2A8LTMPA24Access control unit

∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∨±...≥°←♠↑≡ ⇑↔↔≡↑ƒ ⊄≡↑′′∂±≥ ≠°↑ ⇑↔↔≡↑ƒ  ⊂...↑≡♦ ⌡∉⇒∉⊂∨ ⌡∉⇒∉⊂∨ ⌡ ∉⇒∉⊂∨ ⌡ ∉⇒∉⊂∨ ∫ ⌡ ∉⇒∉⊂∨ ⌡ ∉⇒∉⊂∨ ⌡∉⇒∉⊂∨ ⌡∉⇒∉⊂∨ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ♠≥↔∂↓≥≡ ⊄∂≡∫≈°♦± ∉°∂±↔← ⊂∂′′↓≥≡ ∉±≡≥ ⇔°°↑ ⊆≡′′°♥≥ ≠°↑ ∨←ƒ ∪≥≥ °♠±↔∂±÷ ±≈ ⇐≥∂±÷ ⊂∂′′↓≥≡ ∉±≡≥ ⇔°°↑ ⊆≡′′°♥≥ ≠°↑ ∨←ƒ ∪≥≥ °♠±↔∂±÷ ±≈ ⇐≥∂±÷ ∫ ⊃⇔⇐ ñ  ∪ ∉↑∂′′↑ƒ ∉°♦≡↑ ⊂♠↓↓≥ƒ  ⊃⇔⇐ ⇑...×♠↓ ⇑↔↔≡↑ƒ ∉±≡≥ ⇔°°↑ ¬↑°♠±≈∂±÷ ∉°∂±↔ ∨±...≥°←♠↑≡ ∂≈ ⊄′′↓≡↑ ∠≠≠ ∪≥≥ ⊄′′↓≡↑ ⇒≥≥∫∂± ⊂′′↑↔ ⇐°±↔↑°≥ ∉±≡≥ ⇒⇐⊂⇐ ♠≥↔∂↓≥≡ ±°...×∫°♠↔ ⋅°≥≡←♠≥↔∂↓≥≡ ±°...×∫°♠↔ ⋅°≥≡← ♠≥↔∂↓≥≡ ±°...×∫°♠↔ ⋅°≥≡← ∂± ⊂°...×≡↔ ⊇⊂⇒ñ ⊇ ⊃≡↑←∂°± °±≥ƒ ∫ ∫ ∫ ∫ ∫  ⇒♠♣∂≥∂↑ƒ √±↓♠↔←  ⇒♠♣∂≥∂↑ƒ ⊆≡≥ƒ ∠♠↔↓♠↔← ∉°∨ ⊂♦∂↔...• ⇔√∉ ⊂♦∂↔...•  ⊂∪ ∠∧∧   ∠∇ ⊂≡↔ ∫ ∠∧∧  ∨° ⊆⊂   ♠← √ñ∠ ⇔ ≡♥∂ ...≡←  ∨° ⊆⊂   ♠← √ñ∠ ⇔ ≡♥∂ ...≡←  ∨°  ⊆⊂    ♠ ← ⇔ ° ♦± ← ↔↑ ≡′′ ∉± ≡≥←  ∨°  ⊆⊂    ♠ ← ⇔ ° ♦± ← ↔↑ ≡′′ ∉± ≡≥←             ⊂≡↔ ⇔√∉ ⊂♦∂↔...