2A929-718572Ball Tracker Module

16th June, 2025 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation Applicant: Sportable Technologies Ltd FCC ID: 2A929-718572 Model number/name: FIREFLY To whom it may concern This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of the above applicant for the above referenced FCC ID. U.S. Agent for service of process information: Sportable United States Inc FRN: 0037118700 Zackery Strock 16192 Coastal Highway, Lewes, Delaware 19958 [email protected] We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely yours, Name: Zackery Strock Job Title: Director of Customer Success US (Ref: UL International (UK) Ltd, ULID-018088 issue 3.0, FCC Agent Attestation letter template)

16th June, 2025 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: CFR 47 §2.911 (d)(7) Agent Designation Attestation Applicant: Sportable Technologies Ltd FCC ID: 2A929-718572 Model number/name: FIREFLY To whom it may concern The applicant as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. U.S. Agent for service of process information: Sportable United States Inc FRN: 0037118700 Zackery Strock 16192 Coastal Highway, Lewes, Delaware 19958 [email protected] The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. Sincerely yours, Signature Name: Gregory Blythe Job Title: Lead Compliance Engineer (Ref: UL International (UK) Ltd, ULID-018088 issue 3.0, FCC Applicant Attestation letter template)

16th June, 2025 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: CFR 47 §2.911 (d)(5) Attestation Applicant: Sportable Technologies Ltd FCC ID: 2A929-718572 Model number/name: FIREFLY To whom it may concern 1. The applicant certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. The applicant certifies that, the device does not have cybersecurity and / or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant anytime after certification. 3. The applicant certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Gregory Blythe Job Title: Lead Compliance Engineer (Ref: UL International (UK) Ltd, ULID-018088 issue 3)

16th June, 2025 Telecommunication Certification Body UL International (UK) Ltd Units 1-4, Horizon Wade Road, Kingsland Business Park Basingstoke, Hampshire RG24 8AH United Kingdom Subject: Authorisation Letter Applicant: Sportable Technologies Ltd FCC ID: 2A929-718572 Model number/name: FIREFLY To whom it may concern The applicant hereby authorises UL International (UK) Ltd. to act as the TCB for the above application to the FCC. The applicant certifies that they are not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. The applicant also acknowledges that the FCC operates a certification scheme that makes some documentation (information) accessible to the public in accordance with FCC KDB publication 726920 D01. This is information that is generally known to the public. Yours faithfully, Gregory Blythe Lead Compliance Engineer (Ref: UL International (UK) Ltd ULID-006026 issue 4.0)

16th June, 2025 Telecommunication Certification Body UL International (UK) Ltd Units 1-4, Horizon Wade Road, Kingsland Business Park Basingstoke, Hampshire RG24 8AH United Kingdom Subject: Permanent Confidentiality Request Applicant: Sportable Technologies Ltd FCC ID: 2A929-718572 Model number/name: FIREFLY To whom it may concern Pursuant to Sections 0.457(d) and 0.459 of CFR 47, the applicant requests that the following information, provided to support the FCC application for the above device be held permanently confidential: Schematics Block Diagram Operational Description The above material contains trade secrets not customarily released to public that are judged to have the potential to cause detriment to the applicant and provide unjustified benefits to its competitors. This information should not be available for public disclosure for an indefinite period of time. Yours faithfully, Gregory Blythe Lead Compliance Engineer (Ref: UL InternaƟonal (UK) Ltd, ULID-006027 issue 3.0)

16th June, 2025 Telecommunication Certification Body UL International (UK) Ltd Units 1-4, Horizon Wade Road, Kingsland Business Park Basingstoke, Hampshire RG24 8AH United Kingdom Subject: Short-Term Confidentiality (STC) Request Applicant: Sportable Technologies Ltd FCC ID: 2A929-718572 Model number/name: FIREFLY STC date: 180 Days To whom it may concern In accordance with §0.457 and §0.459 of CFR 47, the applicant requests the short-term confidentiality of the items listed below until the above STC date for the above device.  External Photos  Internal Photos  Test Set Up Photos  User Guide These items contain proprietary information related to the design of the product which has not yet been released to the market. The public disclosure of this information prior to public launch may be harmful to our company and provide unjust benefits to its competitors. The above period is requested to protect this information before formal market launch. If the launch date is re-scheduled to be earlier than the date stated above, the applicant will inform you to cancel this restriction. Please contact the undersigned if there are any further questions or additional information needed in this matter. Yours faithfully, Gregory Blythe Lead Compliance Engineer (Ref: UL InternaƟonal (UK) Ltd, ULID-006028 issue 3.0)

