2A92I-AST-WR410WIRELESS POWER BANK

8053-30 High Sierra 5000 mAh MagStand Instruction Manual Whats Included: 1 x 5000mAh Magclick Wireless Power Bank 1 x 30cm TPE Type-C to Type-C Charging Cable • • WIRELESS POWER BANK Functions: Instructions: Tech Specifications: Lanyard Hang Hole Type-C Input/Output Port Power Button Magnetic Wireless Charging Surface Built-in Powerbank Stand LED Indicators Charging the Power Bank: Be sure the power bank is fully charged before usage. Insert the type-C tip of the included cable into a certified AC adapter and the other end into the Type-C Input port(2) to begin charging. The LED indicator(6) will flash WHITE when the device is charging and will stop once fully charged. When the power bank is fast charging there will be a GREEN indicator. Once the power bank is fully charged, remove the device from the power source. Cable Charging Your Mobile Device: Press the ON/OFF button(3) to turn ON the power bank, then connect your device to the Type-C port(2) using the appropriate cable. Charging will begin automatically. LED indicators will glow WHITE while charging, and the green LED will appear when fast charging is active. The indicators will turn off once the power bank is depleted. The power bank will automatically shut off after 32 seconds of inactivity, or you can press the ON/OFF button twice to turn it OFF manually. Disconnect your device once it is fully charged. Wireless Charging Devices: Place your wireless charging device on the wireless charging surface(4). The device will begin to charging immediately and the wireless charging LED will glow BLUE, and the green LED will appear when fast charging is active. Once fully charged, remove the device. If your phone/device supports fast charging, the LED will glow BLUE & GREEN at the same time when wireless charging. Wireless Charging with Magnetic Surface: If your phone supports MagSafe, it will securely align with the magnetic charging surface(4). The magnetic surface is compatible with other devices, but the magnetic alignment feature will only work with MagSafe-type phones. Note: When wireless charging, if the LED indicator is flashing BLUE the device is either NOT a wireless charging device or there is an object between the device and charging surface interfering with the charging process. Built-in Powerbank Stand(5): Fold out the built-in stand on the back of the power bank to prop it up on a flat surface. Capacity: 5000mAh/3.85V/19.25Wh Type-C Input: DC 5V/3A, 9V/2A, 12V/1.5A (18W Max.) Type-C Output: DC 5V/3A, 9V/2.22A, 12V/1.67A (20W Max.) Wireless Output for Phone: 15W Max 1. 2. 3. 4. 5. 6. 1. • • • ** • 2. • • • • • 3. • • • ** 4. • • ** 5. • 1. 2. 3. 4. 231 5 4 6 FCC Statement: Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. 1. 2. Name of the Distributor: Leedsworld Inc Address of the Distributor: 400 Hunt Valley Road, New Kensington, PA 15068 USA. FCC ID: 2A92I-AST-WR410 Model AST-WR410 Made in China IC Statement: This device contains licence-exempt transmitter (s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) L’ appareil ne doit pas produire de brouillage; (2) L’ appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’ en compromettre le fonctionnement. Radio Frequency Exposure Statement for IC This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 10cm between the radiator & body. Cet équipement est conforme aux limites d’exposition IC définies pour un environment non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 10cm entre le radiateur et la carrosserie. CAN ICES-3 (B) / NMB-3 (B) This Class B digital apparatus complies with Canadian ICES-003. (Cet appareil numérique de la Classe B conforme à la norme NMB-003 du Canada). CAN ICES-3 (B) / NMB-3(B) This Class B digital apparatus complies with Canadian ICES-003. (Cet appareil numérique de la Classe B conforme à la norme NMB-003 du Canada). • Safety Precautions: WARNING-When using this prod…

Text truncated - open the document above for the full version.

Rev 1/26/2023 NINGBO ALLSTAR IMPORT&EXPORT CO.,LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-06-11 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID:2A92I-AST-WR410 NINGBO ALLSTAR IMPORT&EXPORT CO.,LTD certifies that the equipment for which authorization is sought is not“covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. NINGBO ALLSTAR IMPORT&EXPORT CO.,LTD certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Carrie Jin) Rev 1/26/2023 NINGBO ALLSTAR IMPORT&EXPORT CO.,LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-06-11 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID:2A92I-AST-WR410 NINGBO ALLSTAR IMPORT&EXPORT CO.,LTD certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Carrie Jin)

NINGBO ALLSTAR IMPORT&EXPORT CO.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 11, 2026 Subject; Request for Confidentiality FCC ID:2A92I-AST-WR410 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description FCC Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Carrie Jin Title: Sales Manager

NINGBO ALLSTAR IMPORT&EXPORT CO.,LTD Product Similarity Declaration Product name: WIRELESS POWER BANK Model name: 8053-30BK, 8053-30,AST-WR410 FCC ID: 2A92I-AST-WR410 We (NINGBO ALLSTAR IMPORT&EXPORT CO.,LTD) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name and colar. Sincerely yours, Applicant Signature Printed Name: Carrie Jin Title: Sales Manager Address: 14-3-8, TIANHONG BUILDING, NO.1 SHUNYE STREET, LUOTUO STREET, ZHENHAI DISTRICT,NINGBO, China Tel.: 0574-86307000 Email: [email protected]