•  ⊂∪ ∠∧∧  ∠∇ ∪∂≡÷ ± ≈ ⊆ ∨⇒⇔ ∨⊆  ⇒ñ ⇑ ∫∠ ⊂⇔∉ ∠ ∇  ∠∧∧  ←≡...°±≈↑ƒ ñ∉↑∂′′↑ƒ ↓±≡≥∠∇  ⊇←≡↑ √∉ ≈≈↑≡←← ñ⇔≡≠♠≥↔ √∉ ≈≈↑≡←←∠∇  ⇒≈≈↑≡←←   ⇒≈≈↑≡←←   ⇒≈≈↑≡←←   ⇒≈≈↑≡←←   ⇒≈≈↑≡←←   ∪∂≡÷±≈ ⊆∨⇒⇔∨⊆ ⇒ñ⇑∫∠⊂⇔∉∠∇ ⊂≡↔ ⇔√∉ ⊂♦∂↔...•  ⊂∪ ∠∧∧   ∠∇  ∨°  ∠⊂⇔ ∉  ∨°  ∠⊂⇔ ∉  ∨°  ∠⊂⇔ ∉  ∨°  ∠⊂⇔ ∉ ∠⊇⊄ ⊆∨⇒⇔∨⊆ ⊃ ∨♣↔≡↑± ∠⊇⊄ ∠⊇⊄ ∠⊇⊄ ⊆∨⇒⇔∨⊆ ⊃ ∨♣↔≡↑± ∫  ⇒♠♣∂≥∂↑ƒ √±↓♠↔←  ⇒♠♣∂≥∂↑ƒ ⊆≡≥ƒ ∠♠↔↓♠↔← ∉°∨ ⊂♦∂↔...• ⇔√∉ ⊂♦∂↔...•  ⊂∪ ∠∧∧  ∠∇ ⊂≡↔ ∫  ∠∧∧  ∨°  ⊆ ⊂  ♠ ← √ñ∠ ⇔ ≡♥∂...≡←  ∨°  ⊆ ⊂  ♠ ← √ñ∠ ⇔ ≡♥∂...≡←  ∨° ⊆ ⊂  ♠← ⇔°♦±←↔↑≡′′ ∉ ±≡≥←  ∨° ⊆ ⊂  ♠← ⇔°♦±←↔↑≡′′ ∉ ±≡≥←             ⊂≡↔ ⇔√∉ ⊂♦∂ ↔...•  ⊂∪  ∠∧∧  ∠∇ ∪∂≡÷±≈ ⊆∨⇒⇔∨⊆ ⇒ñ⇑∫∠⊂⇔∉∠∇  ∠∧∧  ←≡...°±≈↑ƒ ñ∉↑∂′′↑ƒ ↓±≡≥∠∇  ⊇←≡ ↑ √∉ ≈≈↑ ≡←← ñ⇔≡≠♠≥↔ √∉ ≈≈↑≡← ←∠∇  ⇒≈≈↑≡←←   ⇒≈≈↑≡←←   ⇒≈≈↑≡←←   ⇒≈≈↑≡←←   ⇒≈≈↑≡←←   ∪∂ ≡÷ ±≈ ⊆∨⇒ ⇔∨⊆ ⇒ñ ⇑∫ ∠⊂⇔∉ ∠∇ ⊂≡↔ ⇔ √∉ ⊂♦ ∂↔...•  ⊂∪  ∠∧∧   ∠∇  ∨°  ∠ ⊂⇔ ∉  ∨°  ∠ ⊂⇔ ∉  ∨°  ∠ ⊂⇔ ∉  ∨°  ∠ ⊂⇔ ∉ ∫ ∫ ⊂•♠↔≈°♦± ⇑♠↔↔°± ∠∇ ∂±← ∠∇ ⇑↔↔≡↑ƒ ⇐•≡...× ∉°♦≡↑ √±≈∂...↔°↑ ⇐•≡...× ⊆♠±±∂±÷ √±≈∂...