2A8RBAN958NA5G module with GSM, WCDMA, LTE and 5G NR

FIBOCOM AN958-NA Module Hardware User Guide Version: 1.8 Date: 2022-04-19 Fibocom Auto Inc. Confidentiality Secret Applicability Model No. Product Model Software Baseline Applicable Customer Description 1 AN958-NA -- -- Support frequency bands in North Americas regions. See Table 2-1 for frequency band information. Change History Version Date Author Reviewed by Approved by Change Description 1.0 2021-03-03 Deng Jie/Che Qingcheng Dai Wenhui Dai Wenhui Initial version 1.1 2021-03-31 Deng Jie/Che Qingcheng Dai Wenhui Dai Wenhui  Updated the recommended layout rules of RGMII and PCIe.  Updated the WCDMA features description.  Deleted section 1.2 "References."  Added the power supply current description of the module. 1.2 2021-06-16 Che Qingcheng Dai Wenhui Dai Wenhui Updated the frequency band configuration, with n5 and n28 frequency bands added. 1.3 2021-07-26 Li Gao/Che Qingcheng Dai Wenhui Dai Wenhui  Updated the GPIO name.  Updated the RF antenna interface configuration information. 1.4 2021-09-02 Li Gao/Che Qingcheng Dai Wenhui Dai Wenhui  Modified the GSM frequency band information in NA version.  Updated the description of some pins. 1.5 2021-11-11 Che Qingcheng Dai Wenhui Dai Wenhui Added the AN958 discrete solution. 1.6 2021-12-27 Qi Jianwen Dai Wenhui Dai Wenhui Added the CA combinations in Chinese version and optimized the document format. 1.7 2022-02-09 Mo Wei Dai Wenhui Dai Wenhui Updated pin distribution diagram and revised the function description of some pins. 1.8 2022-04-19 Che Qingcheng Dai Wenhui Dai Wenhui  Normalized the AN958 series manuals.  Optimize related contents according to review results Copyright Statement Copyright © 2018-2022 Fibocom Auto Inc. All rights reserved. Without the prior written permission of the copyright holder, any company or individual is prohibited to excerpt, copy any part of or the entire document, or distribute the document in any form. Notice The document is subject to update from time to time owing to the product version update or other reasons. Unless otherwise specified, the document only serves as the user guide. All the statements, information and suggestions contained in the document do not constitute any explicit or implicit guarantee. Trademark The trademark is registered and owned by Fibocom Auto Inc. The trademark is registered and owned by Fibocom Wireless Inc. Contact Company website: http://www.fibocom.com/ Address: Floor 13, Block A, Building 6, Shenzhen International Innovation Valley, Dashiyi Road, Xili Community, Xili Street, Nanshan District, Shenzhen Tel: +86 755-26733555 Fax: +86 755-26520841 Contents Applicability Model ...................................................................................................................................................... 2 Change History ............................................................................................................................................................. 2 Fibocom AN958&AN958T Series Module Hardware User Guide The copyright of this document belongs to Fibocom Auto Inc. and may not be reproduced without approval. 4/52 1 About This Document .................................................................................................................................................. 6 1.1 Description ........................................................................................................................................................ 6 1.2 Safety Instruction .............................................................................................................................................. 6 2 Product Overview ........................................................................................................................................................ 7 2.1 General Description .......................................................................................................................................... 7 2.2 Product Specifications ....................................................................................................................................... 7 2.2.1 RF Characteristics .................................................................................................................................. 7 2.2.2 Key Features .......................................................................................................................................... 8 2.3 CA Combinations ............................................................................................................................................... 9 2.3.1 CA Combinations Supported by AN958-NA ........................................................................................... 9 2.4 EN-DC Combinations ....................................................................................................................................... 10 2.4.1 EN-DC Combinations Supported by AN958-NA ...................................................................................10 2.5 Hardware Block Diagram ................................................................................................................................. 13 3 Application Interfaces ................................................................................................................................................ 15 3.1 LGA Interface ................................................................................................................................................... 15 3.1.1 Pin Distribution ....................................................................................................................................15 3.1.2 Pin Definition .......................................................................................................................................15 3.2 Power Supply ...............................................................................................…

Text truncated - open the document above for the full version.

