2A8R5QST009B15W Wireless Charging Pad

Overview The charger makes it easy to charge your phone without having to look for sockets and keep track of cables – just place the phone on the tabletop or shelf exactly above the charger. Instructions for use Connect the charger cable to the power adapter and plug it into the wall socket For wireless charging, place the device to be charged on top of the sticker sign on the desk. The device must be placed directly over the sticker sign on the desk for the charging function to work optimally. Note that on some devices you may have to activate wireless charging in settings. If your battery is completely discharged, it may take a few minutes before it starts charging. This is entirely normal. You can see that the battery has begun charging when the battery symbol appears on your device. The charging function works with every material except metal Devices may get warm during charging, this is completely normal and they will gradually cool down again after they are fully charged Charging time may vary based on the devices’ s battery capacity, charge level, the age of the battery, and the temperature in the surrounding area Unplug the charger from the power source before cleaning and when it is not in use. Indoor use only Trouble Shooting The charger will stop automatically when a metal or other foreign object is in the charging area. Remove the object to continue charging. If charging is stopped for an unknown reason, just move the mobile phone away and then place it back in the charging area. Please do not install the charger under the metallic table. Please do not toss, press, or puncture the wireless charger. High external pressure will cause damage to the device. My phone is not charging. Generally, the wireless charging coil is located in the middle of a phone, so please make sure your phone is placed over the center of the magnetic sticker, If the phone case is too thick or has metal / magnetic accessories, your phone may not charge. The wireless charger needs to avoid placing smart cards such as ID cards, credit cards, bus cards, access cards, etc. in the charging area to avoid being damaged. Power adapter issue: Only use the original plug pack When installing the wireless charger, please obtain a safe distance above 35mm between the wireless charger and metal objects. It should be obtaining a safety distance above 300mm It cannot charge some small Qi electronic devices such as TWS Bluetooth headsets due to the limitation of coil size NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: THE LOVESAC COMPANY Address: TWO LANDMARK SQUARE SUITE 300 STAMFORD CT 06901 Product Name: 15W Wireless Charging Pad FCC ID: 2A8R5QST009B Model(s): QST009B 2.911(d)(7) USA Designated Agent for Service of Process We, [THE LOVESAC COMPANY] (“the applicant”) designate [THE LOVESAC COMPANY] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent & Applicant Company name: THE LOVESAC COMPANY Address: TWO LANDMARK SQUARE SUITE 300 STAMFORD CT 06901 FRN：0032909400 Contact Name: Claudia Sanchez Telephone No: 475 214 7302 Email: [email protected] Signature: Title Compliance Manager Date: Apr. 23, 2024 2.911 (d)(7)USA Agent v1.2 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

THE LOVESAC COMPANY TWO LANDMARK SQUARE SUITE 300 STAMFORD CT 06901 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Apr. 23, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A8R5QST009B FRN: 0032909400 [THE LOVESAC COMPANY] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Name: Claudia Sanchez Title: Compliance Manager

THE LOVESAC COMPANY TWO LANDMARK SQUARE SUITE 300 STAMFORD CT 06901 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Apr. 23, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2A8R5QST009B FRN: 0032909400 [THE LOVESAC COMPANY] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Name: Claudia Sanchez Title: Compliance Manager

THE LOVESAC COMPANY TWO LANDMARK SQUARE SUITE 300 STAMFORD CT 06901 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Apr. 23, 2024 Subject; Request for Confidentiality FCC ID: 2A8R5QST009B To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Claudia Sanchez Title: General Manager