↔°↑ ⇔°°↑ ⇔°°↑ ∠∇ ∉°∨ ∫ ∫ ∫ ∉°∨ ⊂♦∂↔...• ⇑↔↔≡↑ƒ ∫ ∫ ∫ ∫ ∫ ñ⊆∨∩  ∫  ñ⇔↑⇐±↔ ∫  √∇∉⊇⊄ ⇒⊇∩ √∇ ∫ √∇ ∫ ∫ ∫ ∫ ∫ ⊂⋅⊇⊄⇔∠∪∇ ⇑♠↔↔°± ⇒∇ñ∪⇒∇ ∨↔•≡↑±≡↔ñ√±↔≡↑±≡↔ ⇐⇒⊄∨ ⊂⊄∉ ⇐≥≡ ⊆∏ ⊂↔↑∂×≡ ∨♣∂↔ ⇔≡♥∂...≡ ⊆∨∩ ⇔°°↑ ⇐°±↔...↔ ⊆≡≈≡↑ ⊂↔↑∂×≡ ⇔°°↑ ⇐°±↔...↔ ⊆≡≈≡↑ ⇔°°↑ ⇔°°↑  ⊆≡≈≡↑ ⇔°°↑  ⇒⊇∩ ⌡⇔°°↑  ⇒⊇∩ ⌡ ∉⇒⊂ ⇐≥≡ ∉⇒⊂ ⇐≥≡ ∉°∨ ⊂♦∂↔...• ⊂↔±≈↑≈ ≡↔≥ ∨±...≥°←♠↑≡ ∫ ⇒∇ñ∪⇒∇ ∨↔•≡↑±≡↔ñ√±↔≡↑±≡↔ ⇐⇒⊄∨ ⊂⊄∉ ⇐≥≡ ⊆∏ ⊂↔↑∂×≡ ∨♣∂↔ ⇔≡♥∂...≡ ⊆∨∩ ⇔°°↑ ⇐°±↔...↔ ⊆≡≈≡↑ ⊂↔↑∂×≡ ∨♣∂↔ ⇔≡♥∂...≡ ⊆∨∩ ⇔°°↑ ⇐°±↔...↔ ⊆≡≈≡↑ ⊂↔↑∂×≡ ∨♣∂↔ ⇔≡♥∂...≡ ⊆∨∩ ⇔°°↑ ⇐°±↔...↔ ⊆≡≈≡↑ ⊂↔↑∂×≡ ∨♣∂↔ ⇔≡♥∂...≡ ⊆∨∩ ⇔°°↑ ⇐°±↔...↔ ⊆≡≈≡↑ ⇔°°↑ ñ⇒⊇∩⌡ ⇔°°↑ ⇔°°↑  ⇔°°↑ ñ⇒⊇∩⌡ ⇔°°↑ ⇐°±±≡...↔∂°±← ⊆∏  °↑ ∉♠←•∫∂± ⇐°±±≡...↔°↑← ⇐⇒⊄∨ ⊂⊄∉ñ⊇⊄∉ ⇐≥≡ ⊆∏ ⊆≡≈≡↑ ⇐°±±≡...↔∂°±← ∪∂≡÷±≈ñ∠⊂⇐∉ ∫ ⊆∏ ⇐⇒⊄∨ ⊂⊄∉ ⇐≥≡ ⊆∏ ⊇∉ ⊄∠  ⇔∠∠⊆⊂ ∉⇒⊂ ⇐≥≡ ∉⇒⊂ ⇐≥≡ ∉⇒⊂ ⇐≥≡ ∉⇒⊂ ⇐≥≡ ⌡ ∧°↑ ∫≈°°↑ °↑ ∫≈°°↑ ←ƒ←↔≡′′⌠  ≥∂...≡±←≡ ∂← ↑≡→♠∂↑≡≈〉 ⇔°°↑ ⇒⊇∩ ⌡⇔°°↑ ⇒⊇∩ ⌡ ∫ ∫ ∫ ∫ ∫ ∫ ∉°∨ ⊂♦∂↔...• ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫

∫ ∫ ∫ ∫ ∧∂↑≡ ∉±≡≥ ∠♠↔∉♠↔ ∫ ⊆≡′′°♥≡ ∏♠′′↓≡↑ •≡≈ ∫ ∫ ∫ ∫ ∫ ∉°∨ ⊂♦∂↔...• ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫ ∫

Mobile App for Commissioning MPA2C3 User Guide Document 800-26531 Rev_B_August 2022 Copyright© 2022 Honeywell. All rights reserved. All product and brand names are the service marks, trademarks, registered trademarks, or registered service marks of their respective owners. Printed in the United States of America. Honeywell reserves the right to change any information in this document at any time without prior notice. Pro-Watch® is a trademark of Honeywell, Inc. Ordering Information Please contact your local Honeywell representative or visit us on the web at www.honeywellintegrated.com for information about ordering. Feedback Honeywell appreciates your comments about this manual. Please visit us on the web at www.honey- wellintegrated.com to post your comments. TABLE OF CONTENTS Chapter 1 - Device Utility App User Guide ................................................... 1 About the Guide ............................................................................................... 1 Intended Audience .................................................................................... 1 Acronyms and Abbreviations ........................................................................... 1 Introduction to Device Utility Mobile App ....................................................... 1 Getting started ................................................................................................. 2 Commissioning a New Panel .......................................................................... 2 Discover the Panel ..................................................................................... 4 Discover the Panel with Enclosure ............................................................. 5 Using the Bar code scanner ...................................................................... 10 Using Manual Mode ................................................................................. 11 Discover the Panel Without Enclosure ..................................................... 11 Web Integration ............................................................................................. 18 MAXPRO Cloud Integration ...................................................................... 18 WIN-PAK Integration or Mode ........................................................................19 View/Edit the Setup Details (or Update the Setup Details) ............................ 19 Configuration status ................................................................................ 22 Sharing Configuration .............................................................................. 24 Import Configuration ............................................................................... 27 Chapter 2 - Mobile App FAQs .............................................................................. 1 Why this App? ................................................................................................. 1 How to configure the device? .............................................................................. 1 Where are the configurations stored? ............................................................. 1 Why Sharing configurations? ..................................................................... 2 What are the high level steps to scan and configure a new panel? ................. 2 How to scan a new device? ................................................................................... 2 How to Setup Time Settings? ..................................................................... 3 Document 800-26531 Rev_B_August 2022 i How to Setup Use of Panel? ....................................................................... 3 How to Setup Network? ................................................................................... 3 How to share? ....................................................................................................... 4 Document 800-26531 Rev_B_August 2022 1 CHAPTER 1 DEVICE UTILITY APP USER GUIDE About the Guide This guide introduces and describes how to set up and commission MPA2 access control panels using Device Utility Mobile App. The minimum requirement for the device is: • Apple IOS 13, or higher • Android version 6 or higher Intended Audience This document is intended for the Installer or field engineer installing and commis- sioning an MPA2 access control device. Acronyms and Abbreviations • MPA2-MAXPRO Access Two/Four Door Access Control panel • MPC -MAXPRO Cloud • DHCP- Dynamic Host Configuration Protocol • EVL- Ethernet Virual Loop Introduction to Device Utility Mobile App Device Utility App is an intuitive mobile interface to commission MPA2 panels to be used as stand-alone panel in Web mode or as panel in the MAXPRO Cloud solu- tions. It allows you to add the MPA2 panels and download or push the configura- tion via Bluetooth. This App allows you to do the following: Commissioning an MPA2 by: • Securely connecting via Bluetooth 2 Document 800-26531 Rev_B_August 2022 • Set up panel properties • Set up use of panel in WEB (stand-alone),or MAXPRO CLOUD mode • Set up time parameters • Download set up configuration in MPA2 panel • Store the configuration in the App to review, modify and download again • Share securely the configuration with other App users via commonly used sharing channels Getting Started Commissioning a New Panel Steps to Commission a new pane Step 1. Launch the Device the Utility App 1. Tap on the Device Utility App to launch. Home Screen License Agreement Screen 2. Read the terms and conditions and then tap on the check box to agree. Document 800-26531 Rev_B_August 2022 3 Step 2. Discover the Panel 1. On the My Panels screen, tap on Discover new panel. The Discover New Panel screen is displayed. Discover New Panel Screen 4 Document 800-26531 Rev_B_August 2022 2. Turn ON the Mobile Bluetooth and then Panel Bluetooth for pairing. You can discover and pair the panel with or without Enclosure. Choose the req…

Text truncated - open the document above for the full version.

