2A8ZB-G129SAMRT WATCH

Smartwatch user manual Downloading the App Scan the following QR code, download and install the App. Scan QR code and Download Charging the watch Charge the device before first use. To charge your device, plug the charging cable into your adapter or USB port computers. Pairing the app with the watch The MAC address on the Settings About page can help you identify your device in the scan list. Open the app and fill out your profile. Go to "Devices" and click "Add Device" Select your device in the list of device scans Couple Use the touchscreen control center Function menu pages News Center Phone call Connects to the watch via Bluetooth from the phone to make and receive calls (Note: Other functions need to be connected to the watch via the app (Da Fit) in order to use them). Phone call Please note when using 1 . If the watch has been connected to another mobile phone, please disconnect it from the original mobile phone first. At the same time, the watch will restore factory settings once you have completed the settings. 2. Please note that the Bluetooth name of the call connection isG129 3. Please do not leave the phone more than 5 meters away from the phone during a call, otherwise the calquality will be affected . Smartwatch functions Tap the icon to activate the phone's voice assistant. You can use your watch to control your phone's voice assistant. Silent alarm Set the alarm in the app and the device will vibrate to remind you of the time. AI voice assistant Remind you to exercise The device vibrates to remind you to move after an hour of sitting. Note: You can turn on/off the function in the APP. Sleep When you wear the smart watch while sleeping, it can display the hours slept and the quality of sleep both on the screen and in the APP. NOTE: Sleep statistics reset to zero at 8:00 p.m. Heart rate check The smartwatch can record your heart rate throughout the day. You can also tap the side to start measuring heart rate. Note: This product is not a medical device. All measurements and results are for reference only and are not intended for medical use ! Smartwatch functions Pedometer The smartwatch automatically counts your steps on the screen. Note: Your movement statistics will reset to zero at midnight. Training Tap the workout icon in the menu to start a new workout recording. There are 123 sports to choose from, the last training recording is displayed on the training page. Blood pressure measurement Tap the Blood Pressure page to start measuring your blood pressure. The most recent blood pressure measurement data can be displayed on the blood pressure page. Note: This product is not a medical device. All measurements and results are for reference only and are not intended for medical purposes ! Spo2 measurement Tap the Spo2 page to start your Spo2 measurement. On the Spo2 page, you can view the recent Spo2 measurement data. Note: This product is not a medical device. All measurements and results are for reference only and are not intended for medical purposes ! Weather It could display today's and tomorrow's weather information on the weather page. The weather information will be synchronized with the APP after connecting, it will not be updated if the connection is lost for a long time. Smartwatch functions Message reminder The device can sync incoming notifications from Twitter, Facebook, Whatsapp, Instagram, etc. The last 5 messages can be saved. Note: You can turn on/off incoming notifications in the APP. Camera control Your watch can be used as a remote control for your phone's camera Music control Your watch can be used as a remote control for your phone's music player. More functions Other features include stopwatch, alarm, timer, brightness, mute, power save, factory reset, power off and more Stopwatch On the stopwatch page, tap the Start button to start timing and the Stop button to stop timing. 1. Environmental conditions Operating Temperature: 14°F to 122°F ( -10°C to 50°C) Non-operating temperature: -4°F to 140°F ( -20°C to 60°C) 2. Size Fits a wrist with a circumference between 5.5 and 7.7 inches 3. Disposal and recycling Please note that it is the consumer's responsibility to properly dispose of and recycle the smartwatch and related accessories. Please do not dispose of your smartwatch with normal household waste. Smartwatches are considered electronic waste and should be taken to a local collection point for electronic devices. For further information, please contact your local electronic equipment disposal authority or the retailer where you purchased the product More about this device 1 . Use Quick View Quick View lets you check the time on your smartwatch or information on your phone without having to press a button. Simply turn your wrist towards you and the watch screen will become visible. General information and specifications FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved …

Text truncated - open the document above for the full version.

