2A8LI-XG-01Web video camera

(EN/DE/FR/IT/ES) USERS MANUAL FOR XEGA BATTERY SECURITY CAMERA SCSMS-20220913 English (1~15) Contents Deutsch (16~30) Français (31~45) Italiano (46~60) Español (61~75) Thank you for choosing XEGA products. tĞĂƌĞĐŽŵŵŝƩĞĚƚŽƉƌŽǀŝĚŝŶŐƚŚĞďĞƐƚƐĞƌǀŝĐĞƚŽĂůůŽƵƌ customer. If anything has happened to your prŽĚƵĐƚ͕ƉůĞĂƐĞcontact ƵƐĨŽƌĂůŝĨĞƟŵĞǁĂƌƌĂŶƚLJ͘ EͲŵĂŝů͗ƐĞrǀŝĐĞΛxegatech.com WeďsitĞ͗ǁǁǁ.x egatech.com XEGA XEGA Claim Your Lifetime Warran ty I. Product introduction (01) Table of Contents 2. Download and registration of APP on mobile phone (01~02) 3. Camera connection (03~06) 4. Buttons (06~12) 5. Setting interface 6. Cloud video interface 7. Common problems (1 2~13) (13) (14~15) I. Product introduction II. Download and registration of APP on mobile phone Recommended installation method It is suggested to install the camera at a height of about 2.6m and with an inclination angle of 15°to 30°(manually adjustable according to the real-time view in the APP on your mobile phone to focus on the motion detection areas to capture the trigger monitions more accurately). 1. Download Please find the “UBox” APP in the Google Play Store or App Store on your mobile phone, or scan the following QR code, or going to the following link and download and install it. -01- http://app.ubianet.com/app/ubox/ 2.Account registration (1) Open the APP, choose the region where you are and register an account with a mobile phone number or e-mail address. It is suggested to verify the account through an e-mail address for purpose of password retrieving (Fig. 1). (2) Set and note down a password consisting of 8 to 32 digits or letters for the account (Fig. 2). (3) In any access in “UBox” APP download and account setting, please click “Permit” or “Agree” to enable the APP to have access to your camera and mobile phone. If not so, your camera may have insufficient functions or incomplete settings. -02- (Fig. 1) (Fig. 2) Step 1: Prepare 1. After long-time transportation, the battery level of the camera may decrease. Please charge the camera via a 5V charger or a computer USB interface before using it. When in charging, the LED indicator on the camera is red. 2. After the camera is fully charged, power it on. After the LED indicator close to its lens is lit, press the reset button for 8 seconds. A prompt tone suggests successful reset. 3. Enter the setting interface of your mobile phone and click the WiFi of your home in the WiFi list. Step 2: Connect the camera. 1. Enter “UBox APP”, click “Add a device” to enter the device list (Fig. 3). Choose “Setup WiFi Device” (Fig. 4). 2. Check whether the LED indicator close to the lens is flashing. If it is, click “Yes” to enter the device information interface (Fig. 5). 3. Set name of the camera, or use its default name and then click “Next” (Fig. 6). III. Camera connection Please realize access to videos by scanning the following QR code with your mobile phone or through the following link. -03- How to set up wifi through scanning QR code for S50 How to set up WIFI via sound wave pairing for S50 https://youtu.be/9Xbw-_dIBv0https://youtu.be/DsixI0dSako Step 3: Choose the method of camera network configuration. 1. Through a QR code After entering the WiFi network setting interface, the APP will display name of the WiFi network connected because your mobile phone has connected to the WiFi network of your home. Just enter the WiFi password and confirm it and then click “QR code configuration”. (Fig. 7) The APP will generate a QR code automatically. Have the QR code on your mobile phone point at the lens of the camera (distance: about 15cm) for identification. When there is a prompt tone given by the camera, it suggests that the QR code scanning has succeeded and the camera has been connected to the APP automatically. Note: If camera connection fails, try as below. 1. Check the battery level of the camera is sufficient, power on the camera, press and hold the reset button for 10 seconds and then release it for camera connection. 2. Through a sound wave After entering the WiFi network setting interface, the APP will display name of the WiFi network connected because your mobile phone has connected to the WiFi network of your home. Just enter the WiFi password and confirm it and then click “Sound wave configuration”.(Fig. 7) The APP on our mobile phone will then send a sound wave automatically (you can volume up your mobile phone for better configuration). Put your mobile phone by the camera for sake of its reading. When there is a prompt tone given by the camera, it suggests that the sound wave reading has succeeded and the camera has been connected to the APP automatically. -04- 2. Check whether the WiFi password of your home is longer than 31 characters and make sure there is no special character such as “?!”, or “&,.”. It is suggested to use a combination of digits and letters. 3. For camera network configuration failure or any other problem, please contact us through our e-mail address ([email protected]). We will give a reply within 24 hours. (Fig. 3) (Fig. 4) (Fig. 5) -05- (Fig. 6) (Fig. 7) IV . Buttons 1. Device list interface -06- (Fig. 8) ɠ ɢ ɣ ɡ Basic settings: Permission sharing: Click “Share” to enter the sharing interface (Fig. 9). Enter the e-mail address or mobile phone number of a family member to whom you would like to share permissions for camera viewing (Fig. 10) and click “Next” to set the permissions of camera viewing by the family member. The family number should then find option “My Friend” on “Mine” page on the APP on his mobile phone and click to view content on the camera (Fig. 11) Through a QR code Through a sound wave ɠ ɡ -07- Cloud service: For viewing the cloud service package information of the current device or subscribing the cloud storage service for the current device View UID: For viewing the current UID number of the camera Delete device: For deleting the device information currently on the APP Push alarm: If this icon is clicked, the al…