Fibocom Auto Inc. To: Federal Communications Commission Date: 2023/03/15 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(ii) (KDB 986446 D01 Covered Equipment) [Fibocom Auto Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Fibocom Auto Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered List as an entity producing “covered” equipment. Type of Equipment subject to FCC Certification: FCC ID: 2A8RBAN958NA If you have any questions, please feel free to contact me Contact Person: Cupid Xu Position in the Company: Company Representative Date of Signature: 2023/03/14 ___________________________ Signatory (signature of the applicant)

Fibocom Auto Inc. 13th Floor, Building A, Building 6, International Innovation Valley,Xili Street, Shenzhen Tel: +8613528753150 ; Fax: +86-755-26520841 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, [Fibocom Auto Inc. Grantee Code 2A8RB] (“the applicant”) certifies that, as of the date of the filing of application, [Fibocom Wireless USA] (“the agent”) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The information of agent are: U.S. Agent: Fibocom Wireless USA FCC Registration Number (FRN): 0033437914 Physical U.S. address: 5909 Peachtree Dunwoody Rd Ste 910 Atlanta, GA 30328 United Statess Contact: Lei Yao Phone: +01 (469)463-6983 Email:[email protected] The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Signed by the Applicant Signed by the Agent Name: Cupid Xu Name: Lei Yao Email: [email protected] Email: [email protected] Date: March 15, 2023 Date: March 15, 2023

Fibocom Auto Inc. 13th Floor, Building A, Building 6, International Innovation Valley,Xili Street, Shenzhen,China Date: February 23, 2023 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: 2A8RBAN958NA To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. ⚫ Schematic Diagram ⚫ Block Diagram ⚫ Part List ⚫ Operational Description ⚫ Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. ⚫ External Photos ⚫ Internal Photos ⚫ Test Setup Photos ⚫ User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, ____ Cupid Xu [email protected]

RF_160, Issue 04 Fibocom Auto Inc. Declaration of Authorization We Name: Fibocom Auto Inc. Address: 13th Floor, Building A, Building 6, International Innovation Valley,Xili Street City: Shenzhen Country: China Declare that: Name Representative of agent: Well Wei Agent Company name: SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd Address: South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone City: Suzhou Country China is authorized to apply for Certification of the following product(s): Product description: 5G Module Type designation: AN958-NA Trademark: Fibocom on our behalf. Date: 2022/12/02.. City:  Shenzhen .. Name: Cupid Xu.. Email: [email protected]...... Signature:  .

RF_734_02 04 April 16 Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: 2A8RBAN958NA Items to be covered by Single modular transmitters. Answer from applicant 1. The modular transmitter must have its own RF shielding. Yes, please see exhibition external photos 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Yes, The modular has buffer modulation /data inputs 3. The modular transmitter must have its own power supply regulation. Yes, please see the schem.pdf 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). Yes, The requirements of antenna connector and spurious emission have been fulfilled. Please refer to the test report exhibition. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Yes, Please refer to the setup photo exhibition for the stand-alone configuration 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). Yes, The Module will be label with its own FCC ID ,and the instruction on the labelling rule of the end product has been stated in the user manual of this module .please refer to the label and user manual exhibition. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. Yes, The required FCC rule has been fulfilled and all the instruction for maintaining compliance have been clearly stated in the user manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. Yes, Please refer exhibition RF exposure for the compliance of MPE RF exposure rule. RF_734_02 04 April 16 Note: A limited modular approval (LMA) may be granted for single modular transmitters that comply partially with the requirements above. Name and surname of applicant (or authorized representative):_ Signature: ................... Date: 2022/12/05.. City:  Shenzhen .. Name:  Cupid Xu.. Email: [email protected]....