ShenzhenWeiwoIntelligentElectronicsCo.,Ltd Floor2,buildingA7,No.416,XuegangNorthRoad,Qinghucommunity,Longhua street,LonghuaDistrict,Shenzhen,China FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 2024-8-20 Towhomitmayconcern: We,ShenzhenWeiwoIntelligentElectronicsCo.,Ltd,herebycertifythattheequipmentforwhich authorizationissought(FCCID:2A8ZB-G129)isnot“covered”equipmentprohibitedfromreceiving anequipmentauthorizationpursuantto§2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,wearenotidentifiedontheCovered List(https://www.fcc.gov/supplychain/coveredlist)asanentityproducing“covered”equipment. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirements listedunder§2.911(b)and(d)(5)and(6). TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRas wellasKDB986446D01. Sincerely, {新申请人签名} Signature MayHu ---- ShenzhenWeiwoIntelligentElectronicsCo.,Ltd 6 2 _ [ m o d e l ] C o v e r e d E q u _ 2 . 9 1 1 ( d ) ( 5 ) ( i ) a n d ( i i ) - U , V 0 3

Shenzhen Weiwo Intelligent Electronics Co., Ltd Floor 2, building A7, No. 416, Xuegang North Road,Qinghu community, Longhua street,Longhua District, Shenzhen,China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-8-20 U.S. Agent Designation Shenzhen Weiwo Intelligent Electronics Co., Ltdacknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID:2A8ZB-G129): Name and company of U.S. agent:ACT Lab LLC Physical U.S. address of agent:3280 East 59th Street Long Beach, CA 90805 United States FRN of U.S. agent:0033465568 Email address of U.S. agent:[email protected] ACT Lab LLCacknowledges their obligation to accept service of process on behalf ofShenzhen Weiwo Intelligent Electronics Co., Ltd. Shenzhen Weiwo Intelligent Electronics Co., Ltdwith the FRN[0032993859]accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, {新申请人签名} Signature May Hu ---- Shenzhen Weiwo Intelligent Electronics Co., Ltd {代理商签名} Signature Scott Huber Senior Technical Director ACT Lab LLC 48_[model] US_Agent_2.911(d)(7)-U, V05

CONFIDENTIALITYREQUEST forCertificationServiceinUSA FederalCommunicationCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21046 Date:<2024-8-20> PursuanttoParagraphs§0.457and0.459oftheCommission’sRules(47C.F.R.)and Section§552(b)(4)oftheFreedomofInformationAct,werequestsconfidentialityfor thefollowingproducts: FCCIDModelname 2A8ZB-G129G129 Fortheproductstatedabove,werequestthatthefollowinginformationbeheld confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term ConfidentialityDays ExternalPhotos InternalPhotos BlockDiagram Schematics TestSetupPhotos User’sManual PartsList TuneUp OperationalDescriptions Thelong-termconfidentialityexhibitscontainourtradesecretsandproprietary informationthatcouldbeofbenefittoourcompetitors. Theshort-termconfidentialityonthebasisofensuringthatbusinesssensitive informationremainsconfidentialuntiltheactualmarketingofournewdevice. Ifyouhaveanyquestions,pleasefeelfreetocontactmeattheaddressshownbelow. Sincerely, {新申请人签名} Name/Title： MayHu/---- Company: ShenzhenWeiwoIntelligentElectronicsCo.,Ltd Address: Floor2,buildingA7,No.416,XuegangNorthRoad,Qinghu community,Longhuastreet,LonghuaDistrict, Shenzhen,China Phone: +8613509698051 Fax: E-Mail: [email protected]

ShenzhenWeiwoIntelligentElectronicsCo.,Ltd Floor2,buildingA7,No.416,XuegangNorthRoad,Qinghucommunity,Longhuastreet,LonghuaDistrict, Shenzhen,China FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 2024-8-20 Towhomitmayconcern: We,theundersigned,herebyauthorizeEurofinsProductServiceGmbHtoactonourbehalfinall mattersrelatingtoapplicationsforequipmentauthorizationFCCID:2A8ZB-G129includingthe signingofalldocumentsrelatedtothesematters. AnyandallactscarriedoutbyEurofinsProductServiceGmbHonourbehalfshallhavethesame effectasactsofourown. Bysigningthisapplicationform,weagreetoEurofins’currentvalidGeneralTermsandConditions (AGB),TestingandCertificationRegulations(PZO)whichcanbeviewedonfollowingwebsite www.eurofins.de/eeorretrievedonrequest. Wealsoherebycertifythatnopartytothisapplicationissubjecttoadenialofbenefits,includingFCC benefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21U.S.C.862. Sincerely, {新申请人签名} Name/Title： MayHu/---- Company: ShenzhenWeiwoIntelligentElectronicsCo.,Ltd Address: Floor2,buildingA7,No.416,XuegangNorthRoad,Qinghu community,Longhuastreet,LonghuaDistrict, Shenzhen,China Phone: +8613509698051 Fax: E-Mail: [email protected]