Rev 1/26/2023 Honeywell International Inc Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-30-2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: 2A8LTMPA24 Honeywell International Inc certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0032849689 Name: Honeywell International Inc Address: 12 Clintonville Rd Northford Connecticut United States 06484 Contact Person: Luke Sisson Tel.: 2034846154 Email: [email protected] Sincerely, Honeywell International Inc Luke Sisson

C:\Users\H245259\Desktop\FCC angency Letter.docx Honeywell International Inc Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Da te: Dec.14,2022 S UBJECT: FCC Application for FCC ID: 2A8LTMPA24 To W hom It May Concern: W e, the undersigned, hereby authorize Yu Anlu at TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch on our behalf shall have the same effect as acts of our own. T his is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. R egards, P rinted Name: Luke Sisson S ignature：

Rev 11/20/07 Honeywell International Inc Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2A8LTMPA24 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name (Block Diagram, Schematics, Operation description) ( Block Diagram, Schematics,Operation description.pdf”) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name (NA) (NA) Sincerely, Printed Name: Luke Sisson Signature：

External Photos Documentation Applicant: Honeywell International Inc Page 1 of 3 Product: Access control unit FCC ID: 2A8LTMPA24 IC: 12252AMPA24 Model: MPA4MPSU External Photos Documentation Applicant: Honeywell International Inc Page 2 of 3 Product: Access control unit FCC ID: 2A8LTMPA24 IC: 12252AMPA24 External Photos Documentation Applicant: Honeywell International Inc Page 3 of 3 Product: Access control unit FCC ID: 2A8LTMPA24 IC: 12252AMPA24

Label & Location (MPA2MPSU and MPA4MPSU) Label position Label Label & Location (MPA2MPSU and MPA4MPSU) Label position

Internal Photos Documentation Applicant: Honeywell International Inc Page 1 of 11 Product: Access control unit FCC ID: 2A8LTMPA24 IC: 12252AMPA24 Model: MPA4MPSU Internal Photos Documentation Applicant: Honeywell International Inc Page 2 of 11 Product: Access control unit FCC ID: 2A8LTMPA24 IC: 12252AMPA24 Internal Photos Documentation Applicant: Honeywell International Inc Page 3 of 11 Product: Access control unit FCC ID: 2A8LTMPA24 IC: 12252AMPA24 Internal Photos Documentation Applicant: Honeywell International Inc Page 4 of 11 Product: Access control unit FCC ID: 2A8LTMPA24 IC: 12252AMPA24 Internal Photos Documentation Applicant: Honeywell International Inc Page 5 of 11 Product: Access control unit FCC ID: 2A8LTMPA24 IC: 12252AMPA24 Internal Photos Documentation Applicant: Honeywell International Inc Page 6 of 11 Product: Access control unit FCC ID: 2A8LTMPA24 IC: 12252AMPA24 Antenna Internal Photos Documentation Applicant: Honeywell International Inc Page 7 of 11 Product: Access control unit FCC ID: 2A8LTMPA24 IC: 12252AMPA24 Internal Photos Documentation Applicant: Honeywell International Inc Page 8 of 11 Product: Access control unit FCC ID: 2A8LTMPA24 IC: 12252AMPA24 Internal Photos Documentation Applicant: Honeywell International Inc Page 9 of 11 Product: Access control unit FCC ID: 2A8LTMPA24 IC: 12252AMPA24 Internal Photos Documentation Applicant: Honeywell International Inc Page 10 of 11 Product: Access control unit FCC ID: 2A8LTMPA24 IC: 12252AMPA24 Internal Photos Documentation Applicant: Honeywell International Inc Page 11 of 11 Product: Access control unit FCC ID: 2A8LTMPA24 IC: 12252AMPA24

