
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
ๆ่ดจ่ฆๆฑ80g้็็บธV1.0(20230508)ๅ็ๅ่ก ็ๆฌไฟฎๆน่ฏดๆ ๆจกๅ็บฟ ๅ็็บฟ 75x105mm CMYK4่ฒๅฐๅท / ยฑ1mm ๅ็บฟๅฐบๅฏธ ๅฐๅท้ข่ฒ ่กจ้ขๅค็ ๆๅๅ ฌๅทฎ ้ฃ็ดๆ FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the userโs authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of Adapter Photo 2 Appearance of EUT FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Photo 5 Appearance of EUT
FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Appendix IID Label Appendix II ID Label Location WIFI network mini dome camera FCC ID: 2A8XQ-SD-MN23XXA Model: SD-MN2340A-X4D2-W
FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 6 Internal of EUT Photo 7 Internal of EUT Antenna FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Photo 8 Appearance of PCB Photo 9 Appearance of PCB FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Photo 10 Internal of EUT Photo 11 Internal of EUT FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Photo 12 Appearance of PCB Photo 13 Appearance of PCB FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Photo 14 Appearance of PCB Photo 15 Appearance of PCB
Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202302-0299-5 Page: 1 of 3 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Maximum Permissible Exposure Evaluation FCC ID:2A8XQ-SD-MN23XXA 1. Client Information Applicant : Hangzhou Jiefeng Technology Co.,Ltd. Address : No.1,Jiulong Avenue,Yinhu Street, Fuyang District, Hangzhou, China Manufacturer : Hangzhou Jiefeng Technology Co.,Ltd. Address : No.1,Jiulong Avenue,Yinhu Street, Fuyang District, Hangzhou, China 2. General Description of EUT EUT Name : WIFI network mini dome camera Models No. : SD-MN2340A-X4D2-W, SD-MN2360A-X4D2-W, SD-MN2380A-X4D2-W, SD-MN2440A-X4D2-W, SD-MN2460A-X4D2-W, SD-MN2480A-X4D2-W, SD-MN2540A-X4D2-W, SD-MN2560A-X4D2-W, SD-MN2580A-X4D2-W Model Different : All these models are identical in the same PCB, layout and electrical circuit, the only difference is resolution and illumination of the camera. Product Description : Operation Frequency: 802.11b/g/n(HT20): 2412MHz~2462MHz 802.11n(HT40): 7 channels Antenna Gain: 4.58dBi FPC Antenna Power Rating : Adapter (SK02G-1200200U) Input: 100-240V~ 50/60Hz 0.6A Max Output: 12V2A Software Version : ---- Hardware Version : V1.02 Connecting I/O Port(S) : Please refer to the User's Manual Remark : the evaluation report used the EUT(RW-C-202303-0104-1-2#). Report No.: TBR-C-202302-0299-5 Page: 2 of 3 TB-RF-074-1.0 MPE Calculations for WIFI 1. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 2. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4ฯR 2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 3. Simultaneous transmission MPE Considerations According to KDB447498: All transmitters and antennas in the host must be either evaluated for MPE compliance, by measurement or computational modeling, or qualify for the standalone MPE test exclusion in section 7.1. Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modeled or measured field strengths or power density, is โค 1.0. This means that: โ of MPE ratios โค 1.0 Report No.: TBR-C-202302-0299-5 Page: 3 of 3 TB-RF-074-1.0 4. Test Result: Mode Conducted Power(max) (dBm) Turn-up Power (dB) Max tune up power (dBm) [P] ANT Gain (dBi) [G] Distance (cm) [R] Power Density (mW/ cm 2 ) [S] Limit of Power Density (mW/ cm 2 ) (S) 802.11b 15.659 16ยฑ1 17 4.58 20 0.0286 1 15.9 16ยฑ1 17 4.58 20 0.0286 1 13.37 13ยฑ1 14 4.58 20 0.0143 1 802.11g 11.315 11ยฑ1 12 4.58 20 0.0091 1 16.098 16ยฑ1 17 4.58 20 0.0286 1 11.408 11ยฑ1 12 4.58 20 0.0091 1 802.11n(HT20) 11.252 11ยฑ1 12 4.58 20 0.0091 1 16.182 16ยฑ1 17 4.58 20 0.0286 1 11.755 12ยฑ1 13 4.58 20 0.0114 1 802.11n(HT40) 7.679 8ยฑ1 9 4.58 20 0.0045 1 15.852 16ยฑ1 17 4.58 20 0.0286 1 9.223 9ยฑ1 10 4.58 20 0.0057 1 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range (MHz) Power density (mW/ cm 2 ) 300-1,500 F/1500 1,500-100,000 1.0 For 2.4WIFI :2412~2462 MHz MPE limit S: 1mW/ cm 2 The worst MPE is calculated as 0.0286mW/ cm2 < limit 1mW / cm 2 . So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. 6. Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. -----END OF THE REPORT-----
Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202302-0299-7 Page: 1 of 43 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID:2A8XQ-SD-MN23XXA Report No. : TBR-C-202302-0299-7 Applicant : Hangzhou Jiefeng Technology Co.,Ltd. Equipment Under Test (EUT) EUT Name : WIFI network mini dome camera Model No. : SD-MN2340A-X4D2-W Series Model No. : SD-MN2360A-X4D2-W, SD-MN2380A-X4D2-W, SD-MN2440A-X4D2-W, SD-MN2460A-X4D2-W, SD-MN2480A-X4D2-W, SD-MN2540A-X4D2-W, SD-MN2560A-X4D2-W, SD-MN2580A-X4D2-W Brand Name : ---- Sample ID : RW-C-202302-0299-3-1# & RW-C-202302-0299-3-2# Receipt Date : 2023-03-28 Test Date : 2023-03-28 to 2023-04-26 Issue Date : 2023-04-26 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Witness Engineer : Seven Wu Engineer Supervisor : Ivan Su Engineer Manager : Ray Lai This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202302-0299-7 Page: 2 of 43 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT ............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 6 1.4 Description of Support Units .............................................................................................. 7 1.5 Description of Test Mode .................................................................................................... 7 1.6 Description of Test Software Setting ................................................................................ 9 1.7 Measurement Uncertainty .................................................................................................. 9 1.8 Test Facility ......................................................................................................................... 10 2. TEST SUMMARY ..................................................................................................................... 11 3. TEST SOFTWARE ................................................................................................................... 11 4. TEST EQUIPMENT .................................................................................................................. 12 5. CONDUCTED EMISSION TEST ........................................................................................... 13 5.1 Test Standard and Limit .................................................................................................... 13 5.2 Test Setup ........................................................................................................................... 13 5.3 Test Procedure ................................................................................................................... 13 5.4 Deviation From Test Standard ......................................................................................... 14 5.5 EUT Operating Mode ........................................................................................................ 14 5.6 Test Data ............................................................................................................................. 14 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 15 6.1 Test Standard and Limit .................................................................................................... 15 6.2 Test Setup ........................................................................................................................... 17 6.3 Test Procedure ................................................................................................................... 18 6.4 Deviation From Test Standard ......................................................................................... 19 6.5 EUT Operating Mode ........................................................................................................ 19 6.6 Test Data ............................................................................................................................. 19 7. RESTRICTED BANDS REQUIREMENT ............................................................................. 20 7.1 Test Standard and Limit .................................................................................................... 20 7.2 Test Setup ........................................................................................................................... 20 7.3 Test Procedure ................................................................................................................... 21 7.4 Deviation From Test Standard ......................................................................................... 22 Report No.: TBR-C-202302-0299-7 Page: 3 of 43 TB-RF-074-1.0 7.5 EUT Operating Mode ........................................................................................................ 22 7.6 Test Data ............................................................................................................................. 22 8. BANDWIDTH TEST โฆ
Text truncated - open the document above for the full version.
