2A8IX-QYVB00726Wireless remote control prostate massager

1.按住主体按键（）3秒启动产品，10种震动模式 可 以选择，长按关闭。 2.按住遥控器按键（）3秒开启遥控器，长按关闭。 3.按住遥控器按键（）1秒启动大马达震动功能，10种震动模式可以选择，长按关闭。 4.按住遥控器按键（波浪）1秒启动小马达震动功能，10种震动模式。 5.LED状态指示灯说明∶开启状态∶白灯长亮 6.低电量（充电提醒）∶全部白灯闪烁充电中∶白灯循环闪烁充电完成∶全部白灯长亮。 1. Press and hold the main button () for 3 seconds to activate the product, 10 vibration modes can be selected, press and hold to switch off. 2. Press and hold the remote control button () for 3 seconds to turn on the remote control, press and hold to turn off. 3. Press and hold the remote control button () for 1 second to activate the large motor vibration function, 10 vibration modes can be selected, press and hold to switch off. 4. Press and hold the remote control button (Wave) for 1 second to activate the small motor vibration function, 10 vibration modes are available. 5. LED status indicator: on status: white light on 6. Low battery (charging reminder): all white lights flashing Charging in progress: white lights cycling flashing Charging complete: all white lights on. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

Dongguan Qianyue Technology Co., Ltd. Model Difference Product Name: Wireless remote control prostate massager Model Number: QY-VB007-26, QY-VB001, QY-VB002, QY-VB007, QY-VB008, QY-VB011, QY-VB013 FCC Identifier: 2A8IX-QYVB00726 All the models are the same circuit and RF module, except the model names. Regards Sincerely Client’s signature Client’s name / title : Youxuemei / Manager Contact information / address: No. 216, Shangkeng East Road, Changping Town, Dongguan City, Guangdong Province

C5266091_X8_Ed.1 1/1 Dongguan Qianyue Technology Co., Ltd. Letter of Authorization Company: Dongguan Qianyue Technology Co., Ltd. Address: No. 216, Shangkeng East Road, Changping Town, Dongguan City, Guangdong Province, China Product Name: Wireless remote control prostate massager Model Number: QY-VB007-26, QY-VB001, QY-VB002, QY-VB007, QY- VB008, QY-VB011, QY-VB013 FCC Identifier: 2A8IX-QYVB00726 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Youxuemei Date: 2022-09-14 Title: Manager Signature of applicant:

Dongguan Qianyue Technology Co., Ltd. 1/1 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2022-09-14 Subject: Request for Confidentiality FCC ID: 2A8IX-QYVB00726 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual No ☐ Internal Photos No ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Youxuemei Title: Manager

