2A8L4-ZUnplug TV box

Specification For Urquhart box About Use this manual as a guide for application. The photographs, graphics, charts and illustrations and other information are only for the purpose of interpretation and illustration. If there is difference, please refer to the actual product. Due to product version upgrade or other needs, we may update this manual. If the latest version manual is needed, please contact our after sales service. Declaration of liability To the fullest extent permitted by law, the products described in this manual(including their hardware, software, firmware, etc.) are provided as the product. We make no warranties of any kind/express or implied, including but not limited to warranties of merchantability, satisfactory quality, fitness for a particular purpose, non-infringement of third party rights, etc.; nor shall it be liable for any special ,incidental, incidental or consequential damages arising out of the use of our products, including, but not limited to, damages arising for loss of business profits, loss of data or documentation. With respect to the use of internet access products (devices that support network connectivity), the use of the products is at your own risk. The Company shall not be liable for any abnormal operation, privacy leak or other damage caused by cyber-attacks, hacker attacks, virus detection or other Internet security risks; If required, we will provide timely technical support. Regulatory legal means are influenced by jurisdictions. Before using this product, please check all relevant laws in your jurisdiction to ensure that your use confirms applicable law. The Company shall not be liable if this product is used in conjunction with an illegal product or for other improper purposes such as infringing the rights of third parties. In the event of a conflict between the contents of this manual and applicable law, the provisions of the law shall prevail. Overview "Urquhart box" aims to provide a set-top box colored light bar capable of independent integrated control to solve the problems introduced in the background of the related technology. With the development of science and technology, people’s requirements for material life become higher and higher, especially electronic products can facilitate people’s life and improve the quality of entertainment and cultural life. Of course, the prices of electronic products vary according to their different functions and quality. In order to improve the visual experience, colored light bars are installed on the television bodies of some branded televisions, the colored light bars are connected with control units of the television bodies, and the video display effect is improved through HDMI output so as to set off the atmosphere. However, in order to save production costs, colored light bars are not installed on relatively cheap televisions. According to the existing technology, colored light bars independently controlled by independent control units can hardly be used to match video display, the effect of setting off perfect atmosphere cannot be achieved, and the use requirements of users cannot be met. Therefore the set-top box colored light bar capable of independent integrated control is designed and produced so as to solve the above problems. Features 1,Immersive entertainment experience：When you are playing a game on TV，the ambient lighting reacts to the content onscreen in real time,Bringing you a perfect immersion home entertainment experience,you can use as living room decor/gaming room decor to enhance your gaming experience or party ambience. 2. Smart dynamic light effect：The LED light strip consisting of RGBIC light beads.The smart chip in the sync box will recognize the colors on your TV screen,then accurately reflected in your TV's surround lighting，and track the content changes onscreen in real time,to bring you an immersive visual enjoyment and a fancy lighting experience. 3. Easy to install and use：We have 3 sizes of strip light versions ,to meet different TV sizes.Light strips with adhesive can be quickly and firmly installed on all four sides of the behind of your TV，and no camera and no calibration required,the whole installation process takes no more than 10 minutes.On the sync box we have 1 physical buttons for your basic functions,or use the app to get more. 4. High Compatibility:The sync box works with your gaming consoles/set-top boxes/streaming dongles or other HDMI devices such as ps5 or ps4, Xbox, switch,n64, wii,Amazon Fire Stick, Apple TV,etc. 5. Personalized APP settings:The Urquhart+ app links with Urquhart box by Bluetooth. Through the app, you can adjust the position of the color pickup onscreen to better suit different TV images，Except for the video mode, It also provide 6 ambience modes to customize colors, brightness, and flashing patterns，helping create the different ambiance Composition Specification Model Item Size（unit : mm） Project X LED TV backlight 109(L)×102(W)×19(H) Scenarios This product could be used in living room, bedroom and gaming room Performance Product Name LED TV backlight Model Project-Z Interface HDMI Out Video Output Type-C Interface Connect the RGB LED light bar Power Connector DC 12v/2A,3A,4A HDMI In HD audio and video input Light Strip Model 01.08.1405 Light strip Light bead type 02-SK6812-001 Video Decoding 5V Maximum power 24W/36W/50W Applicable TV size 55” Video output resolution HEVC MP 4K(3840x2160@60fps) HDR 4K(3840x2160@60fps) MPEG-4 SP/ASP 4K(3840x2160@60fps) DIVX 3/4/5/6/HD, XVID 4K@60fps Audio and video codec parameters 1-channel video decoding Support,One channel 4K(3840x2160@60fps) 3D Video Support Video Encoding HDCP 1.4/2.2/2.3 4K(3840x2160@60fps) HDMI2.0b, HDMI1.4b HDR10/HDR12/Dolby Vision/HLG Size L： 109 mm, W： 50 mm, H：19 mm Box Net weight 150g Input Voltage AC 100—240V, 50Hz/60Hz Other parameters Power consumption Average working power consumption≤5W Standby power consumption≤2W Environment Temperature 0 〜40 °C Environment Humidi…