THE LOVESAC COMPANY TWO LANDMARK SQUARE SUITE 300 STAMFORD CT 06901 Declaration Letter FCC ID: 2A8R5QST009B Pursuant to KDB 680106 of the THE LOVESAC COMPANY Hereby declare our product which is an inductive wireless power transfer applications that meet all of the following requirements are not required to submit a KDB inquiry for devices approved usinga PAG for equipment approved using certification to address RF exposure compliance. The EUT does comply with item 5.2 of KDB 680106 D01v04r01 as follows table: Requirements of KDB 680106 section 5.2 Yes or No Description Wireless power transfer frequency is below 1MHz Yes The device operate in the frequency range 127kHz. Output power from each primary coil is less than 15 watts Yes The maximum output power of the primary coil is 15W. The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. Yes The transfer system includes single coil that is able to detect receiver device. Client device is placed directly in contact with the transmitter. Yes Client device is placed directly in contact with the transmitter. Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). Yes Device can be used in Mobile conditions. The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Yes The EUT H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Yours sincerely, (Applicant signature) Name: Claudia Sanchez Title: General Manager

Report No.: AGC13749240401AP02 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC13749240401AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC13749240401AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC13749240401AP02 Page 4 of 4 RIGHT VIEW OF EUT ADAPTER VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 10mm*30mm FCC ID:2A8R5QST009B

Report No.: AGC13749240401AP01 Page 1 of 4 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC13749240401AP01 Page 2 of 4 OPEN VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC13749240401AP01 Page 3 of 4 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC13749240401AP01 Page 4 of 4 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) ****************************************End of Report************************************* WPT Antenna

Page 1 of 13 RF Exposure Report Report No.: AGC13749240401FH01 FCC ID : 2A8R5QST009B APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : 15W Wireless Charging Pad BRAND NAME : Lovesac MODEL NAME : QST009B APPLICANT : THE LOVESAC COMPANY DATE OF ISSUE : Apr. 22, 2024 STANDARD(S) : KDB680106 D01 RF Exposure Wireless Charging Base App v04 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC13749240401FH01 Page 2 of 13 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Apr. 22, 2024 Valid Initial Release Report No.: AGC13749240401FH01 Page 3 of 13 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................. 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility .............................................................................................................................................. 6 3.3 Environmental Conditions ........................................................................................................................ 7 3.4 Measurement Uncertainty ........................................................................................................................ 7 3.5 List of Equipment Used ............................................................................................................................ 7 4. Equipment Used in Tested System ............................................................................................................... 8 5. Description of Test Modes ............................................................................................................................. 8 6. RF Exposure Measurement ............................................................................................................................ 9 6.1 Refer Evaluation Method ......................................................................................................................... 9 6.2 Measurement Limits ................................................................................................................................. 9 6.3 Measurement Setup ............................................................................................................................... 10 6.4 Measurement Procedure ........................................................................................................................ 11 6.5 Measurement Results ............................................................................................................................ 12 Appendix I: Photographs of Test Setup .......................................................................................................... 13 Report No.: AGC13749240401FH01 Page 4 of 13 1. General Information Applicant THE LOVESAC COMPANY Address TWO LANDMARK SQUARE SUITE 300 STAMFORD CT 06901 Manufacturer jjPlus Corporation Address 15F-7, No2, Jianba Rd., Zhonghe Dist., New Taipei City 235, Taiwan Factory NEW WING INTERCONNECT TECHNOLOGY(BAC GIANG) CO., LTD. Address Van Trung Industrial Park, Van Trung Commune, Viet Yen District, Bac Giang Province, Vietnam Product Designation 15W Wireless Charging Pad Brand Name Lovesac Test Model QST009B Series Model(s) N/A Difference Description N/A Date of receipt of test item Apr. 09, 2024 Date of Test Apr. 09, 2024 - Apr. 22, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure (WPT_MPE)-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Cici Li (Project Engineer) Apr. 22, 2024 Reviewed By Calvin Liu (Reviewer) Apr. 22, 2024 Approved By Max Zhang Authorized Officer Apr. 22, 2024 Report No.: AGC13749240401FH01 Page 5 of 13 2. Product Information 2.1 Product Technical Description Equipment Type WPT System Operation Frequency Band 127kHz Hardware Version TB09_V2.0 Software Version V4.10.9 Modulation Type FSK Field Strength of Fundamental 77.35dBuV/m (Max) Antenna Designation Coil Antenna Power Supply DC 19V, 2A Wireless Charging Output Power DC 9V, 1.67A(15W) Adapter Information Model: MX36W1-1902000U Input: 100-240V~50-60Hz Output: 19.0V, 2.0A Report No.: AGC13749240401FH01 Page 6 of 13 3. Test Environment 3.1 Address of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to FOLLOW CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any ad…

Text truncated - open the document above for the full version.

