2A8VCK1-ASONIC ELECTRIC TOOTHBRUSH

Product Manual Model: K1-A SONIC ELECTRIC TOOTHBRUSH 6 months (This instruction manual applies to various color versions of the device.) TABLE OF CONTENTS 1 INTENDED USE 2 TECHNICAL DATA 3 SAFETY INSTRUCTIONS 4 EXPLANATION OF SYMBOLS 5 OVERVIEW 6 SET CONTENTS 7 USE 8 CLEANING 9 REPAIR 10 STORAGE AND TRANSPORT 11 DISPOSAL 12 CE DECLARATION 13 WARRANTY 6 months Model: K1-A SONIC ELECTRIC TOOTHBRUSH The sonic toothbrush is intended to be used solely by adults for oral care. It is intended for private indoor use only. It must not be used for professional purposes. It is not intended for industrial or commercial use. It must not be used at healthcare or veterinary facilities. Following the instructions in this manual will ensure safe installation and use of the product. ModelK1-A Power1.5V Power supply 5 V 1 A USB Battery3.7 V 1000 mAh IP class IPX7 No. of strokes 28 000 – 39 000 rpm No. of cleaning programs 6 Charging typewireless Charging timeApprox. 12 hours Operation time at full charge 30 days, 2 times a day, for 2 minutes each Operating and charging temperature range 0-40°C Cleaning time indication 2 minutes (4 x 30 seconds) for programs 1-5, 3 minutes (4 x 45 seconds) for program 6 1 INTENDED USE 2 TECHNICAL DATA 1. Read this manual as a whole before using the product. Failure to observe the manual may result in injuries, other property. 2. Meaning of the symbols used in the manual: Danger! Indicates a dangerous situation, which, if occurs, will result in major injuries. Warning! Indicates a dangerous situation, which, if occurs, may result in major injuries. Caution! Indicates a dangerous situation, 3. The device should not be used or maintained by children younger than 8 or by individuals with limited mental, intellectual, or physical abilities, unless such individuals are supervised or have been instructed how to use the device safely, in compliance with the instruction manual, and understand the hazards involved. 4. The device is not a toy. Children must not play with the device. Children must not clean or perform maintenance of the device unless they are supervised by an adult. 5. The device can only be powered with low voltage electric current matching the markings on the device. 6. Unplug the power supply plug prior to assembly, cleaning, or maintenance of the device components. 7. The charging base power cord is not replaceable. If the power cord becomes damaged, do not attempt to repair it, but replace the charging base with a new one instead. Remember to replace the charging base with an original one to avoid hazards. 8. Warning! Do not use any other charging base to charge the device. Moreover, do not use the charging base included for charging other products, otherwise burns 9. Warning! Clean the power supply plug regularly to avoid dust accumulation. If this happens, moisture 3 SAFETY INSTRUCTIONS Disconnect the power supply, and then wipe the plug clean with a dry cloth. 10. Do not use the device for any purpose other than its intended use. 11. The device is intended solely for private indoor use. It is not suitable for commercial, industrial, medical, or veterinary applications. 12. Do not use the device in locations where the use of electrical devices are forbidden, and where it could result in harmful interference or other hazards. 13. Do not turn on or use the device in the vicinity of flammable materials. 14. Do not use the device for cleaning other surfaces than teeth, gums, and tongue. 15. Warning! Keep the device out of the reach of children and infants. Do not allow children and infants to use the product on their own. Otherwise, it may result in an accident or injury caused by accidental swallowing or 16. Danger! Regularly check the toothbrush head for cracks. A broken toothbrush head may pose a risk of choking. 17. Warning! Discontinue using the product if any of its parts are damaged (the head, the device body, the charging base). 18. Warning! If a failure occurs during operation, turn off shock may occur. 19. Warning! If one of the following faults or failures occurs: – the device or the charging base are deformed or excessively hot – the device or the charging base gives off a burning odor – the device or the charging base emit abnormal sounds during operation or charging, discontinue using and contact the service facility. 20. Prior to using the product, consult a dentist if any of the following circumstances apply to you: – an oral surgery performed within the last 2 months, – an implanted pacemaker or another device in the body, – gum bleeding when using the product, – any other medical conditions. 21. Caution! Individuals with severe periodontal disease, history of tooth disorders, or suspected oral cavity disease should consult a doctor prior to using the device, as the toothbrush may cause discomfort to the teeth and gums. 22. Caution! Individuals with a sensitive oral cavity should not use the product. 23. Caution! Do not press the toothbrush head against the teeth or gums too strongly, do not clean for a prolonged period of time. 24. Caution! Do not share the toothbrush with your family members or other persons, as it may result in injuries to the teeth and gums. 25. When using the device, make sure that next to the brush location there are no items which may get damaged, broken, or overturned. 26. The charging base power cord should be routed so that it does not touch very hot objects. The cord should not be exposed to crushing, pulling, or other damages. 27. The charging base power cord should not hinder the movement of people and pets, as one might trip over it, fall down, and suffer bodily injuries. 28. Danger! Do not clean the charging base when it is connected to the power source. 29. Do not clean the device or the charging base using strong cleaning agents, solvents, etc. 30. Do not expose the charging base and its power cord to water and other liquids, as it may negatively affect the operation and life of the device components, result in a sh…

