2A8HRS25441-B57-A32.4 GHz ZRadio System, On-Board Radio

Product Installation Instruction Manual SUBJECT: Professional Installation Instructions for Customers NO: 1.001 VER: A PRODUCTS: ZRadio SX and F Device; Part Nos.: ZRadio SX: S25442-B58-A2: ZRadio F: S25441-B57-A3 DATE: 04-26-2023 Dear Valued Siemens Customer: I. BACKGROUND Siemens Mobility, Inc. provides the following installation instructions to be followed by any purchaser or installer of the ZRadio SX and F Device products. WARNING THE PROFESSIONAL INSTALLATION INSTRUCTIONS IN THIS BULLETIN SET FORTH BELOW SHALL BE FOLLOWED DURING PRODUCT INSTALLATION ALONG WITH ANY APPLICABLE RECORD REQUIREMENTS. II. INSTALLATION INSTRUCTIONS 1) Installation A qualified staff must perform the installation meeting the following criteria: • Due to your technical education, expertise, and experience as well as knowledge of the relevant regulations, you are able to perform the assigned tasks independently and identify potential risks. • You have been specially trained and examined for the assigned work on the described equipment. • The operator has authorized you to perform work on the described equipment in accordance with the standards governing railway signaling and safety systems. a) Fixation of outdoor WiFi patch antenna • The installation of the WiFi patch antenna must be done so that a beam angle of about 30 ° iron-free is maintained. The emission direction should be kept parallel to the signal optics. The antenna vertically mounted with SMA connector. b) Observance of regulations • Observe all safety regulations for your personal safety and for protection of the described equipment. • Also observe the provisions of the operator and the statutory regulations for the prevention of accidents. c) Work rules • Only operate the described equipment if it is in perfect working order. Report any faults which have been detected to the authority or person responsible. • Only conduct the work in such a way that human safety is not compromised, or operation of the described equipment impaired in any way. • Protect yourself! Be careful when working in track areas. Always wear protective clothing when conducting work that may cause injuries. Adhere to the applicable regulations of the operator. • Before performing any work, request or conduct the necessary operational actions in accordance with the relevant railway/operator’s regulations. It is only then that safety facilities may be deactivated. • Fully re-activate the safety equipment once the work has been completed. Check the safety facilities for proper functioning. • Inform staff of possible incorrect action. • Ensure that no unauthorized persons enter the danger zone. 2) Application • The Radio module along with antenna is used for directional transmission and reception of radio telegrams along the line. • The described equipment serves to ensure safe railway operations. It may only be used for the range of applications stipulated by Siemens. • Also observe the operator's rules, regulations, and approvals, etc. of the responsible authorities. 3) Resale Prohibited The ZRadio SX and F device should not be re-sold to the general consumer public. Any questions contact Siemens Mobility Inc. for further details and restrictions. III. Conclusion A copy of this product installation manual can be found at the following website: https://www.mobility.siemens.com/us/en/portfolio/rail/automation/manuals.html Please contact your local Siemens Account Representative should you have any questions regarding this product installation manual.

