2A8RP-MD0401Pump Base

MEDTRUM TECHNOLOGIES Inc.

Click to zoom

Application Details

Equipment Class: DTS - Digital Transmission System
Date of Grant: Sep 27, 2022
Application Purpose: Original Equipment
Date of Application: Sep 27, 2022
Equipment Note: Pump Base
Frequency Range: 2402.00000000 - 2480.00000000
Company: MEDTRUM TECHNOLOGIES Inc.
Country: China

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

w w w . m e d t r u m . c o m TouchCare ® Insulin Pump System Quick Start Guide (mg/dL) Medtrum Simplifying Diabetes w w w . m e d t r u m . c o m Contents Insulin Pump System Overview 1 PDM Settings 2 Basal Settings 4 Bolus Settings 5 Start a new Patch 6 Read Pump 9 Temp Basal 10 Manual Bolus 11 Food Bolus Calculator 12 Suspend & Resume 13 Deactivate the Patch 14 Alerts & Emergency Kit 15 Your Personal Settings 16 Medtrum Simplifying Diabetes w w w . m e d t r u m . c o m 1. Power button 2. Home Key (Software Key) 3. Charging Port 4. Sound Hole 5. Indicator light The Personal Diabetes Manager (PDM) •Your ultra-thin Patch Pump is composed of a reusable Pump Base (MD0401) and a disposable Reservoir Patch (MD0400) which stores up to 400 U of insulin and lasts for up to 3 days. •The Pump Base stores delivery settings and sends data to the PDM via Bluetooth Low Energy(communication range 4 meters without blocking). •The Patch Pump (Base and Patch connected) is waterproof at 8 feet (2.5 meters) for 60 minutes (IP28). •Store the Pump Base and Reservoir Patch at temperatures between 14°F (-10°C ) and 131°F (55°C). Pump BaseReservoir Patch Fully charged Charging Not charging Battery low Battery empty Charge PDM The PDM requires an AC adapter with an output of DC 5.0V 5 4 3 2 1 Insulin Pump System Overview 1 Medtrum Simplifying Diabetes w w w . m e d t r u m . c o m 1. Turn on/off the PDM •Turn-on - Long-press the power button, a green light will flash. •Turn-off - Long-press the power button for about 2 seconds, then slide to power off. Or long-press the power button for about 8 seconds. 4. Set time and date 2. Wake the PDM When the screen goes black, press the power button and then slide to unlock 5. Bolus Calculator Refer to Page 5 Note: You can only change the date and time when there is no activated Reservoir Patch. 3. Select language and country PDM Settings 2 Medtrum Simplifying Diabetes w w w . m e d t r u m . c o m 8. Find Pump Base SN You can find the Pump Base SN on the product box or on the back of the Pump Base. 7. Set display settings Main Menu  Settings  General  Display It is recommended for new users to set backlight time as 2 minutes 6. Set audio options Main Menu  Settings  General  Audio Options If you set the audio option to Audio off /Vibrate off, your PDM only vibrates when a serious Alarm occurs. 9. Enter Pump Base SN Main Menu  Patch  Pump Base SN Tap ------ to enter SN manually PDM Settings 3 Medtrum Simplifying Diabetes w w w . m e d t r u m . c o m Main Menu  Settings  Insulin Pump  Basal Setup 1. Max Basal Tap the Max Basal rate to edit it 2. Edit Basal Pattern 1. Tap Edit Basal, then select the Pattern to edit it 2. Set basal rate •Tap blue U/H field to set the Basal rate. •You can set a basal rate between 0 and the Max Basal Rate with an increment of 0.05 U/H. 3. Add Time Segment •Tap +Add Time Segment to add a new segment. •You can set up to 48 segments for each day. 4. Delete Time Segment •Slide to left on each segment, tap Delete. The start time of next segment will be adjusted •Slide on segment back to right to cancel deleting 5. Scroll up and down to review all segments 6. Tap to save the settings 3. Select a Basal Pattern Main Menu  Basal  Select Pattern 24 Hour Total Note: Recheck all the numbers you entered to make sure that they are the intended values. Basal Settings 4 Medtrum Simplifying Diabetes w w w . m e d t r u m . c o m 1. Max Bolus Tap the Max Bolus to edit it 2. Set up the Bolus Calculator •Turn on/off the Bolus Calculator •Set IC ratios •Set Insulin Sensitivity •Set BG target •Set IOB Time (Active Insulin Time) 3. Normal, Extended and Combo Bolus Main Menu  Settings Insulin Pump  Bolus Setup Bolus Settings 5 Medtrum Simplifying Diabetes w w w . m e d t r u m . c o m Select the infusion site •Clean, less hair, no sweat, uncovered, enough fat (at least 0.2 in thick), away from navel. •A new infusion site should be at least 1 inch (2.5 cm) away from the last site. •If you choose an infusion site on your abdomen, back or buttocks, apply the Patch horizontally. •If you choose an infusion site on your upper arm or thigh, apply the Patch vertically. Prepare the infusion site •Wash your hands with soap and water. •Clean the infusion site with an alcohol wipe to enhance adhesion. •Let the skin air dry completely. 1 2 Connect Pump Base and Reservoir Patch Main Menu  Patch  New Patch 3 Gently insert the pump base and push down all the way until the pump base is locked in place to the reservoir patch. The pump beeps four times Note: Please pay attention to the location of the Sensor site and Patch site so that there is little communication interruption. Start a new Patch 6 Medtrum Simplifying Diabetes w w w . m e d t r u m . c o m 3. Keep the syringe vertical to the Patch Pump, and the needle inside the fill port. Retract the plunger to remove air bubbles. 4 Fill the New Reservoir Patch With the help of your healthcare provider, decide on the amount of insulin (70 U - 400 U) you need to insert into the Reservoir Patch. 5. Slowly fill the Reservoir with insulin 2. Fill the syringe with insulin. 1. Push air into the vial. Remove air 4. Push the plunger until you see a drop of insulin at the tip of the needle Prime the Pump 5 Warning: Do not inject air into the fill port. Doing so may result in unintended or interrupted insulin delivery. Start a new Patch 7 Press needle button Do not start priming before the needle button is pressed. Medtrum Simplifying Diabetes w w w . m e d t r u m . c o m Place the Patch 6 Start Insulin Delivery 7 Priming takes about 3 minutes. Start a new Patch 8 2. Peel off the adhesive liners 3. Press the Pump against the skin 4. Run your finger around the entire edge of the adhesive pad 1. Remove the safety lock 5. Press the needle button with one quick motion to completely insert the needle Medtrum Simplifying Diabetes w w w . m e d t r u m . c o m Home ScreenDelivery Status 8 1. Insulin Delivery Status 2. IOB 3. Deliv…