Text truncated - open the document above for the full version.

Code:AB-RF-05-b ExternalPhotograph ANT Code:AB-RF-05-b Code:AB-RF-05-b Code:AB-RF-05-b

Labellocation: Label:

Code:AB-RF-05-b InternalPhotograph Code:AB-RF-05-b Code:AB-RF-05-b Code:AB-RF-05-b Code:AB-RF-05-b Code:AB-RF-05-b Code:AB-RF-05-b

version01 ShenzhenZhuoyueQichuangTechnologyCo.,Ltd. DeclarationconcerningAntennaSpecification Itisherebydeclaredthattheproduct ModelNo.:XG-01,XG-02,XG-03,XG-04,XG-05,XG-06,XG-07,XG-08,XG-09,XG-10, XG-11,XG-12,XG-13,XG-14,XG-15,XG-16,XG-17,XG-18,XG-19 FCCID:2A8LI-XG-01 fulfillstherequirementinFCCtestrelatingtotheantennatype. ThedevicespecifiedaboveconfirmstotheFCCrecommendationsfor external antennatype(s) describedbelow: ModelNo.ofantenna:AN2400-78F03BX-W Typeofantenna:Rodantenna Gainoftheantenna:2.02dBi Frequencyrange:2412-2462MHz Themountingoftheantennaisfixedtotheradiomoduleandnootherantennashouldbeused. Companyname:ShenzhenZhuoyueQichuangTechnologyCo.,Ltd. Address:RoomB607,Building1,ZoneA,BaoanInternetBase,BaoyuanRoad, XixiangSub-District,Bao'anDistrict,518101Shenzhen,China City:Shenzhen ZIP/Postalcode:518101 Country:China Place:Date:9/28/2022 Signature:

TengxiangTechnology.Inc ProductNumber:AN2400-78F03BX-W ProductName:Antenna FileNo.:210123002Version:1.0Date:2021.01.23 SpecificationForApproval Customer：瑞博斯 CustomerP/N： TengxiangP/N：AN2400-78F03BX-W TengxiangCheckedBy:CustomerApprovedBy: 工程：邓文兵 射频：韦佳 TengxiangTechnology.Inc NO.53ShatouShaChongRoad,ChangAnTown,Guangdongprovince,China TEL:86-769-81873082FAX:86-769-82663788 http://www.tenxiang.cn Descripti on : 2.4G ANTE NNA With 1.37C able L=370mm Tengxiang Technology.Inc Product Number: AN2400-78F03BX-W Product Name: 2.4GHz Antenna Page 1 Version: 1.0Issue Date: 2021.01.23 1. Specification Sample Photo A. Electrical Characteristics Frequency2400 ~ 2500 MHz V.S.W.R.<= 2.0 Antenna Gain2.02 dBi PolarizationLinear Impedance50 Ohm B. Material & Mechanical Characteristics Material of RadiatorCu Material of PlasticABS Cable Type1.37 Connector TypeMini conn C. Environmental Operation Temperature- 40 ̊C ~ + 80 ̊C Storage Temperature- 40 ̊C ~ + 80 ̊C 2. Characteristics and Reliability Test Test ItemsTest Condition and ProcedureRequirements C1V.S.W.R.Set DUT on Network Analyzer; make individual calibration to test Directive DUT specification C2Antenna Gain Set DUT on Antenna Chamber; make individual calibration to test Directive DUT specification TengxiangTechnology.Inc ProductNumber:AN2400-78F03BX-W ProductName:2.4GHzAntenna Page 2 Version:1.0IssueDate:2021.01.23 M1VibrationMIL-STD-202G,201A Amplitude:0.03inch(0.76mm);Freq:10to55Hz 3directions;2hoursforeachdirection 1.NoVisualDamage 2.FrequencyTol.<=5% M2Random Drop Height:1.5Meter; 3directions;1timeforeachdirection 1.Nopartsseparated 2.FrequencyTol.<=5% M3SolderabilityMIL-STD-202G,210F,cond.A Solderiron:350±10°C;Duration:5seconds 1.MountedonPCB 2.NoVisualDamage M4Terminal- PullTest MIL-STD-202G,211A,cond.A Holdingwithindividualspecification;forceapplied toaxisofterminal 1.DirectiveDUTspecification 2.FrequencyTol.<=5% M5Terminal- TorqueTest MIL-STD-202G,211A,cond.E Holdingwithindividualspecification;applied clockwiseandcounterclockwisetotheaxisof terminal 1.DirectiveDUTspecification 2.FrequencyTol.<=5% M6DimensionInspectionofdimension,color,material,package, surfaceprocess DirectiveDUTspecification E1SaltSprayMIL-STD-202G,101E,cond.B Temp:35°C;RH:>=95%;NaClsolution:>=5%; Time:24hours After2HoursRecovery 1.NoVisualDamage 2.FrequencyTol.<=5% E2HumidityMIL-STD-202G,103B,cond.B Temp:40°C;RH:>=95%;Time:48hours After2HoursRecovery 1.NoVisualDamage 2.FrequencyTol.<=5% E3Thermal Shock 1Cycle:-40°C(30minutes)to+80°C(30minutes) Cycles:24 After2HoursRecovery 1.NoVisualDamage 2.FrequencyTol.<=5% E4Life(High Temp.) MIL-STD-202G,108A,cond.A Temp:80°C;Time:96hours After2HoursRecovery 1.NoVisualDamage 2.FrequencyTol.<=5% R1RoHSWithReferencetoIEC62321:2008withflowchartDirectiveRoHS2015/863(EU) 3.Antenna-SParameterTestData TengxiangTechnology.Inc ProductNumber:AN2400-78F03BX-W ProductName:2.4GHzAntenna Page 3 Version:1.0IssueDate:2021.01.23 4.Antenna-RadiationPatternTestData Frequency(MHz)2400.02410.02420.02430.02440.02450.02460.02470.02480.02490.02500.0 Gain(dBi)2.021.881.781.691.491.521.421.531.531.731.92 Efficiency(%)56.5455.0954.0152.7851.4952.8352.4653.6753.2353.9654.96 TengxiangTechnology.Inc ProductNumber:AN2400-78F03BX-W ProductName:2.4GHzAntenna Page 4 Version:1.0IssueDate:2021.01.23 5.MechanicalDrawing(Seeattachedfiles)