ZRadio Document Status: Doc. ID: SMI-ENG-FCC-00001 1 User Manual Released Revision: 0.0 of 21 Copyright © 2023 Siemens Mobility Rail Infrastructure. All rights reserved Restricted ZRadio User Manual FCC WARNING This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 subpart B of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. In order to comply with the FCC RF Exposure Requirements of section 1.1307, the antenna of the device must be installed such that a minimum separation distance of 20 cm is maintained between the antenna and any person. ZRadio Document Status: Doc. ID: SMI-ENG-FCC-00001 2 User Manual Released Revision: 0.0 of 21 Copyright © 2023 Siemens Mobility Rail Infrastructure. All rights reserved Restricted Document history Revision Date Author Sections changed Change 0.1 12/14/2022 Vishwanath Badiger All Initial Creation 0.0 1/3/2023 Vishwanath Badiger Released Name Department Electronic Signature Released by Francesco Mantovani SMO NAM RC-US RI PSGR PE MGR2 Formally checked by Stefan Makuch SMO NAM RC-US RI QM PRJ Contents checked by Justin Kibler SMO NAM RC-US RI PSGR WY A-IXL Author Vishwanath Badiger SMO NAM RC-US RI PSGR WY A-IXL Siemens Mobility, Inc. One Penn Plaza New York, NY 10119 USA www.siemens.com The contents of this document are proprietary and shall not be disclosed to any other party or reproduced by any means without prior written permission from Siemens Mobility, Inc. Subject to the terms in the applicable contract, Siemens Mobility, Inc. shall be deemed the author and sole owner of this document, including its contents and all information and data contained therein. Siemens Mobility, Inc. shall retain exclusive ownership of all intellectual property rights, patent rights, trademarks, trade secrets, copyrights, proprietary rights, as well as common law, statutory, and other reserved rights associated with the document and its contents. Copyright © 2023 Siemens Mobility, Inc. All rights reserved. ZRadio Document Status: Doc. ID: SMI-ENG-FCC-00001 3 User Manual Released Revision: 0.0 of 21 Copyright © 2023 Siemens Mobility Rail Infrastructure. All rights reserved Restricted Table of Contents 1. Information for the users............................................................................................................. 5 1.1. Introduction ........................................................................................................................ 5 Scope ...................................................................................................................... 5 Purpose .................................................................................................................. 5 1.2. Acronyms and Abbreviations ........................................................................................... 5 1.3. References ......................................................................................................................... 6 Applicable PC programs ......................................................................................... 6 2. Radio Equipment Wayside (ZRadio Sx) and On-board (ZRadio F) ......................................... 7 2.1. Explanation of LEDs on ZRadio ....................................................................................... 8 2.2. Hardware parameters of ZRadio ...................................................................................... 8 Operating mode OPM at ZRadio F ......................................................................... 9 Operating mode OPM for ZRadio Sx....................................................................10 Transmission power TXP .....................................................................................10 Radio channel pair CHP .......................................................................................11 Facility identifier RID .............................................................................................12 3. Wi-Fi Patch Antenna ..................................................................................................................13 3.1. Function ............................................................................................................................13 Antenna Datasheet ...............................................................................................13 3.2. Fault rectification for ZRadio infill function ..................................................................16 LED Indications.....................................................................................................16 Replacement of ZRadio ........................................................................................17 4. General Technical Conditions ..................................................................................................18 4.1. Ambient conditions .........................................................................................................18 Power supply ........................................................................................................18 Ambient Temperature ...........................................................................................18 Humidity ................................................................................................................18 Degree of protection ......................................................................…

Text truncated - open the document above for the full version.

U.S. Agent Designation for Service of Process (Applicant is Both Grantee and U.S. Agent) TO: American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant Company name: Siemens Mobility Inc. FRN #: 0032806093 Grantee Code: 2A8HR Contact Name: Omer Metel Street Address: 162 East Bridge St., Suite 200 City/Province/Zip: Homestead, 15120 Telephone No: 909 908 3301 Email: [email protected] Applicant Signature 1 : Date: 06/12/2023 Signed by (Printed Name/Title): Omer Metel 1 - Letters must be placed on appropriate letterhead. The signee for the applicant must be one of the following: Applicant (grantee) contact of record in the FCC’s authorization system, or authorized officers or employee of the applicant (grantee).

Siemens Mobility, Inc. 162 East Bridge St. Homestead, PA 15120 Certification Application Attestation Statements Date: May 1, 2023 Via Electronic Mail American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) Siemens Mobility, Inc. (“SMI”) certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: N/A Statement for 47 CFR section 2.911(d)(5)(ii) Siemens Mobility, Inc. (“SMI”) (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is / - is not identified on the Covered List as an entity producing “covered” equipment. Thank you, By: __________________________ _Omer Metel____ (Signature) (Print name) Title: Head Of Engineering Company: Siemens Mobility, Inc. (“SMI”) Telephone: 909-908-3301 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist .

