2A8YA-NW5000Carbon Fiber Magnetic Wireless Power Bank

FCC WarningThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Refer to KDB 784748 Anner A section A.5:(a)Max. Electric Field Emissions: 0.2978V/m Max. Magnetic Field Emissions: 0.2419A/m(b) The maintenance of the system is the responsibility of the manufacturer. (c) To prevent interference, the product should be as far away from devices operating at the same frequency as possible.

Reference No.: WTX23X11243517W001 Page 2 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 2 - EUT EXTERNAL PHOTOGRAPHS EUT View 1 EUT View 2 Reference No.: WTX23X11243517W001 Page 3 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 3 EUT View 4 Reference No.: WTX23X11243517W001 Page 4 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 5 EUT View 6 Reference No.: WTX23X11243517W001 Page 5 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 7

Reference No.: WTX23X11243517W001 Page 1 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: 2A8YA-NW5000 Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the device’s expected lifetime. Proposed Label Location on EUT FCC ID Label Location

Reference No.: WTX23X11243517W001 Page 6 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 3 - EUT INTERNAL PHOTOGRAPHS EUT Housing and Board View 1 Solder Board-Component View 1 Reference No.: WTX23X11243517W001 Page 7 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 2 Antenna View Wireless Charging Antenna

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 20 TEST REPORT Reference No. ................... .: WTX23X11243517W002 FCC ID ............................... .: 2A8YA-NW5000 Applicant .......................... .: SYSMAX Innovations Co., Ltd. Address ............................ .: Unit 6355,5/F,No.1021 Gaopu Road,Tianhe District,Guangzhou,510653, Guangdong,China Manufacturer .................... .: Sysmax Power Technology.LLC Address ............................ .: Room 401, Building 2, No. 2, Huahong East Street, Gaopu Town, Dongguan City, Guangdong Province Product Name .................. .: Carbon Fiber Magnetic Wireless Power Bank Model No... ........................ .: NW5000 Standards ......................... .: KDB 680106 D01 V04 Date of Receipt sample ... .: 2023-11-15 Date of Test....................... .: 2023-11-15 to 2023-12-14 Date of Issue .................... .: 2023-12-14 Test Report Form No. ...... . : WTX_KDB 680106_D01_V03W Test Result ........................ .: Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Email: [email protected] Tested by: Approved by: Dashan Chen Silin Chen Reference No.: WTX23X11243517W002 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 2 of 20 TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................... 4 1.2 AUXILIARY EQUIPMENT LIST AND DETAILS ........................................................................................................... 5 1.3 TEST EQUIPMENT LIST AND DETAILS ..................................................................................................................... 6 2. RF EXPOSURE TEST REPORT ............................................................................................................................ 7 2.1 STANDARD APPLICABLE ......................................................................................................................................... 7 2.2 TEST CONDITIONS .................................................................................................................................................. 8 2.3 TEST PROCEDURE ................................................................................................................................................... 9 2.4 TEST RESULT........................................................................................................................................................ 10 2.5 MEASUREMENT UNCERTAINTY ............................................................................................................................ 18 2.6 TEST PHOTOS ....................................................................................................................................................... 19 APPENDIX PHOTOGRAPHS ................................................................................................................................... 20 Reference No.: WTX23X11243517W002 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 3 of 20 Report version Version No. Date of issue Description Rev.00 2023-12-14 Original / / / Reference No.: WTX23X11243517W002 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 4 of 20 1. GENERAL INFORMATION 1.1 Product Description for Equipment under Test (EUT) General Description of EUT Product Name: Carbon Fiber Magnetic Wireless Power Bank Trade Name: NITECORE Model No.: NW5000 Adding Model(s): / Battery Capacity / Note: The test data is gathered from a production sample, provided by the manufacturer. Technical Characteristics of EUT Frequency Range: 110~205kHz Modulation Type: FSK Antenna Type: Coil Antenna Antenna Gain 0dBi Rated Voltage: Battery Capacity: 5000mAh(19.25Wh) Type C Input: 5V, 9V,12V Type C output: 5V, 9V,12V Wireless Charger: 5W/7.5W/10W/15W Total Output: 20W Max Rated Current: Input : 2.4A/ 2A/1.5A Output : 2.4A/ 2.22A/1.67A Rated Power: Wireless Output : 5W, 7.5W, 10W,15W Total Output: 20W Max Note The Antenna Gain is provided by the customer and can affect the validity of results. Reference No.: WTX23X11243517W002 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 5 of 20 1.2 Auxiliary Equipment List and Details Auxiliary Equipment List and Details Description Manufacturer Model Serial Number / / / / Reference No.: WTX23X11243517W002 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 6 of 20 1.3 Test Equipment List and Details Description Manufacturer Model Serial No. Cal Date Due Date ELECTRIC AND MAGNETIC FIELD ANALYZER Narda EHP-200AC 180ZX10226 2021-05-20 2024-05-19 Note: The deviation response is 0.8dB. Reference No.: WTX23X11243517W002 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 7 of 20 2. RF Exposure Test Report 2.1 Standard Applicable According to§1.1310 system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. Reference No.: WTX23X11243517W002 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 8 of 20 2.2 Test Conditions Test Mode Description Remark AC adapter Mode: TM1 Wireless Charging Inp…

Text truncated - open the document above for the full version.