RFEXPOSUREEVALUATION AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeusedto evaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF)Radiation asspecifiedin§1.1307(b) FCCID:2A8LI-XG-01 EUTSpecification EUTWebvideocamera Frequencyband(Operating)WLAN:2.412GHz~2.462GHz WLAN:5.18GHz~5.32GHz/5.50GHz~5.70GHz WLAN:5.745GHz~5825GHz Others:BLE:2402-2480MHz DevicecategoryPortable(<20cmseparation) Mobile(>20cmseparation) Others___ ExposureclassificationOccupational/Controlledexposure(S=5mW/cm2) GeneralPopulation/Uncontrolledexposure(S=1mW/cm2) AntennadiversitySingleantenna Multipleantennas Txdiversity Rxdiversity Tx/Rxdiversity Max.outputpower18.84dBm(0.0766W) Antennagain(Max)2.02dBi EvaluationappliedMPEEvaluation SAREvaluation LimitsforMaximumPermissibleExposure(MPE) Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) Power Density(mW/cm 2 ) Average Time (A)LimitsforOccupational/ControlExposures 300-1500----F/3006 1500-100000----56 (B)LimitsforGeneralPopulation/UncontrolExposures 300-1500----F/15006 1500-100000----130 Friistransmissionformula:Pd=(Pout*G)\(4*pi*R2) Where Pd=PowerdensityinmW/cm 2 Pout=outputpowertoantennainMw G=gainofantennainlinearscale Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdthelimitofMPE,1mW/cm2.Ifweknowthemaximumgainoftheantennaand totalpowerinputtotheantenna,throughthecalculation,wewillknowthedistance wheretheMPElimitisreached. MeasurementResult Operating Mode Channel Frequency (MHz) Maximum output power (dBm) Tuneup tolerance (dBm) Max.Tuneup Power (dBm) Antenna Gain (dBi) Power densityat 20cm (mW/cm2) Power density Limits (mW/cm2) 802.11b 241217.3317.33±118.332.020.02161 243716.9916.99±117.992.020.02001 246218.8418.84 ±1 19.842.020.03051 802.11g 241216.1316.13±117.132.020.01641 243715.8815.88±116.882.020.01551 246217.8217.82 ±1 18.822.020.02421 802.11n (HT20) 241215.8715.87±116.872.020.01541 243715.1815.18±116.182.020.01321 246217.0617.06 ±1 18.062.020.02031

