2A939-W01Wireless charging bracket

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Page 1 of 4 FCC ID: 2A939-W01 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. EUT Constructional Details External EUT Photo Photo 1 Photo 2 Page 2 of 4 FCC ID: 2A939-W01 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 3 Photo 4 Page 3 of 4 FCC ID: 2A939-W01 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 5 Photo 6 Page 4 of 4 FCC ID: 2A939-W01 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 7 Photo 8 ------End------

Label &Label location FCC ID: 2A939-W01

Page 1 of 5 FCC ID: 2A939-W01 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. EUT Constructional Details Internal EUT Photo Photo 1 Photo 2 Page 2 of 5 FCC ID: 2A939-W01 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 3 Photo 4 Page 3 of 5 FCC ID: 2A939-W01 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 5 Photo 6 Page 4 of 5 FCC ID: 2A939-W01 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 7 Photo 8 Page 5 of 5 FCC ID: 2A939-W01 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 9 ------End------ Antenna

Page 1 of 13 Report No.: AIT23010909W2 FCC TEST REPORT Client Information: Applicant: Guangzhou Wenzhong Technology Co., Ltd Applicant add.: Room 101, Building 11, No. 728, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou Manufacturer: Guangzhou Wenzhong Technology Co., Ltd Manufacturer add.: Room 101, Building 11, No. 728, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou Product Information: Product Name: Wireless charging bracket Model No.: W01 Brand Name: N/A FCC ID: 2A939-W01 Applicable standards : FCC Rules and Regulations part 2.1091 KDB680106 D01v03 Prepared By: Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang,Dongguan, Guangdong, China Tel.: +86-769-8202 0499 Fax.: +86-769-8202 0495 Date of Receipt: Jan. 09, 2023 Date of Test: Jan. 09~ Jan. 12, 2023 Date of Issue: Jan. 13, 2023 Test Result: Pass This device described above has been tested by Dongguan Yaxu (AiT) Technology Limited and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Note: This report shall not be reproduced except in full, without the written approval of Dongguan Yaxu (AiT) Technology Limited, this document may be altered or revised by Dongguan Yaxu (AiT) Technology Limited, personal only, and shall be noted in the revision of the document. This test report must not be used by the client to claim product endorsement. Reviewed by: Approved by: Simba Huang Seal.chen Page 2 of 13 Report No.: AIT23010909W2 Contents 1 TEST FACILITY ................................................................................... 3 1.1 Deviation from standard .............................................................................................................................. 3 1.2 Abnormalities from standard conditions ................................................................................................... 3 1.3 Test Location ................................................................................................................................................ 3 1.4 Environmental conditions ........................................................................................................................... 3 2 GENERAL INFORMATION ......................................................................... 4 2.1 Product Description ..................................................................................................................................... 4 2.2 Description of the test mode ....................................................................................................................... 5 2.3 Special Accessories ..................................................................................................................................... 5 2.4 Summary of measurement results ............................................................................................................. 6 2.5 Statement of the measurement uncertainty .............................................................................................. 6 2.6 Equipments Used during the Test .............................................................................................................. 6 3 TEST CONDITIONS AND RESULTS ................................................................ 7 3.1 Applicable Standard ..................................................................................................................................... 7 3.2 Limit ............................................................................................................................................................... 7 3.3 Test Setup ..................................................................................................................................................... 8 3.4 Measurement Procedure .............................................................................................................................. 8 3.5 Test Result of E and H field Strength ......................................................................................................... 9 3.5.1 For portable exposure ................................................................................................................... 9 3.6 Conclusion .................................................................................................................................................. 10 4 TEST SETUP PHOTOS OF THE EUT ............................................................. 11 Page 3 of 13 Report No.: AIT23010909W2 1 Test Facility The test facility is recognized, certified or accredited by the following organizations: .CNAS- Registration No: L6177 Dongguan Yaxu (AiT) technology Limited is accredited to ISO/IEC 17025:2017 general Requirements for the competence of testing and calibration laboratories (CNAS-CL01 Accreditation Criteria for the competence of testing and calibration laboratories) on April 18, 2022 FCC-Registration No.: 703111 Designation Number: CN1313 Dongguan Yaxu (AiT) technology Limited has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. IC —Registration No.: 6819A CAB identifier: CN0122 The 3m Semi-anechoic chamber of Dongguan Yaxu (AiT) technology Limited has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 6819A A2LA-Lab Cert. No.: 6317.01 Dongguan Yaxu (AiT) technology Limited has been accredited by A2LA for technical competence in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. 1.1 Deviation from…

Text truncated - open the document above for the full version.