Page 1 of 8 1 Photographs - EUT Constructional Details FCC ID: 2A8RBAN958NA IC ID: 29662-AN958NA Test auxiliary PCB board and surrounding photos GNSS ANT2 3/4/5G diversity RX Main ANT1 2/3/4/5G TX and RX ANT3 3/4/5G MIMO main RX ANT4 3/4/5G MIMO diversity RX Page 2 of 8 Page 3 of 8 Page 4 of 8 Page 5 of 8 Page 6 of 8 X Page 7 of 8 Model No.:AN958-NA Page 8 of 8

Label： Model No.:AN958-NA FCC ID: 2A8RBAN958NA IC ID: 29662-AN958NA Label Location：

Page 1 of 2 1 Photographs - EUT Constructional Details Model No.: AN958-NA FCC ID: 2A8RBAN958NA IC ID: 29662-AN958NA Page 2 of 2

` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWA2204000009RG03 Rev.: 02 Page: 1 of 8 Authorized Signature: Panta Sun Wireless Laboratory Manager TEST REPORT Application No: SEWA2204000009RG Applicant: Fibocom Auto Inc. Address of Applicant: 13th Floor, Building A, Building 6, International Innovation Valley,Xili Street, Shenzhen Manufacturer: Fibocom Auto Inc. Address of Manufacturer: 13th Floor, Building A, Building 6, International Innovation Valley,Xili Street, Shenzhen EUT Description: 5G Module Model No.: AN958-NA Trade Mark: Fibocom FCC ID: 2A8RBAN958NA Standards: 47 CFR Part 2.1091 FCC KDB 447498 D01 v06 Date of Receipt: 2022/08/30 Date of Issue: 2023/03/31 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWA2204000009RG03 Rev.: 02 Page: 2 of 8 1 Version Revision Record Version Chapter Date Modifier Remark 01 2023/01/03 Original 02 2023/03/31 Revised the Gain according to Pd of GSM850&GSM1900 This report supersedes our previous report SEWA2204000009RG03, issued on 2023/01/03, which is hereby deemed null and void. Prepared By (Nick Hu) / Test Engineer Checked By (Well Wei) / Reviewer ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWA2204000009RG03 Rev.: 02 Page: 3 of 8 Contents 1 Version ......................................................................................................................... 2 2 General Information ...................................................................................................... 4 2.1 Client Information .................................................................................................. 4 2.2 Test Facility ........................................................................................................... 4 2.3 General Description of EUT ................................................................................... 5 3 RF Exposure Evaluation ............................................................................................... 6 3.1 RF Exposure Compliance Requirement ................................................................ 6 3.1.1 Limits ................................................................................................................. 6 3.1.2 Test Procedure .................................................................................................. 7 3.1.3 EUT RF Exposure Evaluation ............................................................................ 