSetup...............................................................................................................................................24 7.3.TestProcedure.......................................................................................................................................24 7.4.TestData.................................................................................................................................................24 8.100kHzBandwidthofFrequencyBandEdgeRequirement......................................................................25 8.1.TestStandardandLimit........................................................................................................................25 8.2.TestSetup.....................................................…

Text truncated - open the document above for the full version.

Code:AB-RF-05-b TestSetupPhotograph PhotoofRadiationEmissionTest