Text truncated - open the document above for the full version.

Shenzhen Unplug Optoelectronic Technology Co.,LTD 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Shenzhen Unplug Optoelectronic Technology Co.,LTD Address: 1321, No.5 Golf Avenue, Guanlan street., Longhua District, Shenzhen, China Product Name: Unplug TV box FCC ID: 2A8L4-Z Model(s): Project-Z 2.911(d)(5)(i) Equipment Type We,Shenzhen Unplug Optoelectronic Technology Co.,LTD. (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Ergang Wen Date: 7/8/2023 Title: General Manger Company name: Shenzhen Unplug Optoelectronic Technology Co.,LTD. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Unplug Optoelectronic Technology Co.,LTD 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Shenzhen Unplug Optoelectronic Technology Co.,LTD Address: 1321, No.5 Golf Avenue, Guanlan street., Longhua District, Shenzhen, China Product Name: Unplug TV box FCC ID: 2A8L4-Z Model(s): Project-Z 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Unplug Optoelectronic Technology Co.,LTD.] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Ergang Wen Date: 7/8/2023 Title: General Manger Company name: Shenzhen Unplug Optoelectronic Technology Co.,LTD. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

JOC Australia Inc * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter 7/8/2023 ATTN.: Reviewing Engineer FCC ID: 2A8L4-Z Per section 2.911(d)(7) of the FCC rules, Shenzhen Unplug Optoelectronic Technology Co.,LTD (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: JOC Australia Inc Physical U.S. Company Address: 18351 Colima Road Ste 585 Rowland Heights, California, 91748 United States of America Agent contact name/Title : Benjamin. Smith/Vice President Agent Email Address: [email protected]/[email protected] Tel No.: +1(626) 217 4778 FRN No.: 0033379421 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Agent Signed (if different to Applicant): Signed: Signed: Printed name: Ergang Wen Printed name: Benjamin. Smith Title: General Manger Title: Vice President Company Name: Shenzhen Unplug Optoelectronic Technology Co.,LTD Company Name: JOC Australia Inc Date: 7/8/2023 Date: 7/11/2023

Shenzhen Unplug Optoelectronic Technology Co.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-07-08 Subject; Request for Long Term Confidentiality FCC ID: 2A8L4-Z To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description Tune-up Procedure SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Signature: July 8, 2023 Name Ergang Wen Position General Manger Company Name Shenzhen Unplug Optoelectronic Technology Co.,LTD Address 1321, No.5 Golf Avenue, Guanlan street., Longhua District, Shenzhen, China Tel +86 186 7906 8310 Fax / Email [email protected]

Shenzhen Unplug Optoelectronic Technology Co.,LTD Letter of Authorization Company: Shenzhen Unplug Optoelectronic Technology Co.,LTD Address: 1321, No.5 Golf Avenue, Guanlan street., Longhua District, Shenzhen, China Product Name: Unplug TV box Model Number(s): Project-Z We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: July 8, 2023 Name Ergang Wen Position General Manger Company Name Shenzhen Unplug Optoelectronic Technology Co.,LTD Address 1321, No.5 Golf Avenue, Guanlan street., Longhua District, Shenzhen, China Tel +86 186 7906 8310 Fax / Email [email protected]