7 ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWA2204000009RG03 Rev.: 02 Page: 4 of 8 2 General Information 2.1 Client Information Applicant: Fibocom Auto Inc. Address of Applicant: 13th Floor, Building A, Building 6, International Innovation Valley,Xili Street, Shenzhen Manufacturer: Fibocom Auto Inc. Address of Manufacturer: 13th Floor, Building A, Building 6, International Innovation Valley,Xili Street, Shenzhen 2.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 6336.01) SGS-CSTC STANDARDS TECHNICAL SERVICES (SUZHOU) CO., LTD. is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 6336.01. • Innovation, Science and Economic Development Canada SGS-CSTC STANDARDS TECHNICAL SERVICES (SUZHOU) CO., LTD. has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0120. IC#: 27594. • FCC –Designation Number: CN1312 SGS-CSTC STANDARDS TECHNICAL SERVICES (SUZHOU) CO., LTD. has been recognized as an accredited testing laboratory. Designation Number: CN1312. Test Firm Registration Number: 717327 ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWA2204000009RG03 Rev.: 02 Page: 5 of 8 2.3 General Description of EUT EUT Description: 5G Module Model No.: AN958-NA Trade Mark: Fibocom Hardware Version: AN958-MAQC-NA-00 Software Version: AN958-GA-NA_R2.1_V.B.1.20 Antenna Type: Fixed External Antenna Antenna Gain: GSM850: 2.20dBi GSM1900: 1.00dBi WCDMA Band II: 2.31dBi WCDMA Band IV: 2.33dBi WCDMA Band V: 2.20dBi LTE Band 2: 2.31dBi LTE Band 4: 2.33dBi LTE Band 5: 2.20dBi LTE Band 7: 2.98dBi LTE Band 12: 2.20dBi LTE Band 14: 2.20dBi LTE Band 17: 2.20dBi LTE Band 25: 2.31dBi LTE Band 26: 2.20dBi LTE Band 41: 2.98dBi LTE Band 42: 4.30dBi LTE Band 66: 2.33dBi LTE Band 71: 2.20dBi NR Band n2: 2.31dBi NR Band n5: 2.20dBi NR Band n7: 2.98dBi NR Band n12: 2.20dBi NR Band n14: 2.20dBi NR Band n25: 2.31dBi NR Band n41: 2.98dBi NR Band n48: -3.00dBi NR Band n66: 2.33dBi NR Band n71: 2.20dBi NR Band n77: 1.00dBi NR Band n78: 1.00dBi ENDC: DC_5A_n2A; DC_12A_n2A; DC_66A_n2A; DC_71A_n2A; DC_2A_n5A; DC_7A_n5A; DC_66A_n5A; DC_5A_n7A; DC_12A_n7A; DC_66A_n7A; DC_2A_n41A; DC_25A_n41A; DC_26A_n41A; DC_66A_n41A; DC_2A_n48A; DC_66A_n48A; DC_2A_n66A; DC_5A_n66A; DC_12A_n66A; DC_2A_n71A; DC_7A_n71A; DC_66A_n71A; DC_2A_n78A; DC_5A_n78A; DC_7A_n78A; DC_12A_n78A; DC_66A_n78A Note: The antenna gain are derived from the gain information report provided by the manufacturer. Remark: As above information is provided and confirmed by the applicant. SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWA2204000009RG03 Rev.: 02 Page: 6 of 8 3 RF Exposure Evaluation 3.1 RF Exposure Compliance Requirement 3.1.1 Limits Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm2) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3-3.0 614 1.63 *(100) 6 3.0-30 1842/f 4.89/f *(900/f2) 6 30-300 61.4 0.163 1.0 6 300-1500 / / f/300 6 1500-100,000 / / 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f2) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 