2A8XG-WUD52Wireless USB Dongle

Wireless USB Dongle User Manual V1.0 PN: TP90W84A 1 Contents Revision history ............................................................................................................. 2 Introduction.................................................................................................................... 3 Specifications ................................................................................................................ 4 Package content ............................................................................................................ 4 Hardware diagram ......................................................................................................... 5 Mechanical specifications ............................................................................................ 6 Firmware information .................................................................................................... 7 Ordering information ..................................................................................................... 7 Certification ................................................................................................................... 8 FCC Statement ....................................................................................................... 8 End-Product Label ......................................................................................................... 9 FCC ......................................................................................................................... 9 2 Revision history Date Version Description Feb 26, 2024 V1.0 First release. 3 Introduction Wireless USB Dongle is a versatile and low-cost development device enabled by the nRF52840 multiprotocol SoC in a convenient USB dongle form factor. The design features a programmable user button, RGB LED and 2.4G Chip antenna on board. It can be used as a low-cost Bluetooth 5 / Thread / 802.15.4 / ANT / 2.4GHz multiprotocol device or development device. The dongle is pre-installed with UF2 Bootloader that allows you to flash your firmware by just dragging and dropping .uf2 file onto the flash drive without using an external programmer. It also supports Bluetooth LE packet sniffer with Wireshark, which can help the developer to identify and fix issues by allowing a view of what is happening on-air. Figure 1 Wireless USB Dongle 4 Specifications  Nordic Semiconductor nRF52840 System-on-Chip  ARM® Cortex®-M4F processor optimized for ultra-low power operation  Combining Bluetooth® Low Energy 5.0, Bluetooth Mesh, Thread, 802.15.4, ANT and 2.4GHz proprietary  On-chip USB 2.0 (Full speed) controller  ARM TrustZone® Cryptocell 310 security subsystem  1 MB FLASH and 256 kB RAM  User programmable Button and RGB LED  Convenient USB dongle form factor  Pre-installed with UF2 Bootloader and nRF Sniffer for Bluetooth LE firmware  Measures 50.8mm x 21.1mm x 7.6mm  Certifications: FCC, CE, UKCA  RoHS & Reach Compliant Package content  1x Wireless USB Dongle (TP90W84A)  1x Antistatic bag – 6 x 9 cm 5 Hardware diagram The following figure illustrates the Wireless USB Dongle hardware diagram. Figure 2 Hardware diagram 6 Mechanical specifications The mechanical specifications for the dongle show the dimensions in millimeters. Figure 3 Wireless USB Dongle dimensions 7 Firmware information Wireless USB Dongle is pre-installed with the UF2 Bootloader and the nRF Sniffer for Bluetooth LE firmware. The following table shows the pre-installed version of the firmware: Firmware Version information UF2 Bootloader UF2 Bootloader 0.7.1 lib/nrfx (v2.0.0) lib/tinyusb (0.12.0-145- g9775e7691) lib/uf2 (remotes/origin/configupdate-9-gadbb8c7) nRF Sniffer for Bluetooth LE V4.1.1 Ordering information Part Number Manufacturer Part Number Part Name TP90W84A 501002001 Wireless USB Dongle 8 Certification FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 9

- Shenzhen Zaowubang Technology Co.,Ltd. - Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2/23/2024 U.S. Agent Designation Shenzhen Zaowubang Technology Co.,Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2A8XG-WUD52): Name and company of U.S. agent: Microchip Technology Inc. Physical U.S. address of agent: 2355 West Chandler Blvd. Chandler, Arizona, USA 85224-6199 FRN of U.S. agent: 0001596279 Email address of U.S. agent: [email protected] Microchip Technology Inc. acknowledges their obligation to accept service of process on behalf of Shenzhen Zaowubang Technology Co.,Ltd.. Shenzhen Zaowubang Technology Co.,Ltd. with the FRN [0032975658] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). [Name]Zelin Cai [Title]R&D Director [Company] Shenzhen Zaowubang Technology Co.,Ltd. Signature Printed Name: HRUSHIKESH VASUKI Title: Vice President, Business Unit General Manager, WSG Microchip Technology Inc. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature 48_[model] US_Agent_2.911(d)(7) - U, V04