Text truncated - open the document above for the full version.

Cover Letter(s)

SCS-F019: Confidentiality Request Letter Page 1 of 4 Rev 7.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Website: https://www.cps.bureauveritas.com/ Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 SCS-F019: Confidentiality Request Letter Page 2 of 4 Rev 7.0 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (obsolete) 4.0 5.0 Nov-19-2015 Updated company logo (current) 5.0 6.0 Jun-26-2019 Updated References and Contact Info 6.0 7.0 Aug-30-2020 SCS-F019: Confidentiality Request Letter Page 3 of 4 Rev 7.0 Medtrum Technologies Inc. 2022//9/1 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046-1609 Cc: Bureau Veritas Consumer Products Services Inc. 775 Montague Expressway Milpitas, CA 95035 Subject: Confidentiality Request for FCC ID: 2A8RP-MD0401 Pursuant to CFR 47 sections 0.457 and 0.459, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application be held confidential: Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagram Short Term External Photos Short Term Permanent i Internal Photos Short Term Permanent Operational Description/ Theory of Operation Short Term Permanent Parts List Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent i User’s Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. SCS-F019: Confidentiality Request Letter Page 4 of 4 Rev 7.0 Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: To avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days; or for a specified date of not to exceed 180 days from the Grant Date The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature: Client’s name & title: Linli Luo Representative Contact information / address: 7F,Building 8, No.200 Niudun Road, Shanghai, China Permanent confidentiality may be requested in accordance with FCC KDB 726920