44 Effective (Isotropic) Radiated Power Output Data for SA Test Result Band SCS Bandwidth Modulation Channel RB C onfig P ower EIRP LIMIT Verdict （dBm） N48 30 20 DFT-PI2BPSK L Inner_1RB_Left 22.98 20.89 23 PASS N48 30 20 DFT-PI2BPSK L Inner_1RB_Right 23.07 20.98 23 PASS N48 30 20 DFT-PI2BPSK L Outer_Full 22.68 20.59 23 PASS N48 30 20 DFT-QPSK L Inner_1RB_Left 23.25 21.16 23 PASS N48 30 20 DFT-QPSK L Inner_1RB_Right 23.09 21 23 PASS N48 30 20 DFT-QPSK L Outer_Full 22.19 20.1 23 PASS N48 30 20 DFT-16QAM L Inner_1RB_Left 22.21 20.12 23 PASS N48 30 20 DFT-16QAM L Inner_1RB_Right 22.21 20.12 23 PASS N48 30 20 DFT-16QAM L Outer_Full 21.14 19.05 23 PASS N48 30 20 DFT-64QAM L Inner_1RB_Left 20.14 18.05 23 PASS N48 30 20 DFT-64QAM L Inner_1RB_Right 19.99 17.9 23 PASS N48 30 20 DFT-64QAM L Outer_Full 20.68 18.59 23 PASS N48 30 20 DFT-256QAM L Inner_1RB_Left 18.45 16.36 23 PASS N48 30 20 DFT-256QAM L Inner_1RB_Right 18.45 16.36 23 PASS N48 30 20 DFT-256QAM L Outer_Full 18.6 16.51 23 PASS N48 30 20 DFT-PI2BPSK M Inner_1RB_Left 22.98 20.89 23 PASS N48 30 20 DFT-PI2BPSK M Inner_1RB_Right 22.75 20.66 23 PASS N48 30 20 DFT-PI2BPSK M Outer_Full 22.36 20.27 23 PASS Compliance Certification Services (Kunshan) Inc. Page: 2 of 44 N48 30 20 DFT-QPSK M Inner_1RB_Left 23.01 20.92 23 PASS N48 30 20 DFT-QPSK M Inner_1RB_Right 22.77 20.68 23 PASS N48 30 20 DFT-QPSK M Outer_Full 21.9 19.81 23 PASS N48 30 20 DFT-16QAM M Inner_1RB_Left 22.07 19.98 23 PASS N48 30 20 DFT-16QAM M Inner_1RB_Right 21.85 19.76 23 PASS N48 30 20 DFT-16QAM M Outer_Full 20.88 18.79 23 PASS N48 30 20 DFT-64QAM M Inner_1RB_Left 20.06 17.97 23 PASS N48 30 20 DFT-64QAM M Inner_1RB_Right 19.82 17.73 23 PASS N48 30 20 DFT-64QAM M Outer_Full 20.38 18.29 23 PASS N48 30 20 DFT-256QAM M Inner_1RB_Left 18.41 16.32 23 PASS N48 30 20 DFT-256QAM M Inner_1RB_Right 18.19 16.1 23 PASS N48 30 20 DFT-256QAM M Outer_Full 18.37 16.28 23 PASS N48 30 20 DFT-PI2BPSK H Inner_1RB_Left 22.79 20.7 23 PASS N48 30 20 DFT-PI2BPSK H Inner_1RB_Right 22.77 20.68 23 PASS N48 30 20 DFT-PI2BPSK H Outer_Full 22.36 20.27 23 PASS N48 30 20 DFT-QPSK H Inner_1RB_Left 22.84 20.75 23 PASS N48 30 20 DFT-QPSK H Inner_1RB_Right 22.83 20.74 23 PASS N48 30 20 DFT-QPSK H Outer_Full 21.84 19.75 23 PASS N48 30 20 DFT-16QAM H Inner_1RB_Left 21.86 19.77 23 PASS N48 30 20 DFT-16QAM H Inner_1RB_Right 21.77 19.68 23 PASS N48 30 20 DFT-16QAM H Outer_Full 20.82 18.73 23 PASS N48 30 20 DFT-64QAM H Inner_1RB_Left 19.73 17.64 23 PASS Compliance Certification Services (Kunshan) Inc. Page: 3 of 44 N48 30 20 DFT-64QAM H Inner_1RB_Right 19.62 17.53 23 PASS N48 30 20 DFT-64QAM H Outer_Full 20.34 18.25 23 PASS N48 30 20 DFT-256QAM H Inner_1RB_Left 18.13 16.04 23 PASS N48 30 20 DFT-256QAM H Inner_1RB_Right 18.14 16.05 23 PASS N48 30 20 DFT-256QAM H Outer_Full 18.28 16.19 23 PASS N48 30 40 DFT-PI2BPSK L Inner_1RB_Left 23.28 21.19 23 PASS N48 30 40 DFT-PI2BPSK L Inner_1RB_Right 22.98 20.89 23 PASS N48 30 40 DFT-PI2BPSK L Outer_Full 