็ฌฌ 1 ้กต ๅ ฑ 12 ้กต SHENZHEN YINGJIACHUANG ELECTRONIC TECHNOLOGY CO.,LTD http://www.szsyjc.com CUSTOMER NAME Xiong Mai CUSTOMER P/N PART NAME 2.4GHz Black FPC Built-in antenna (Suitable for Binocular ball machine) P/ N YJC-6N055-B62 APPROVAL REV. A0 DELIVERY DATE 2022-7-20 PREPARED BY Teng, Huang CHECKED BY Wenfeng๏ผFang APPROVED BY Customer Approved Prepared By Checked By Approved By Contact address๏ผ ShenZhen Factory๏ผ Building C, Bright Valley No. 11๏ผGuangming District Matianban Shiwei Community๏ผoil Magang๏ผShenzhen Hangzhou Office: 212, Building B, Dahua Jianghong International Innovation zone, No. 369 Internet Street, Binjiang District, Hangzhou TEL๏ผ+86-755 -27810060/23192199 FAX๏ผ+86 -0755 -27810057 Company internet๏ผhttp://www.szsyjc.com E โmail๏ผ[email protected] ็ฌฌ 2 ้กต ๅ ฑ 12 ้กต SHENZHEN YINGJIACHUANG ELECTRONIC TECHNOLOGY CO.,LTD http://www.szsyjc.com Directory 1ใ Cover ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 1 2ใ Directory ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 2 3ใ The resume of Revision ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 3 4ใ Antenna plan map ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 4 5ใ Antenna technical parameters ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 5 6ใ Environmental performance test ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 5 7ใ Physical antenna map and attached position map ยทยทยทยทยทยทยทยทยทยท 6 8ใ Antenna performance testing map ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 6 9ใ OTA Active test data ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 7 10ใ 2D 3D test data ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 8-10 11ใ ROHS Material control reports ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 11 ็ฌฌ 3 ้กต ๅ ฑ 12 ้กต SHENZHEN YINGJIACHUANG ELECTRONIC TECHNOLOGY CO.,LTD http://www.szsyjc.com The resume of the revision version The changes of the contont and the reasons Date Release A/0 First version released 2022-7-21 ็ฌฌ 4 ้กต ๅ ฑ 12 ้กต SHENZHEN YINGJIACHUANG ELECTRONIC TECHNOLOGY CO.,LTD http://www.szsyjc.com Antenna plan๏ผ ็ฌฌ 5 ้กต ๅ ฑ 12 ้กต SHENZHEN YINGJIACHUANG ELECTRONIC TECHNOLOGY CO.,LTD http://www.szsyjc.com Antenna technical parameters and environmental test Electrical Specifications Frequency Range 2400-2500MHz VSWR ๏ผ1.92 Input Impedance 50 ฮฉ Direction All Gain 4.58 dBi Mechanical Specifications Antenna Color Black Input connector XD(II๏ผ Working Temperature -20ยฐC~+70ยฐC Working Humidity 20%~80% Environmental performance testing๏ผ Project Test conditions Specs Storage environmen t Test temperatureใ humidityใatmospheric pressure in the absence of a designation 1. temperature is - 20ยฐC~๏ผ70ยฐC 2. the humidity is 45๏ผ โ85๏ผ 3. the atmospheric pressure is 86kpa-106kpa Normal electrical and mechanical properties Test in High and low temperature Perform 5 circles Between 70 ยฐC and -20 ยฐC๏ผ Check the appearance quality in 1-2H under normal conditions The dimensions should meet the regulations and meet the mechanical and electrical properties ็ฌฌ 6 ้กต ๅ ฑ 12 ้กต SHENZHEN YINGJIACHUANG ELECTRONIC TECHNOLOGY CO.,LTD