External Photos

Internal Photos

RF Exposure Info

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 6 Report Version 1 Test Report No.: FM2208WDG0047 RF EXPOSURE REPORT Applicant Medtrum Technologies Inc. Address 7F,Building 8, No.200 Niudun Road, Shanghai 201203, China Manufacturer or Supplier Medtrum Technologies Inc. Address Building 3 and Building 8, No.200 Niudun Road, Shanghai 201203, China Product Pump Base Brand Name N/A Model MD0401 Additional Model & Model Difference N/A Date of tests Aug. 09, 2022 ~ Sep. 07, 2022 FCC Part 2 (Section 2.1093) KDB 447498 D01 IEEE C95.1 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Lucas Chen Project Engineer / EMC Department Approved by Glyn He Assistant Manager / EMC Department Date: Sep. 13, 2022 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 6 Report Version 1 Test Report No.: FM2208WDG0047 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................ 3 1. CERTIFICATION .............................................................................................. 4 2. RF EXPOSURE DEFINE ................................................................................. 5 3. CLASSIFICATION ........................................................................................... 5 4. SAR TEST EXCLUSION THRESHOLDS ........................................................ 6 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 6 Report Version 1 Test Report No.: FM2208WDG0047 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED FM2208WDG0047 Original release Sep. 13, 2022 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 6 Report Version 1 Test Report No.: FM2208WDG0047 1. CERTIFICATION FCC ID: 2A8RP-MD0401 PRODUCT: Pump Base BRAND NAME: N/A MODEL NO.: MD0401 ADDITIONAL NO.: N/A APPLICANT: Medtrum Technologies Inc. STANDARDS: FCC Part 2 (Section 2.1093) KDB 447498 D01 IEEE C95.1 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 5 of 6 Report Version 1 Test Report No.: FM2208WDG0047 2. RF EXPOSURE DEFINE The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where   f(GHz) is the RF channel transmit frequency in GHz   Power and distance are rounded to the nearest mW and mm before calculation   The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considere…

Text truncated - open the document above for the full version.

Test Report

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 36 Report Version 1 Test Report No.: RF2208WDG0047 TEST REPORT Applicant Medtrum Technologies Inc. Address 7F,Building 8, No.200 Niudun Road, Shanghai 201203, China Manufacturer or Supplier Medtrum Technologies Inc. Address Building 3 and Building 8, No.200 Niudun Road, Shanghai 201203, China Product Pump Base Brand Name N/A Model MD0401 Additional Model & Model Difference N/A Date of tests Aug. 09, 2022 ~ Sep. 07, 2022 the tests have been carried out according to the requirements of the following standard: FCC Part 15, Subpart C, Section 15.247 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Lucas Chen Project Engineer / EMC Department Approved by Glyn He Assistant Manager / EMC Department Date: Sep. 13, 2022 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 36 Report Version 1 Test Report No.: RF2208WDG0047 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 4 1 SUMMARY OF TEST RESULTS .................................................................................................... 5 2 MEASUREMENT UNCERTAINTY ................................................................................................. 5 3 GENERAL INFORMATION ............................................................................................................ 6 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................. 6 3.2 DESCRIPTION OF TEST MODES ............................................................................................... 7 3.2.1. CONFIGURATION OF SYSTEM UNDER TEST ............................................................... 7 3.2.2. TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .................................... 7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................................................. 9 3.4 DESCRIPTION OF SUPPORT UNITS ......................................................................................... 9 4 TEST TYPES AND RESULTS ...................................................................................................... 10 4.1 RADIATED EMISSION MEASUREMENT .................................................................................. 10 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT .................................................... 10 4.1.2 TEST INSTRUMENTS ...................................................................................................... 11 4.1.3 TEST PROCEDURES ..................................................................................................... 12 4.1.4 DEVIATION FROM TEST STANDARD ........................................................................... 13 4.1.5 TEST SETUP ................................................................................................................... 13 4.1.6 EUT OPERATING CONDITIONS .................................................................................... 14 4.1.7 TEST RESULTS .............................................................................................................. 15 4.2 6dB BANDWIDTH MEASUREMENT .......................................................................................... 20 4.2.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ............................................................ 20 4.2.2 TEST INSTRUMENTS ..................................................................................................... 20 4.2.3 TEST PROCEDURE ........................................................................................................ 21 4.2.4 DEVIATION FROM TEST STANDARD ........................................................................... 21 4.2.5 TEST SETUP .........................................................................…

Text truncated - open the document above for the full version.