FCC ID: 2A8ZB-G129 TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID: 2A8ZB-G129 TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID: 2A8ZB-G129 TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID: 2A8ZB-G129 TB-RF-074-1.0 Photo 7 Appearance of EUT

FCC ID: 2A8ZB-G129 TB-RF-074-1.0 Appendix I Label Appendix II Label Location FCC ID: 2A8ZB-G129 Model: G129

FCC ID: 2A8ZB-G129 TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 8 Internal of EUT Photo 9 Appearance of PCB FCC ID: 2A8ZB-G129 TB-RF-074-1.0 Photo 10 Appearance of PCB Photo 11 Battery Appearance BT Antenna

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202407-0182-16 Page: 1 of 3 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Maximum Permissible Exposure Evaluation FCC ID: 2A8ZB-G129 1. General Information about EUT 1.1 Client Information Applicant : Shenzhen Weiwo Intelligent Electronics Co.. Ltd Address : Floor 2, building A7, No. 416, Xuegang North Road,Qinghu community, Longhua street,Longhua District, Shenzhen,China Manufacturer : Shenzhen Weiwo Intelligent Electronics Co.. Ltd Address : Floor 2, building A7, No. 416, Xuegang North Road,Qinghu community, Longhua street,Longhua District, Shenzhen,China 1.2 General Description of EUT (Equipment Under Test) EUT Name : SMART WATCH Models No. : G129 Model Different : N/A Brand Name : N/A Sample ID : HC-C-202407-0182-01-01 Product Description : Operation Frequency: Bluetooth&BLE: 2402MHz~2480MHz Antenna Gain: 0dBi Conducting wire Antenna Power Rating : USB Input: DC 5V DC 3.7V 300mAh Rechargeable Li-ion battery Software Version : MOY-J8V2-2.0.1-926008BA Hardware Version : MOY.MA1006.02 Remark: The above antenna information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications, the laboratory shall not be held responsible. Report No.: TBR-C-202407-0182-16 Page: 2 of 3 TB-RF-074-1.0 SAR Test Exclusion Calculations 1. FCC: According to KDB 447498 D01 Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies v06. (1) Clause 4.3: General SAR test reduction and exclusion guidance Sub clause 4.31: Standalone SAR test exclusion considerations 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6GHz at test separation distance≤5 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√ f (GHz) ] ≤3.0 for 1-g SAR [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√ f (GHz) ] ≤7.5.0 for 10-g SAR 2. Summary simultaneous transmission for SAR Exclusion The SAR exemption limits outlined in clause 4.3.2(b) of KDB 447498 have been derived based on an approximate SAR value of 0.4 W/kg using half-wave dipole antennas Footnote 1. As such, when simultaneous transmitter SAR evaluations include transmitters that have been exempt from routine SAR evaluation, the SAR must be estimating based on the ratio between the maximum tune-up tolerance limit of the transmitter that has been exempt and the exemption limit at the specific distance and frequency for that transmitter. This ratio must be multiplied by 0.4 W/kg (2.0 W/kg for controlled use and 1.0 W/kg for limb worn devices) in order to calculate the estimated SAR level. The estimate SAR value is calculated based the following equation: (maximum power level including tune-up tolerance for transmitter A / maximum power level of exemption at the same frequency and distance) * 0.4W/kg The [∑ of (the highest measured or estimated SAR for each standalone antenna configuration, adjusted for maximum tune-up tolerance) / 1.6 W/kg] + [∑ of MPE ratios] is ≤ 1.0. The SAR to peak location separation ratios of all simultaneously transmitting antenna pairs operating in portable device exposure conditions are all ≤ 0.04, and the [∑ of MPE ratios] is ≤ 1.0. Report No.: TBR-C-202407-0182-16 Page: 3 of 3 TB-RF-074-1.0 3. Calculation: Test separation: 5mm Bluetooth Mode (GFSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 5.46 6±1 7 5.012 1.554 3.0 2441 5.619 6±1 7 5.012 1.566 3.0 2480 5.414 6±1 7 5.012 1.579 3.0 Bluetooth Mode (π/4-DQPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 6.444 6±1 7 5.012 1.554 3.0 2441 6.175 6±1 7 5.012 1.566 3.0 2480 5.83 6±1 7 5.012 1.579 3.0 Bluetooth Mode (8-DPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 6.72 6±1 7 5.012 1.554 3.0 2441 6.412 6±1 7 5.012 1.566 3.0 2480 6.009 6±1 7 5.012 1.579 3.0 BLE 1M Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 5.966 6±1 7 5.012 1.554 3.0 2440 5.792 6±1 7 5.012 1.566 3.0 2480 5.511 6±1 7 5.012 1.579 3.0 BLE 2M Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 5.502 6±1 7 5.012 1.554 3.0 2440 5.395 6±1 7 5.012 1.566 3.0 2480 5.207 6±1 7 5.012 1.579 3.0 Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06. -----END OF REPORT-----