Page1of44 AppendixTestData ReportNo.:18220WC20210401TestSampleNo.:1-2-2 StartTestDate:2022.9.7FinishTestDate:2022.9.13 TestEngineer:Auditor: Temperature:27.3 °C RelativeHumidity:47% Pressure:1012hPa AppendixA:DTSBandwidth TestResult TestModeAntennaFrequency[MHz]DTSBW[MHz]FL[MHz]FH[MHz]Limit[MHz]Verdict 11BAnt1 24129.7602407.1602416.920≥0.5PASS 243710.0802432.0802442.160≥0.5PASS 24629.6802457.3202467.000≥0.5PASS 11GAnt1 241216.4802403.7602420.240≥0.5PASS 243716.4802428.7602445.240≥0.5PASS 246216.4402453.7602470.200≥0.5PASS 11N20Ant1 241217.6802403.1602420.840≥0.5PASS 243717.6802428.1602445.840≥0.5PASS 246217.7202453.1602470.880≥0.5PASS Page2of44 TestGraphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 Page3of44 11G_Ant1_2412 11G_Ant1_2437 Page4of44 11G_Ant1_2462 11N20_Ant1_2412 Page5of44 11N20_Ant1_2437 11N20_Ant1_2462 Page6of44 Page7of44 AppendixB:OccupiedChannelBandwidth TestResult TestModeAntennaFrequency[MHz]OCB[MHz]FL[MHz]FH[MHz] 11BAnt1 241213.1942405.44522418.6392 243713.1442430.44882443.5928 246213.0692455.50032468.5693 11GAnt1 241216.7142403.65852420.3725 243716.7702428.65812445.4281 246216.7662453.64532470.4113 11N20Ant1 241217.8372403.12432420.9613 243717.8222428.09772445.9197 246217.8222453.11662470.9386 Page8of44 TestGraphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 Page9of44 11G_Ant1_2412 11G_Ant1_2437 Page10of44 11G_Ant1_2462 11N20_Ant1_2412 Page11of44 11N20_Ant1_2437 11N20_Ant1_2462 Page12of44 Page13of44 AppendixC:Maximumconductedoutputpower TestResultPeak TestModeAntenna Frequency [MHz] PeakPower [dBm] Conducted Limit[dBm] EIRP [dBm] EIRP Limit[dBm] Verdict 11BAnt1 241217.33≤30.0019.35≤36.00PASS 243716.99≤30.0019.01≤36.00PASS 246218.84≤30.0020.86≤36.00PASS 11GAnt1 241216.13≤30.0018.15≤36.00PASS 243715.88≤30.0017.90≤36.00PASS 246217.82≤30.0019.84≤36.00PASS 11N20Ant1 241215.87≤30.0017.89≤36.00PASS 243715.18≤30.0017.20≤36.00PASS 246217.06≤30.0019.08≤36.00PASS Page14of44 AppendixD:Maximumpowerspectraldensity TestResult TestModeAntennaFrequency[MHz]Result[dBm/3kHz]Limit[dBm/3kHz]Verdict 11BAnt1 2412-12.35≤8.00PASS 2437-12.59≤8.00PASS 2462-11.19≤8.00PASS 11GAnt1 2412-15.35≤8.00PASS 2437-16.62≤8.00PASS 2462-14.09≤8.00PASS 11N20Ant1 2412-17.36≤8.00PASS 2437-17.24≤8.00PASS 2462-16.19≤8.00PASS Page15of44 TestGraphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 Page16of44 11G_Ant1_2412 11G_Ant1_2437 Page17of44 11G_Ant1_2462 11N20_Ant1_2412 Page18of44 11N20_Ant1_2437 11N20_Ant1_2462 Page19of44 Page20of44 AppendixE:Bandedgemeasurements TestResult TestModeAntennaChNameFrequency[MHz]RefLevel[dBm]Result[dBm]Limit[dBm]Verdict 11BAnt1 Low24121.91-43.85≤-18.09PASS High24623.66-52.98≤-16.35PASS 11GAnt1 Low2412-2.54-38.72≤-22.54PASS High2462-1.21-53.1≤-21.21PASS 11N20Ant1 Low2412-2.96-40.67≤-22.96PASS High2462-1.85-50.14≤-21.85PASS Page21of44 TestGraphs 11B_Ant1_Low_2412 11B_Ant1_High_2462 11G_Ant1_Low_2412 Page22of44 11G_Ant1_High_2462 11N20_Ant1_Low_2412 Page23of44 11N20_Ant1_High_2462 Page24of44 AppendixF:ConductedSpuriousEmission TestResult TestModeAntennaFrequency[MHz] FreqRange [Mhz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict 11BAnt1 2412 Reference1.451.45---PASS 30~10001.45-68.43≤-28.55PASS 1000~265001.45-53.86≤-28.55PASS 2437 Reference1.241.24---PASS 30~10001.24-69.68≤-28.76PASS 1000~265001.24-53.76≤-28.76PASS 2462 Reference3.273.27---PASS 30~10003.27-67.05≤-26.73PASS 1000~265003.27-54.21≤-26.73PASS 11GAnt1 2412 Reference-3.01-3.01---PASS 30~1000-3.01-70.49≤-33.01PASS 1000~26500-3.01-53.62≤-33.01PASS 2437 Reference-3.51-3.51---PASS 30~1000-3.51-68.98≤-33.51PASS 1000~26500-3.51-54.25≤-33.51PASS 2462 Reference-0.95-0.95---PASS 30~1000-0.95-68.55≤-30.95PASS 1000~26500-0.95-53.9≤-30.95PASS 11N20Ant1 2412 Reference-2.94-2.94---PASS 30~1000-2.94-68.58≤-32.94PASS 1000~26500-2.94-53.88≤-32.94PASS 2437 Reference-3.78-3.78---PASS 30~1000-3.78-69.73≤-33.78PASS 1000~26500-3.78-54.52≤-33.78PASS 2462 Reference-2.25-2.25---PASS 30~1000-2.25-70.23≤-32.25PASS 1000~26500-2.25-54.82≤-32.25PASS Page25of44 TestGraphs 11B_Ant1_2412_0~Reference 11B_Ant1_2412_30~1000 11B_Ant1_2412_1000~26500 Page26of44 11B_Ant1_2437_0~Reference 11B_Ant1_2437_30~1000 Page27of44 11B_Ant1_2437_1000~26500 11B_Ant1_2462_0~Reference Page28of44 11B_Ant1_2462_30~1000 11B_Ant1_2462_1000~26500 Page29of44 11G_Ant1_2412_0~Reference 11G_Ant1_2412_30~1000 Page30of44 11G_Ant1_2412_1000~26500 11G_Ant1_2437_0~Reference Page31of44 11G_Ant1_2437_30~1000 11G_Ant1_2437_1000~26500 Page32of44 11G_Ant1_2462_0~Reference 11G_Ant1_2462_30~1000 Page33of44 11G_Ant1_2462_1000~26500 11N20_Ant1_2412_0~Reference Page34of44 11N20_Ant1_2412_30~1000 11N20_Ant1_2412_1000~26500 Page35of44 11N20_Ant1_2437_0~Reference 11N20_Ant1_2437_30~1000 Page36of44 11N20_Ant1_2437_1000~26500 11N20_Ant1_2462_0~Reference Page37of44 11N20_Ant1_2462_30~1000 11N20_Ant1_2462_1000~26500 Page38of44 Page39of44 AppendixG:DutyCycle TestResult TestModeAntennaFrequency[MHz] Transmission Duration[ms] Transmission Period[ms] DutyCycle [%] Factor 11BAnt1 24121.671.7098.240.08 24371.661.7097.650.10 24621.671.7098.240.08 11GAnt1 24120.330.3691.670.38 24370.320.3688.890.51 24620.320.3688.890.51 11N20Ant1 24120.290.3290.630.43 24370.290.3387.880.56 24620.290.3290.630.43 Page40of44 TestGraphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 Page41of44 11G_Ant1_2412 11G_Ant1_2437 Page42of44 11G_Ant1_2462 11N20_Ant1_2412 Page43of44 11N20_Ant1_2437 11N20_Ant1_2462 Page44of44 ---End---

