2A8PMTGTMMR6833-RHYPER MICRO ROBO MONSTER TRUCK

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.changes or modifications not expressly approved by the party responsible for compliance could void the user ’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

UNITED STATES DESIGNATED AGENT LETTER Date:7/27/2026 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: HYPER BICYCLES,INC Company Name: HYPER BICYCLES,INC Grantee Code: 2A8PM FRN: 0032885279 Contact Name: John Lee Contact Name: John Lee Address: 177 MALAGA PARK DRIVE MALAGA, NJ 08328 USA Address: 177 MALAGA PARK DRIVE MALAGA, NJ 08328 USA City/Province/Zip: New Jersey 08328 United States City/Province/Zip: New Jersey 08328 United States Telephone: 8566940352 Telephone: 8566940352 Fax: 856-694-0352 Fax: 856-694-0352 Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: < 2A8PMTGTMMR6833-T and 2A8PMTGTMMR6833-R> ATTN: Director of Certification: We, HYPER BICYCLES,INC understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, HYPER BICYCLES,INC acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. Applicant Name (Printed): John Lee Title: Manager Signature:

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name HYPER BICYCLES,INC Address 177 MALAGA PARK DRIVE MALAGA,NJ 08328 USA FRN 0032885279 Grantee Code 2A8PM FCC ID: 2A8PMTGTMMR6833-R Authorized Contact Name John Lee Contact Phone 8566940352 Contact Email [email protected] HYPER BICYCLES,INC (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant [ is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: Date: 7/27/2026 Print Name: John Lee Title: MANAGER *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Application Declaration QSF21-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name HYPER BICYCLES,INC Address 177 MALAGA PARK DRIVE MALAGA,NJ 08328 USA FRN 0032885279 Grantee Code 2A8PM FCC ID: 2A8PMTGTMMR6833-R Authorized Contact Name John Lee Contact Phone 8566940352 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this appli cation, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules. c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that prod uction units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and a gree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP- 100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISE D as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review , certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of t he Anti- Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the d efinition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Applic ation Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 7/27/2026 Print Name: John Lee Title: MANAGER *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

HYPER BICYCLES,INC Date: 7/27/2026 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2A8PMTGTMMR6833-R To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own.. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with HYPER BICYCLES,INC This authorization is valid until further written notice from the applicant. Print Name: John Lee Title: MANAGER Signature: On behalf of Company: HYPER BICYCLES,INC Telephone: 8566940352 E-mail: [email protected]

HYPER BICYCLES,INC TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2A8PMTGTMMR6833-R LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 0 days from the grant date, whichever is less. If the device is marketed within the aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Sincerely, Print Name: John Lee Title: MANAGER Signature: On behalf of Company: HYPER BICYCLES,INC Telephone: 8566940352 E-mail: [email protected]

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 1 of 4 Appendix External Photos for FYCR2606000175ET FCC ID: 2A8PMTGTMMR6833-R Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 2 of 4 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 3 of 4 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 4 of 4 - End of the Appendix -

1.5*0.9cm

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 1 of 6 Appendix Internal Photos for FYCR2606000175ET FCC ID: 2A8PMTGTMMR6833-R Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 2 of 6 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 3 of 6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 4 of 6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 5 of 6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 6 of 6 - End of the Appendix -