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 27 TEST REPORT Reference No. ....................: WTX23X11243517W001 FCC ID ............................... .: 2A8YA-NW5000 Applicant .......................... .: SYSMAX Innovations Co., Ltd. Address ............................ .: Unit 6355,5/F,No.1021 Gaopu Road,Tianhe District,Guangzhou,510653, Guangdong,China Manufacturer .................... .: Sysmax Power Technology.LLC Address ............................ .: Room 401, Building 2, No. 2, Huahong East Street, Gaopu Town, Dongguan City, Guangdong Province Product Name .................. .: Carbon Fiber Magnetic Wireless Power Bank Model No... ........................ .: NW5000 Standards ......................... .: FCC Part 15.207&15.209 Date of Receipt sample ... .: 2023-11-15 Date of Test....................... .: 2023-11-15 to 2023-12-14 Date of Issue .................... .: 2023-12-14 Test Report Form No. ...... . : WTX_Part 15_207_209W Test Result ........................ .: Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Email: [email protected] Tested by: Approved by: Dashan Chen Silin Chen Reference No.: WTX23X11243517W001 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 2 of 27 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ......................................................................... 4 1.2 TEST STANDARDS ................................................................................................................................................. 5 1.3 TEST METHODOLOGY ........................................................................................................................................... 5 1.4 TEST FACILITY ...................................................................................................................................................... 5 1.5 EUT SETUP AND OPERATION MODE ................................................................................................................... 6 1.6 MEASUREMENT UNCERTAINTY ............................................................................................................................. 7 1.7 TEST EQUIPMENT LIST AND DETAILS ................................................................................................................... 8 2. SUMMARY OF TEST RESULTS ......................................................................................................................... 11 3. ANTENNA REQUIREMENT ................................................................................................................................. 12 3.1 STANDARD APPLICABLE ..................................................................................................................................... 12 3.2 TEST RESULT ...................................................................................................................................................... 12 4. CONDUCTED EMISSIONS .................................................................................................................................. 13 4.1 TEST PROCEDURE .............................................................................................................................................. 13 4.2 BASIC TEST SETUP BLOCK DIAGRAM ................................................................................................................ 13 4.3 ENVIRONMENTAL CONDITIONS ........................................................................................................................... 13 4.4 SUMMARY OF TEST RESULTS/PLOTS ................................................................................................................. 13 5. RADIATED EMISSION .......................................................................................................................................... 16 5.1 STANDARD APPLICABLE ..................................................................................................................................... 16 5.2 TEST PROCEDURE .............................................................................................................................................. 16 5.3 TEST RECEIVER SETUP ...................................................................................................................................... 18 5.4 CORRECTED AMPLITUDE & MARGIN CALCULATION ........................................................................................... 18 5.5 ENVIRONMENTAL CONDITIONS ........................................................................................................................... 18 5.6 SUMMARY OF TEST RESULTS/PLOTS ................................................................................................................. 18 6. OCCUPIED BANDWIDTH .................................................................................................................................... 25 6.1 STANDARD APPLICABLE ..................................................................................................................................... 25 6.2 TEST PROCEDURE .......................................................................................................................................…

Text truncated - open the document above for the full version.

SPECIFICATIONS SHEET:1 OF 1 1.DIMENSIONS(UNIT:mm）. A Coil inner diameter 20.5±0.2 B Coil outer diameter 41±1 C Magnetic sheet outer diameter 43±0.5 DThe lead is long 50±2 E Solder length 2-4 F-1 Magnetic sheet thickness 0.6±0.5 F-2 Coil thickness 0.65±0.1 F Module thickness 1.5 MAX

Reference No.: WTX23X11243517W001 Page 8 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 4 - TEST SETUP PHOTOGRAPHS Conducted Emission Test Setup Radiation Emission Test Setup (Below 30MHz) Reference No.: WTX23X11243517W001 Page 9 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Radiation Emission Test Setup (30MHz to 1GHz) ***** END OF REPORT *****