FCC ID: 2A8L4-Z

Size: 3.0cm *1.5cm Label Location FCC ID: 2A8L4-Z Unplug TV box Model No.: Project-Z

FCC ID: 2A8L4-Z BT ANT

FCC ID: 2A8L4-Z Prediction of MPE at a given distance 1. Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) 2. Test Procedure Equation from page 18 of OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to the antenna G = numeric gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna FCC ID: 2A8L4-Z 3. Result Mode Frequency (MHz) Prediction distance (cm) Rated Peak RF power output MPE (mW/cm 2 ) Limit (mW/cm 2 ) SAR Test Exclusion dBm mW BT LE 2402-2480 20 0.3 1.0715 0.0004 1 Yes BT Antenna Gain: 2.48dBi, 1.77(numeric) Then SAR evaluation is not required.

ALPHA's reports is using a digital certificate that is trusted on Adobe's official server. If there is no digital certificate or the digital certificate shows damaged in your report. Please do not accept the report. E-mail: [email protected] Tel: 400-8300-895 Website: http://www.a-lab.cn FCC TEST REPORT FCC ID: 2A8L4-Z On Behalf of Shenzhen Unplug Optoelectronic Technology Co.,LTD Unplug TV box Model No.: Project-Z Prepared for : Shenzhen Unplug Optoelectronic Technology Co.,LTD Address : 1321, No.5 Golf Avenue, Guanlan street., Longhua District, Shenzhen, China Prepared By : Shenzhen Alpha Product Testing Co., Ltd. Address : Building i, No.2, Lixin Road, Fuyong Street, Bao'an District, 518103, Shenzhen, Guangdong, China Report Number : A2305256-C01-R01 Date of Receipt : June 19, 2023 Date of Test : June 19, 2023- July 6, 2023 Date of Report : July 6, 2023 Version Number : V0 Page 2 of 58 Report No.: A2305256-C01-R01 TABLE OF CONTENTS Description Page 1. Summary of Standards And Results --------------------------------------------------------------------------- 6 1.1. Description of Standards and Results -------------------------------------------------------------------- 6 2. General Information -------------------------------------------------------------------------------------------------- 7 2.1. Description of Device (EUT) -------------------------------------------------------------------------------- 7 2.2. Accessories of Device (EUT) ------------------------------------------------------------------------------- 8 2.3. Tested Supporting System Details ------------------------------------------------------------------------ 8 2.4. Block Diagram of connection between EUT and simulators ---------------------------------------- 8 2.5. Test Mode Description ---------------------------------------------------------------------------------------- 8 2.6. Test Conditions ------------------------------------------------------------------------------------------------- 8 2.7. Test Facility ------------------------------------------------------------------------------------------------------ 9 2.8. Measurement Uncertainty ----------------------------------------------------------------------------------- 9 2.9. Test Equipment List ----------------------------------------------------------------------------------------- 10 3. Spurious Emission ------------------------------------------------------------------------------------------------- 11 3.1. Test Limits ----------------------------------------------------------------------------------------------------- 11 3.2. Test Procedure ----------------------------------------------------------------------------------------------- 13 3.3. Test Setup ----------------------------------------------------------------------------------------------------- 14 3.4. Test Results --------------------------------------------------------------------------------------------------- 16 4. Power Line Conducted Emission ------------------------------------------------------------------------------ 27 4.1. Test Limits ----------------------------------------------------------------------------------------------------- 27 4.2. Test Procedure ----------------------------------------------------------------------------------------------- 27 4.3. Test Setup ----------------------------------------------------------------------------------------------------- 27 4.4. Test Results --------------------------------------------------------------------------------------------------- 27 5. Conducted Maximum Output Power ------------------------------------------------------------------------- 30 5.1. Test limits ------------------------------------------------------------------------------------------------------ 30 5.2. Test Procedure ----------------------------------------------------------------------------------------------- 30 5.3. Test Setup ----------------------------------------------------------------------------------------------------- 30 5.4. Test Results --------------------------------------------------------------------------------------------------- 30 6. Peak Power Spectral Density ----------------------------------------------------------------------------------- 31 6.1. Test limits ------------------------------------------------------------------------------------------------------ 31 6.2. Test Procedure ----------------------------------------------------------------------------------------------- 31 6.3. Test Setup ----------------------------------------------------------------------------------------------------- 31 6.4. Test Results --------------------------------------------------------------------------------------------------- 31 7. Bandwidth ------------------------------------------------------------------------------------------------------------- 35 