Page 1 of 23 Report No.: AIT23010909W1 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling Third Street, Jitigang, Huangjiang,Dongguan, Guangdong, China. FCC TEST REPORT Client Information: Applicant: Guangzhou Wenzhong Technology Co., Ltd Applicant add.: Room 101, Building 11, No. 728, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou Manufacturer: Guangzhou Wenzhong Technology Co., Ltd Manufacturer add.: Room 101, Building 11, No. 728, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou Product Information: Product Name: Wireless charging bracket Model No.: W01 Brand Name: N/A FCC ID: 2A939-W01 Applicable standards : FCC CFR Title 47 Part 15 Subpart C Prepared By: Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang,Dongguan, Guangdong, China Tel.: +86-769-8202 0499 Fax.: +86-769-8202 0495 Date of Receipt: Jan. 09, 2023 Date of Test: Jan. 09~ Jan. 12, 2023 Date of Issue: Jan. 13, 2023 Test Result: Pass This device described above has been tested by Dongguan Yaxu (AiT) Technology Limited and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Note: This report shall not be reproduced except in full, without the written approval of Dongguan Yaxu (AiT) Technology Limited, this document may be altered or revised by Dongguan Yaxu (AiT) Technology Limited, personal only, and shall be noted in the revision of the document. This test report must not be used by the client to claim product endorsement. Reviewed by: Approved by: Simba Huang Seal.chen Page 2 of 23 Report No.: AIT23010909W1 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling Third Street, Jitigang, Huangjiang,Dongguan, Guangdong, China. 1 Contents Page COVER PAGE 1 CONTENTS ........................................................................................................................................................... 2 2 TEST SUMMARY .................................................................................................................................................. 5 2.1 STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................................................................. 5 2.2 MEASUREMENT UNCERTAINTY ............................................................................................................................ 5 3 TEST FACILITY ..................................................................................................................................................... 6 3.1 DEVIATION FROM STANDARD ............................................................................................................................... 6 3.2 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................... 6 3.3 TEST LOCATION ................................................................................................................................................. 6 4 GENERAL INFORMATION ................................................................................................................................... 7 4.1 EUT TEST MODE ............................................................................................................................................... 8 1.1 DESCRIPTION OF TEST SETUP............................................................................................................................. 8 1.2 PERIPHERAL LIST ............................................................................................................................................... 9 1.3 EUT PERIPHERAL LIST ....................................................................................................................................... 9 2 EQUIPMENTS LIST FOR ALL TEST ITEMS ..................................................................................................... 10 3 CONDUCTED EMISSION TEST ......................................................................................................................... 11 3.1 CONDUCTED EMISSION MEASUREMENT ................................................................................................ 11 3.2 POWER LINE CONDUCTED EMISSION LIMITS ........................................................................................... 11 3.3 TEST PROCEDURE ...................................................................................................................................... 11 3.4 DEVIATION FROM TEST STANDARD ......................................................................................................... 11 3.5 TEST SETUP ................................................................................................................................................. 12 3.6 EUT OPERATING CONDITIONS .................................................................................................................. 12 3.7 TEST RESULT .................................................................................................................................................. 13 4 RADIATED EMISSION MEASUREMENT .......................................................................................................... 15 4.1 RADIATED EMISSION LIMITS .............................................................................................................................. 15 4.2 ANECHOIC CHAMBER TEST SETUP DIAGRAM ..................................................................................................... 16 4.3 TEST PROCEDURE ........................................................................................................................................... 16 4.4 DEVIATION FROM TEST STANDARD .....................................................................................................…

Text truncated - open the document above for the full version.

Guangzhou Wenzhong Technology Co., Ltd Room 101, Building 11, No. 728, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou 1. Antenna Description: Antenna type: loop coil Antenna Manufacturer: Guangzhou Wenzhong Technology Co., Ltd Model: W01 antenna Antenna Gain(Peak): 0 dBi Frequency range:110kHz-205kHz 2. Antenna Photo: Antennaφ=48mm Antennaφ=38mm Antennaφ=48mm Antennaφ=38mm

Page 1 of 2 FCC ID: 2A939-W01 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Test Setup Photo Radiated Emission Page 2 of 2 FCC ID: 2A939-W01 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Conducted Emission ------End------