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 NINGBO ALLSTAR IMPORT&EXPORT CO.,LTD Date：2026-06-15 Product Model Number: 8053-30BK, 8053-30, AST-WR410 FCC ID:2A92I-AST-WR410 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out byQAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Carrie Jin Contact Listed on FCC Wesbite Title: Sales Manager Email: [email protected] On behalf of: NINGBO ALLSTAR IMPORT&EXPORT CO.,LTD

Page 1 of 4 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China FCC ID:2A92I-AST-WR410 External Photos Label&location Page 2 of 4 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Page 3 of 4 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Page 4 of 4 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China

FCC ID LABELING AND LOCATION FCC ID Label size: 45.2x26MM FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Page 1 of 3 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China FCC ID:2A92I-AST-WR410 Internal Photos Page 2 of 3 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Page 3 of 3 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Coil ANT

SZNTT-TR832-0 Tel:0755-27889935 Web:http://www.ntt-testing.com Page 1 of 18 Shenzhen NTT Testing Technology Co.,Ltd. Report No.:SZNTT26022791E1-2 MPE REPORT WIRELESS POWER BANK MODEL No.:8053-30BK FCC ID:2A92I-AST-WR410 REPORT NO.:SZNTT26022791E1-2 ISSUE DATE:Jun. 06, 2026 Prepared for NINGBO ALLSTAR IMPORT&EXPORT CO.,LTD 14-3-8, TIANHONG BUILDING, NO.1 SHUNYE STREET, LUOTUO STREET, ZHENHAI DISTRICT,NINGBO, China Prepared by Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China SZNTT-TR832-0 Tel:0755-27889935 Web:http://www.ntt-testing.com Page 2 of 18 Shenzhen NTT Testing Technology Co.,Ltd. Report No.:SZNTT26022791E1-2 TABLE OF CONTENT Test Report Description Page 1. SUMMARY OF TEST RESULT ........................................................................................................ 4 2. GENERAL INFORMATION ............................................................................................................... 5 2.1. DESCRIPTION OF DEVICE (EUT) .................................................................................................................................... 5 2.2. TEST SETUP.................................................................................................................................................................... 5 2.3. DESCRIPTION OF TEST FACILITY .................................................................................................................................... 7 2.4. MEASUREMENT UNCERTAINTY ....................................................................................................................................... 7 3. MEASURING DEVICE AND TEST EQUIPMENT ......................................................................... 8 3.1. FOR MPE MEASUREMENT ............................................................................................................................................. 8 4. RF EXPOSURE ................................................................................................................................... 9 4.1. MEASURING STANDARD ................................................................................................................................................. 9 4.2. REQUIMENTS .................................................................................................................................................................. 9 4.3. TEST CONFIGURATION .................................................................................................................................................. 10 4.4. LIMITS ........................................................................................................................................................................... 11 4.5. TEST MODES: ............................................................................................................................................................... 12 4.6. DESCRIPTION OF SUPPORT UNIT ................................................................................................................................. 12 4.7. MEASURING RESULTS .................................................................................................................................................. 12 5. PHOTOGRAPHS OF TEST SETUP .............................................................................................. 18          !" # $        %  & $'$           !"#$#%   & '   ! &' (  ''  )& &     * +, +    &  (   !- &' .  '' )& &   * ' /  /  0 1 2 %34$#$30 25 6       7  !8!!$!39   :8:!3-$9 0 ;%3!3; 3! / 1<  , =3" * =  > >1=    >? *@*   A *11A? 1  1  2 * 2B2+2 2 1 = 2 A ,12 * =  * = = 1, * =  +   ,12  1 * 2 +2  +  1   *  1  *@*   A *11A? 1    +2 ,+ 1,  1 > ? ,1 * +?  12  1, *  2 +2   1 * 1 *1< * * ' 8C+2 '  9  *? 12 < * * 7 C+2  * 1  1 >1=   2 1?  * 1 > 1+   < *1+ <  1= 1, *@*   A *11A? 1   >?8 A9 )*1  =<8+= 19 0 /+ 1=8A9 > (+ SZNTT-TR832-0 Tel:0755-27889935 Web:http://www.ntt-testing.com Page 4 of 18 Shenzhen NTT Testing Technology Co.,Ltd. Report No.:SZNTT26022791E1-2 1. SUMMARY OF TEST RESULT EMISSION Description of Test Item Standard & Limits Results MPE FCC Part 1(1.1310) and Part 2(2.1093) KDB 680106 D01 Wireless Power Transfer v04 Pass Note: N/A is an abbreviation for Not Applicable. SZNTT-TR832-0 Tel:0755-27889935 Web:http://www.ntt-testing.com Page 5 of 18 Shenzhen NTT Testing Technology Co.,Ltd. Report No.:SZNTT26022791E1-2 2. GENERAL INFORMATION 2.1. Description of Device (EUT) EUT : WIRELESS POWER BANK Model Number : 8053-30BK, 8053-30/AST-WR410 Different : / Model different Only difference is the model name and color. Power Rating : Input: Type-C: DC 5V/3A,9V/2A,12V/1.5A(18W max.) Output: Type-C: DC 5V/3A,9V/2.22A,12V/1.67A (20W max.) Wireless: 15W Battery Capacity: 5000mAh/3.85V/19.25Wh Operation Frequency for WPT : 111-205 KHz Modulation : MSK Antenna Type: : Coil Antenna Date of Received : Mar. 21, 2026 Date of Test : Mar. 21, 2026 to Jun. 06, 2026 2.2. Test Setup For mobile exposure conditions: SZNTT-TR832-0 Tel:0755-27…

Text truncated - open the document above for the full version.