7.1. Test limits ------------------------------------------------------------------------------------------------------ 35 7.2. Test Procedure ----------------------------------------------------------------------------------------------- 35 7.3. Test Setup ----------------------------------------------------------------------------------------------------- 35 7.4. Test Results --------------------------------------------------------------------------------------------------- 35 8. Band Edge Check --------------------------------------------------------------------------------------------------- 42 8.1. Test limits ------------------------------------------------------------------------------------------------------ 42 8.2. Test Procedure ----------------------------------------------------------------------------------------------- 42 8.3. Test Setup ----------------------------------------------------------------------------------------------------- 42 8.4. Test Results --------------------------------------------------------------------------------------------------- 42 9. Frequency stability --…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2360750-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Shenzhen Unplug Optoelectronic Technology Co., LTD Address: 15E-1, No. 5 Golf Avenue, Guanlan Street, Longhua District, Shenzhen, China Equipment Type: Unplug TV box RF Ant Model Name: Project-Z Brand Name: N/A Test Standard: IEEE Std 149-2021 Sample Arrival Date: Jun. 16, 2023 Test Date: Jun. 16, 2023 Date of Issue: Jun. 26, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Mai Jintian Checked by: Zou Liu Approved by: Tolan Tu (Testing Director) _______________ _______________ _______________ Report No.: BL-SZ2360750-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Jun. 26, 2023 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 3 1.1 Test Laboratory ..................................................................................................................... 3 1.2 Test Location ......................................................................................................................... 3 2 PRODUCT INFORMATION ......................................................................................................... 4 2.1 Applicant Information ............................................................................................................ 4 2.2 Manufacturer Information ...................................................................................................... 4 2.3 General Description for Equipment under Test (EUT) .......................................................... 4 2.4 Ancillary Equipment .............................................................................................................. 4 2.5 Technical Information ............................................................................................................ 4 3 SUMMARY OF TEST RESULTS ................................................................................................. 5 3.1 Test Standards ...................................................................................................................... 5 3.2 Test Verdict ........................................................................................................................... 5 3.3 Test Uncertainty .................................................................................................................... 5 4 GENERAL TEST CONFIGURATIONS ........................................................................................ 6 4.1 Test Condition ....................................................................................................................... 6 4.2 Test Equipment List .............................................................................................................. 6 4.3 Test Setup ............................................................................................................................. 7 ANNEX A TEST RESULTS ............................................................................................................. 8 A.1 Gain and Efficiency ............................................................................................................... 8 A.2 VSWR ................................................................................................................................... 9 ANNEX B RADIATION PATTERN ................................................................................................ 10 ANNEX C TEST SETUP PHOTOS ............................................................................................... 13 ANNEX D EUT PHOTO ................................................................................................................ 13 Report No.: BL-SZ2360750-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Report No.: BL-SZ2360750-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Shenzhen Unplug Optoelectronic Technology Co., LTD Address 15E-1, No. 5 Golf Avenue, Guanlan Street, Longhua District, Shenzhen, China 2.2 Manufacturer Information Manufacturer Shenzhen Unplug Optoelectronic Technology Co., LTD Address 15E-1, No. 5 Golf Avenue, Guanlan Street, Longhua District, Shenzhen, China 2.3 General Description for Equipment under Test (EUT) EUT Name Unplug TV box RF Ant Model Name Under Test Project-Z Antenna Ty…

Text truncated - open the document above for the full version.

FCC ID: 2A8L4-Z 1.1. Photos of Radiated emission 1.2. Photos of Conducted Emission test