Report No: 709502255205-00B EMC_SHA_F_R_02.06E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 1 of 2 Rev. 20.00 MPE Calculation Applicant: Honeywell International Inc Address: 12 Clintonville Rd Northford Connecticut United States 06484 Product: Access control unit FCC ID: 2A8LTMPA24 Model No.: MPA2C3, MPA2C3-4, MPA2MPSU, MPA4MPSU Reference RF report # 709502255205-00A According to subpart 15.247(i)and subpart §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1,500 / / f/1500 30 1,500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. Calculated Formulary: Predication of MPE limit at a given distance S = PG/4πR² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); Report No: 709502255205-00B EMC_SHA_F_R_02.06E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 2 of 2 Rev. 20.00 Calculated Data for BLE Maximum peak output power at antenna input terminal (dBm): 5.93 Maximum peak output power at antenna input terminal (mW): 3.92 Prediction distance (cm): 20 Antenna Gain, typical (dBi): 3.9 Maximum Antenna Gain (numeric): 2.45 The worst case is power density at predication frequency at 20 cm (mW/cm 2 ): 0.0019 MPE limit for general population exposure at prediction frequency (mW/cm 2 ): 1.0 The max power density 0.0019 (mW/cm 2 ) < 1 (mW/cm 2 ) Result: Compliant - TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch Reviewed by: Prepared by: Tested by: _____________________ _____________________ ______________________ Hui TONG Jiaxi XU Cheng Huali EMC Section Manager EMC Project Engineer EMC Test Engineer Date: 2022-11-17 Date: 2022-11-17 Date: 2022-11-17

Prepared by: Xu Ying Approved by: Xu Kai TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 OTA TEST REPORT TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in ANSI/IEEE Std 149-2008. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Applicant Honeywell Integrated Technology (China) Co., Ltd. Product Built-On PCB Bluetooth Antenna Model 200-02169 Brand Honeywell Report No. Y2211A1104-T1 Issue Date November 11, 2022 OTA Test Report Report No: Y2211A1104-T1 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 2 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENTS 1. Test Laboratory .............................................................................................................................. 3 1.1. Notes of the Test Report ................................................................................................... 3 1.2. Test facility ........................................................................................................................ 3 1.3. Testing Location ................................................................................................................ 3 1.4. Laboratory Environment .................................................................................................... 4 2. General Description of Equipment under Test ............................................................................... 5 2.1. Applicant and Manufacturer Information ............................................................................ 5 2.2. General information ........................................................................................................... 5 2.3. Test Date ........................................................................................................................... 5 2.4. Received Date ................................................................................................................... 5 2.5. Applied Standards ............................................................................................................. 6 3. Test Conditions .............................................................................................................................. 7 3.1. Test Configuration ............................................................................................................. 7 3.2. Test Measurement ............................................................................................................. 7 4. Test Results ................................................................................................................................... 8 4.1. Gain and Efficiency ............................................................................................................ 8 5. Equipment List ............................................................................................................................... 9 ANNEX A: 3-D Pattern Plots .................................................................................................................... 10 A NN EX B: The EUT Appearance and Test Configuration ................................................................... 11 B.1 EUT Appearance ................................................................................................................. 11 B.2 Test Configuration .............................................................................................................. 12 OTA Test Report Report No: Y2211A1104-T1 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 3 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1. Test Laboratory 1.1. Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA Technology (Shanghai) Co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2. Test facility A2LA (Certificate Number: 3857.01) TA Technology (Shanghai) Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform measurement. 1.3. Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: [email protected] OTA Test Report Report No: Y2211A1104-T1 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 4 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1.4. Laboratory Environment Temperature Min. =19°C，Max. = 25°C Relative humidity Min. =40%，Max. =72% Shield effect 0.7-6GHz > 100dB Ground resistance <0.5Ω OTA Test Report Report No: Y2211A1104-T1 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 5 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 2. General Description of Equipment under Test 2.1. Applicant and Manufacturer Information Applicant Name Honeywell Integrated Technology (China) Co., Ltd. Applicant address B3F5, 430 Li Bing Road, Shanghai, China Manufacturer Name NOVAR GmbH Manufacturer address Dieselstr-2, 41469 Neuss, GERMANY 2.2. General information EUT Description Product Name: Built-On PCB…

Text truncated - open the document above for the full version.