22.66 20.57 23 PASS N48 30 40 DFT-QPSK L Inner_1RB_Left 23.39 21.3 23 PASS N48 30 40 DFT-QPSK L Inner_1RB_Right 22.99 20.9 23 PASS N48 30 40 DFT-QPSK L Outer_Full 22.14 20.05 23 PASS N48 30 40 DFT-16QAM L Inner_1RB_Left 22.46 20.37 23 PASS N48 30 40 DFT-16QAM L Inner_1RB_Right 22 19.91 23 PASS N48 30 40 DFT-16QAM L Outer_Full 21.1 19.01 23 PASS N48 30 40 DFT-64QAM L Inner_1RB_Left 20.38 18.29 23 PASS N48 30 40 DFT-64QAM L Inner_1RB_Right 19.88 17.79 23 PASS N48 30 40 DFT-64QAM L Outer_Full 20.7 18.61 23 PASS N48 30 40 DFT-256QAM L Inner_1RB_Left 18.71 16.62 23 PASS N48 30 40 DFT-256QAM L Inner_1RB_Right 18.33 16.24 23 PASS N48 30 40 DFT-256QAM L Outer_Full 18.62 16.53 23 PASS N48 30 40 DFT-PI2BPSK M Inner_1RB_Left 23.33 21.24 23 PASS Compliance Certification Services (Kunshan) Inc. Page: 4 of 44 N48 30 40 DFT-PI2BPSK M Inner_1RB_Right 23.02 20.93 23 PASS N48 30 40 DFT-PI2BPSK M Outer_Full 22.48 20.39 23 PASS N48 30 40 DFT-QPSK M Inner_1RB_Left 23.22 21.13 23 PASS N48 30 40 DFT-QPSK M Inner_1RB_Right 22.99 20.9 23 PASS N48 30 40 DFT-QPSK M Outer_Full 21.94 19.85 23 PASS N48 30 40 DFT-16QAM M Inner_1RB_Left 22.24 20.15 23 PASS N48 30 40 DFT-16QAM M Inner_1RB_Right 22.17 20.08 23 PASS N48 30 40 DFT-16QAM M Outer_Full 20.96 18.87 23 PASS N48 30 40 DFT-64QAM M Inner_1RB_Left 20.32 18.23 23 PASS N48 30 40 DFT-64QAM M Inner_1RB_Right 19.89 17.8 23 PASS N48 30 40 DFT-64QAM M Outer_Full 20.52 18.43 23 PASS N48 30 40 DFT-256QAM M Inner_1RB_Left 18.59 16.5 23 PASS N48 30 40 DFT-256QAM M Inner_1RB_Right 18.4 16.31 23 PASS N48 30 40 DFT-256QAM M Outer_Full 18.49 16.4 23 PASS N48 30 40 DFT-PI2BPSK H Inner_1RB_Left 23.1 21.01 23 PASS N48 30 40 DFT-PI2BPSK H Inner_1RB_Right 22.89 20.8 23 PASS N48 30 40 DFT-PI2BPSK H Outer_Full 22.44 20.35 23 PASS N48 30 40 DFT-QPSK H Inner_1RB_Left 23.13 21.04 23 PASS N48 30 40 DFT-QPSK H Inner_1RB_Right 22.91 20.82 23 PASS N48 30 40 DFT-QPSK H Outer_Full 21.89 19.8 23 PASS N48 30 40 DFT-16QAM H Inner_1RB_Left 22.18 20.09 23 PASS N48 30 40 DFT-16QAM H Inner_1RB_Right 22 19.91 23 PASS Compliance Certification Services (Kunshan) Inc. Page: 5 of 44 N48 30 40 DFT-16QAM H Outer_Full 20.9 18.81 23 PASS N48 30 40 DFT-64QAM H Inner_1RB_Left 20.08 17.99 23 PASS N48 30 40 DFT-64QAM H Inner_1RB_Right 19.95 17.86 23 PASS N48 30 40 DFT-64QAM H Outer_Full 20.46 18.37 23 PASS N48 30 40 DFT-256QAM H Inner_1RB_Left 18.5 16.41 23 PASS N48 30 40 DFT-256QAM H Inner_1RB_Right 18.23 16.14 23 PASS N48 30 40 DFT-256QAM H Outer_Full 18.41 16.32 23 PASS Compliance Certification Services (Kunshan) Inc. Page: 6 of 44 Peak-to-Average Ratio for SA Peak-to-Average Ratio(PAPR) Test Result Band SCS Bandwidt h Modulation Cha nnel RB Config DutyCy cle Facto r Resul t Limit Verdict N48 30 40 DFT-256QAM L Outer_Full 100% 0.00 9.34 ≤13 PASS N48 30 40 CP-256QAM L Outer_Full 100% 0.00 9.87 ≤13 PASS N48 30 40 DFT-256QAM M Outer_Full 100% 0.00 9.29 ≤13 PASS N48 30 40 CP-256QAM M Outer_Full 100% 0.00 10.2 7 ≤13 PASS N48 30 40 DFT-256QAM H Outer_Full …