深圳市一线通线缆有限公司 地址：深圳市宝安区沙井街道万丰98工业城21栋 天线规格承认书 Antenna Specification for Approval 客户名 称 CustomerName：深圳市魔样科技有限公司 产品名称： ProductName： 2.4G天线 全长25mm红色 客户型号： ProductName: 产品料号： Part NO.: C10 - 35- 2.5 制 表 ： WriteBy：庄杰彬 日 期： IssuedDate: 2021 - 10-08 客 户: 工程R& D Dept 采购Business Dept 承认 Approved By 一线通 研发R& D Dept 工程 Engineer Dept 审核 Approval 庄彩虹 庄杰彬 庄杰彬 Product Specification A. ElectricalCharacteristics Frequency 2400MHz ~2500MHz VSWR<3.0 Efficiency >30% Impedance 50 Ohm Polarization Line Gain 0DBi B. Material & MechanicalCharacteristics Material of Radiator Cu Cable Type 1.0 19 P 红 Connector Type : NO Dimension C. Environmental Operation Temperature - 30 °C ~ + 80 ° CStorage Temperature - 30 ° C~+ 85 °C Test Equipment & Conditions 1. NetworkAnalyzers: Agilent 8753D 5071C 2. Communications TestSet: Agilent E5525C 3. 3D Chamber TestSystem Effiency& Gain Radiation Pattern:

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202407-0182-43 Page: 1 of 72 FCC ID: 2A8ZB-G129 TB-RF-074-1.0 RF Test Data for Bluetooth (Conducted Measurements) General Description of EUT Product Name: SMART WATCH Test Model: G129 Sample ID: HC-C-202407-0182-02-01 Environmental Conditions Temperature: 25.6°C Relative Humidity: 52.6% Test Voltage: DC 3.7V Test Engineer: Jolin Lee Note: For a more detailed features description, please refer to the report TBR-C-202407-0182-43 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202407-0182-43 Page: 2 of 72 FCC ID: 2A8ZB-G129 TB-RF-074-1.0 Contents 1. Duty Cycle ........................................................................................................................................................................................... 3 2. Maximum Conducted Output Power ................................................................................................................................................. 9 3. -20dB Bandwidth .............................................................................................................................................................................. 18 4. Occupied Channel Bandwidth ......................................................................................................................................................... 24 5. Band Edge ........................................................................................................................................................................................ 30 6. Band Edge(Hopping) ........................................................................................................................................................................ 37 7. Conducted RF Spurious Emission .................................................................................................................................................. 44 8. Restrict Band .................................................................................................................................................................................... 54 9. Carrier Frequencies Separation....................................................................................................................................................... 61 10. Number of Hopping Channel ......................................................................................................................................................... 64 11. Dwell Time ....................................................................................................................................................................................... 67 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202407-0182-43 Page: 3 of 72 FCC ID: 2A8ZB-G129 TB-RF-074-1.0 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT 1-DH1 2402 Ant1 30.4 5.17 2.63 NVNT 1-DH1 2441 Ant1 30.4 5.17 2.63 NVNT 1-DH1 2480 Ant1 30.4 5.17 2.63 NVNT 2-DH1 2402 Ant1 31.2 5.06 2.56 NVNT 2-DH1 2441 Ant1 32 4.95 2.5 NVNT 2-DH1 2480 Ant1 32 4.95 2.5 NVNT 3-DH1 2402 Ant1 31.2 5.06 2.56 NVNT 3-DH1 2441 Ant1 31.2 5.06 2.56 NVNT 3-DH1 2480 Ant1 32 4.95 2.5 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202407-0182-43 Page: 4 of 72 FCC ID: 2A8ZB-G129 TB-RF-074-1.0 Test Graphs Duty Cycle NVNT 1-DH1 2402MHz Ant1 Duty Cycle NVNT 1-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202407-0182-43 Page: 5 of 72 FCC ID: 2A8ZB-G129 TB-RF-074-1.0 Duty Cycle NVNT 1-DH1 2480MHz Ant1 Duty Cycle NVNT 2-DH1 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202407-0182-43 Page: 6 of 72 FCC ID: 2A8ZB-G129 TB-RF-074-1.0 Duty Cycle NVNT 2-DH1 2441MHz Ant1 Duty Cycle NVNT 2-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202407-0182-43 Page: 7 of 72 FCC ID: 2A8ZB-G129 TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2402MHz Ant1 Duty Cycle NVNT 3-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202407-0182-43 Page: 8 of 72 FCC ID: 2A8ZB-G129 TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202407-0182-43 Page: 9 of 72 FCC ID: 2A8ZB-G129 TB-RF-074-1.0 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Total Power (dBm) Limit (dBm) Verdict NVNT 1-DH1 2402 Ant1 5.46 21 Pass NVNT 1-DH1 2441 Ant1 5.619 21 Pass NVNT 1-DH1 2480 Ant1 5.414 21 Pass NVNT 1-DH3 2441 Ant1 5.888 21 Pass NVNT 1-DH5 2441 Ant1 5.846 21 Pass NVNT 2-DH1 2402 Ant1 6.444 21 Pass NVNT 2-DH1 2441 Ant1 6.175 21 Pass NVNT 2-DH1 2480 Ant1 5.83 21 Pass NVNT 2-DH3 2441 Ant1 6.212 21 Pass NVNT 2-DH5 2441 Ant1 6.208 …

