2A8S3-RV1RF remote control

Models: 30 / 40 / 50 / 50v / 64 / 64v / 80 Please read the instructions carefully before installation and keep for future reference. Please Note: This product is for a well-insulated dwelling. Table of Contents 1 Important Electrical safety 2 Technical Specifications / Appliance Dimensions 3 Components 4 Operating Instructions 5 Maintenance 6 Warranty 1 Important Electrical safety Read all instructions fully before using this electric fire. This electric fire is for INDOOR USE ONLY. If installing the appliance into an existing Chimney the chimney MUST be blocked off / capped. Do not locate the fire below or in front of a fixed socket outlet. Warning DO NOT COVER the fan heater air inlet / outlet as it could cause possible fire. Note the warning symbol on the fire. Do not use the fire near a bath / shower / swimming pool. Do not use the fire in areas where gasoline / paints / flammable liquids are stored, as they may catch fire. This appliance must be securely fixed / recessed to an internal wall in the property. Keep all furniture / curtains etc as least 1 meter away from the fire. The fire must be earthed. After the fire’s installation the plug must be accessible. Always disconnect the power supply before any cleaning / maintenance of the appliance. Ensure the appliance is cool before proceeding. If the power cord is damaged, it must be replaced by a qualified electrician or manufacturer service technician. Do not run the power cord under a carpet / rug etc. Always ensure it is routed securely and it is not a trip hazard. Ensure the power cord is kept away from hot surfaces and areas. Young children under 8 years old must always be supervised and must not play with the fire. The appliance is not a toy. Do not throw anything at the glass or strike the glass of the appliance. The appliance must not be used by young children or the infirm, ensure a fire guard is fitted to protect from burns as the fire can get very hot. The appliance must not be used through an external switching device such as a timer or connected to a circuit that is regularly on and off by a utility. Do not use the appliance to dry clothes. Do not use the appliance in small areas where there are persons are incapable of leaving the area on their own, unless there is constant supervision. This appliance is supplied with a 3 pin moulded plug that is for use of 120V AC 60 Hz. Do NOT operate the appliance if it is damaged. 2 Technical Specifications Heat Output per model Models 30 40 50 50V 64 64V 80 Maximum heat output 1500W 1500 W 1500W 1500W 1500W 1500W 1500W Minimum heat output 750W 750 W 750W 750W 750W 750W 750W Voltage supply 120 / 240V 50/60Hz Power usage for LED lighting / per model Models 30 40 50 50 V 64 64 V 80 Flame LED output 9.6 W 12 W 13W 13W 15W 15 W 18W Fuel Bed LED output 10 W 12 W 15W 8W 18W 9 W 20W Down lighting LED output 3 W 4 W 5W 5W 6.6W 6.6 W 8W Front LED pulsing lights output 1.5 W 1.5 W 1.5W 1.5W 2.0W 2.0 W 2.0W Appliance Dimensions Model A B C D E F G H Iconic 30 29 ½” 30 ¾” 23 3/8” 31 5/8” 7 3/8” 11 7/8” 9/16” 3 7/8” Iconic 40 39 3/8” 40 5/8” 15 13/16” 24 1/16” 7 3/8” 11 7/8” 9/16” 3 7/8” Iconic 50 49 ¼” 50 ½” 15 13/16” 24 1/16” 7 3/8” 11 7/8” 9/16” 3 7/8” Iconic 50v 49 ¼” 50 ½” 15 13/16” 24 1/16” 3 3/4” 8 ¼” 9/16” 3 7/8” Iconic 64 63 64 ¼” 15 13/16” 24 1/16” 7 3/8” 11 7/8” 9/16” 3 7/8” Iconic 64v 63 64 ¼” 15 13/16” 24 1/16” 3 3/4” 8 ¼” 9/16” 3 7/8” Iconic 80 78 ¾” 80 15 13/16” 24 1/16” 7 3/8” 11 7/8” 9/16” 3 7/8” Appliance Frame Dimensions Model A B C D Iconic 40 39 ¼” 15 5/8” 5/8” 1 3/16” Iconic 50 49 1/8” 15 5/8” 5/8” 1 3/16” Iconic 64 62 7/8” 15 5/8” 5/8” 1 3/16” Iconic 80 76 5/8” 15 5/8” 5/8” 1 3/16” 3 Components Before unpacking the fire inspect the carton for any damage, either caused by transport / water etc. If in doubt contact your local retailer, and do not use the appliance. IMPORTANT Keep any plastic packaging and small parts away from young children as they will pose a danger. Carton Contents: Fire Chassis (fully assembled) quantity 1 Instruction manual quantity 1 Remote Control and battery quantity 1 Wall mounting bracket quantity 1 Lower mounting brackets quantity 2 Log set (18 pieces per set for 2000 / 80”) quantity 1 Log set (12 pieces per set for 1600 / 64”) quantity 1 Log set (11 pieces per set for 1250 / 50”) quantity 1 Log set (9 pieces per set for 1000 / 40”) quantity 1 Log set (5 pieces per set for 750 / 30”) quantity 1 Base crystals (Boxed) quantity 1 Glass suction clamp quantity 1 4 Operating Instructions Pairing the remote to the appliance To pair the remote to the appliance, first turn on the main switch to put the fire in the standby mode. Press and hold the 2 buttons indicated for 5 seconds, then release and press the button on the remote to complete the pairing process. To ensure the pairing process has been successful simply press the button on the remote to turn the appliance on and off. If the appliance does not turn on / off repeat the process. Manual Operation Main Power Switch Push the main power switch to I, the main power indicator light will illuminate. Manual Switch Pressing the manual switch button turns the fire on and off. Heater Button Press the heater button once and the heater will turn on to half heat (750w). Press the heater button a second time and the heater increases to full heat (1500w). Press the heater button a third time and the heater will turn itself off. Flame Button Pressing the flame button will change the flame colour. There are four settings. Each time the button is pressed the flame colour and pattern will change colour. Down Light Button Pressing the down light button changes the colours. There are four different colour settings. There are four different modes in the down lighter setting, o Pulse mode o Colour change mode pulsing (ideally for a showroom setting) o Colour change mode o Solid state To activate each mode simply press the down light button and hold for 3 seconds, and this indicates the mode change. Fuel Bed Button Pres…