Page 1 of 30 FCC Test Report Report No.: AGC13749240401FR10 FCC ID : 2A8R5QST009B APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : 15W Wireless Charging Pad BRAND NAME : Lovesac MODEL NAME : QST009B APPLICANT : THE LOVESAC COMPANY DATE OF ISSUE : Apr. 22, 2024 STANDARD(S) : FCC Part 15 Subpart C REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC13749240401FR10 Page 2 of 30 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Apr. 22, 2024 Valid Initial Release Report No.: AGC13749240401FR10 Page 3 of 30 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................. 6 2.2 Related Submittal(S) / Grant (S) .............................................................................................................. 7 2.3 Test Methodology ..................................................................................................................................... 7 2.4 Special Accessories ................................................................................................................................. 7 2.5 Equipment Modifications .......................................................................................................................... 7 2.6 Antenna Requirement .............................................................................................................................. 7 3. Test Environment ............................................................................................................................................ 8 3.1 Address of The Test Laboratory ............................................................................................................... 8 3.2 Test Facility .............................................................................................................................................. 8 3.3 Environmental Conditions ........................................................................................................................ 9 3.4 Measurement Uncertainty ........................................................................................................................ 9 3.5 List of Equipment Used .......................................................................................................................... 10 4.System Test Configuration ............................................................................................................................. 11 4.1 EUT Configuration .................................................................................................................................. 11 4.2 EUT Exercise .......................................................................................................................................... 11 4.3 Configuration of Tested System .............................................................................................................. 11 4.4 Equipment Used in Tested System ........................................................................................................ 11 4.5 Summary of Test Results ....................................................................................................................... 12 5. Description of Test Modes ........................................................................................................................... 13 6. Field Strength of Fundamental .................................................................................................................... 14 6.1 Measurement Limits ............................................................................................................................... 14 6.2 Measurement Procedure ....................................................................................................................... 15 6.3 Field Strength Calculation ...................................................................................................................... 16 6.4 Measurement Setup ............................................................................................................................... 17 6.5 Measurement Result .............................................................................................................................. 18 7. 20 dB Bandwidth Measurement ................................................................................................................... 24 7.1 Provisions Applicable ............................................................................................................................. 24 7.2 Measurement Procedure ....................................................................................................................... 24 7.3 Measurement Setup ............................................................................................................................... 24 7.4 Measurement Result .............................................................................................................................. 25 8. AC Power Line Conducted Emission Test .................................................................................................. 26 Report No.: AGC13749240401FR10 Page 4 of 30 8.1 Measurement Limits ............................................................................................................................... 26 8.2 Measurement Setup .....................................................................................................…

Text truncated - open the document above for the full version.

Report No.: AGC13749240401AP01 Page 1 of 4 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 30MHz RADIATED EMISSION TEST SETUP BELOW 1GHz Report No.: AGC13749240401AP01 Page 2 of 4 AC POWER LINE CONDUCTED TEST SETUP RF HEALTH ASSESSMENT TEST PHOTOS H-Field & E-Field Strength_ Position A Report No.: AGC13749240401AP01 Page 3 of 4 H-Field & E-Field Strength_ Position B H-Field & E-Field Strength_ Position C Report No.: AGC13749240401AP01 Page 4 of 4 H-Field & E-Field Strength_ Position D H-Field & E-Field Strength_ Position E ****************************************End of Report*************************************