-ShenzhenZaowubangTechnologyCo.,Ltd.- TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB986446D01. FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 3/6/24 Towhomitmayconcern: We,[ShenzhenZaowubangTechnologyCo.,Ltd.],herebycertifythattheequipmentforwhich authorizationissought(FCCID:[2A8XG-WUD52])isnot“covered”equipmentprohibitedfrom receivinganequipmentauthorizationpursuantto§2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,wearenotidentifiedontheCovered List(https://www.fcc.gov/supplychain/coveredlist)asanentityproducing“covered”equipment. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirements listedunder§2.911(b)and(d)(5)and(6). Sincerely, Signature [ZelinCai] [R&DDirector] [ShenzhenZaowubangTechnologyCo.,Ltd.] 6 2 _ [ m o d e l ] C o v e r e d E q u _ 2 . 9 1 1 ( d ) ( 5 ) ( i ) a n d ( i i ) - U , V 0 2

ProjectNo.:18220WC400044Page 1 of 3 AppendixII--ExternalPhotograph ProjectNo.:18220WC400044Page 2 of 3 ProjectNo.:18220WC400044Page 3 of 3

LabelLocationOnEUT Label

ProjectNo.:18220WC400044Page 1 of 3 AppendixIII--InternalPhotograph ProjectNo.:18220WC400044Page 2 of 3 ANT ProjectNo.:18220WC400044Page 3 of 3

RFEXPOSUREEVALUATION FCCID:2A8XG-WUD52 AccordingtoKDB447498D01MobileandPortableDevicesRFExposure ProceduresandEquipmentAuthorizationPoliciesv06. AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeused toevaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF) Radiationasspecifiedin§1.1307(b): RoutineSARevaluationreferstothatspecificallyrequiredby§2.1093,using measurementsorcomputersimulation.WhenroutineSARevaluationisnot required,portabletransmitterswithoutputpowergreaterthantheapplicable lowthresholdrequireSARevaluationtoqualifyforTCBapproval. Channel (MHz) Maximum output power (dBm) Tuneup tolerance (dBm) MaxTuneUp Power(dBm) Distance (mm) Calculation results Limit Operating Mode 2402-1.88-1.88 ±1 -0.88050.2533 BLE_1M 2440-3.18-3.18 ±1 -2.18050.1893 2480-4.72-4.72±1-3.72050.1343 2402-2.78-2.78 ±1 -1.78050.2063 BLE_2M 2440-3.15-3.15 ±1 -2.15050.1903 2480-3.28-3.28±1-2.28050.1863 Result:NoStandaloneSARtestisrequired.

