2A8K5-KEEP-UJ-02Smart storage device

Where medication was meant to be. discoverkeep.com Là où les médicaments sont censés être. This product was designed and built in accordance to RoHS directive 2011/65ED and contains no hazardous substance as defined by this directive. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s) and Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC& IC Radiation Exposure Statement: This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Product external dimensions: 287.9X177.87X121.24mm Product inner tub dimensions: 227.83X104.09X80.23mm Weight of product (excluding packaging and power adaptor): 2.05kg discoverkeep.com/support Ce produit a été conçu et fabriqué conformément à la directive RoHS 011/65ED et ne contient aucune substance dangereuse telle que définie par cette directive. Attention: L’utilisateur est averti que les changements ou modifications non expressément approuvés par la partie responsable de la conformité peuvent annuler le droit de l’utilisateur à faire fonctionner l’équipement. Cet appareil contient un (des) émetteur(s)/récepteur(s) exempté(s) de licence qui est (sont) conforme(s) à CNR d’Innovation, Sciences et Développement économique Canada et à la partie 15 des règles du Centre de contrôle des fréquences (FCC). Son fonctionnement est soumis aux deux (2) conditions suivantes : (1) Cet appareil ne doit pas produire d’interférences. (2) Cet appareil doit accepter tout type d’interférences, notamment les interférences pouvant provoquer une utilisation non désirée de l’appareil. Remarque: Cet équipement a été testé et déclaré conforme aux limites imposées aux appareils numériques de classe B, conformément à la partie 15 des règles de la FCC. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet équipement génère, utilise et peut émettre des fréquences radio et, s’il n’est pas installé et utilisé conformément aux instructions, peut causer des interférences nuisibles aux communications radio. Cependant, il n’y a aucune garantie que des interférences ne se produiront pas dans une installation particulière. Si cet équipement provoque des interférences nuisibles à la réception de la radio ou de la télévision, ce qui peut être déterminé en éteignant et en rallumant l’équipement, l’utilisateur est encouragé à essayer de corriger les interférences en prenant une ou plusieurs des mesures suivantes: -- Réorientez ou déplacez l’antenne de réception. -- Augmentez la distance entre l’équipement et le récepteur. -- Branchez l’équipement sur une prise de courant d’un circuit différent de celui où le récepteur est branché. -- Consultez le revendeur ou un technicien radio/ télévision expérimenté pour obtenir de l’aide. Énoncé sur l’exposition aux radiations de la FCC et de l’IC: Cet appareil est conforme aux limites d’exposition aux radiations établies par la FCC et le Canada dans un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps. Cet émetteur ne doit pas être installé ou fonctionner en conjonction avec une autre antenne ou un autre émetteur. Dimensions externes du produit: 287,9 X 177,87 X 121,24 mm Dimensions intérieures du produit: 227,83 X 104,9 X 80,23 mm Poids du produit (sans l’emballage et l’adaptateur électrique): 2,05 kg discoverkeep.com/support 12 4 Place your KEEP on a level surface where it’s easy to reach. Placez votre boîte KEEP sur une surface plane où elle sera facilement accessible. Download the KEEP companion app. Téléchargez l’appli KEEP. Connect the box to a power supply using the USB-C cable provided. Connectez la boîte à une source d’alimentation à l’aide du câble USB-C fourni. Create an account to connect to your device. Créez un compte pour vous connecter à votre appareil. Follow the instructions in the app to open/close your device or add a medication schedule. Suivez les instructions dans l’application pour ouvrir/fermer votre appareil, ou ajouter un calendrier de prise de médicaments. 