SPECIFICATION FOR APPROVAL 1.MECHANICAL DIMENSION (UNIT:mm) 2.SCHEMATICS: ABC D2EHF 41.5±1.020.5±0.50.6±0.0510±34±22.2Max5.3±0.05 3.WINDING： STEPSTART-FINISHWIRE TYPETURNSTAPE REMAR K N1S-F⌀0.08*24mm 2UEW10TS (Ref)

Test Report Tel:0755-27889935 Web:http://www.ntt-testing.com Page 1 of 24 Shenzhen NTT Testing Technology Co.,Ltd. Report No.:SZNTT26022791E1-1 FCC PART 15 SUBPART C WIRELESS POWER BANK MODEL No.:8053-30BK FCC ID:2A92I-AST-WR410 REPORT NO.:SZNTT26022791E1-1 ISSUE DATE:Jun. 06, 2026 Prepared for NINGBO ALLSTAR IMPORT&EXPORT CO.,LTD 14-3-8, TIANHONG BUILDING, NO.1 SHUNYE STREET, LUOTUO STREET, ZHENHAI DISTRICT,NINGBO, China Prepared by Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Test Report Tel:0755-27889935 Web:http://www.ntt-testing.com Page 2 of 24 Shenzhen NTT Testing Technology Co.,Ltd. Report No.:SZNTT26022791E1-1 TABLE OF CONTENT Test Report Description Page 1. SUMMARY OF TEST RESULTS .......................................................................................................................... 5 2. GENERAL INFORMATION .................................................................................................................................. 6 2.1. Description of Device (EUT) ........................................................................................................................... 6 2.2. Description of Support Units ........................................................................................................................... 6 2.3. Independent Operation Modes ....................................................................................................................... 7 2.4. Test Mode ....................................................................................................................................................... 7 2.5. Description of Test Facility .............................................................................................................................. 8 2.6. Measurement Uncertainty............................................................................................................................... 8 3. MEASURING DEVICE AND TEST EQUIPMENT ................................................................................................ 9 4. 20DB BANDWIDTH ............................................................................................................................................ 11 4.1. Test Procedure ............................................................................................................................................... 11 4.2. Test Setup ...................................................................................................................................................... 11 4.3. Test Results ................................................................................................................................................... 11 5. POWER LINE CONDUCTED EMISSION MEASUREMENT ............................................................................. 13 5.1. Block Diagram of Test Setup ........................................................................................................................ 13 5.2. Limits ............................................................................................................................................................. 13 5.3. Test Procedure .............................................................................................................................................. 13 5.4. Measuring Results ........................................................................................................................................ 14 6. RADIATED EMISSION TEST ............................................................................................................................. 17 6.1. Measurement Procedure .............................................................................................................................. 17 6.2. Test SET-UP (Block Diagram of Configuration) ............................................................................................ 17 6.3. Radiated Emission Limit ............................................................................................................................... 18 6.4. Measurement Result..................................................................................................................................... 20 7. TEST PHOTOGRAPHS AND EUT PHOTOGRAPHS ....................................................................................... 24          ! " #$ %   & '()*  % #+%,  -.--           !"#$#%   & '   ! &' (  ''  )& &     * +, +    &  (   !- &' .  '' )& &   * ' /  /  0 1 2 %34$#$30 25 6  +2 1+ '        ' 7 "8 7  !4 +9   * 91: ;+2 <   9= *>*   ? *11?= 1 *      :+ 1  1+   ;+2 1,?+ 1 *1<  * 1 < 2  1 < * * 1+ ?:    @$!3#A3A3B1 !BA3A$  * ?= 2  9= * 2 '     9  * 1   12 < * 1+     2 1 2 1, 7 +  !4 *   + 1, * 1   1= 1 *   2  ,  * 1   9=C ?D )*1  :<C+: 1D 0 /+ 1:C?D 9 (+ Test Report Tel:0755-27889935 Web:http://www.ntt-testing.com Page 4 of 24 Shenzhen NTT Testing Technology Co.,Ltd. Report No.:SZNTT26022791E1-1 Modified Information Version Report No. Revision Data Summary Ver.1.0 SZNTT26022791E1-1 Jun. 06, 2026 Original Version …

Text truncated - open the document above for the full version.

Page 1 of 2 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China FCC ID:2A92I-AST-WR410 Test Photo Page 2 of 2 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China