16th June, 2025 Telecommunication Certification Body UL International (UK) Ltd Units 1-4, Horizon Wade Road, Kingsland Business Park Basingstoke, Hampshire RG24 8AH United Kingdom Subject: FCC Single-Modular Transmitter Approval Letter Applicant: Sportable Technologies Ltd FCC ID: 2A929-718572 Model number/name: FIREFLY To whom it may concern The applicant hereby declares that the above product has met the single-modular transmitter approval requirements of FCC rule part §15.212(a)(1) and this is shown in the table below. Requirement Compliance: Yes or No along with a justification The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly Yes A shield can with lid is fitted to the top side of the PCB. Copper ground layers of the PCB form the bottom layer. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal Yes The FIREFLY module does not have external modulation or data inputs. The module must contain power supply regulation on the module Yes The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) Yes A PCB mounted chip antenna is used. The module must demonstrate compliance in a stand-alone configuration Yes The module must be labelled with its permanently affixed FCC ID label, or use an Yes electronic display (See KDB Publication 784748 about labelling requirements) The module must comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee Yes The module must comply with RF exposure requirements Yes Yours faithfully, Signature Name: Gregory Blythe Job Title: Lead Compliance Engineer (Ref: UL International (UK) Ltd, ULID-006031 issue #3.0 FCC Single-Modular Transmitter Approval Letter)

8th May, 2025 Telecommunication Certification Body UL International (UK) Ltd Units 1-3, Horizon Wade Road Kingsland Business Park Basingstoke Hampshire RG24 8AH United Kingdom To whom it may concern, Re: FCC TCB and ISED FCB Applications Please accept this letter as authorisation for Gregory Blythe to act as applicant on my behalf during the submission process for applications. Yours sincerely, James Neale Head of Hardware Sportable Technologies Ltd

( 3 : 1 ) 1 1 2 2 3 3 4 4 5 5 6 6 AA BB CC DD Drawn: Checked: Approved: NameDate Title: Part No:Prt. Rev:Mass: THIRD ANGLE PROJECTION Material:Finish: Scale: 5 : 1Sheet Size: A3Sheet: 1 OF 1 Drawing No: Drw. Rev: UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS. LINEAR TOLERANCES: .X ± 0.5mm, .XX ±0.1mm, .XXX ±0.05 ANGULAR TOLERANCES: ±1° SURFACE FINISH: 3.2μm Ra REMOVE ALL BURRS AND SHARP EDGES. This drawing and the information contained herein are the property of Sportable Ltd. © 2024. It is issued in strict confidence and shall not be reproduced, copied, used, or disclosed in whole or in part without the prior written consent of Sportable Ltd. FINCH PRODUCT LABEL G Blythe G Blythe 12/08/2025 12/08/2025 FINM1200 FIN-DRW-001 A A POLYESTERMATT 11/08/2025 J Foden Shroff 0.1 g REVISION HISTORY REVDESCRIPTIONDATEENGINEERAPPROVED AInitial release 12/08/25 J Foden Shroff G Blythe 1 1 , 0 20,0 R 2 , 0 0 REQUIREMENTS FOR PERMANENT ADHESIVE: •Min. service temp. range: -20~C to 80~C •Short-term high-temp. resistance: 110~C for 10 minutes •Good chemical resistance REQUIREMENTS FOR PRINTED ARTWORK: •Permanent print •Abrasion resistant •Chemical resistant VIEW IS FOR ILLUSTRATION ONLY. USE SEPARATELY SUPPLIED ARTWORK FILE FOR PRINTING. 0,3 MAX BLACK - C:0, M:0, Y:0, K:100 WHITE - C:0, M:0, Y:0, K:0 FIT LABEL HERE PHOTO FOR ILLUSTRATION ONLY. PROTOTYPE MODULE.

5th May, 2025 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: RF Exposure Exemption Applicant: Sportable Technologies Ltd FCC ID: 2A929-718572 Model number/name: FIREFLY To whom it may concern, In accordance with 47 CFR 1.1307 (b)(3)(i)(A), Sportable Technologies Ltd declare that the above product is exempt from RF exposure evaluation for the following reason: The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. FIREFLY transmits at extremely low average power of -43.9 dBm at a frequency of 6555.0 MHz. Yours sincerely, Signature Name: Gregory Blythe Job Title: Lead Compliance Engineer (Ref: UL International (UK) Ltd, ULID-018088 issue 3)

Justification for no antenna gain information FCC ID: 2A929-718572 As the antennas connected to the 6489.6 MHz transmitter are integral and the output power is measured as an EIRP, antenna gain information is, therefore, not required. Only radiated measurements are used to show compliance with the FCC limits for fundamental and spurious emissions.