56 Please wait (up to 3 mins) to see the words “SET UP” on the front of your device. Veuillez pa…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name KEEP Labs Inc Address 200 Cambria St Stratford, N5A1H8, Canada Grantee Code 2A8K5 FCC ID 2A8K5-KEEP-UJ-02 Authorized Contact Name Ivan Mun Contact Email [email protected] Contact Phone +1 (647) 987-3547 I, th e undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1)labeling the equipment with the exact FCC ID as specified in this application, (2)compliance statement labeling pursuant to the applicable rules, (3)compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensur e th at production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept t hat they are the responsible party and agree to abide by t heir responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements . (1 )the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2)the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3)the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS , FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)nei ther the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has r ead, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions . Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List KEEP Labs Inc (“ the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. KEEP Labs Inc ( “the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, esta blished pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 3/7/2023 Print Name: Ivan Mun Title: Global Head of Manufacturing and Operations *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

KEEP Labs Inc U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: United Consulting Technology Services Co., Ltd. FRN: 0033495714 Contact Name: David Wu Street Address: 17800 CASTLETON ST STE 665 CITY OF INDUSTRY CA 91748 United States Tel ephone No : (626) 217-4022 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: 3/7/2023 Signed by (Printed Name/Title): David Wu /CEO The Applicant ackn owledges that they must maintain an agent for no less than one year after terminating all marketing and i mportation O R t he c onclusion o f any Commission-related pro ceeding involving the equipment. The a pplicant further acknowledges their responsibility to i nform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: KEEP Labs Inc Grantee Code: 2A8K5 FCC ID: 2A8K5-KEEP-UJ-02 Contact Name: Ivan Mun Street Address: 200 Cambria St City/Province/Zip: Stratford/-/N5A1H8 Telephone No: +1 (647) 987-3 547 Email: [email protected] Applicant Signature: Date : 3/7/2023 Signed by (Printed Name/Title): Ivan Mun/Global Head of Manufacturing and Operations

KEEP Labs Inc Confidential letter FCC To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: KEEP Labs Inc 200 Cambria St Stratford, N5A1H8, Canada Regarding: Confidentiality Request regarding application for FCC ID: 2A8K5-KEEP-UJ-02 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Name (Printed): Ivan Mun Title: Global Head of Manufacturing and Operations Signature: On behalf of Company: KEEP Labs Inc

AuthorCheckedApproved Description Reference to Spec P/N : Release No. Tooling P/N Part / Dwg No. CONFIDENTIAL : This drawing is confidential and proprietary to Aztech. Reproduction in whole or in part is prohibited without the written consent of Aztech. All material used shall comply with the RoHS Directive, 2011/65/EU & (EU)2015/863 Part Drawing Title Block (A4) - ID/Packaging Form #: 16-2 (QP-4.5-1) Rev. No.DateRemarks 12-Apr-2023 1.0 Song Ren Zhi STKR SEMI FOR KEEP PRODUCTS 141.5X83.5MM V1.1 Remark: 1) Size 141.5X83.5mm; 2) printing : 2) Tolerance +/- 0.2mm 4)MATERIAL: 50# Gloss Wihte PET(Polyethylene Terephthalate) Marked with "*" as the key size Kevin 边距、行距、间距为3mm 卷装直径<240MM 出 纸 方 向 *83.5MM *141.5MM KEP-LG010001-OP Merita 2 Product Description KEEP Labs Inc. Item Code : Smart Storage Device : KLB-KEEP-UJ-02 : QC2.0/QC3.0, 5-12V, 30W MAX : 29145-KEEPUJ02 : 2A8K5-KEEP-UJ-02 Power Input IC FCC ID Designed in North America Made in China This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3(B)/NMB-3(B) US 802086 R 日期格式年+周 红内容为AZ工厂打印(Red content is printed by AZ factory) 此处”Device ID:KEEPe97e”“e97e”对应PCBA上 SN左边第3位~第6位数的内容,且此每个SN变动 2D码中的内容还是18位的SSID号， 例如PCBA SSID SN:xxe97exxxxxxxxxxxx 那么这个2D码与主板上的SSID保持一致。 Date Code:YYWW Device ID:KEEPe97e Label and location：