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600017505 Page: 1 of 10 TEST REPORT Application No.: FYCR2606000175ET(SZHL260502500402TY) Applicant: HYPER BICYCLES, INC. Address of Applicant: 177 MALAGA PARK DRIVE MALAGA, NJ 08328 USA Manufacturer/ Factory: SHANTOU XIAODI INTELLIGENT TECHNOLOGY CO., LTD. Buyer: TARGET SOURCING SERVICES Supplier: HYPER BICYCLES, INC. Equipment Under Test (EUT): EUT Name: HYPER MICRO ROBO MONSTER TRUCK Item No.: TGT-MMR-6833 Brand Name: HYPER Labeled Age Grading: 07 Country Of Origin: China Country Of Destination: United States FCC ID: 2A8PMTGTMMR6833-R Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2026-06-25 Date of Evaluation: 2026-07-04 to 2026-07-22 Date of Issue: 2026-07-24 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600017505 Page: 2 of 10 Revision Record Version Chapter Date Modifier Remark 01 2026-07-24 Original Authorized for issue by: Byron Liang/Project Engineer Tree Zhan/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600017505 Page: 3 of 10 2 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Contents ............................................................................................................................................. 3 3 General Information............................................................................................................................ 4 3.1 General Description of E.U.T. ....................................................................................................... 4 3.2 Details of E.U.T. ........................................................................................................................... 4 3.3 Separation Distance ..................................................................................................................... 4 3.4 Test Location ............................................................................................................................... 5 3.5 Test Facility .................................................................................................................................. 5 3.6 Deviation from Standards ............................................................................................................. 5 3.7 Abnormalities from Standard Conditions ....................................................................................... 5 4 FCC Radiofrequency radiation exposure limits ................................................................................ 6 4.1 Blanket 1 mW Blanket Exemption ................................................................................................. 6 4.2 MPE-based Exemption ................................................................................................................. 6 4.3 SAR-based Exemption ................................................................................................................. 7 5 Measurement and Calculation ..........................................................................................................10 5.1 Maximum transmit power ............................................................................................................10 5.2 RF Exposure Calculation .............................................................................................................10 6 EUT Constructional Details (EUT Photos) ........................................................................................10 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600017505 Page: 4 of 10 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: Rechargeable battery DC 3.7V,150mAh, 0.555Wh for car,Charged by DC 5V Operation Frequency: 2422.1MHz-2472.1MHz Modulation Type: GFSK Number of Channels: 49 Antenna Type: PCB Antenna Antenna Gain: -0.12dBi Remark:The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600017505 Page: 5 of 10 3.4 Test Location All tests were performed at: Compliance Certification Services（Kunshan）Inc. Shenzhen branch. Fuyong lab. Xinlong TechnoPark,Fengtang Road, Fuyong Subdistrict, Bao’an, Shenzhen, China Tel: +86 755 8866 3988 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 6606.01) Compliance Certification Services（Kunshan）Inc. Shenzhen branch is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 6606.01. • FCC –Designation Number: CN1322 Compliance Certification Services（Kunshan）Inc. Shenzhen branch has been recognized as an accredited testing laboratory. Designation Number: CN1322. Test Firm Registration Number: 718073 • Innovation, Science and Economic Development Canada Compliance Certification Services（Kunshan）Inc…

Text truncated - open the document above for the full version.

Manufacturer： TA Technology (Shanghai) Co., Ltd. Address Building 1, No. 400, Fangchun Road, China (Shanghai) Pilot Free Trade Zone antenna design specification Antenna dimensions as blow picture show: the material is FR4 and the thickness is 1.6mm of PCB. ANT1: Gian and Efficiency Frequency (MHz) Efficiency(%)Gain(dBi) 230013.17-1.57 232019.08-0.76 234022.65-0.41 236022.62-0.12 238018.03-0.42 240014.86-0.93 242012.54-1.17 24409.92-2.03 24607.46-2.47 24806.11-2.98 25005.39-3.83 3D and 1DRadiation Patterns Acceptance of antenna specifications Total P o w e r ( d B m ) -25 0 -20 -15 -10 -5 X Y Z Azimuth = 0.0 Elevation = 0.0 Roll = 0.0 2440MTRP1 Cut1 P o w e r ( d B m ) Angle (? Scale: 2/div Min: -16 Max: -2 0 180 30 210 60 240 90270 120 300 150 330 Cut2 P o w e r ( d B m ) Angle (? Scale: 2/div Min: -22 Max: 0 0 180 30 210 60 240 90270 120 300 150 330 Cut3 P o w e r ( d B m ) Angle (? Scale: 2/div Min: -14 Max: -2 0 180 30 210 60 240 90270 120 300 150 330