Siemens Mobility, Inc. Name: Omer Metel 162 East Bridge Street, Suite 200 Department: Head of Onboard/Engineering Homestead, PA 15120 Telephone: (909) 908-3301 E-Mail: [email protected] September 25, 2023 Via Electronic Mail American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 Re: Professional Installation – ZRadio SX and F Device; Part Nos.: ZRadio SX: S25442-B58-A2: ZRadio F: S25441-B57-A3. To Whom it May Concern: Siemens Mobility, Inc. (“Siemens”) hereby submits this letter in support of its Federal Communications Commission (“FCC”) product certification application (“Application”). Siemens is the manufacturer and supplier of rail infrastructure technology including the ZRadio SX and F Device products (“ZRadio SX and F Device Products”) which are the subject of the instant Application. In accordance with the FCC’s Office of Engineering and Technology Laboratory Division Basic Equipment Authorization Guidance for Antennas Used with Part 15 Intentional Radiators (Ref: KDB 353028 D01) dated March 4, 2022, and in particular, Section II (A)(2)(c)(iii) and (iv) (Professional Installation), Siemens hereby submits the following information: • Hardware is Not Readily Available to the Average Consumer. The ZRadio SX and F Device Products are restricted for industrial rail infrastructure applications only and are not for use by consumers or the general public and are not available for sale to consumers or the general public. • Device Is Not Sold Retail or to the General Public. Siemens as the manufacturer and seller of the ZRadio SX and F Device Products does not sell or market the products to the general public. The ZRadio SX and F Device Products are only marketed to and sold to public transit agencies and sophisticated railroad installation contractors that have the experience and knowledge to install these types of devices that are part of larger complex train control systems. • Intended Use is Not for Consumers or General Public. The ZRadio SX and F Device Products are solely sold for industrial rail infrastructure applications and are not intended for use by consumers or the general public. 2 • Sophisticated, Complex, and Specialized Nature of the Equipment. The ZRadio SX and F Device Products is used for directional transmission and reception of radio telegrams along the railway line. The radio module along with the antenna serves to ensure safe railway operations and thus is required to be installed by professional and knowledgeable installers that are employed by either the public transit agency itself or by sophisticated railroad installation contractors that have the experience and knowledge to install these types of devices that are part of larger complex train control systems. • Other Professional Installation Requirements. Siemens furnishes every public transit agency or sophisticated railroad installation contractor installer of the ZRadio SX and F Device Products a detailed product installation instruction manual which specifically outlines that the devices should be installed by professional installers with proper technical education and expertise and following the specific installation instructions set forth in the manual including that the installation of the Wi-Fi patch antenna must be completed such that a beam angle of about 30º iron-free is maintained. The emission direction should be kept parallel to the signal optics. The antenna vertically mounted with SMA connector. Should you have any questions regarding this matter or require any further information to process the Application, please feel free to contact me directly at (909) 908-3301. Sincerely, Omer Metel Head of Onboard/Engineering Siemens Mobility, Inc. cc: Vishwanath Badiger Francesco Mantovani Jason Vogler

Authority to Act as Agent Date: 2/20/2023 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 Re: Submission of FCC Application To Whom It May Concern: I, the undersigned, hereby authorize Richard Reitz of Retlif Testing Laboratories to act on behalf of Siemens Mobility, Inc. (“SMI”) for the limited and exclusive purposes of submitting an FCC application to the Federal Communications Commission (“FCC”), American Certification Body, Inc. (“ACB”), or other accrediting body in relation to SMI’s equipment. This authorization shall continue in effect until 360 days from the date hereof unless otherwise extended by SMI. This authorization granted herein is limited in nature and restricted to only the foregoing purpose and is fully revocable by SMI at any time. The authority granted herein may not be redelegated or transferred by Richard Reitz/Retliff Testing Laboratories to any other person or entity without SMI’s written permission. SMI certifies that it is not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. SMI also declares that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date:__ 360 days herefrom By: _________________ Omer Metel (Signature ) (Print name) Title: Head of Engineering_ On behalf of: Siemens Mobility Inc. Telephone: 909-908-3301_

Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2A8HRS25441-B57-A3 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name • Block diagram, • Schematics, • operational Description, • Parts List ZRadio F: 2A8HRS25441-B57-A3BlkDia.pdf 2A8HRS25441-B57-A3Schem.pdf 2A8HRS25441-B57-A3OpDes.pdf 2A8HRS25441-B57-A3PartsLst.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name External Photos, Internal Photos, User Manual ZRadio F: 2A8HRS25441-B57-A3ExtPho.pdf 2A8HRS25441-B57-A3IntPho.pdf 2A8HRS25441-B57-A3UserMan.pdf Sincerely, Print name: Omer Metel Signature:

F Radio, Front F Radio, Side

FCC ID: 2A8HRS25441-B57-A3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Information about label: 1) Dimensions: 2 inch x 1 inch 2) Font size(s): Arial 8/6 3) Label material: Screen Printable Sheet Polyester Label Material, 3M 7908 WHITE MYLAR (From Adhesa-plate) 4) Method of attachment which makes it permanent: ➢ These materials utilize 3M™ Adhesive 350, which is designed to permanently bond to high and low surface energy plastics, textured and contoured surfaces, powder coatings, and slightly oily metals. ➢ For maximum bond strength, the surface should be clean and dry. Typical cleaning solvents are heptane and isopropyl alcohol. ➢ For best bonding conditions, application surface should be at room temperature or higher. Low temperature surfaces, below 50°F (10°C), can cause the adhesive to become so firm that it will not develop maximum contact with the substrate. Higher initial bonds can be achieved through increased rubdown pressure. ➢ 3M screen printable sheet polyester label material 7908 is UL recognized (File MH16411) and CSA accepted (File 99316). See the UL and CSA listings for details. ➢ Service Temperature: -40°F to 302°F (-40°C to 149°C)

FCC ID: 2A8HRS25441-B57-A3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Retlif Testing Laboratories Report No. R-3578P-6B For Siemens Mobility, Inc. On-Board Radio FCC ID: 2A8HRS25441-B57-A3 Requirement: 1.1310(d)(2), Radiofrequency Radiation Exposure Limits (MPE Calculations) Retlif Testing Laboratories Report No. R-3587P-6B Page 2 of 4 Requirements and Test Results Requirement: 1.1310(d)(2), Radiofrequency Radiation Exposure Limits For operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in Table 1 in paragraph (e)(1) of this section, may be used instead of whole-body SAR limits as set forth in paragraphs (a) through (c) of this section to evaluate the environmental impact of human exposure to RF radiation as specified in § 1.1307(b) of this part, except for portable devices as defined in § 2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in § 2.1093. Table 1 FCC § 1.1310(e)(1) - Limits for Maximum Permissible Exposure (MPE) f = frequency in MHz. * = Plane-wave equivalent power density. • Results: The calculated power density based on the manufacturers specified antenna gain and maximum measured output power did not exceed the specified MPE limits at a distance of 20 cm for both General Population/Uncontrolled Exposure and for Occupational/Controlled Exposure. Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *(100) ≤6 3.0-30 1842/f 4.89/f *(900/f 2 ) <6 30-300 61.4 0.163 1.0 <6 300-1,500 f/300 <6 1,500-100,000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) <30 1.34-30 824/f 2.19/f *(180/f 2 ) <30 30-300 27.5 0.073 0.2 <30 300-1,500 f/1500 <30 1,500-100,000 1.0 <30 Retlif Testing Laboratories Report No. R-3587P-6B Page 3 of 4 MPE CALCULATION DATA SHEET Test Specification: FCC Part 1.1310, Radiofrequency radiation exposure limits Method: FCC Part 1.1310 (d)(2), Maximum Permissible Exposure (MPE) Limit: FCC Part 1.1310 (e)(1), Table 1, Section(ii), Limits for General Population / Uncontrolled Exposure Job Number/Customer: R-3578P-6B/ Siemens Mobility Test Sample: 2.4 GHz ZRadio System, Train to Wayside Communications Model Number: S25441-B57-A3-1.B; 8708660000 (P/S) Serial Number: 6101142745-003; 7508000291 (P/S) Date(s): 2/2/23 Radio The test sample is a DTS Radio operating in the 2400 to 2483.5 MHz frequency band Antenna Employed The test sample utilizes the following antenna: Manufacturer: Huber+Suhner Model: SENCITY Spot-S Part Number: 1324.17.0098 Antenna Gain: 8.5 dBi MPE Evaluation for Single Source Emitters Band Antenna Gain Conducted Output EIRP PG Result Limit dBi Numeric dBm mW dBm mW mW/cm 2 mW/cm 2 WiFi 8.5 7.079 9.01 7.962 17.510 56.364 0.011 1.000 The transmitter complies with the specified MPE limits at a distance of 20 cm for both General Population/Uncontrolled Exposure and for Occupational Controlled Exposure. Retlif Testing Laboratories Report No. R-3587P-6B Page 4 of 4