ReportNo.:18220WC20210401FCCID:2A8LI-XG-01Page1of31 Code:AB-RF-05-b FCCTestReport ClientName: ShenzhenZhuoyueQichuangTechnology Co.,Ltd. ClientAddress: RoomB607,Building1,ZoneA,Baoan InternetBase,BaoyuanRoad,Xixiang Sub-District,Bao'anDistrict,518101 Shenzhen,China ProductName:Webvideocamera ReportDate:Sept.22,2022 ShenzhenAnbotekComplianceLaboratoryLimited ReportNo.:18220WC20210401FCCID:2A8LI-XG-01Page2of31 Code:AB-RF-05-b Contents 1.GeneralInformation............................................................................................................................................6 1.1.ClientInformation.....................................................................................................................................6 1.2.DescriptionofDevice(EUT)..................................................................................................................6 1.3.AuxiliaryEquipmentUsedDuringTest.................................................................................................7 1.4.DescriptionofTestConfiguration..........................................................................................................7 1.5.DescriptionOfTestSetup.......................................................................................................................8 1.6.TestEquipmentList.................................................................................................................................9 1.7.MeasurementUncertainty....................................................................................................................10 1.8.DescriptionofTestFacility....................................................................................................................10 2.SummaryofTestResults.................................................................................................................................11 3.ConductedEmissionTest................................................................................................................................12 3.1.TestStandardandLimit........................................................................................................................12 3.2.TestSetup...............................................................................................................................................12 3.3.TestProcedure.......................................................................................................................................12 3.4.TestData.................................................................................................................................................12 4.RadiationSpuriousEmissionandBandEdge.............................................................................................15 4.1.TestStandardandLimit........................................................................................................................15 4.2.TestSetup...............................................................................................................................................15 4.3.TestProcedure.......................................................................................................................................16 4.4.TestData.................................................................................................................................................17 5.MaximumPeakOutputPowerTest................................................................................................................26 5.1.TestStandardandLimit........................................................................................................................26 5.2.TestSetup...............................................................................................................................................26 5.3.TestProcedure.......................................................................................................................................26 5.4.TestData.................................................................................................................................................26 6.6DBOccupyBandwidthTest...........................................................................................................................27 6.1.TestStandardandLimit........................................................................................................................27 6.2.TestSetup...............................................................................................................................................27 6.3.TestProcedure.......................................................................................................................................27 6.4.TestData.................................................................................................................................................27 7.PowerSpectralDensityTest...........................................................................................................................28 7.1.TestStandardandLimit........................................................................................................................28 7.2.TestSetup...............................................................................................................................................28 7.3.TestProcedure.......................................................................................................................................28 7.4.TestData.................................................................................................................................................28 8.100kHzBandwidthofFrequencyBandEdgeRequirement......................................................................29 8.1.TestStandardandLimit................................................................................................…

Text truncated - open the document above for the full version.

Code:AB-RF-05-b TestSetupPhotograph PhotoofConductedEmissionMeasurement PhotoofRadiationEmissionTest Code:AB-RF-05-b