Text truncated - open the document above for the full version.

Modèles : 30 / 40 / 50 / 50 V / 64 / 64 V / 80 Veuillez lire attentivement les instructions avant l'installation et les conserver pour référence ultérieure. Veuillez noter : Ce produit est destiné à une habitation bien isolée. Table des matières 1 Important Sécurité électrique 2 Spécifications techniques / Dimensions de l'appareil 3 Composants 4 Instructions d'utilisation 5 Maintenance 6 Garantie 1 Important Sécurité électrique Lisez entièrement toutes les instructions avant d'utiliser ce feu électrique. Ce feu électrique est destiné à une UTILISATION INTÉRIEURE SEULEMENT. Si vous installez l'appareil dans une cheminée existante, la cheminée DOIT être obstruée / plafonnée. Ne placez pas le feu sous ou devant une prise de courant fixe. Avertissement NE PAS COUVRIR l'entrée/sortie d'air du chauffage par ventilateur car cela pourrait provoquer un incendie. Notez le symbole d'avertissement sur le feu. N'utilisez pas le feu à proximité d'une baignoire / douche / piscine. N'utilisez pas le feu dans des endroits où sont stockés de l'essence / des peintures / des liquides inflammables, car ils pourraient s'enflammer. Cet appareil doit être solidement fixé / encastré dans un mur intérieur de la propriété. Maintenez tous les meubles, rideaux, etc. à au moins 1 mètre du feu. Le feu doit être mis à la terre. Après l'installation du feu, la prise doit être accessible. Débranchez toujours l'alimentation électrique avant tout nettoyage / entretien de l'appareil. Assurez-vous que l'appareil est froid avant de procéder. Si le cordon d'alimentation est endommagé, il doit être remplacé par un électricien qualifié ou un technicien du fabricant. Ne pas faire passer le cordon d'alimentation sous un tapis ou une moquette, etc. Veillez toujours à ce qu'il soit acheminé de manière sûre et qu'il ne présente pas de risque de trébuchement. Veillez à ce que le cordon d'alimentation soit éloigné des surfaces et zones chaudes. Les jeunes enfants de moins de 8 ans doivent toujours être surveillés et ne doivent pas jouer avec le feu. L'appareil n'est pas un jouet. Ne jetez rien sur la vitre et ne frappez pas la vitre de l'appareil. L'appareil ne doit pas être utilisé par de jeunes enfants ou des personnes infirmes. Veillez à ce qu'un pare-feu soit installé pour vous protéger des brûlures car le feu peut devenir très chaud. L'appareil ne doit pas être utilisé par l'intermédiaire d'un dispositif de commutation externe, tel qu'une minuterie, ou connecté à un circuit qui est régulièrement mis en marche et arrêté par un service public. N'utilisez pas l'appareil pour sécher des vêtements. N'utilisez pas l'appareil dans de petites zones où se trouvent des personnes incapables de quitter la zone par leurs propres moyens, à moins qu'il n'y ait une surveillance constante. Cet appareil est fourni avec une fiche moulée à 3 broches destinée à une utilisation de 120V AC 60 Hz. N'utilisez PAS l'appareil s'il est endommagé. 