Report of Measurements FCC Part 15, Subpart C, Section 15.247 On 2.4 GHz ZRadio System, Train to Wayside Communications On-Board Radio FCC ID: 2A8HRS25441-B57-A3 Customer Name: Siemens Mobility Customer P.O: 4510076816 Date of Report: February 28, 2023 Test Report No: R-3578P-6B, Rev. A Test Start Date: August 2, 2022 Test Finish Date: February 27, 2023 Our letters, procedures and reports are for the exclusive use of the customer to whom they are addressed and their communication or the use of the name of Retlif Testing Laboratories must receive our prior written approval. Our letters, procedures and reports apply only to the sample tested and are not necessarily indicative of the qualities of apparently identical or similar products. The letters, procedures and reports and the name of Retlif Testing Laboratories or insignia are not to be used under any circumstances in advertising to the general public. This test report shall not be reproduced, except in full, without the written approval of Retlif Testing Laboratories. Certification and Signatures We certify that this report is a true representation of the results obtained from the tests of the equipment stated. We further certify that the measurements shown in this report were made in accordance with the procedures indicated and vouch for the qualifications of all Retlif Testing Laboratories personnel taking them. Richard J. Reitz Director of Engineering iNARTE Electromagnetic Compatibility Engineer EMC-050739-E Scott Wentworth Branch Manager Non-Warranty Provision The testing services have been performed, findings obtained and reports prepared in accordance with generally accepted laboratory principles and practices. This warranty is in lieu of all others, either expressed or implied. Non-Endorsement This test report contains only findings and results arrived at after employing the specific test procedures and standards listed herein. It is not intended to constitute a recommendation, endorsement or certification of the product or material tested. This test report must not be used by the client to claim product endorsement by ANAB or any agency of the U.S. Government. Retlif Testing Laboratories Report No. R-3587P-6B, Rev. A Page 2 of 35 Table of Contents List of Tables ........................................................................................................................ 2 Tests Performed ................................................................................................................... 4 General Test Information ...................................................................................................... 5 Requirements and Test Results ............................................................................................ 6 Requirement: 15.247(a)(2), Minimum 6 dB Bandwidth .................................................. 6 Requirements and Test Results .......................................................................................... 10 Requirement: 15.247(b)(3), Maximum Peak Conducted Output Power ....................... 10 Requirements and Test Results .......................................................................................... 18 Requirement: 15.247(b)(4), Antenna Gain ................................................................... 18 Requirements and Test Results .......................................................................................... 19 Requirement: 15.247(d), Out of Band Emissions ......................................................... 19 Requirements and Test Results .......................................................................................... 29 Requirement: 15.247(e), Power Spectral Density ........................................................ 29 Requirements and Test Results .......................................................................................... 33 Requirement: 15.109(a) / 15.209(a), Radiated Emissions, General Requirements ...... 33 List of Tables Table 1 - Radiated Emission Limits .................................................................................... 33 Retlif Testing Laboratories Report No. R-3587P-6B, Rev. A Page 3 of 35 Technical Information Report Number: R-3578P-6B, Rev. A Applicant: Siemens Mobility, Inc. Address: 162 East Bridge Street Suite 200 Homestead, PA 15120 FRN: 0032806093 Test Sample: 2.4 GHz ZRadio System, Train to Wayside Comm Model Number: S25441-B57-A3-1.B FCC ID: 2A8HRS25441-B57-A3 Frequency Range of Operation: 2405 to 2480 MHz Power Output: 7.96 mW Antenna Gain: 8.5 dBi Equipment Class: DTS – Digital Transmission System Equipment Use: Mobile Power Requirements: 24 Vdc Derived from Vehicle Transmission Protocols/Modulation IEEE 802.15.4 Test Specifications: FCC Rules and Regulations Part 15, Subpart C, Section 15.247 Test Procedures: ANSI C63.4: 2014 ANSI C63.10: 2013 Test Facility: Retlif Testing Laboratories 3131 Detwiler Road Harleysville, PA 19438 FCC Registered Designation Number: US2321 Retlif Testing Laboratories Report No. R-3587P-6B, Rev. A Page 4 of 35 Tests Performed The test methods that were performed to demonstrate compliance with the FCC Rules are shown below: FCC Part 15, Subpart C Rule Section ANSI C63.10 Test Method Test Result 1.1310 Radiofrequency Radiation Exposure Limits N/A Pass 15.247(a)(2), Minimum 6 dB Bandwidth 11.8 DTS Bandwidth Pass 15.247(b)(3), Maximum Peak Conducted Output Power 11.9 Fundamental Emission Output Power Pass 15.247(b)(4), Antenna Gain N/A Pass 15.247(d), Out of Band Emissions 15.209, Radiated Emissions Limits 15.205, Restricted Bands of Operation 11.11 Emissions in Non-Restricted Frequency Bands Pass 11.12 Emissions in Restricted Frequency Bands – 11.12.1 Radiated Emissions Measurements Pass …

Text truncated - open the document above for the full version.