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 1 of 8 Appendix Internal Photos for GZCR2303000211AT Test Model No.: KLB-KEEP-UJ-02 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 2 of 8 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 3 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 4 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 5 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 6 of 8 Wi-Fi & Bluetooth ANT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 7 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 8 of 8

PRODUCT SPECIFICATION R EVISION: ECR /ECN INFORMATION: T ITLE: 2 .4GHZ MID SMT Antenna Product Specification S HEET No. F EC No: 637 286 1 o f 10 D ATE: 20 20/05/11 DOCUMENT NUMBER: C REATED / REVISED BY: C HECKED BY: APPR OVED BY: P S -4 7948 000 1 K ang Cheng 2020/05/11 Cooper Zhou 2020/05/11 S tary Song 2020/05/11 TE MPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC T ITLE 2. 4GHZ MID SMT ANTENNA TA BLE OF CONTENTS 1.0 SCOPE 2.0 PRODUCT DESCRIPTION 3.0 APPLICABLE DOCUMENTS 4.0 GENERAL SPECIFICATION 5.0 ANTENNA SPECIFICATION 6.0 MECHANICAL REQUIREMENTS 7.0 ENVIRONMENTAL SPECIFICATION 8.0 RECOMMENDED REFLOW CONDITION 9.0 RECOMMENDED FOOTPRINT ON PCB FOR SOLDERING 10.0 PACKING Molex Interconnect (Shanghai) Co Ltd 889 Ying Lun Road, WaiGaoQiao Free Trade Zone PRODUCT SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 2.4GHZ MID SMT Antenna Product Specification SHEET No. F EC No: 637286 2 of 10 DATE: 2020/05/11 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-479480001 Kang Cheng 2020/05/11 Cooper Zhou 2020/05/11 Stary Song 2020/05/11 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC 2.4GHZ MID SMT ANTENNA 1.0 SCOPE This product specification covers the mechanical, electrical and environmental performances specification for 2.4GHz MID SMT antenna. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER (S) Product name: 2.4GHz MID SMT antenna Series Number: 479480001 2.2 DESCRIPTION This is a high-performance antenna implemented using SMD option to meet the customer needs. It has low profile as the size of this antenna. It is designed to cover the frequency 2.4GHz-2.5GHz. 2.3 FEATURES l 2.4GHz, monopole, l SMT embedded, PCB corner mounting l High efficiency over 70% on 2.4-2.5GHz l Antenna size 3x4x4mm l RoHS Compliant ANTENNA PICTURE PRODUCT SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 2.4GHZ MID SMT Antenna Product Specification SHEET No. F EC No: 637286 3 of 10 DATE: 2020/05/11 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-479480001 Kang Cheng 2020/05/11 Cooper Zhou 2020/05/11 Stary Song 2020/05/11 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC 2.4 PRODUCT STRUCTURE INFORMATION P/N 479480001 MECHANICAL STRUCTURE INFORMATION FOR 479480001 PRODUCT SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 2.4GHZ MID SMT Antenna Product Specification SHEET No. F EC No: 637286 4 of 10 DATE: 2020/05/11 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-479480001 Kang Cheng 2020/05/11 Cooper Zhou 2020/05/11 Stary Song 2020/05/11 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC 3.0 APPLICABLE DOCUMENTS DOCUMENT NUMBER DESCRIPTION Sale Drawing (SD) SD-479480001 Mechanical Dimension of the product Application Guide (AS) AS-479480001 Antenna Application and surrounding Packing Drawing (PK) PK-479480001 Product packaging specifications 4.0 GENERAL SPECIFICATION PRODUCT NAME 2.4GHZ MID SMT antenna PART NUMBER 479480001 FREQUENCY RANGE (+/-3MHz) 2.4~2.5GHz POLARIZATION Linear IMPEDANCE WITH MATCHING 50 Ohms OPERATION TEMPERATURE -40 °C to 85 °C STORAGE TEMPERATURE -40 °C to 85 °C AVERAGE TOTAL EFFICIENCY >70% RF POWER 2 Watts NET WEIGHT 0.042g/PCS ANTENNA TYPE Plastics *If you plan to re-use the products that be taken out from packaging. Suggest to repacked them within 48 hours by re-seal to prevent oxidation! PRODUCT SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 2.4GHZ MID SMT Antenna Product Specification SHEET No. F EC No: 637286 5 of 10 DATE: 2020/05/11 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-479480001 Kang Cheng 2020/05/11 Cooper Zhou 2020/05/11 Stary Song 2020/05/11 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC 5.0 ANTENNA SPECIFICATION All measurements are done of the antenna mounted on reference PCB (100*40*0.8mm Molex p/n:479489001) with VNA Agilent E5071C and Over-The-Air (OTA) chamber. DESCRIPTION EQUIPMENT REQUIREMENT Frequency Range VNA E5071C 2.4~2.5GHz Return Loss VNA E5071C < -6 dB Peak Gain (Max) OTA Chamber 3.7dBi Average Total Efficiency OTA Chamber >70% Polarization OTA Chamber Linear Input Impedance VNA E5071C 50 Ohms Note that the above antenna performance is measured with just the antenna mounted on a recommended PCB to similar a free-space condition. When implement into the system, the frequency resonant might be off-tune due to the loading of surrounding components especially metal plane. This off-tune can be compensated through matching. Although module manufacturers specify a peak gain limit, it is based on free-space conditions. The peak gain will be degraded by 1 to 2dBi in the actual implementation as the radiation pattern will change due to the surround components. As such, during selection of antenna, you can select one with high peak gain to compensate for the loss. Molex can offer assistant to choose the best location and best tuning in-order to meet this peak gain requirement. PRODUCT SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 2.4GHZ MID SMT Antenna Product Specification SHEET No. F EC No: 637286 6 of 10 DATE: 2020/05/11 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-479480001 Kang Cheng 2020/05/11 Cooper Zhou 2020/05/11 Stary Song 2020/05/11 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC 6.0 MECHANICAL REQUIREMENTS DESCRIPTION SPECIFICATION Shear Force Apply three axial peeling force on parts soldered on the PCB at the speed rate of 25±3 mm/minute. Shear force:15N Min. Solder-Ability Test Dip solder pad in flux then immerse in solder bath at 245+/-50°C for 4~5seconds,95% of immersed area mush show no voids 7.0 ENVIRONMENTAL SPECIFICATION DESCRIPTION SPECIFICATION Temperature Cycling Test 1. The device under test is kept for 30 mins in an environment with a temperature of -40 °C. 2. Kept for 4 Hours in an environment with a temperature of 85 degrees. 3. Kept for 2 Hours in an environment with a temperature of 125 degrees. 4. The cycle is repeated until a total of 40 cycles have been completed. Hereafter the conditions are stabilized at …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR230300021103 Page: 1 of 9 FCC ID: 2A8K5-KEEP-UJ-02 Ricky Liu Manager RF EXPOSURE EVALUATION REPORT Application No.: GZCR2303000211AT Applicant:KEEP Labs Inc. Address of Applicant:200 Cambria St, Stratford, ON, N5A1H8, Canada Manufacturer:KEEP Labs Inc. Address of Manufacturer:200 Cambria St, Stratford, ON, N5A1H8, Canada Factory:Aztech Communication Device (DG) Ltd Address of Factory:Jiu Jiang Shui Village, Chang Ping Town Dongguan City 523588 Guangdong P.R. China Equipment Under Test (EUT): EUT Name:Smart storage device Model No.: KLB-KEEP-UJ-01, KLB-KEEP-UJ-02   Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. Trade Mark:KEEP Standard(s) : 47 CFR Part 1.1310 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2023-03-01 Date of Evaluation: 2023-03-21 Date of Issue: 2023-04-20 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR230300021103 Page: 2 of 9 Revision Record VersionReport No.DateRemark 01GZCR2303000211032023-04-20Original Authorized for issue by: Kevin Zhang/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR230300021103 Page: 3 of 9 2Evaluation Summary ItemStandardMethodRequirementResult RF Exposure KDB447498D01 General RF Exposure Guidance v06 KDB447498D01 General RF Exposure Guidance v06 47 CFR Part 1.1310Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section.  Declaration of EUT Family Grouping: Model No.: KLB-KEEP-UJ-01, KLB-KEEP-UJ-02 According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference on shell color. Only the model KLB-KEEP-UJ-02 was tested. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR230300021103 Page: 4 of 9 3Contents Page 1Cover Page...............................................................................................................................................1 2Evaluation Summary................