2A95B-F11Temperature Control Coffee Mug

Product Instructions Temperature Control Travel Mug 1 二 勹 3 2 I.Mug 2.Base 3.Powerplug 0 The figure is for reference only, please refer to the real object Function introduction Choose 35-65 degrees Celsius to maintain a constant temperature 1. Can be placed on the base for charging while maintaining a constant temperature 2. Built-in battery, can be moved to maintain constant temperature *Only if the base is powered on using the included power plug can it work properly! Display • Display setting temperature during setting • Display real-timetemperafur during operation Touch button •Click Wake Up • Click Precise Selection • Longpresstoquicklyselect Wireless charging • Other wireless charging devices are available Standby charging Temperature Settings • Double click to display the power • Long press to turn off heating Isothermal model In this mode, you can set the desired temperature and maintain constant temperature by heating. Setting steps: 1. Click the touch button to wake up the temperature setting button. 2. Set the temperature, wait for 3s, and start working after the screen flashes for 3 times. 3. When the set temperature is reached, there is a vibration warning,And maintain constant temperature. During operation, the display screen is always on, showing the real-time temperature. *Long press the touch button to turn off the heating and switch to the sleep mode. Sleep mode In this mode, only the real-time temperature can be viewed. The heating is turned off and the constant temperature cannot be maintained. Click the touch control button to check the temperature, and the display screen does not stay on. You need to reset the temperature to enter the constant temperature mode. Warning必 • Built in electronic equipment, do not cook in water/ expose to the sun fora longtime. • Do not insert or unplug the plug with wet hands to avoid electric shock. • Do not move or shake the product during work. • Don't get close to the fire source, carry it out and make sure to tighten the cover. • Do not put baby products/dry ice/ carbonated drinks. • It is forbidden to use microwave ovens and other heating equipment to heat products. • It is forbidden to put it into the refrigerator to avoid short circuit caused by water vapor entering. • Do not use dishwashers, dish dryers and other machines to clean products. S tandard parameters Product Name: Temperature Control Travel Mug Product model: Fl Capacity: 355ml Specification: 83 * 18 4mm Ne t weight: 500g Charging voltage: 12V= Battery ca pacity:4000mAh Material Science: Liner: 18/8 stainless steel+ ceramic glaze Cover: Tritan + silicone Q uality standard: GB 4706.19-2008 GB 4706.1-2005 APP download APP Connect APP control APP control Harmful substances in the product 1.Android devices scan the QR code below to download the APP. 2.iOS devices search for "joozan" download in the APP Store. Connect to the APP, you can set and view the temperature in the APP; Set reminder times, etc. 1. 2. 3. Device List C 、 ＋ < Search L Sm.rtCoffeeMu9 0839过3S7BSO ｀ Device List十 Search for Mug Connect the Mug L @ Sma,t�g� Click to goto the Actions page Settings Electricity Temperature Fahrenheit and Celsius switch -Slide left and right to set the temperature ＜ Settings Rem1nder1 11: 49 - 尸 Reminder2 1554 - Reminder3 2157 - Reminder4 1400 - Reminders 1300 - DWceName Sm-'ln CcHee Mug) - MAC D8 39 38 35 68 58 De"''Model Fl F l「mwa「eVe「5,on V 6 H"d wa,eVe乃lOn',,C APPVerslOn •· 0 1 ti Remove Device > Set the reminder time Change the device name 匾匡＿＿ This table is prepared in accordance with sj/tll346-2014. 0: it means that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in gb/t26572. x: It means that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit specified in gb/t26572. 。 ＿ (Pb) (Cd) (Cr (VJ) (PBB) (PBDE) 。 。 。 。 。 X 。 。0 。 。0 。 。 。 The number in this logo indicates that the environmental protection service life of the product under normal use is 10 years. Some parts may also be marked with environmental protection service life. The environmental protection service life shall be subject to the number in the mark. Please refer to the actual sales configuration of the product. FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this dev ice must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in acc ordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the us er is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiv er is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitt…

Text truncated - open the document above for the full version.

ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. Address: Floor 5, Building A, No.5 Jiuzhou Avenue, Health Base, Torch Development Zone, Zhongshan City Product Name: Temperature Control Coffee Mug FCC ID: 2A95B-F11 Model(s): F1 2.911(d)(5)(i) Equipment Type We, [ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. ] certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Chongzeng Huang Date: Feb.22,2023 Title and Company name: Manager / ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. Address: Floor 5, Building A, No.5 Jiuzhou Avenue, Health Base, Torch Development Zone, Zhongshan City Product Name: Temperature Control Coffee Mug FCC ID: 2A95B-F11 Model(s): F1 2.911(d)(5)(ii) Applicant filing We, [ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. ] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Chongzeng Huang Date: Feb.22,2023 Title and Company name: Manager / ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. Address: Floor 5, Building A, No.5 Jiuzhou Avenue, Health Base, Torch Development Zone, Zhongshan City Product Name: Temperature Control Coffee Mug FCC ID: 2A95B-F11 Model(s): F1 2.911(d)(7) USA Designated Agent for Service of Process We, [ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD.] designate [Electronic Mac, Inc. ] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Electronic Mac, Inc. Address: 6525 Crown Blvd, # 20805, San Jose, CA 95120 FRN:0033414541 Contact Name: Ray Sia Telephone No: 408-332-2399 Email: [email protected] Applicant Company name: ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. Address: Floor 5, Building A, No.5 Jiuzhou Avenue, Health Base, Torch Development Zone, Zhongshan City FCC Grantee Code: 2A95B Contact Name: Chongzeng Huang Telephone No: 18900831218 Email: [email protected] ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. 2.911 (d)(7)USA Agent v1.2 Signature: Title: Manager Signature: Title: Manager Date: Feb.23,2023 Date: Feb.23,2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. Agent Authorization Company: ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. Address: Floor 5, Building A, No.5 Jiuzhou Avenue, Health Base, Torch Development Zone, Zhongshan City Product Name: Temperature Control Coffee Mug Model Number(s): F1 Product Description: Temperature Control Coffee Mug We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Feb.22,2023 Name: Chongzeng Huang Title: manager Company: ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD.

ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 23, 2023 Subject; Request for Confidentiality FCC ID: 2A95B-F11 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Chongzeng Huang Title: manager

- Page 1 of 4 - ET-23020059 Product Name: Temperature Control Coffee Mug Model No.: F1 Ext Photos - Page 2 of 4 - ET-23020059 - Page 3 of 4 - ET-23020059 - Page 4 of 4 - ET-23020059 -----END-----

1 / 1 Size:30mm*20mm

- Page 1 of 2 - ET-23020059 Product Name: Temperature Control Coffee Mug Model No.: F1 Internal photos - Page 2 of 2 - ET-23020059 ------END-----

R Report No.: ET-23020059E02 This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen ETR Standard Technology Co., Ltd TEST REPORT Applicant: ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. Address of Applicant: Floor 5, Building A, No.5 Jiuzhou Avenue, Health Base, Torch Development Zone, Zhongshan City Manufacturer/Factory: ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. Address of Manufacturer/Factory: Floor 5, Building A, No.5 Jiuzhou Avenue, Health Base, Torch Development Zone, Zhongshan City Product Name: Temperature Control Coffee Mug Model No.: F1 Trade Mark: N/A FCC ID: 2A95B-F11 Applicable standards: FCC CFR Title 47 Part 1.1310 Date of Test: Jan.06, 2023- Jan.29, 2023 Date of report issued: Feb.20, 2023 Test Result : PASS Remark: * In the configuration tested, the EUT complied with the standards specified above. The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver Prepared By Shenzhen ETR Standard Technology Co., Ltd. Address: No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Compiled by: Reviewed by: Approved by: Project Engineer Project Manager Authorized Signature - Page 2 of 12 - Report No.: ET-23020059E02 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Report Revision History Report No. Description Issue Date ET-23020059E02 Original Feb.20, 2023 - Page 3 of 12 - Report No.: ET-23020059E02 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Contents Page 1 TEST SUMMARY ......................................................................................................................................4 2 GENERAL INFORMATION .......................................................................................................................5 2.1 GENERAL DESCRIPTION OF EUT ..........................................................................................................5 2.2 TEST MODE .........................................................................................................................................6 2.3 DESCRIPTION OF SUPPORT UNITS ........................................................................................................6 2.4 DEVIATION FROM STANDARDS ..............................................................................................................6 2.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................6 2.6 TEST FACILITY.....................................................................................................................................6 2.7 TEST LOCATION...................................................................................................................................6 2.8 ADDITIONAL INSTRUCTIONS ..................................................................................................................6 3 TEST INSTRUMENTS LIST ......................................................................................................................7 4 MAXIMUM PERMISSIBLE EXPOSURE ...................................................................................................8 4.1 LIMIT ...................................................................................................................................................8 4.2 REQUIREMENTS ...................................................................................................................................8 4.3 MEASURE PROCEDURES ......................................................................................................................9 4.4 MEASURE SETUP .................................................................................................................................9 4.5 MEASUREMENT DATA ...........................................................................................................................9 5 TEST SETUP PHOTO .............................................................................................................................10 - Page 4 of 12 - Report No.: ET-23020059E02 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 1 Test Summary Test Item Section in CFR 47 Result Test by RF EXPOSURE KDB 680106 D01 RF Exposure Wireless Charging App v03r01 Pass Yvan Measurement Uncertainty Test Item Measurement Uncertainty Notes H-Field ±2.39dB (1) E-Field ±2.45dB (1) conducted RF Power ±0.65dB (1) temperature ±0.2°C (1) humidity ±1% (1) DC and low frequency voltages 0.06% Note (1): The measurement uncertainty is for coverage factor of k=2 and a level of confidence of 95%. - Page 5 of 12 - Report No.: ET-23020059E02 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 2 General Information 2.1 General Description of EUT Product Name: Temperature Control Coffee Mug Model No.: F1 Sample(s) Status: Engineer sample Hardware Version: V1.0 Software Version: V1.0 Operation Frequency: 115~205KHz Modulation type: ASK Antenna Type: Induction coil Antenna Power supply: Input: DC 12V from adapter Output: wireless10W/7.5W/5W - Page 6 of 12 - Report No.: ET-23020059E02 Tel:(86-755) 85259392…

Text truncated - open the document above for the full version.