Report Number: 709502255205-00A EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 1 of 51 Rev. 20.00 FCC/IC - TEST REPORT Report Number : 709502255205-00A Date of Issue: November 17, 2022 Model : MPA2C3, MPA2C3-4, MPA2MPSU, MPA4MPSU Product Type : Access control unit Applicant : Honeywell International Inc Address : 12 Clintonville Rd Northford Connecticut United States 06484 Manufacturer : Honeywell International Inc Address : 12 Clintonville Rd Northford Connecticut United States 06484 Test Result : ◼ Positive  Negative Total pages including Appendices : 51 TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. Report Number: 709502255205-00A EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 2 of 51 Rev. 20.00 1 Table of Contents 1 Table of Contents ................................................................................................................................................................ 2 2 Details about the Test Laboratory ..................................................................................................................................... 3 3 Description of the Equipment under Test ........................................................................................................................ 4 4 Summary of Test Standards .............................................................................................................................................. 5 5 Summary of Test Results ................................................................................................................................................... 6 6 General Remarks ................................................................................................................................................................ 7 7 Test Setups .......................................................................................................................................................................... 8 8 Systems test configuration ............................................................................................................................................... 11 9 Technical Requirement .................................................................................................................................................... 12 9.1 Conducted Emission ................................................................................................................................................ 12 9.2 Conducted peak output power................................................................................................................................ 17 9.3 6dB bandwidth and 99% Occupied Bandwidth .................................................................................................... 20 9.4 Power spectral density ............................................................................................................................................. 25 9.5 Spurious RF conducted emissions ........................................................................................................................ 28 9.6 Band edge ................................................................................................................................................................. 35 9.7 Spurious radiated emissions for transmitter ......................................................................................................... 40 10 Test Equipment List ...................................................................................................................................................... 48 11 System Measurement Uncertainty ............................................................................................................................. 49 12 Photographs of Test Set-ups ...................................................................................................................................... 50 13 Photographs of EUT ..................................................................................................................................................... 50 14 Appendix ........................................................................................................................................................................ 51 Report Number: 709502255205-00A EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 6141…

Text truncated - open the document above for the full version.

Applicant: Honeywell International Inc Product: Access control unit FCC ID: 2A8LTMPA24 IC: 12252AMPA24 ©2022 Not to be reproduced, except in its entirety, Page 1 of 3 without the Permission of TÜ V SÜ D Certification and Testing (China) Co., Ltd. Shanghai Branch PHOTOGRAPHS OF TEST SET UP Field Strength and Harmonics Test Setup Radiated Emission Setup 9KHz-30MHz 30MHz ~ 1GHz Applicant: Honeywell International Inc Product: Access control unit FCC ID: 2A8LTMPA24 IC: 12252AMPA24 ©2022 Not to be reproduced, except in its entirety, Page 2 of 3 without the Permission of TÜ V SÜ D Certification and Testing (China) Co., Ltd. Shanghai Branch 1GHz ~ 18GHz 18GHz ~ 25GHz Applicant: Honeywell International Inc Product: Access control unit FCC ID: 2A8LTMPA24 IC: 12252AMPA24 ©2022 Not to be reproduced, except in its entirety, Page 3 of 3 without the Permission of TÜ V SÜ D Certification and Testing (China) Co., Ltd. Shanghai Branch Conducted emi…

Text truncated - open the document above for the full version.