Text truncated - open the document above for the full version.

SONIC ELECTRIC TOOTHBRUSH FCC ID: 2A8VCK1-A K1-A External Photographs

K1-A Label and Label Location FCC ID: 2A8VCK1-A

SONIC ELECTRIC TOOTHBRUSH FCC ID: 2A8VCK1-A K1-A Tires Internal Photographs

CTC Laboratories, Inc. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel: +86-755- 27521059 Fax: +86-755- 27521011 Http://www.sz-ctc.org.cn RF Exposure Evaluation Report Report No. ··························: CTC20222120E02 FCC ID································: 2A8VCK1-A Applicant····························: BeBeauty (Hangzhou) Technology Co.,Ltd. Address·······························: RM606 Building 1, NO.768 Jianghong Rd, Binjiang District, Hangzhou Zhejiang, 310051 Manufacturer························: BeBeauty (Hangzhou) Technology Co.,Ltd. Address·······························: RM606 Building 1, NO.768 Jianghong Rd, Binjiang District, Hangzhou Zhejiang, 310051 Product Name······················: SONIC ELECTRIC TOOTHBRUSH Trade Mark···························: / Model/Type reference·············: K1-A Listed Model(s) ·····················: K1-B, K2, K3, K4, K5, K6, K7 ,K8, K9, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K30 Standard·····························: 47 CFR FCC Part 1 Date of receipt of test sample...: September 25, 2022 Date of testing.......................: September 25, 2022 to October 05, 2022 Date of issue.........................: October 05, 2022 Result.................................: PASS Compiled by: (Printed name+signature) Zoe Xie Supervised by: (Printed name+signature) Miller Ma Approved by: (Printed name+signature) Totti Zhao $英文检测章$ $Totti$ Testing Laboratory Name ........... : CTC Laboratories, Inc. Address .......................................... : 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China This test report may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CTC. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CTC within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. The test report merely correspond to the test sample. Page 2 of 11 Report No.: CTC20222120E02 CTC Laboratories, Inc. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : http://yz.cnca.cn Table of Contents Page 1. TEST SUMMARY ......................................................................................................................................... 3 1.1. TEST STANDARDS ................................................................................................................................................. 3 1.2. REPORT VERSION ................................................................................................................................................. 3 1.3. TEST FACILITY ...................................................................................................................................................... 4 1.4. MEASUREMENT UNCERTAINTY ............................................................................................................................... 4 1.5. ENVIRONMENTAL CONDITIONS ............................................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................ 6 2.1. CLIENT INFORMATION ........................................................................................................................................... 6 2.2. GENERAL DESCRIPTION OF EUT ............................................................................................................................. 6 2.3. ACCESSORY EQUIPMENT INFORMATION .................................................................................................................... 7 2.4. DESCRIPTION OF TEST MODES ................................................................................................................................ 7 2.5. MEASUREMENT INSTRUMENTS LIST ........................................................................................................................ 7 2.6. EQUIPMENT APPROVAL CONSIDERATIONS ................................................................................................................. 8 2.7. RF EXPOSURE ..................................................................................................................................................... 9 Page 3 of 11 Report No.: CTC20222120E02 CTC Laboratories, Inc. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : http://yz.cnca.cn 1. TEST SUMMARY 1.1. Test Standards The tests were performed according to following standards: ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 680106 D01 RF Exposure Wireless Charging Apps v03: RF Exposure Considerations for Low Power Consumer Wireless Power Transfer Applications. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: mobile devices 1.2. Report version Revised No. Date of issue Description 01…

Text truncated - open the document above for the full version.