UL International (UK) LTD Unit 1-4 Horizon, Kingsland Business Park, Wade Road, Basingstoke, Hampshire, RG24 8AH, UK Telephone: +44 (0)1256 312000 TEST REPORT Test Report No. : UL-RPT-RP15796127-316A Customer* : Sportable Technologies Ltd Model No.* : FIFM0001 FCC ID* : 2A929-718572 Technology : Wideband Test Standard(s) : FCC Parts 15.207,15.209(a) & 15.250 Test Laboratory : UL International (UK) Ltd, Basingstoke, Hampshire, RG24 8AH, United Kingdom 1. This test report shall not be reproduced except in full, without the written approval of UL International (UK) Ltd. 2. The results in this report apply only to the sample(s) tested. 3. The sample tested is in compliance with the above standard(s). 4. The test results in this report are traceable to the national or international standards. 5. All information marked with (*) was provided by the Customer, Applicant or Authorised representative 6. Version 2.0 supersedes all previous versions. Date of Issue: 05 September 2025 Checked by: Sarah Williams Staff Engineer, Radio Laboratory Company Signatory: Ben Mercer Lead Test Engineer, Radio Laboratory TEST REPORT SERIAL NO: UL-RPT-RP15796127-316A VERSION 2.0 ISSUE DATE: 05 SEPTEMBER 2025 Page 2 of 32 Customer Information Company Name*: Sportable Technologies Ltd Address*: Unit C, The Cube Building, 17-21 Wenlock Road, London N1 7GT United Kingdom Report Revision History Version Number Issue Date Revision Details Revised By 1.0 20/06/2025 Initial Version Sarah Williams 2.0 05/09/2025 Implemented TCB feedback Ben Mercer TEST REPORT SERIAL NO: UL-RPT-RP15796127-316A VERSION 2.0 ISSUE DATE: 05 SEPTEMBER 2025 Page 3 of 32 Table of Contents Customer Information.................................................................................................................... 2 Report Revision History ................................................................................................................ 2 Table of Contents ........................................................................................................................... 3 1 Attestation of Test Results ......................................................................................................... 4 1.1 Description of EUT 4 1.2 General Information 4 1.3 Summary of Test Results 4 1.4 Deviations from the Test Specification 4 2 Summary of Testing.................................................................................................................... 5 2.1 Facilities and Accreditation 5 2.2 Methods and Procedures 5 2.3 Calibration and Uncertainty 6 2.4 Test and Measurement Equipment 7 3 Equipment Under Test (EUT) ..................................................................................................... 9 3.1 Identification of Equipment Under Test (EUT) 9 3.2 Modifications Incorporated in the EUT 9 3.3 Additional Information Related to Testing 10 3.4 Description of Available Antennas 10 3.5 Description of Test Setup 10 4 Antenna Port Test Results ........................................................................................................15 4.1 Transmitter Frequency Stability (Temperature Variation) 15 4.2 Transmitter Frequency Stability (Voltage Variation) 16 5 Radiated Test Results ................................................................................................................17 5.1 Transmitter -10 dB Bandwidth 17 5.2 Transmitter Emission Average Level 19 5.3 Transmitter Emission Peak Level 20 5.4 Transmitter Radiated Emissions Below 960 MHz 21 5.5 Transmitter Radiated Emissions Above 960 MHz 23 6 AC Power Line Conducted Emissions Test Results ................................................................27 6.1 Transmitter AC Conducted Spurious Emissions 27 Appendix 1 ....................................................................................................................................32 TEST REPORT SERIAL NO: UL-RPT-RP15796127-316A VERSION 2.0 ISSUE DATE: 05 SEPTEMBER 2025 Page 4 of 32 1 Attestation of Test Results 1.1 Description of EUT The equipment under test (EUT) was a standalone, battery‐powered UWB radio tracker designed for real‐time ball location monitoring in professional sports.* 1.2 General Information Specification Reference: 47CFR15.250 Specification Title: Code of Federal Regulations Volume 47 (Telecommunication): Part 15 Subpart C (Intentional Radiators) – Section 15.250 Specification Reference: 47CFR15.207 and 47CFR15.209 Specification Title: Code of Federal Re1gulations Volume 47 (Telecommunication): Part 15 Subpart C (Intentional Radiators) – Sections 15.207 and 15.209 Site Registration: 685609 FCC Lab. Designation No.: UK2011 Location of Testing: Units 3 & 4 Horizon, Wade Road, Kingsland Business Park, Basingstoke, Hampshire, RG24 8AH, United Kingdom Test Dates: 27 May 2025 to 06 June 2025 1.3 Summary of Test Results FCC Reference (47CFR) Measurement Result Part 15.250(a) Transmitter Frequency Stability Part 15.250(a) & (b) Transmitter -10 dB Bandwidth Part 15.250(d)(1) Transmitter Emission Average Level Part 15.250(d)(3) Transmitter Emission Peak Level Parts 15.250(d)(4) & 15.209(a) Transmitter Radiated Emissions Below 960 MHz Part 15.250(d)(1) & (2) Transmitter Radiated Emissions Above 960 MHz Part 15.207 Transmitter AC Conducted Emissions Key to Results = Complied = Did not comply 1.4 Deviations from the Test Specification For the measurements contained within this test report, there were no deviations from, additions to, or exclusions from the test specification identified above. TEST REPORT SERIAL NO: UL-RPT-RP15796127-316A VERSION 2.0 ISSUE DATE: 05 SEPTEMBER 2025 Page 5 of 32 2 Summary of Testing 2.1 Facilities and Accreditation The test site and measurement facilities used to collect data are located at Units 3 & 4 Horizon, Wade Road, Kingsland Business Park, Basingstoke, Hampshire, RG24 8AH, United Kingdom. The following table identifies which facilities were utilised for radiated emission measurements documented in this…

Text truncated - open the document above for the full version.