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202407-0182-43 Page: 1 of 43 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID: 2A8ZB-G129 Report No. : TBR-C-202407-0182-43 Applicant : Shenzhen Weiwo Intelligent Electronics Co.. Ltd Equipment Under Test (EUT) EUT Name : SMART WATCH Model No. : G129 Series Model No. : N/A Brand Name : N/A Sample ID : HC-C-202407-0182-01-01&HC-C-202407-0182-02-01 Receipt Date : 2024-08-08 Test Date : 2024-08-08 to 2024-08-20 Issue Date : 2024-08-20 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Test By : Jolin Lee Reviewed By : Henry Huang Approved By : Ivan Su This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202407-0182-43 Page: 2 of 43 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................ 2 1. GENERAL INFORMATION ABOUT EUT ............................................................................. 5 1.1 Client Information ................................................................................................................ 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 6 1.4 Description of Support Units .............................................................................................. 7 1.5 Description of Test Mode ................................................................................................... 7 1.6 Description of Test Software Setting ................................................................................ 8 1.7 Measurement Uncertainty .................................................................................................. 8 1.8 Test Facility........................................................................................................................... 9 2. TEST SUMMARY..................................................................................................................... 10 3. TEST SOFTWARE .................................................................................................................. 10 4. TEST EQUIPMENT AND TEST SITE .................................................................................. 11 5. CONDUCTED EMISSION ...................................................................................................... 12 5.1 Test Standard and Limit ................................................................................................... 12 5.2 Test Setup........................................................................................................................... 12 5.3 Test Procedure .................................................................................................................. 12 5.4 Deviation From Test Standard......................................................................................... 12 5.5 EUT Operating Mode ........................................................................................................ 13 5.6 Test Data............................................................................................................................. 13 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 14 6.1 Test Standard and Limit ................................................................................................... 14 6.2 Test Setup........................................................................................................................... 15 6.3 Test Procedure .................................................................................................................. 16 6.4 Deviation From Test Standard......................................................................................... 17 6.5 EUT Operating Mode ........................................................................................................ 17 6.6 Test Data............................................................................................................................. 17 7. RESTRICTED BANDS AND BAND EDGE REQUIREMENT .......................................... 18 7.1 Test Standard and Limit ................................................................................................... 18 7.2 Test Setup........................................................................................................................... 18 7.3 Test Procedure .................................................................................................................. 19 7.4 Deviation From Test Standard......................................................................................... 19 7.5 EUT Operating Mode ........................................................................................................ 19 7.6 Test Data............................................................................................................................. 19 8. 99% OCCUPIE…

Text truncated - open the document above for the full version.