2A8NQ-HW622H-SE-01Outdoor High-power Dual-band Wireless AP

Shenzhen meiweisi Technology Co., Ltd 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – EquipmentType Company name: Shenzhen meiweisi Technology Co., Ltd Address: Building A7, Huafa Industrial Park, Fuyuan 1st Road, Zhancheng Community, Bao'an District, Shenzhen,Guangdong Province, China Product Name: Outdoor High-power Dual-band Wireless AP FCCID: 2A8NQ-HW622H-SE-01 Model(s): HW622H-SE-01, HW622H-SE, HW622G-SE, HW622G-SE-01, HW521H-SE, HW521H-SE-01, HW521G-SE-01 2.911(d)(5)(i) EquipmentType We, [Shenzhen meiweisi Technology Co., Ltd] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: quxiao jiang Date: Nov. 24, 2025 Title: CEO Company name: Shenzhen meiweisi Technology Co., Ltd Signature: NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen meiweisi Technology Co., Ltd 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Shenzhen meiweisi Technology Co., Ltd Address: Building A7, Huafa Industrial Park, Fuyuan 1st Road, Zhancheng Community, Bao'an District, Shenzhen,Guangdong Province, China Product Name: Outdoor High-power Dual-band Wireless AP FCCID: 2A8NQ-HW622H-SE-01 Model(s): HW622H-SE-01, HW622H-SE, HW622G-SE, HW622G-SE-01, HW521H-SE, HW521H-SE-01, HW521G-SE-01 2.911(d)(5)(ii) Applicant filing We, [Shenzhen meiweisi Technology Co., Ltd] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to §1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: quxiao jiang Date: Nov. 24, 2025 Title: CEO Company name: Shenzhen meiweisi Technology Co., Ltd Signature: NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen meiweisi Technology Co., Ltd Agent Authorization Company: Shenzhen meiweisi Technology Co., Ltd Address: Building A7, Huafa Industrial Park, Fuyuan 1st Road, Zhancheng Community, Bao'an District, Shenzhen,Guangdong Province, China Product Name: Outdoor High-power Dual-band Wireless AP Model Number(s): HW622H-SE-01, HW622H-SE, HW622G-SE, HW622G-SE-01, HW521H- SE, HW521H-SE-01, HW521G-SE-01 Product Description: Outdoor High-power Dual-band Wireless AP We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Nov. 24, 2025 Name: quxiao jiang Title: CEO Company: Shenzhen meiweisi Technology Co., Ltd

Shenzhen meiweisi Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Nov. 24, 2025 Subject; Request for Confidentiality FCC ID: 2A8NQ-HW622H-SE-01 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: quxiao jiang Title: CEO

Shenzhen meiweisi Technology Co., Ltd Model Difference Declaration To Whom It May Concern, We, Shenzhen meiweisi Technology Co., Ltd (Outdoor High-power Dual-band Wireless AP); Trade Mark: N/A; Model Number: HW622H-SE-01, HW622H-SE, HW622G-SE, HW622G-SE-01, HW521H-SE, HW521H-SE-01, HW521G-SE-01; All model's the function, software and electric circuit are the same, only with model named different. Test sample model: HW622H-SE-01. Please contact me if you have any question. Signature: Date: Nov. 24, 2025 Name: quxiao jiang Title: CEO

FCC Software Configuration Control Declaration Rev1.1 Shenzhen meiweisi Technology Co., Ltd FCC Software Configuration Control Declaration Date: Nov. 24, 2025 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product Name: Outdoor High-power Dual-band Wireless AP Model Number: HW622H-SE-01, HW622H-SE, HW622G-SE, HW622G-SE-01, HW521H-SE, HW521H-SE-01, HW521G-SE-01 Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: quxiao jiang Date: Nov. 24, 2025 Title: CEO Signature of applicant