http://www.szsyjc.com Test of the resistance in constant damp and heat relative humidity 95ยฑ3%๏ผthe test temperature:40ยฐC.After 2H persistent working๏ผ measure the electrical properties within 5 minutes after the sample was taken out. The dimensions should meet the regulations and meet the mechanical and electrical properties Vibration test Frequency range 10-55HZ๏ผ amplitude of displacement๏ผ0.35MM๏ผAmplitude of acceleration๏ผ50.0M/S๏ผNumber of sweep cycles๏ผ 30 times Normal electrical and mechanical properties Drop test 3 times free fall in the 1M perpendicular direction Normal electrical and mechanical properties ็ฌฌ 7 ้กต ๅ ฑ 12 ้กต SHENZHEN YINGJIACHUANG ELECTRONIC TECHNOLOGY CO.,LTD http://www.szsyjc.com Physical antenna map and attached position map: Antenna performance testing map: ็ฌฌ 8 ้กต ๅ ฑ 12 ้กต SHENZHEN YINGJIACHUANG ELECTRONIC TECHNOLOGY CO.,LTD http://www.szsyjc.com OTA Active test data: Item Measureme nt Band Channel Frequency Max Min Total 1 TRP WIFI_B (11M) 1 2412 17.95 5.82 14.43 2 TRP WIFI_B (11M) 6 2437 18.41 6.09 14.74 3 TRP WIFI_B (11M) 11 2462 18.08 4.55 14.58 4 TIS(EIRP) WIFI_B (11M) 1 2412 -75.11 -86.29 -82.79 5 TIS(EIRP) WIFI_B (11M) 6 2437 -74.59 -85.81 -82.14 6 TIS(EIRP) WIFI_B (11M) 11 2462 -74.44 -87.03 -83.33 7 TRP WIFI_G (6M) 1 2412 16.07 3.90 12.63 8 TRP WIFI_G (6M) 6 2437 16.87 4.88 13.34 9 TRP WIFI_G (6M) 11 2462 16.08 2.68 12.61 10 TIS(EIRP) WIFI_G (54M) 1 2412 -59.60 -70.75 -67.31 11 TIS(EIRP) WIFI_G (54M) 6 2437 -61.76 -72.73 -69.20 12 TIS(EIRP) WIFI_G (54M) 11 2462 -62.29 -74.63 -71.16 13 TRP WIFI_N_ISM (6.5M) 1 2412 14.48 0.60 10.38 14 TRP WIFI_N_ISM (6.5M) 6 2437 12.56 1.49 9.71 15 TRP WIFI_N_ISM (6.5M) 11 2462 15.62 -9.16 11.69 ็ฌฌ 9 ้กต ๅ ฑ 12 ้กต SHENZHEN YINGJIACHUANG ELECTRONIC TECHNOLOGY CO.,LTD http://www.szsyjc.com 2D 3D test data (2.4G test data) Frequency Efficiency (%) Gain.(dBi) 2400MHz 56.49 3.87 2410MHz 61.66 4.13 2420MHz 60.26 3.76 2430MHz 63.83 4.58 2440MHz 58.21 3.87 2450MHz 64.86 4.04 2460MHz 62.81 4.20 2470MHz 61.94 4.23 2480MHz 59.43 3.79 2490MHz 63.10 4.38 2500MHz 61.80 4.30 (phi 0 2D picture) ็ฌฌ 10 ้กต ๅ ฑ 12 ้กต SHENZHEN YINGJIACHUANG ELECTRONIC TECHNOLOGY CO.,LTD http://www.szsyjc.com (phi 90 2D picture) (Theta 90 2D picture) ็ฌฌ 10 ้กต ๅ ฑ 11 ้กต SHENZHEN YINGJIACHUANG ELECTRONIC TECHNOLOGY CO.,LTD http://www.szsyjc.com V 3D test picture ๏ผ3D 2400MHz๏ผ ๏ผ3D 2450MHz๏ผ ๏ผ3D 2500MHz๏ผ ROHS Material control reports It is certified that the raw materials used in auxiliary materials, and the additives in the production process meet the RoHS requirements of the use of Hazardous Substances. ๏ผRoHS instruction 2011/65/EC) The following reports are made on the composition of components and auxiliary materials, packaging materials, and additives used in the production process Component /Part Name Material Composition ICP report # Test Org. Test Date Hazardous substance content (ppm) PASS? Cd Pb Hg Cr 6+ P B B PBDE PASS FPC FPCFlex board SHAEC2202460504 SGS 22/02/21 ND ND ND ND N D ND PASS XD(II๏ผ Tin- phosphor bronze CANEC2201952008 SGS 22/02/18 ND 5โฆ
Text truncated - open the document above for the full version.
Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add๏ผ1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202302-0299-7 Page: 1 of 63 FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 RF Test Data for 2.4G WiFi (Conducted Measurements) General Description of EUT Product Name: WIFI network mini dome camera Test Model: SD-MN2340A-X4D2-W Sample ID: RW-C-202302-0299-3-2# Environmental Conditions Temperature: 24ยฐC Relative Humidity: 56% Test Voltage: DC 12V Test Engineer: Huang jian ping Note: For a more detailed features description, please refer to the report TBR-C-202302-0299-7 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add๏ผ1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202302-0299-7 Page: 2 of 63 FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Contents 1. Duty Cycle ............................................................................................................................................................................................... 3 2. Maximum Conducted Output Power ................................................................................................................................................... 10 3. -6dB Bandwidth ..................................................................................................................................................................................... 11 4. Occupied Channel Bandwidth ............................................................................................................................................................. 18 5. Maximum Power Spectral Density Level ............................................................................................................................................ 25 6. Band Edge ............................................................................................................................................................................................. 32 7. Conducted RF Spurious Emission ...................................................................................................................................................... 41 8. Restrict Band ......................................................................................................................................................................................... 54 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add๏ผ1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202302-0299-7 Page: 3 of 63 FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT b 2412 Ant1 90.12 0.45 0.09 NVNT b 2437 Ant1 90.12 0.45 0.09 NVNT b 2462 Ant1 90.12 0.45 0.09 NVNT g 2412 Ant1 89.57 0.48 0.53 NVNT g 2437 Ant1 89.62 0.48 0.53 NVNT g 2462 Ant1 89.62 0.48 0.53 NVNT n(HT20) 2412 Ant1 89.85 0.46 0.56 NVNT n(HT20) 2437 Ant1 89.85 0.46 0.56 NVNT n(HT20) 2462 Ant1 89.34 0.49 0.57 NVNT n(HT40) 2422 Ant1 80.56 0.94 1.15 NVNT n(HT40) 2437 Ant1 81.31 0.9 1.15 NVNT n(HT40) 2452 Ant1 80.56 0.94 1.15 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add๏ผ1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202302-0299-7 Page: 4 of 63 FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Test Graphs Duty Cycle NVNT b 2412MHz Ant1 Duty Cycle NVNT b 2437MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add๏ผ1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202302-0299-7 Page: 5 of 63 FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Duty Cycle NVNT b 2462MHz Ant1 Duty Cycle NVNT g 2412MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add๏ผ1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202302-0299-7 Page: 6 of 63 FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Duty Cycle NVNT g 2437MHz Ant1 Duty Cycle NVNT g 2462MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add๏ผ1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202302-0299-7 Page: 7 of 63 FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Duty Cycle NVNT n(HT20) 2412MHz Ant1 Duty Cycle NVNT n(HT20) 2437MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add๏ผ1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202302-0299-7 Page: 8 of 63 FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Duty Cycle NVNT n(HT20) 2462MHz Ant1 Duty Cycle NVNT n(HT40) 2422MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add๏ผ1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202302-0299-7 Page: 9 of 63 FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Duty Cycle NVNT n(HT40) 2437MHz Ant1 Duty Cycle NVNT n(HT40) 2452MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add๏ผ1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202302-0299-7 Page: 10 of 63 FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Limit (dBm) Verdict NVNT b 2412 Ant1 15.659 30 Pass NVNT b 2437 Ant1 15.9 30 Pass NVNT b 2462 Ant1 13.37 30 Pass NVNT g 2412 Ant1 11.315 30 Pass NVNT g 2437 Ant1 16.098 30 Pass NVNT g 2462 Ant1 11.408 30 Pass NVNT n(HT20) 2412 Ant1 11.252 30 Pass NVNT n(HT20) 2437 Ant1 16.182 30 Pass NVNT n(HT20) 2462 Ant1 11.755 30 Pass NVNT n(HT40) 2422 Ant1 7.679 30 Pass NVNT n(HT40โฆ
Text truncated - open the document above for the full version.
FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Appendix V EUT Test Photographs Photo of Setup for Radiated Emission (Below 1 GHz) Photo of Setup for Radiated Emission (Above 1 GHz) FCC ID: 2A8XQ-SD-MN23XXA TB-RF-074-1.0 Photo of Setup for Radiated Emission (Above 1 GHz) Photo of Setup for Conducted Emission -----END OF THE REPORT-----
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.41 GHz - 2.46 GHz | 41.50 mW |

Dual Lens Security Camera
Equipment Class
DTS - Digital Transmission System