Test Report

Approval sheet Page 1 of 9 ASC_RFANT3216120A5T_V09 Aug. 2018 RFANT Series – RoHS Compliance MULTILAYER CERAMIC ANTENNA Halogens Free Product 2.4 GHz ISM Band RF Application P/N: RFANT3216120A5T *Contents in this sheet are subject to change without prior notice. Approval sheet Page 2 of 9 ASC_RFANT3216120A5T_V09 Aug. 2018 FEATURES 1. Surface Mounted Devices with a small dimension of 3.2 X 1.6 X1.2 mm 3 meet future miniaturization trend. 2. LTCC process 3. High stability in Temperature / Humidity Change APPLICATIONS 1. 2.4GHz ISM band RF applications 2. Bluetooth, Wireless, HomeRF CONSTRUCTION DIMENSIONS Figure Symbol Dimension (mm) L 3.20 ± 0.20 W 1.60 ± 0.10 T 1.20 ± 0.10 A 0.25 ± 0.15 PINConnection 1 Feeding 2 Identification Mark 3 Soldering terminal Approval sheet Page 3 of 9 ASC_RFANT3216120A5T_V09 Aug. 2018 ELECTRICAL CHARACTERISTICS RFANT3216120A5T Specification Working Frequency Range 2450 ± 50 MHz Fc (GHz) 2.9 Gain (dBi) 2 (Typical) VSWR 2 max. Series 1 6.8nH Matching component value Series 2 - Power Capacity 3 W max. Maximum Input Power 5 Watts for 5 minutes Operation Temperature -40 ̊C ~ +85 ̊C Polarization Linear Azimuth Beamwidth Omni-directional * This frequency must be adjusted to 2.45GHz with matching circuit. SOLDER LAND PATTERN DESIGN Figure Approval sheet Page 4 of 9 ASC_RFANT3216120A5T_V09 Aug. 2018 Antenna on Test Board ( Thickness 1.2mm) Antenna S11 on Test Board Antenna VSWR on Test Board Approval sheet Page 5 of 9 ASC_RFANT3216120A5T_V09 Aug. 2018 RADIATION PATTERN Radiation Pattern and Gain were dependent on measurement board design. The specification of RFANT3216120A5T antenna was measured based on the PCB size and installation position as shown in the below figure Test Board Vertical Horizontal Y - Z Plane Average Gain= 0.948 dBi X Cut -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 Peak Gain = 2.93dBi Average Gain = 0.60dBi X Cut -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 Peak Gain= -5.60dBi Average Gain=-10.19dBi X - Z Plane Average Gain= -2.147 dBi X Cut -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 127.0 Peak Gain= -4.98 dBi Average Gain= -9.68dBi X Cut -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 Peak Gain= 1.61 dBi Average Gain= -2.99 dBi X - Y Plane Average Gain= -2.810 dBi X Cut -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 Peak Gain= -3.79 dBi Average Gain= -8.89dBi X Cut -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 Peak Gain= 0.77 dBi Average Gain= -4.04 dBi x Y Z x Y x Y Z X Z X Z Y Z Y Approval sheet Page 6 of 9 ASC_RFANT3216120A5T_V09 Aug. 2018 RELIABILITY TEST Test item Test condition / Test method Specification Solderability JIS C 0050-4.6 JESD22-B102D *Solder bath temperature：235  5C *Immersion time：2  0.5 sec Solder：Sn3Ag0.5Cu for lead-free At least 95% of a surface of each terminal electrode must be covered by fresh solder. Leaching (Resistance to dissolution of metallization) IEC 60068-2-58 *Solder bath temperature：260  5C *Leaching immersion time：30  0.5 sec Solder : SN63A Loss of metallization on the edges of each electrode shall not exceed 25%. Resistance to soldering heat JIS C 0050-5.4 *Preheating temperature：120~150°C, 1 minute. *Solder temperature：2705C *Immersion time：101 sec Solder：Sn3Ag0.5Cu for lead-free Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Loss of metallization on the edges of each electrode shall not exceed 25%. Drop Test JIS C 0044 Customer’s specification. *Height：75 cm *Test Surface：Rigid surface of concrete or steel. *Times：6 surfaces for each units；2 times for each side. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Vibration JIS C 0040 *Frequency：10Hz~55Hz~10Hz(1min) *Total amplitude：1.5mm *Test times：6hrs.(Two hrs each in three mutually perpendicular directions) No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Adhesive Strength of Termination JIS C 0051- 7.4.3 *Pressurizing force： 5N(≦0603)；10N(>0603) *Test time：10±1 sec No remarkable damage or removal of the termination. Bending test JIS C 0051- 7.4.1 The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm/s per second until the deflection becomes 1mm/s and then pressure shall be maintained for 51 sec. Measurement to be made after keeping at room temperature for 242 hours No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Approval sheet Page 7 of 9 ASC_RFANT3216120A5T_V09 Aug. 2018 Temperature cycle JIS C 0025 1. 303 minutes at -40C3C, 2. 10~15 minutes at room temperature, 3. 303 minutes at +85C3C, 4. 10~15 minutes at room temperature, Total 100 continuous cycles Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. High temperature JIS C 0021 *Temperature：85C2C *Test duration：1000+24/-0 hours Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Humidity (steady conditions) JIS C 0022 *Humidity：90% to 95% R.H. *Temperature：402C *Time：1000+24/-0 hrs. Measurement to be made after keeping at room temperature for 242 hrs ※ 500hrs measuring the first data then 1000hrs data No mechanical damage. Electrical spe…