2 Spécifications techniques Rendement thermique par modèle Modèles 30 40 50 50V 64 64V 80 Puissance thermique maximale 1500W 1500 W 1500W 1500W 1500W 1500W 1500W Puissance thermique minimale 750W 750 W 750W 750W 750W 750W 750W Tension d'alimentation 120 / 240V 50/60Hz Consommation électrique pour l'éclairage LED / par modèle Modèles 30 40 50 50 V 64 64 V 80 Sortie LED de la flamme 9.6 W 12 W 13W 13W 15W 15 W 18W Sortie LED du lit de carburant 10 W 12 W 15W 8W 18W 9 W 20W Sortie LED pour l'éclairage vers le bas 3 W 4 W 5W 5W 6.6W 6.6 W 8W Sortie des lumières pulsées de la LED avant 1.5 W 1.5 W 1.5W 1.5W 2.0W 2.0 W 2.0W Éclairage LED d'ambiance 9.6 W 9.6 W 9.6 W 9.6 W 9.6W 9.6 W 9.6W Dimensions de l'appareil Modèle A B C D E F G H Iconique 30 29 ½” 30 ¾” 23 3/8” 31 5/8” 7 3/8” 11 7/8” 9/16” 3 7/8” Iconique 40 39 3/8” 40 5/8” 15 13/16” 24 1/16” 7 3/8” 11 7/8” 9/16” 3 7/8” Iconique 50 49 ¼” 50 ½” 15 13/16” 24 1/16” 7 3/8” 11 7/8” 9/16” 3 7/8” Iconique 50V 49 ¼” 50 ½” 15 13/16” 24 1/16” 3 3/4” 8 ¼” 9/16” 3 7/8” Iconique 64 63 64 ¼” 15 13/16” 24 1/16” 7 3/8” 11 7/8” 9/16” 3 7/8” Iconique 64V 63 64 ¼” 15 13/16” 24 1/16” 3 3/4” 8 ¼” 9/16” 3 7/8” Iconique 80 78 ¾” 80 15 13/16” 24 1/16” 7 3/8” 11 7/8” 9/16” 3 7/8” Dimensions du cadre de l'appareil Modèle A B C D 40 39 ¼” 15 5/8” 5/8” 1 3/16” 50 49 1/8” 15 5/8” 5/8” 1 3/16” 64 62 7/8” 15 5/8” 5/8” 1 3/16” 80 76 5/8” 15 5/8” 5/8” 1 3/16” 3 Composants Avant de déballer le feu, vérifiez que le carton n'a pas été endommagé par le transport, l'eau, etc. En cas de doute, contactez votre revendeur local et n'utilisez pas l'appareil. IMPORTANT Conservez les emballages en plastique et les petites pièces hors de portée des jeunes enfants, car ils représentent un danger. Contenu du carton : Fire Chassis (entièrement assemblé) quantité 1 Manuel d'instruction quantité 1 Télécommande et batterie quantité 1 Support de montage mural quantité 1 Supports de montage inférieurs quantité 2 Jeu de bûches (18 pièces par jeu pour 2000 / 80") quantité 1 Jeu de bûches (12 pièces par jeu pour 1600 / 64") quantité 1 Jeu de bûches (11 pièces par jeu pour 1250 / 50") quantité 1 Jeu de bûches (9 pièces par jeu pour 1000 / 40") quantité 1 Jeu de bûches (5 pièces par jeu pour 750 / 30") quantité 1 Cristaux de base (en boîte) quantité 1 Pince d'aspiration pour verre quantité 1 4 Instructions d'utilisation Associer la télécommande à l'appareil Pour jumeler la télécommande à l'appareil, allumez d'abord l'interrupteur principal pour mettre le feu en mode veille. Appuyez sur les 2 boutons indiqués pendant 5 secondes, puis relâchez-les et appuyez sur le bouton de la télécommande pour terminer le processus de couplage. Pour s'assurer que le processus de couplage a réussi, il suffit d'appuyer sur le bouton de la télécommande pour allumer et éteindre l'appareil. Si l'appareil ne s'allume pas ou ne s'éteint pas, répétez le processus. Opération manuelle Interrupteur principal d'alimentation Poussez l'interrupteur d'alimentation principale sur I, le voyant d'alimentation principale s'allume. Interrupteur manuel En appuya…

Text truncated - open the document above for the full version.