Size:10*7mm M/N: QY-VB007-26 FCC ID: 2A8IX-QYVB00726 Label location

433.92 ANT

Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-20220906029E Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 1 of 34 FCC Part 15C Test Report FCC ID: 2A8IX-QYVB00726 Applicant: Dongguan Qianyue Technology Co., Ltd. Address: No. 216, Shangkeng East Road, Changping Town, Dongguan City, Guangdong Province Manufacturer: Dongguan Qianyue Technology Co., Ltd. Address: No. 216, Shangkeng East Road, Changping Town, Dongguan City, Guangdong Province EUT: Wireless remote control prostate massager Trade Mark: N/A Model Number: QY-VB007-26 QY-VB001, QY-VB002, QY-VB007, QY-VB008, QY-VB011, QY-VB013 Date of Receipt: Aug. 27, 2022 Test Date: Aug. 27, 2022 – Sep. 16, 2022 Date of Report: Sep. 16, 2022 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Building C, Shuanghuan, No.8, Baoqing Road, Baolong Industrial Zone, Baolong Street, Longgang District, Shenzhen, Guangdong, China Applicable Standards: FCC PART 15 C 15.231 ANSI C63.10:2013 Test Result: Pass Report Number: DL-20220906029E Prepared (Test Engineer): Pxing Huang Reviewer (Supervisor): Jack Bu Approved (Manager): Jade Yang This test report is based on a single evaluation of one sample of above mentioned products. It is not permitted to be duplicated in extracts without written approval of Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-20220906029E Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 2 of 34 Table of Contents Page 1 . SUMMARY OF TEST RESULTS 4 1.1 MEASUREMENT UNCERTAINTY 4 2 . GENERAL INFORMATION 5 2.1 GENERAL DESCRIPTION OF EUT 5 2.2 DESCRIPTION OF TEST MODES 5 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 6 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 6 2.5 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 6 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 7 3 . EMC EMISSION TEST 8 3.1 CONDUCTED EMISSION MEASUREMENT 8 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 8 3.1.2 TEST PROCEDURE 8 3.1.3 DEVIATION FROM TEST STANDARD 8 3.1.4 TEST SETUP 9 3.1.5 EUT OPERATING CONDITIONS 9 3.1.6 TEST RESULTS 9 3.2 RADIATED EMISSION MEASUREMENT 10 3.2.1 RADIATED EMISSION LIMITS 10 3.2.2 TEST PROCEDURE 11 3.2.3 DEVIATION FROM TEST STANDARD 11 3.2.4 TEST SETUP 12 3.2.5 EUT OPERATING CONDITIONS 13 3.2.6 TEST RESULTS (BETWEEN 9KHZ – 30 MHZ) 14 3.2.7 TEST RESULTS (BETWEEN 30MHZ – 1GHZ) 15 3.2.8 TEST RESULTS (1GHZ~25GHZ) 18 4 . BANDWIDTH TEST 19 4.1 APPLIED PROCEDURES / LIMIT 19 4.1.1 TEST PROCEDURE 19 4.1.2 DEVIATION FROM STANDARD 19 4.1.3 TEST SETUP 19 4.1.4 EUT OPERATION CONDITIONS 19 4.1.5 TEST RESULTS 20 5 . CALCULATION OF AVERAGE FACTOR 21 5.1 APPLIED PROCEDURES / LIMIT 21 5.1.1 TEST PROCEDURE 21 5.1.2 TEST SETUP 21 Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-20220906029E Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 3 of 34 Table of Contents Page 5.1.3 EUT OPERATION CONDITIONS 21 5.1.4 TEST RESULTS 22 6 . DWELL TIME 23 6.1 APPLIED PROCEDURES / LIMIT 23 6.1.1 TEST PROCEDURE 23 6.1.2 DEVIATION FROM STANDARD 23 6.1.3 TEST SETUP 23 6.1.4 EUT OPERATION CONDITIONS 23 6.1.5 TEST RESULTS 24 7 . ANTENNA REQUIREMENT 25 7.1 STANDARD REQUIREMENT 25 7.2 EUT ANTENNA 25 8 . TEST SEUUP PHOTO 26 9 . EUT PHOTO 27 Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-20220906029E Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 4 of 34 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.231) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission N/A 15.209,15.231b Fundamental &Radiated Spurious Emission Measurement PASS 15.231a Dwell time PASS 15.215 20dB Bandwidth PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report 1.1 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2,providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 Conducted Emission Test ±2.56dB 2 RF power,conducted ±0.42dB 3 Spurious emissions,conducted ±2.76dB 4 All emissions,radiated(<1G) ±3.65dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-20220906029E Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 5 of 34 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Product Name: Wireless remote control prostate massager Trademark N/A Model No.: QY-VB007-26 QY-VB001, QY-VB002, QY-VB007, QY-VB008, QY-VB011, QY-VB013 Model Difference All samples are the same except the model name, so we prepare "QY-VB007-26" for test only. Operation Frequency: 433.92MHz Channel numbers: 1 Channels Modulation technology: ASK Antenna Type: Internal Antenna Antenna gain: 0dBi Power supply: DC 3V from battery Note: 1.For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. 2.The EUT’s all information provided by client. 2.2 DESCRIPTION OF TEST MODES Note: (1) New battery is used during the test To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. Pretest Mode Description Mode 1 TX Mode For Conducted & Radiated Emission Final Test Mode Description Mode 1 TX Mode Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-20220906029E Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 6 of 34 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED Radiated Spurious Emission Test 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) The EUT h…

Text truncated - open the document above for the full version.

Product Number: 0315-5502SM Product Name: Antenna Page 1 Version: 1.0 1. Specification A. Electrical Characteristics Frequency 433.92MHz S.W.R. Antenna Gain 0dBi Polarization Impedance B. Material & Mechanical Characteristics Material of Radiator Material of Plastic Cable Type Connector Type Internal Antenna Connector Pull Test Connector Torque Test C. Environmental Operation Temperature - 40 ̊C ~ + 85 ̊C Storage Temperature - 40 ̊C ~ + 85 ̊C N/A N/A N/A N/A N/A N/A Internal Antenna Product Number: 0315-5502SM Product Name: Antenna Page 2 Version: 1.0 4. Antenna - Radiation Pattern Test Data Testing Equipment Specification: Antenna Anechoic Chamber Dimension: 8 x 4 x 4 m Quite Zone: 600mm @1 GHz Isolation: >100dB @ 1 MHz ~ 10 GHz Testing Equipment: Agilent 5071B Received Antenna: 0.7 ~ 6.0 GHz for Gain Calibration Double Ridged Horn Antenna Product Number: 0315-5502SM Product Name: Antenna Page 3 Version: 1.0 5. Mechanical Drawing See attached files 单位 mm

Radiated Measurement Photos