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................5 4.1Details of E.U.T.................................................................................................................................5 4.2Evaluating Location...........................................................................................................................5 4.3Facility...............................................................................................................................................6 4.4Deviation from Standards..................................................................................................................6 4.5Abnormalities from Standard Conditions...........................................................................................6 5Technical Requirements Specification..................................................................................................7 5.1General Description of Applied Standards........................................................................................7 5.2RF Exposure Evaluation....................................................................................................................7 5.2.1Limit & Test Method......................................................................................................................7 5.2.2Conclusion....................................................................................................................................8 6EUT Constructional Details (EUT Photos).............................................................................................9 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR230300021103 Page: 5 of 9 4General Information 4.1Details of E.U.T. Power supply:AC 100-240, 50/60Hz Power Supply Model: TYPE-C301D Input: AC 100-240, 50/60Hz Output: PD: 5V--3A / 9V--3A / 12V--2.5A / 15V--2A / 20V--1.5A MAX 30W Cable(s):Output cable (unshielded, 80cm) Type-c port RF CharactersRefer to report GZCR230300021102 4.2Evaluating Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555Fax: +86 20 82075059 No tests were sub-contracted. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR230300021103 Page: 6 of 9 4.3Facility The facility is recognized, certified, or accredited by the following organizations: ● ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the Australian/New Zealand Regulatory Compliance Mark (RCM). ● SGS UK(Certificate No.: 32), SGS-TUV SAARLAND and SGS-FIMKO Have approved SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory as a supplier of EMC TESTING SERVICES and SAFETY TESTING SERVICES. ● FCC Recognized Accredited Test Firm(Registration No.: 486818) SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been accredited and fully descri…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR230300021102 Page: 1 of 135 FCC ID: 2A8K5-KEEP-UJ-02 Ricky Liu Manager TEST REPORT Application No.: GZCR2303000211AT Applicant: KEEP Labs Inc. Address of Applicant: 200 Cambria St, Stratford, ON, N5A1H8, Canada Manufacturer: KEEP Labs Inc. Address of Manufacturer: 200 Cambria St, Stratford, ON, N5A1H8, Canada Factory: Aztech Communication Device (DG) Ltd Address of Factory: Jiu Jiang Shui Village, Chang Ping Town Dongguan City 523588 Guangdong P.R. China Equipment Under Test (EUT): EUT Name: Smart storage device Model No.: KLB-KEEP-UJ-01, KLB-KEEP-UJ-02   Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. Trade Mark: KEEP Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2023-03-01 Date of Test: 2023-03-16 to 2023-03-21 Date of Issue: 2023-04-20 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR230300021102 Page: 2 of 135 Revision Record Version Report No. Date Remark 01 GZCR230300021102 2023-04-20 Original Authorized for issue by: Kevin Zhang/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR230300021102 Page: 3 of 135 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.2 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section.  Declaration of EUT Family Grouping: Model No.: KLB-KEEP-UJ-01, KLB-KEEP-UJ-02 According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference on shell color. Only the model KLB-KEEP-UJ-02 was tested in this report. SGS-CSTC Standards Technical …

Text truncated - open the document above for the full version.