Text truncated - open the document above for the full version.

Test Setup Photos

Text truncated - open the document above for the full version.

Contact Information

Applicant

Linli / Luo

[email protected]86-21-50274781-3113Fax: +86-21-50274779

Test Firm

Bureau Veritas Shenzhen Co., Ltd. Dongguan BranchEdwin Ye

[email protected]86-20-8714 8549

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
1	15C	2.40 GHz - 2.48 GHz	582.00 µW

Confidentiality

Long Term

Grant Notes

Power listed is the maximum conducted output power.

Documents & Files

Select a file to view

Users Manual

↗

Cover Letter(s)

↗

External Photos

↗

ID Label/Location Info

↗

Internal Photos

↗

RF Exposure Info

↗

Test Report

↗

Test Setup Photos

↗

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

Text truncated - open the document above for the full version.

Cover Letter(s)

External Photos

Internal Photos

RF Exposure Info

Text truncated - open the document above for the full version.

Test Report

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 36 Report Version 1 Test Report No.: RF2208WDG0047 TEST REPORT Applicant Medtrum Technologies Inc. Address 7F,Building 8, No.200 Niudun Road, Shanghai 201203, China Manufacturer or Supplier Medtrum Technologies Inc. Address Building 3 and Building 8, No.200 Niudun Road, Shanghai 201203, China Product Pump Base Brand Name N/A Model MD0401 Additional Model & Model Difference N/A Date of tests Aug. 09, 2022 ~ Sep. 07, 2022 the tests have been carried out according to the requirements of the following standard: FCC Part 15, Subpart C, Section 15.247 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Lucas Chen Project Engineer / EMC Department Approved by Glyn He Assistant Manager / EMC Department Date: Sep. 13, 2022 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 36 Report Version 1 Test Report No.: RF2208WDG0047 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 4 1 SUMMARY OF TEST RESULTS .................................................................................................... 5 2 MEASUREMENT UNCERTAINTY ................................................................................................. 5 3 GENERAL INFORMATION ............................................................................................................ 6 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................. 6 3.2 DESCRIPTION OF TEST MODES ............................................................................................... 7 3.2.1. CONFIGURATION OF SYSTEM UNDER TEST ............................................................... 7 3.2.2. TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .................................... 7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................................................. 9 3.4 DESCRIPTION OF SUPPORT UNITS ......................................................................................... 9 4 TEST TYPES AND RESULTS ...................................................................................................... 10 4.1 RADIATED EMISSION MEASUREMENT .................................................................................. 10 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT .................................................... 10 4.1.2 TEST INSTRUMENTS ...................................................................................................... 11 4.1.3 TEST PROCEDURES ..................................................................................................... 12 4.1.4 DEVIATION FROM TEST STANDARD ........................................................................... 13 4.1.5 TEST SETUP ................................................................................................................... 13 4.1.6 EUT OPERATING CONDITIONS .................................................................................... 14 4.1.7 TEST RESULTS .............................................................................................................. 15 4.2 6dB BANDWIDTH MEASUREMENT .......................................................................................... 20 4.2.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ............................................................ 20 4.2.2 TEST INSTRUMENTS ..................................................................................................... 20 4.2.3 TEST PROCEDURE ........................................................................................................ 21 4.2.4 DEVIATION FROM TEST STANDARD ........................................................................... 21 4.2.5 TEST SETUP .........................................................................…

Text truncated - open the document above for the full version.

Test Report

Text truncated - open the document above for the full version.

Test Setup Photos

Text truncated - open the document above for the full version.

Rule Parts

Frequency Range

Power Output

15C

2.40 GHz - 2.48 GHz

582.00 µW