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Page: 25 of 44 Band Edge for SA Test Graphs 1-N48-PC3-30-20-L-1-DFT-PI2BPSK-Edge_1 RB_Left-1@0-Ant1-1--PASS-see graph 1-N48-PC3-30-20-L-3-DFT-PI2BPSK-Outer_ Full-50@0-Ant1-1--PASS-see graph 1-N48-PC3-30-20-L-4-CP-QPSK-Edge_1RB _Left-1@0-Ant1-1--PASS-see graph 1-N48-PC3-30-20-L-6-CP-QPSK-Outer_Full- 51@0-Ant1-1--PASS-see graph Compliance Certification Services (Kunshan) Inc. Page: 26 of 44 1-N48-PC3-30-20-H-2-DFT-PI2BPSK-Edge_ 1RB_Right-1@50-Ant1-1--PASS-see graph 1-N48-PC3-30-20-H-3-DFT-PI2BPSK-Outer_ Full-50@0-Ant1-1--PASS-see graph 1-N48-PC3-30-20-H-5-CP-QPSK-Edge_1RB _Right-1@50-Ant1-1--PASS-see graph 1-N48-PC3-30-20-H-6-CP-QPSK-Outer_Full- 51@0-Ant1-1--PASS-see graph Compliance Certification Services (Kunshan) Inc. Page: 27 of 44 1-N48-PC3-30-40-L-1-DFT-PI2BPSK-Edge_1 RB_Left-1@0-Ant1-1--PASS-see graph 1-N48-PC3-30-40-L-3-DFT-PI2BPSK-Outer_ Full-100@0-Ant1-1--PASS-see graph 1-N48-PC3-30-40-L-4-CP-QPSK-Edge_1RB _Left-1@0-Ant1-1--PASS-see graph 1-N48-PC3-30-40-L-6-CP-QPSK-Outer_Full- 106@0-Ant1-1--PASS-see graph Compliance Certification Services (Kunshan) Inc. Page: 28 of 44 1-N48-PC3-30-40-H-2-DFT-PI2BPSK-Edge_ 1RB_Right-1@105-Ant1-1--PASS-see graph 1-N48-PC3-30-40-H-3-DFT-PI2BPSK-Outer_ Full-100@0-Ant1-1--PASS-see graph 1-N48-PC3-30-40-H-5-CP-QPSK-Edge_1RB _Right-1@105-Ant1-1--PASS-see graph 1-N48-PC3-30-40-H-6-CP-QPSK-Outer_Full- 106@0-Ant1-1--PASS-see graph Compliance Certification Services (Kunshan) Inc. Page: 29 of 44 Conducted Spurious Emission for SA Test Graphs 1-N48-PC2-30-40-L-1-DFT-QPSK-Inner_1RB [email protected] PASS 1-N48-PC2-30-40-L-1-DFT-QPSK-Inner_1RB [email protected] SS 1-N48-PC2-30-40-L-1-DFT-QPSK-Inner_1RB [email protected] ASS 1-N48-PC2-30-40-L-1-DFT-QPSK-Inner_1RB [email protected] 40-PASS Compliance Certification Services (Kunshan) Inc. Page: 30 of 44 1-N48-PC2-30-40-L-1-DFT-QPSK-Inner_1RB [email protected] -40-PASS 1-N48-PC2-30-40-L-1-DFT-QPSK-Inner_1RB _Left-1@1-12000-20000-Ant1-17418.…

Text truncated - open the document above for the full version.