Magnolia Home Furnishing Inc. 041521-14 Authority to Act as Agent Date: November 18, 2022 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: ______Intertek Testing Service Shanghai______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: November 17, 2023 By: Xiaoxuan Sun (Signature 1 ) (Print name) Title: Managing Director On behalf of: Magnolia Home Furnishing Inc. (Company Name) Telephone: +1 9053302918 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Magnolia Home Furnishing Inc. 041521-14 Request for Confidentiality Date: November 18, 2022 Subject: Confidentiality Request for: _____FCC ID: 2A8S3-RV1______ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒Permanent Block Diagrams ☐ Short Term External Photos ☐Short Term ☐Permanent * 1 Internal Photos ☐ Short Term ☒Permanent Operation Description/Theory of Operation ☐ Short Term ☐ Permanent Parts List & Placement/BOM ☐ Short Term ☐ Permanent Tune-Up Procedure ☐ Short Term ☒ Permanent Schematics ☐ Short Term Test Setup Photos ☐ Short Term ☐Permanent * 3 User’s Manual Magnolia Home Furnishing Inc. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __180__ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: Xiaoxuan Sun (Signature/Title 2 ) (Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Page 1 of 2 External Photos Page 2 of 2 External view

Page 1 of 3 Internal Photos Page 2 of 3 Internal view Page 3 of 3 Antenna

Magnolia Home Furnishing Inc. SAR COMPLIANCE REPORT Report Type: FCC SAR assessment report Model: RV1 REPORT NUMBER 220900422HZH-002 ISSUE DATE November 18, 2022 DOCUMENT CONTROL NUMBER: TTRFFCCSAR-01_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRFFCCSAR-01_V1© 2018 Intertek Page 2 of 8 Report no.: 220900422HZH-002 Applicant: Magnolia Home Furnishing Inc. 78 Howard Ave., Oakville, Ontario, Canada Manufacturer: Magnolia Home Furnishing Inc. 78 Howard Ave., Oakville, Ontario, Canada Factory: Shen Zhen Feawell Technology Company Limited 3/F, 8#, Lanshuxia park, Liangantian, Pinghu Longgang District ShenZhen China FCC ID: 2A8S3-RV1 SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: KDB447498 D01 General RF Exposure Guidance v06 FCC Part2.1091, FCC Part2.1093 FCC Part1.1307(b) PREPARED BY: REVIEWED BY: Offa Zhou Wakeyou Wang Project Engineer Reviewer Report No.: 220900422HZH-002 TEST REPORT TTRFFCCSAR-01_V1© 2018 Intertek Page 3 of 8 Revision History Report No. Version Description Issued Date 220900422HZH-002 Rev. 01 Initial issue of report November 18, 2022 Report No.: 220900422HZH-002 TEST REPORT TTRFFCCSAR-01_V1© 2018 Intertek Page 4 of 8 1 GENERAL INFORMATION 1.1 Description of Equipment Under Test (EUT) Product name: RF remote control Type/Model: RV1 Description of EUT: The EUT covered in the report is RF remote controller with 433MHz as carrier. Rating: DC 4.5V EUT type: Table top Floor standing Software Version: / Hardware Version: / Sample Identification No.: 0221015-15-001 Sample received date: October 15, 2022 Date of test: November 7, 2022 ~ November 16, 2022 1.2 Technical Specification Operation Frequency: 433.915MHz Type of Modulation: ASK Product Type: Mobile Portable Fix Location Channel Number: 1 Antenna Designation: Integral PCB antenna, non-user removable Gain of Antenna: 3dBi max (Declared by manufacture) Report No.: 220900422HZH-002 TEST REPORT TTRFFCCSAR-01_V1© 2018 Intertek Page 5 of 8 1.3 Description of Test Facility Name: Intertek Testing Services Shanghai Address: Building 86, No. 1198 Qinzhou Road (North), Shanghai 200233, P.R. China Telephone: 86 21 61278200 Telefax: 86 21 54262353 The test facility is recognized, certified, or accredited by these organizations: CNAS Accreditation Lab Registration No. CNAS L0139 FCC Accredited Lab Designation Number: CN0175 IC Registration Lab CAB identifier.: CN0014 VCCI Registration Lab Registration No.: R-4243, G-845, C-4723, T-2252 A2LA Accreditation Lab Certificate Number: 3309.02 Report No.: 220900422HZH-002 TEST REPORT TTRFFCCSAR-01_V1© 2018 Intertek Page 6 of 8 2 SAR Assessment Test result: Pass 2.1 SAR Test Exclusion Limit 100 MHz – 6 GHz and ≤ 50 mm Report No.: 220900422HZH-002 TEST REPORT TTRFFCCSAR-01_V1© 2018 Intertek Page 7 of 8 100 MHz – 6 GHz and > 50 mm < 100 MHz and < 200 mm Report No.: 220900422HZH-002 TEST REPORT TTRFFCCSAR-01_V1© 2018 Intertek Page 8 of 8 2.2 Assessment Results The highest EIRP adjusted with tune-up tolerance is: 77.20 - 95.30 = -18.10dBm = 0.0155mW < 22mW (Test Exclusion Thresholds of 450MHz at 5mm). Therefore, the SAR requirement is deemed to be satisfied without test. ******************************************* END ************************************