Page1of33 AppendixTestData ReportNo.:18220WC40004401TestSampleNo.:1-2-2 StartTestDate: 2024.1.12 FinishTestDate:2024.1.17 TestEngineer:Auditor: Temperature:25.2 °C RelativeHumidity:45% Pressure:101kPa AppendixA:DTSBandwidth TestResult TestModeAntennaFrequency[MHz] DTSBW [MHz] FL[MHz]FH[MHz]Limit[MHz]Verdict BLE_1MAnt1 24021.2562401.5002402.7560.5PASS 24401.2282439.5682440.7960.5PASS 24801.3082479.4522480.7600.5PASS BLE_2MAnt1 24021.2082401.5682402.7760.5PASS 24401.3362439.4682440.8040.5PASS 24801.2642479.5322480.7960.5PASS Page2of33 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page3of33 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page4of33 BLE_2M_Ant1_2480 Page5of33 AppendixB:OccupiedChannelBandwidth TestResult TestModeAntennaFrequency[MHz] OCB[MHz] FL[MHz]FH[MHz] BLE_1MAnt1 24022.11262401.07032403.1829 24402.10562439.07222441.1778 24802.10682479.06802481.1748 BLE_2MAnt1 24022.08112401.06452403.1456 24402.06962439.09092441.1605 24802.06632479.09122481.1575 Page6of33 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page7of33 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page8of33 BLE_2M_Ant1_2480 Page9of33 AppendixC:Maximumconductedoutputpower TestResultPeak TestModeAntennaFrequency[MHz] ConductedPeak Power[dBm] Conducted Limit[dBm] Verdict BLE_1MAnt1 2402-1.88≤30PASS 2440-3.18≤30PASS 2480-4.72≤30PASS BLE_2MAnt1 2402-2.78≤30PASS 2440-3.15≤30PASS 2480-3.28≤30PASS Page10of33 TestGraphsPeak BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page11of33 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page12of33 BLE_2M_Ant1_2480 Page13of33 AppendixD:Maximumpowerspectraldensity TestResult TestModeAntennaFrequency[MHz]Result[dBm/3kHz]Limit[dBm/3kHz]Verdict BLE_1MAnt1 2402-17.99≤8.00PASS 2440-19.36≤8.00PASS 2480-20.21≤8.00PASS BLE_2MAnt1 2402-18.42≤8.00PASS 2440-17.61≤8.00PASS 2480-19.39≤8.00PASS Page14of33 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page15of33 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page16of33 BLE_2M_Ant1_2480 Page17of33 AppendixE:Bandedgemeasurements TestResult TestMod e Antenn a ChNam e Frequency[MHz ] RefLevel[dBm ] Result[dBm ] Limit[dBm ] Verdic t BLE_1MAnt1 Low2402-2.85-38.48≤-22.85PASS High2480-6.80-55.44≤-26.8PASS BLE_2MAnt1 Low2402-5.70-40.4≤-25.7PASS High2480-5.37-53.46≤-25.37PASS Page18of33 TestGraphs BLE_1M_Ant1_Low_2402 BLE_1M_Ant1_High_2480 BLE_2M_Ant1_Low_2402 Page19of33 BLE_2M_Ant1_High_2480 Page20of33 AppendixF:ConductedSpuriousEmission TestResult TestMod e Antenn a Frequency[MHz ] FreqRange [MHz] RefLeve l [dBm] Result[dBm ] Limit[dBm ] Verdic t BLE_1MAnt1 2402 Reference-4.89-4.89---PASS 30~1000-4.89-68.89≤-24.89PASS 1000~2650 0 -4.89-38.02≤-24.89PASS 2440 Reference-6.00-6.00---PASS 30~1000-6.00-69.2≤-26PASS 1000~2650 0 -6.00-40.77≤-26PASS 2480 Reference-7.89-7.89---PASS 30~1000-7.89-68.88≤-27.89PASS 1000~2650 0 -7.89-43.04≤-27.89PASS BLE_2MAnt1 2402 Reference-5.69-5.69---PASS 30~1000-5.69-38.05≤-25.69PASS 1000~2650 0 -5.69-40.43≤-25.69PASS 2440 Reference-6.74-6.74---PASS 30~1000-6.74-35.87≤-26.74PASS 1000~2650 0 -6.74-40.98≤-26.74PASS 2480 Reference-5.65-5.65---PASS 30~1000-5.65-32.08≤-25.65PASS 1000~2650 0 -5.65-43.84≤-25.65PASS Page21of33 TestGraphs BLE_1M_Ant1_2402_0~Reference BLE_1M_Ant1_2402_30~1000 BLE_1M_Ant1_2402_1000~26500 Page22of33 BLE_1M_Ant1_2440_0~Reference BLE_1M_Ant1_2440_30~1000 Page23of33 BLE_1M_Ant1_2440_1000~26500 BLE_1M_Ant1_2480_0~Reference Page24of33 BLE_1M_Ant1_2480_30~1000 BLE_1M_Ant1_2480_1000~26500 Page25of33 BLE_2M_Ant1_2402_0~Reference BLE_2M_Ant1_2402_30~1000 Page26of33 BLE_2M_Ant1_2402_1000~26500 BLE_2M_Ant1_2440_0~Reference Page27of33 BLE_2M_Ant1_2440_30~1000 BLE_2M_Ant1_2440_1000~26500 Page28of33 BLE_2M_Ant1_2480_0~Reference BLE_2M_Ant1_2480_30~1000 Page29of33 BLE_2M_Ant1_2480_1000~26500 Page30of33 AppendixG:DutyCycle TestResult TestModeAntennaFrequency[MHz] ONTime [ms] Period [ms] DutyCycle [%] DutyCycle Factor[dB] BLE_1MAnt1 2402 19.0019.00 100 0.00 2440 19.0019.00 100 0.00 2480 19.0019.00 100 0.00 BLE_2MAnt1 2402 19.0019.00 100 0.00 2440 19.0019.00 100 0.00 2480 19.0019.00 100 0.00 Page31of33 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page32of33 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page33of33 BLE_2M_Ant1_2480 ---END---