FCC ID LABEL: Ca. 60mm x 30mm Label Location FCC ID: 2A8NQ-HW622H-SE-01

MPE ESTIMATION FCC ID: 2A8NQ-HW622H-SE-01 1, According to §1.1310, Limit for General Population/ Uncontrolled Exposures Frequency Power density (mW/ cm 2 ) Averaging time(minutes) 300MHz----1.5GHz F/1500 30 1.5GHz---100GHz 1.0 30 Note: F= Frequency in MHz 2, Estimation Result Max PK Output power(dBm) Tune Up Power(dBm) Max Tune Up power(mW) Antenna Gain(dBi) Antenna Gain (numerical) MPE (mW/cm²) 2.4GWiFi ANT1 15.06 15±1(16) 39.811 8.05 6.38 0.05058 2.4GWiFi ANT2 14.98 14±1(15) 31.623 8.05 6.38 0.04017 MIMO / / / / / 0.09075 5.8GWiFi ANT1 8.04 8±1(9) 7.943 7.56 5.70 0.00901 5.8GWiFi ANT2 8.73 8±1(9) 7.943 7.56 5.70 0.00901 MIMO / / / / / 0.01802 Note: Note: The estimation distance is 20cm Note: PK Output power= conducted power in mW. G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna in cm Conducted power see the test report HK2508214730-1E/2E. 2.4G antenna 1 gain=8.05dBi, 5.2G antenna 2 gain=8.05dBi; 5.8G antenna 1 gain=7.56dBi, 5.8G antenna 2 gain=7.56dBi. 2.4GWIFI + 5.8GWIFI MPE (max)= 0.10877 (mW/cm²) When the minimum test separation distance is >20 cm, a distance of 20 cm is applied to determine RF Exposure test exclusion. The test exclusion threshold is 0.10877mW/cm² which is< 1.0mW/cm², RF Exposure testing is not required. -------The End-------

Page 1 of 114 Report No.: HK2508214730-2E FCC Test Report Test Report On Behalf of Shenzhen meiweisi Technology Co., Ltd For Outdoor High-power Dual-band Wireless AP Model No.: HW622H-SE-01, HW622H-SE, HW622G-SE, HW622G-SE-01, HW521H-SE, HW521H-SE-01, HW521G-SE-01 FCC ID: 2A8NQ-HW622H-SE-01 Prepared For: Shenzhen meiweisi Technology Co., Ltd Building A7, Huafa Industrial Park, Fuyuan 1st Road, Zhancheng Community, Bao'an District, Shenzhen,Guangdong Province, China Prepared By: Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Aug. 21, 2025 ~ Nov. 26, 2025 Date of Report: Nov. 26, 2025 Report Number: HK2508214730-2E Page 2 of 114 Report No.: HK2508214730-2E Test Result Certification Applicant’s Name ................. : Shenzhen meiweisi Technology Co., Ltd Address .................................. : Building A7, Huafa Industrial Park, Fuyuan 1st Road, Zhancheng Community, Bao'an District, Shenzhen,Guangdong Province, China Manufacturer's Name ........... : Shenzhen meiweisi Technology Co., Ltd Address .................................. : Building A7, Huafa Industrial Park, Fuyuan 1st Road, Zhancheng Community, Bao'an District, Shenzhen,Guangdong Province, China Product Description Trade Mark ............................. : N/A Product Name ........................ : Outdoor High-power Dual-band Wireless AP Model and/or Type Reference : HW622H-SE-01, HW622H-SE, HW622G-SE, HW622G-SE-01, HW521H-SE, HW521H-SE-01, HW521G-SE-01 Standards .............................. : FCC Rules and Regulations Part 15 Subpart E Section 15.407 ANSI C63.10: 2020 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of Performance of Tests ............ : Aug. 21, 2025 ~ Nov. 26, 2025 Date of Issue .......................................... : Nov. 26, 2025 Test Result .............................................. : Pass Testing Engineer Len Liao Technical Manager Sliver Wan Authorized Signatory Jason Zhou Page 3 of 114 Report No.: HK2508214730-2E Table of Contents 1. Summary ................................................................................................... 5 1.1 Test Procedures and Results ........................................................................................................... 5 1.2 Information of the Test Laboratory ................................................................................................. 5 1.3 Measurement Uncertainty ................................................................................................................ 6 2. EUT Description ........................................................................................ 7 2.1 General Description of EUT ............................................................................................................. 7 2.2 Operation Frequency Each of Channel ........................................................................................... 8 2.3 Operation of EUT during Testing ..................................................................................................... 8 2.4 Description of Test Setup ................................................................................................................. 9 2.5 Description of Support Units ......................................................................................................... 10 3. General Information ................................................................................ 11 3.1 Test Environment and Mode .......................................................................................................... 11 4. Test Results and Measurement Data .................................................... 16 4.1 AC Conducted Emission ................................................................................................................ 16 4.2 Maximum Conducted Output Power ............................................................................................. 20 4.3 6dB Emission Bandwidth ............................................................................................................... 24 4.4 26dB Bandwidth and 99% Occupied Bandwidth ......................................................................... 41 4.5 Power Spectral Density .................................................................................................................. 42 4.6 Band Edge ........................................................................................................................................ 60 4.7 Spurious Emission .......................................................................................................................... 81 4.8 Frequency Stability Measurement ............................................................................................... 107 4.9 Antenna Requirement ................................................................................................................... 110 5. Photographs of Test Setup .................................................................. 111 6. Photos of the EUT ................................................................................. 114 Page 4 of 114 Report No.: HK2508214730-2E ** Modified History ** Revision Description Issued Date Remark Revision 1.0 Initial Test Report Release Nov. 26, 2025 Jason Zhou Page 5 of 114 Report No.: HK2508214730-2E 1. Summary 1.1 Test Procedures and Results Requirement CFR 47 Section Res…