R Report No.: ET-23020059E01 This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen ETR Standard Technology Co., Ltd TEST REPORT Applicant: ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. Address of Applicant: Floor 5, Building A, No.5 Jiuzhou Avenue, Health Base, Torch Development Zone, Zhongshan City Manufacturer/Factory: ZHONGSHAN JIUZAN INTELLIGENT TECHNOLOGY CO., LTD. Address of Manufacturer/Factory: Floor 5, Building A, No.5 Jiuzhou Avenue, Health Base, Torch Development Zone, Zhongshan City Product Name: Temperature Control Coffee Mug Model No.: F1 Trade Mark: N/A FCC ID: 2A95B-F11 Applicable standards: FCC CFR Title 47 Part 18 Date of Test: Jan.06, 2023- Jan.29, 2023 Date of report issued: Feb.20, 2023 Test Result : PASS Remark: * In the configuration tested, the EUT complied with the standards specified above. The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver Prepared By Shenzhen ETR Standard Technology Co., Ltd. Address: No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Compiled by: Reviewed by: Approved by: Project Engineer Project Manager Authorized Signature - Page 2 of 17 - Report No.: ET-23020059E01 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Report Revision History Report No. Description Issue Date ET-23020059E01 Original Feb.20, 2023 - Page 3 of 17 - Report No.: ET-23020059E01 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Contents Page 1 TEST SUMMARY ......................................................................................................................................4 2 GENERAL INFORMATION .......................................................................................................................5 2.1 GENERAL DESCRIPTION OF EUT ..........................................................................................................5 2.2 TEST MODE .........................................................................................................................................6 2.3 DESCRIPTION OF SUPPORT UNITS ........................................................................................................6 2.4 DEVIATION FROM STANDARDS ..............................................................................................................6 2.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................6 2.6 TEST FACILITY.....................................................................................................................................6 2.7 TEST LOCATION...................................................................................................................................6 3 TEST INSTRUMENTS LIST ......................................................................................................................7 4 TEST RESULTS AND MEASUREMENT DATA .......................................................................................8 4.1 CONDUCTED EMISSIONS ......................................................................................................................8 4.2 RADIATED EMISSION MEASUREMENT ..................................................................................................11 5 TEST SETUP PHOTO .............................................................................................................................17 6 EUT CONSTRUCTIONAL DETAILS .......................................................................................................17 - Page 4 of 17 - Report No.: ET-23020059E01 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 1 Test Summary Test Item Section in CFR 47 Result Test by AC Power Line Conducted Emission 18.307(b) Pass Qiao Li Radiated Emission 18.305(b) Pass Qiao Li Remarks: 1. Pass: The EUT complies with the essential requirements in the standard. 2. Test according to FCC MP-5 Measurement Uncertainty Test Item Frequency Range Measurement Uncertainty Notes Radiated Emission 9KHz-30MHz ±3.98 dB (1) Radiated Emission 30MHz-1000MHz ±4.30 dB (1) Radiated Emission 1GHz-18GHz ±4.35 dB (1) Radiated Emission 18GHz-40GHz ±4.59 dB (1) AC Power Line Conducted Emission 0.15MHz ~ 30MHz ± 3.02 dB (1) Note (1): The measurement uncertainty is for coverage factor of k=2 and a level of confidence of 95%. - Page 5 of 17 - Report No.: ET-23020059E01 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 2 General Information 2.1 General Description of EUT Product Name: Temperature Control Coffee Mug Model No.: F1 Model of difference: N/A Test model: F1 Sample(s) Status: Engineer sample Hardware Version: V1.0 Software Version: V1.0 Operation Frequency: 115~205KHz Modulation type: ASK Antenna Type: Induction coil Antenna Power supply: Input: DC 12V from adapter Output: wireless10W/7.5W/5W - Page 6 of 17 - Report No.: ET-23020059E01 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 2.2 Test mode Test mode Description Remark M…

Text truncated - open the document above for the full version.

ET-23020059 Page 1 of 2 Product Name: Temperature Control Coffee Mug Test Model No.: F1 Test Setup Photo Radiated emissions 0.009MHz to30MHz 30MHz to1GHz ET-23020059 Page 2 of 2 Conducted Emission ------End------