ReportNo.:18220WC40004401FCCID:2A8XG-WUD52Page1of34 FCCTestReport Applicant:ShenzhenZaowubangTechnologyCo.,Ltd. Address: Rm.1003,TanglangBuilding,XueyuanAve, NanshanDistrict,Shenzhen,518100China ProductName:WirelessUSBDongle ReportDate:Mar.06,2024 ShenzhenAnbotekComplianceLaboratoryLimited ReportNo.:18220WC40004401FCCID:2A8XG-WUD52Page2of34 Contents 1.GeneralInformation.................................................................................................................................6 1.1.ClientInformation...........................................................................................................................6 1.2.DescriptionofDevice(EUT)..........................................................................................................6 1.3.AuxiliaryEquipmentUsedDuringTest..........................................................................................7 1.4.Operationchannellist....................................................................................................................8 1.5.DescriptionofTestModes.............................................................................................................8 1.6.MeasurementUncertainty.............................................................................................................8 1.7.TestSummary................................................................................................................................9 1.8.DescriptionofTestFacility...........................................................................................................10 1.9.Disclaimer....................................................................................................................................10 1.10.TestEquipmentList....................................................................................................................11 2.Antennarequirement..............................................................................................................................13 2.1.Conclusion...................................................................................................................................13 3.ConductedEmissionatACpowerline..................................................................................................14 3.1.EUTOperation.............................................................................................................................14 3.2.TestSetup....................................................................................................................................14 3.3.TestData......................................................................................................................................15 4.OccupiedBandwidth..............................................................................................................................17 4.1.EUTOperation.............................................................................................................................17 4.2.TestSetup....................................................................................................................................17 4.3.TestData......................................................................................................................................18 5.MaximumConductedOutputPower......................................................................................................19 5.1.EUTOperation.............................................................................................................................19 5.2.TestSetup....................................................................................................................................19 5.3.TestData......................................................................................................................................19 6.PowerSpectralDensity..........................................................................................................................20 6.1.EUTOperation.............................................................................................................................20 6.2.TestSetup....................................................................................................................................20 6.3.TestData......................................................................................................................................20 7.Emissionsinnon-restrictedfrequencybands.......................................................................................21 7.1.EUTOperation.............................................................................................................................21 7.2.TestSetup....................................................................................................................................21 7.3.TestData......................................................................................................................................21 8.Bandedgeemissions(Radiated)..........................................................................................................22 8.1.EUTOperation.............................................................................................................................22 8.2.TestSetup....................................................................................................................................23 8.3.TestData......................................................................................................................................24 9.Emissionsinfrequencybands(below1GHz).......................................................................................25 9.1.EUTOperation.............................................................................................................................25 9.2.TestSetup......................................…

Text truncated - open the document above for the full version.

version01 ShenzhenZaowubangTechnologyCo.,Ltd. DeclarationconcerningAntennaSpecification Itisherebydeclaredthattheproduct ModelNo.:TP90W84A FCCID:2A8XG-WUD52 fulfillstherequirementinFCCtestrelatingtotheantennatype. ThedevicespecifiedaboveconfirmstotheFCCrecommendationsfor internal antennatype(s) describedbelow: ModelNo.ofantenna:ACA-2012-A1-CC-S Typeofantenna:CeramicsAntenna Gainoftheantenna:1.72dBi Frequencyrange:2400-2483MHz Themountingoftheantennaisfixedtotheradiomoduleandnootherantennashouldbeused. Companyname:ShenzhenZaowubangTechnologyCo.,Ltd. Address:Rm.1003,TanglangBuilding,XueyuanAve,NanshanDistrict,Shenzhen, 518100China City:Shenzhen ZIP/Postalcode:/ Country:China Place:ShenzhenDate:3/6/2024 Signature:

INPAQ TECHNOLOGY CO., LTD 2010/05/25 PAGE 14 OF 4 ACA-2012-A1-CC-S Specification 1. APPLICATION: WLAN, 802.11b/g, Bluetooth, etc... 2. Explanation of part number : AC A _ 2012 _ A1 _ CC _ S (1) (2) (3) (4) (5) (6) (7) (1) Product Type：Chip Antenna (2) Center Frequency/Band Code : A—2442MHz group (3) Size Code: 2.0mm(Length) x 1.2mm(Width) (4) Design Revision Code: Rev.1 (5) CC= Coupling Ceramics Type (6) Special Code: S=RoHS Compliant (7) Suffix For Special Requirements 3. Electrical Specification : * Test condition: Test board size 110*55 mm Matching circuit: Pi matching circuit will be required 4. Physical Dimension : (Unit:mm) UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± INPAQ TECHNOLOGY CO., LTD. SCALE： ----- UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：楊奇峰 CHECKED BY：鄭大福 DESIGNED BY：謝立庭 APPROVED BY： 蘇志銘 TITLE：ACA-2012-A1-CC-S Specification DOCUMENT NO. ENS000030640 SPEC REV. P2 ITEM SPECIFICATION Frequency Band 2400MHz～2483MHz VSWR Less than 3 Polarization Linear *Peak Gain 1.72 dBi Typ. *Peak Efficiency 72.3% Typ. Impedance 50Ω Typ. Chip Antenna L W H A ACA2012 2.0±0.3 1.2±0.3 0.55±0.2 0.4±0.25 INPAQ TECHNOLOGY CO., LTD 2010/05/25 PAGE 24 OF 4 5. Recommend PCB Layout : (Unit:mm) *Clearance 8mm × 2.5mm：All metallization should be removed from all PCB layers. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± INPAQ TECHNOLOGY CO., LTD. SCALE： ----- UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：楊奇峰 CHECKED BY：鄭大福 DESIGNED BY：謝立庭 APPROVED BY： 蘇志銘 TITLE：ACA-2012-A1-CC-S Specification DOCUMENT NO. ENS000030640 SPEC REV. P2 INPAQ TECHNOLOGY CO., LTD 2010/05/25 PAGE 34 OF 4 Power (dBm) 6. Electrical Characteristics : VSWR Radiation Pattern The Gain pattern is measured in INPAQ’s FAR-field chamber. DUT is placed on the table of rotator, a standard horn antenna and Vector Network Analyzer is used to collect data. Z Y X 3D Chamber Definition ◎ 3D Gain Pattern (2442 MHz) Azimuth = 100.0 Elevation = -30.0 Z Roll = -70.0 0 -5 -10 Y -15 X -20 -25 -30 UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± INPAQ TECHNOLOGY CO., LTD. SCALE： ----- UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：楊奇峰 CHECKED BY：鄭大福 DESIGNED BY：謝立庭 APPROVED BY： 蘇志銘 TITLE：ACA-2012-A1-CC-S Specification DOCUMENT NO. ENS000030640 SPEC REV. P2 Mark Frequency VSWR 1 2400 MHz 1.80 2 2442 MHz 1.53 3 2483 MHz 2.28 INPAQ TECHNOLOGY CO., LTD 2010/05/25 PAGE 44 OF 4 ◎ 2D Gain Pattern (2442 MHz) X-Y Plane Y X Y-Z Plane Z Y X-Z Plane Z X UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± INPAQ TECHNOLOGY CO., LTD. SCALE： ----- UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：楊奇峰 CHECKED BY：鄭大福 DESIGNED BY：謝立庭 APPROVED BY： 蘇志銘 TITLE：ACA-2012-A1-CC-S Specification DOCUMENT NO. ENS000030640 SPEC REV. P2 INPAQ TECHNOLOGY CO., LTD 2010/05/25 PAGE 54 OF 4 7. Antenna specification Design Specifications Typical Units 天线形式 Chip 工作频率(working Frequency) 2400MHz～2500MHz MHz 增益（Gain） Peak Gain (Max)1.72 dBi Typ. 天线效率（Antenna efficiency） Peak Efficiency(Max)72.3% Typ. 电压驻波比（VSWR ） ≤3 极化方式 (Polarization) 线极化 轴比(Axial Ratio) >20 辐射方向(Radiation pattern) 全向 馈电阻抗 (impedance) 50 ohm 功率容量(Power handling) Max 30dBm 天线尺寸(Overall dimensions) 2.0mm x 1.2mm x 0.55mm mm 重量(Weight) 5 mg/pcs 工作温度(Working Temp) -40°C to +105°C °C UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± INPAQ TECHNOLOGY CO., LTD. SCALE： ----- UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：楊奇峰 CHECKED BY：鄭大福 DESIGNED BY：謝立庭 APPROVED BY： 蘇志銘 TITLE：ACA-2012-A1-CC-S Specification DOCUMENT NO. ENS000030640 SPEC REV. P2

ProjectNo.:18220WC400044Page 1 of 2 AppendixI--TestSetupPhotograph_RF ConductedEmissionatACpowerline Emissionsinfrequencybands(below1GHz) ProjectNo.:18220WC400044Page 2 of 2 Emissionsinfrequencybands(above1GHz)