Antenna Spe. 1. 30x30cm 2. Frequency 110-205KHz 3. Antenna type: Coil, 0dBi

CTC Laboratories, Inc. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel: +86-755- 27521059 Fax: +86-755- 27521011 Http://www.sz-ctc.org.cn TEST REPORT Report No. ··························: CTC20222120E01 FCC ID································: 2A8VCK1-A Applicant····························: BeBeauty (Hangzhou) Technology Co.,Ltd. Address·······························: RM606 Building 1, NO.768 Jianghong Rd, Binjiang District, Hangzhou Zhejiang, 310051 Manufacturer························: BeBeauty (Hangzhou) Technology Co.,Ltd. Address·······························: RM606 Building 1, NO.768 Jianghong Rd, Binjiang District, Hangzhou Zhejiang, 310051 Product Name······················: SONIC ELECTRIC TOOTHBRUSH Trade Mark···························: / Model/Type reference·············: K1-A Listed Model(s) ·····················: K1-B, K2, K3, K4, K5, K6, K7 ,K8, K9, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K30 Standard·····························: 47 CFR FCC Part 18 Date of receipt of test sample...: September 25, 2022 Date of testing.......................: September 25, 2022 to October 05, 2022 Date of issue.........................: October 05, 2022 Result.................................: PASS Compiled by: (Printed name+signature) Zoe Xie Supervised by: (Printed name+signature) Miller Ma Approved by: (Printed name+signature) Totti Zhao $英文检测章$ $Totti$ Testing Laboratory Name......: CTC Laboratories, Inc. Address...............................: 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China This test report may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CTC. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CTC within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. The test report merely correspond to the test sample. Page 2 of 17 Report No.: CTC20222120E01 CTC Laboratories, Inc. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : http://yz.cnca.cn Table of Contents Page 1. TEST SUMMARY ......................................................................................................................................... 3 1.1. TEST STANDARDS ................................................................................................................................................. 3 1.2. REPORT VERSION ................................................................................................................................................. 3 1.3. TEST DESCRIPTION ............................................................................................................................................... 4 1.4. TEST FACILITY ...................................................................................................................................................... 5 1.5. MEASUREMENT UNCERTAINTY ............................................................................................................................... 5 1.6. ENVIRONMENTAL CONDITIONS ............................................................................................................................... 6 2. GENERAL INFORMATION ............................................................................................................................ 7 2.1. CLIENT INFORMATION ........................................................................................................................................... 7 2.2. GENERAL DESCRIPTION OF EUT ............................................................................................................................. 7 2.3. ACCESSORY EQUIPMENT INFORMATION .................................................................................................................... 8 2.4. DESCRIPTION OF TEST MODES ................................................................................................................................ 8 2.5. MEASUREMENT INSTRUMENTS LIST ........................................................................................................................ 9 3. EMC EMISSION TEST ................................................................................................................................. 10 3.1. RADIATED EMISSION ........................................................................................................................................... 10 3.2. CONDUCTED EMISSION (AC MAINS) ..................................................................................................................... 15 Page 3 of 17 Report No.: CTC20222120E01 CTC Laboratories, Inc. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : http://yz.cnca.cn 1. TEST SUMMARY 1.1. Test Standards The tests were performed according to following standards: 47 CFR FCC Part 18: Industrial, Scientific, and Medical Equipment Unintentional Radiators. ANSI C63.4: 2014: American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic…

Text truncated - open the document above for the full version.

SONIC ELECTRIC TOOTHBRUSH FCC ID: 2A8VCK1-A K1-A Test Setup Photos Radiated emission Conducted Emission RF Exposure Evaluation