Text truncated - open the document above for the full version.

Page 60 of 114 Report No.: HK2508214730-2E 4.6 Band Edge 4.6.1 Test Specification Test Requirement: FCC CFR47 Part 15E Section 15.407 Test Method: ANSI C63.10: 2020 Limit: (1)For transmitters operating in the 5.725-5.85 GHz band: (i) All emissions shall be limited to a level of −27 dBm/MHz at 75 MHz or more above or below the band edge increasing linearly to 10 dBm/MHz at 25 MHz above or below the band edge, and from 25 MHz above or below the band edge increasing linearly to a level of 15.6 dBm/MHz at 5 MHz above or below the band edge, and from 5 MHz above or below the band edge increasing linearly to a level of 27 dBm/MHz at the band edge. The limit of frequency below 1GHz and which fall in restricted ba nds should complies 15.209. Test Setup: Test Mode: Transmitting mode with modulation Page 61 of 114 Report No.: HK2508214730-2E Test Procedure: 1. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter camber. The table was rotated 360 degrees to determine the position of the highest radiation. 2. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. 3. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rota table was turned from 0 degrees to 360 degrees to find the maximum reading. 5. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. 6. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi peak or average method as specified and then reported in a data sheet. Test Result: PASS Page 62 of 114 Report No.: HK2508214730-2E 4.6.2 Test Instruments Radiated Emission Test Site (966) Name of Equipment Manufacturer Model Serial Number Calibration Date Calibration Due Spectrum analyzer Agilent N9020A HKE-025 Feb. 19, 2025 Feb. 18, 2026 Spectrum analyzer Agilent N9020A HKE-117 Feb. 19, 2025 Feb. 18, 2026 Spectrum analyzer R&S FSV3044 HKE-126 Feb. 19, 2025 Feb. 18, 2026 Preamplifier EMCI EMC051845SHKE-006 Feb. 19, 2025 Feb. 18, 2026 Preamplifier Schwarzbeck BBV 9743 HKE-016 Feb. 19, 2025 Feb. 18, 2026 Preamplifier A.H. Systems SAS-574 HKE-182 Feb. 19, 2025 Feb. 18, 2026 6dB Attenuator Pasternack 6db HKE-184 Feb. 19, 2025 Feb. 18, 2026 EMI Test Receiver Rohde & Schwarz ESR-7 HKE-010 Feb. 19, 2025 Feb. 18, 2026 Broadband Antenna Schwarzbeck VULB9168 HKE-167 Feb. 21, 2024 Feb. 20, 2026 Loop Antenna COM-POWER AL-130R HKE-014 Feb. 21, 2024 Feb. 20, 2026 Horn Antenna Schwarzbeck 9120D HKE-013 Feb. 21, 2024 Feb. 20, 2026 EMI Test Software Tonscend JS32-RE 5.0.0HKE-082 N/A N/A RSE Test Software Tonscend JS36-RSE 5.0.0HKE-184 N/A N/A Page 63 of 114 Report No.: HK2508214730-2E 4.6.3 Test Data All modes of operation were investigated and the worst-case emissions of ANT.2 are reported. Operation Mode: 802.11a Mode with 5.8G TX CH Low Horizontal: FrequencyMeter ReadingFactorEmission LevelLimitsMargin (MHz)(dBμV)(dB)(dBμV/m)(dBμV/m)(dB) 565054.03-2.0651.9768.216.23peak 570086.57-1.9684.61105.220.59peak 572093.45-2.8790.58110.820.22peak 5725110.25-2.14108.11122.214.09peak Detector Type Remark: Factor = Cable loss + Antenna factor + Attenuator – Preamplifier; Level = Reading + Factor; Margin = Limit - Level. Vertical: FrequencyMeter ReadingFactorEmission LevelLimitsMargin (MHz)(dBμV)(dB)(dBμV/m)(dBμV/m)(dB) 565057.93-2.0655.8768.212.33peak 570086.69-1.9684.73105.220.47peak 572091.74-2.8788.87110.821.93peak 5725109.97-2.14107.83122.214.37peak Detector Type Remark: Factor = Cable loss + Antenna factor + Attenuator – Preamplifier; Level = Reading + Factor; Margin = Limit - Level. Page 64 of 114 Report No.: HK2508214730-2E Operation Mode: 802.11a Mode with 5.8G TX CH High Horizontal: FrequencyMeter ReadingFactorEmission LevelLimitsMargin (MHz)(dBμV)(dB)(dBμV/m)(dBμV/m)(dB) 5850102.41-1.97100.44122.221.76peak 585594.68-2.1392.55110.818.25peak 587588.41-2.6585.76105.219.44peak 592551.69-2.2849.4168.218.79peak Remark: Factor = Cable loss + Antenna factor + Attenuator – Preamplifier; Level = Reading + Factor; Margin = Limit - Level. Detector Type Vertical: FrequencyMeter ReadingFactorEmission LevelLimitsMargin (MHz)(dBμV)(dB)(dBμV/m)(dBμV/m)(dB) 5850102.86-1.97100.89122.221.31peak 585592.69-2.1390.56110.820.24peak 587588.98-2.6586.33105.218.87peak 592554.69-2.2852.4168.215.79peak Remark: Factor = Cable loss + Antenna factor + Attenuator – Preamplifier; Level = Reading + Factor; Margin = Limit - Level. Detector Type Page 65 of 114 Report No.: HK2508214730-2E Operation Mode: 802.11n20 Mode with 5.8G TX CH Low Horizontal: FrequencyMeter ReadingFactorEmission LevelLimitsMargin (MHz)(dBμV)(dB)(dBμV/m)(dBμV/m)(dB) 565057.02-2.0654.9668.213.24peak 570089.69-1.9687.73105.217.47peak 572095.41-2.8792.54110.818.26peak 5725110.82-2.14108.68122.213.52peak Detector Type Remark: Factor = Cable loss + Antenna factor + Attenuator – Preamplifier; Level = Reading + Factor; Margin = Limit - Level. Vertical: FrequencyMeter ReadingFactorEmission LevelLimitsMargin (MHz)(dBμV)(dB)(dBμV/m)(dBμV/m)(dB) 565057.31-2.0655.2568.212.95peak 570089.68-1.9687.72105.217.48peak 572095.96-2.8793.09110.817.71peak 5725110.36-2.14108.22122.213.98peak Detector Type Remark: Factor = Cable loss + Antenna factor + Attenuator – Preamplifier; Level = Reading + Factor; Margin = Limit - Level. Page 66 of 114 Report No.: HK2508214730-2E Operation Mode: 802.11n20 Mode with 5.8G TX CH High Horizontal: FrequencyMeter ReadingFactorEmission LevelLimitsMargin (MHz)(dBμV)(dB)(dBμV/m)(d…

Text truncated - open the document above for the full version.

Test Model: HW622H-SE-01 Radiated Emission AC Conducted Emission RF Conducted Emission 2.4GWiFi: ANT 1 ANT 2 RF Conducted Emission 5.8GWiFi: ANT 1 ANT 2