- 1 - ANT315M Antenna specification Model ： ANT315M RF:433MHz Measurement data VSWR - 2 - Frequency 433MHZ VSWR ＜１．８ Gain (dBi) ２－３dbi Interface means Soldered on PCB Rated Operational Voltage DC3.3-5V Operating Temperature - 10°C ~ +45°C Drop test 75CM monomer drops to wooden floor surface, function OK Vibration test After different levels of vibration,the function is OK Insulation test ＞ 50M Ω Materials Tinned copper

Magnolia Home Furnishing Inc. RF TEST REPORT Report Type: FCC Part 15.231 & ISED RSS-210 RF report Model: RV1 REPORT NUMBER: 220900422HZH-001 ISSUE DATE: November 18, 2022 DOCUMENT CONTROL NUMBER: TTRF15.231_V1 © 2020 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRF15.231_V1 © 2018 Intertek Page 2 of 27 Report no. 220900422HZH-001 Applicant: Magnolia Home Furnishing Inc. 78 Howard Ave., Oakville, Ontario, Canada Manufacturer: Magnolia Home Furnishing Inc. 78 Howard Ave., Oakville, Ontario, Canada Factory: Shen Zhen Feawell Technology Company Limited 3/F, 8#, Lanshuxia park, Liangantian, Pinghu Longgang District ShenZhen China FCC ID: 2A8S3-RV1 IC: 29420-RV1 SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: 47CFR Part 15 (2020): Radio Frequency Devices (Subpart C) ANSI C63.10 (2013): American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices RSS-210 Issue 10 (December 2019): Licence-exempt Radio Apparatus (All Frequency Bands): Category I Equipment RSS-Gen Issue 5 (March 2019, Amendment 1): General Requirements for Compliance of Radio Apparatus PREPARED BY: REVIEWED BY: Offa Zhou Wakeyou Wang Project Engineer Reviewer Report No. 220900422HZH-001 TEST REPORT TTRF15.231_V1 © 2018 Intertek Page 3 of 27 Content REVISION HISTORY................................................................................................................................................ 4 MEASUREMENT RESULT SUMMARY ..................................................................................................................... 5 1 GENERAL INFORMATION ............................................................................................................................. 6 1.1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ..................................................................................................... 6 1.2 TECHNICAL SPECIFICATION .................................................................................................................................... 6 1.3 DESCRIPTION OF TEST FACILITY .............................................................................................................................. 7 2 TEST SPECIFICATIONS ................................................................................................................................... 8 2.1 STANDARDS OR SPECIFICATION ............................................................................................................................... 8 2.2 MODE OF OPERATION DURING THE TEST ................................................................................................................... 8 2.3 TEST SOFTWARE LIST ............................................................................................................................................ 8 2.4 TEST PERIPHERALS LIST ......................................................................................................................................... 8 2.5 TEST ENVIRONMENT CONDITION: ............................................................................................................................ 9 2.6 INSTRUMENT LIST .............................................................................................................................................. 10 2.7 MEASUREMENT UNCERTAINTY ............................................................................................................................. 11 3 FUNDAMENTAL & SPURIOUS EMISSION & RESTRICT BAND RADIATED EMISSION ...................................... 12 3.1 LIMIT .............................................................................................................................................................. 12 3.2 MEASUREMENT PROCEDURE ............................................................................................................................... 13 3.3 TEST CONFIGURATION ........................................................................................................................................ 14 3.4 TEST RESULTS OF RADIATED EMISSIONS ................................................................................................................. 16 4 POWER LINE CONDUCTED EMISSION ......................................................................................................... 20 4.1 LIMIT .............................................................................................................................................................. 20 4.2 TEST CONFIGURATION ........................................................................................................................................ 20 4.3 MEASUREMENT PROCEDURE ............................................................................................................................... 21 4.4 TES…

Text truncated - open the document above for the full version.

Page 1 of 2 Setup Photos Page 2 of 2