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600017503 Page: 1 of 32 TEST REPORT Application No.: FYCR2606000175ET(SZHL260502500402TY) Applicant: HYPER BICYCLES, INC. Address of Applicant: 177 MALAGA PARK DRIVE MALAGA, NJ 08328 USA Manufacturer/ Factory: SHANTOU XIAODI INTELLIGENT TECHNOLOGY CO., LTD. Buyer: TARGET SOURCING SERVICES Supplier: HYPER BICYCLES, INC. Equipment Under Test (EUT): EUT Name: HYPER MICRO ROBO MONSTER TRUCK Item No.: TGT-MMR-6833 Brand Name: HYPER Labeled Age Grading: 07 Country Of Origin: China Country Of Destination: United States FCC ID: 2A8PMTGTMMR6833-R Standard(s) : 47 CFR Part 15, Subpart C 15.249 Date of Receipt: 2026-06-25 Date of Test: 2026-07-04 to 2026-07-22 Date of Issue: 2026-07-24 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600017503 Page: 2 of 32 Revision Record Version Chapter Date Modifier Remark 01 2026-07-24 Original Authorized for issue by: Byron Liang/Project Engineer Tree Zhan/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600017503 Page: 3 of 32 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.249 N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Field Strength of the Fundamental Signal (15.249(a)) 47 CFR Part 15, Subpart C 15.249 ANSI C63.10- 2020+Cor.1-2023 Section 6.5&6.6 47 CFR Part 15, Subpart C 15.249(a) Pass Restricted Band Around Fundamental Frequency ANSI C63.10- 2020+Cor.1-2023 Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.249(d) & 15.209 Pass Radiated Emissions Below 1GHz ANSI C63.10- 2020+Cor.1-2023 Section 6.4&6.5 47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d) Pass Radiated Emissions Above 1GHz ANSI C63.10- 2020+Cor.1-2023 Section 6.6 47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d) Pass 20dB Bandwidth ANSI C63.10- 2020+Cor.1-2023 Section 6.9 47 CFR Part 15, Subpart C 15.215 Pass Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600017503 Page: 4 of 32 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 7 4.3 Measurement Uncertainty .................................................................................................................. 7 4.4 Test Location ...................................................................................................................................... 8 4.5 Test Facility ........................................................................................................................................ 8 4.6 Deviation from Standards ................................................................................................................... 8 4.7 Abnormalities from Standard Conditions ........................................................................................... 8 5 Equipment List .......................................................................................................................................... 9 6 Radio Spectrum Technical Requirement ............................................................................................. 12 6.1 Antenna Requirement ...................................................................................................................... 12 6.1.1 Test Requirement: ....................................................................................................................... 12 6.1.2 Conclusion ................................................................................................................................... 12 7 Radio Spectrum Matter Test Results .................................................................................................... 13 7.1 20dB Bandwidth ............................................................................................................................... 13 7.1.1 E.U.T. Operation .......................................................................................................................... 13 7.1.2 Test Mode Description ................................................................................................................. 13 7.1.3 Test Setup Diagram ..................................................................................................................... 13 7.1.4 Measurement Procedure and Data............................................................................................. 13 7.2 Field Strength of the Fundamental Signal (15.249(a)) ..................................................................... 16 7.2.1 E.U.T. Operation .......................................................................................................................... 16 7.2.2 Test Mode Description ...........................................…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A04 Rev. A/0 Page: 1 of 4 Appendix Test Setup Photos for FYCR2606000175ET FCC ID: 2A8PMTGTMMR6833-R Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A04 Rev. A/0 Page: 2 of 4 Test Setup Photo Field Strength of the Fundamental Signal (15.249(a)) Restricted Band Around Fundamental Frequency Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A04 Rev. A/0 Page: 3 of 4 Radiated Emissions Below 1GHz Radiated Emissions Above 1GHz Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A04 Rev. A/0 Page: 4 of 4 - End of the Appendix -