2A985-RC-02Remote Controls

76 34 5 Introduction 2 Can the remote control or the wireless switch control more than 1 lamp? No Is it compatible with smart plugs? Yes. It can be used with smart plugs to control on/off, but not for adjusting brightness or changing color temperature. • Please use the adapter included, and do not use others. • This lamp is not waterproof; please av oid water and splashes. •The working temperature for this lamp is 14-104°F. •The light source of this lamp is irreplaceable. If there is a failure, the whole lamp needs to be switched. •Do not let children assemble or pla y with the lamp by themselv es. • Please keep from heat source. • Please keep from potential endangerment. • Please place this lamp on level surfaces We provide a 12-month warranty for the light and a 60-day mon- ey-back guarantee for quality problems. Note: Damages caused by the disregard of this user manual are not subject to warranty. At LEPOWER-TEC, we value your experience. If you have any ques- tions about our products, click 'ask a question' in our store and email us. Our dedicated team will respond promptly to provide the support you need. Thank you for choosing LEPOWER-TEC, and we look forward to serving you. What is the control radius of the remote control and the wireless wall switch? The maximum is 42.8ft when there are no obstacles. The wireless wall switch does not work. 1.Press an y side of the wireless wall switch. If the indicator does not light up, please switch the battery. 2.Press any side of the wireless wall switch. If the indicator lights up, please repair the wireless wall switch to the light: Control Panel Main Light On/Off Main Light Brightness Levels Main Light Color Temperature Side Light On/Off Side Light Brightness Levels Side Light Color Temperature Timer Indicator Remote Control Remote Control Indicator Side Light On/Off Side Light Brightness Levels Side Light Color Temperature 1hr Timer Main Light On/Off Main Light Brightness Levels Main Light Color Temperature Night Light Wireless Wall Main Light On/Off Side Light On/Off Timer: Press to set a 1hr off-timer. Works at the same time on both the main light and the side light. Night Light: Press to enter night light mode. Long press to adjust the brightness of the night light (40-200lm). Note: For all the above, the main light and the side light are controlled separately. Specifications Controls & Indicators Troubleshooting Model: FM-28 CRI: >90 Height: 70.9in Adapter: DC24V/1.5A Material: Metal + PC Cord Length: 78.7in 1. Torchiere Lamp X1 3. Wireless Wall Switch X1 5. AAA Battery X2 7. User Manual X1 Package Contents 2. Remote Control X1 4. Adapter X1 6. 27A Battery X1 IssuesSolutions IssuesSolutions The remote control does not work. 1.Press any button on the remote control. If the indicator does not light up, please switch the battery. 2.Press any button on the remote control. If the indicator lights up, please repair the remote control to the light: Press any button on the remote control. Repair is finished, and the main light should stay on. While the light is plugged in and powered, press and of the main light simultaneously for 2s until the main light starts to flash. Warranty Cautions Contact Us While the light is plugged in and powered, press and of the main light simultaneously for 2s until the main light starts to flash. Press any side of the wireless wall switch. Repair is finished, and the main light should stay on. 1. Unbox the light and all accessories. Check the package content list, and if any part(s) is missing, please contact our customer service team. 2. Tighten the pole clockwise according to the steps. 3. Plug in. Instructions 4. Put the AAA battery into the remote control. 5. Put the 27A battery into the wireless wall switch. Push upward until it opens Push back 注： 尺寸：宽592*高210mm 四折 材质：128g双铜 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Shenzhen Qichuang Green Technology Co., Ltd. 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen Qichuang Green Technology Co., Ltd. Address: 601, Building 1, D Area, Huameiju Business Center, Yulv Road, Baoan District, Shenzhen China Product Name: Remote Controls FCC ID: 2A985-RC-02 Model(s): RC-02 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen Qichuang Green Technology Co., Ltd. ] (“the applicant”) designate [Agent located in the United States] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: ANTEK SERVICE INC Address: 901 N PENNSYLVANIA ST STE 0 DENVER, CO 80203 Contact Name: Shirley Kwok Telephone No: 01 303-8006306 Email: [email protected] Applicant Company name: Shenzhen Qichuang Green Technology Co., Ltd. Address: 601, Building 1, D Area, Huameiju Business Center, Yulv Road, Baoan District, Shenzhen China FCC Grantee Code: 2A985 Contact Name: yanxia Li Telephone No: 0755-23884802 Email: [email protected] Shenzhen Qichuang Green Technology Co., Ltd. 2.911 (d)(7)USA Agent v1.2 Signature: Title: Manager Signature: Title: Purchasing supervisor Date: 03-08-2023 Date: 03-08-2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Page 1 of 3 FCC ID: 2A985-RC-02 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity External Photos of the EUT Fig. 1 Fig. 2 Page 2 of 3 FCC ID: 2A985-RC-02 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 3 FCC ID: 2A985-RC-02 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6

Page 1 of 1 FCC ID: 2A985-RC-02 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity LABEL AND LOCATION Label Location

Page 1 of 4 FCC ID: 2A985-RC-02 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Internal Photos of the EUT Fig. 1 Fig. 2 Page 2 of 4 FCC ID: 2A985-RC-02 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Antenna Page 3 of 4 FCC ID: 2A985-RC-02 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 4 FCC ID: 2A985-RC-02 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7

Page 1 of 3 FCC ID: 2A985-RC-02 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC RF Exposure Evaluation 1. Product Information Product name Remote Controls Test Model RC-02 Power Supply Alkalina Battery: 12V, 27A Hardware Version / Software Version / Frequency Range 433.92MHz Channel Number 1 Modulation Type ASK Antenna Description PCB Antenna, 0dBi (max.) Exposure category General population/uncontrolled environment EUT Type Production Unit Device Type Portable Device Page 2 of 3 FCC ID: 2A985-RC-02 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 2.Evaluation method and Limit According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.“ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to f) in section 4.1 is applied to determine SAR test exclusion. When one of the following test exclusion conditions is satisfied for all combinations of simultaneous transmission configurations, further equipment approval is not required to incorporate transmitter modules in host devices that operate in the mixed mobile and portable host platform exposure conditions. The grantee is responsible for documenting this according to Class I permissive change requirements. Antennas that qualify for standalone SAR test exclusion must apply the estimated standalone SAR to determine simultaneous transmission test exclusion. a) The [∑ of (the highest measured or estimated SAR for each standalone antenna configuration, adjusted for maximum tune-up tolerance) / 1.6 W/kg] + [∑ of MPE ratios] is ≤ 1.0. b)The SAR to peak location separation ratios of all simultaneously transmitting antenna pairs operating in portable device exposure conditions are all ≤ 0.04, and the [∑ of MPE ratios] is ≤ 1.0. 3. Refer Evaluation Method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General 1 RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1093: Radiofrequency radiation exposure evaluation: portable devices Page 3 of 3 FCC ID: 2A985-RC-02 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 4. Conducted Power Test Procedure TX frequency range: 433.92 MHz Device category: Portable device (Distance: 5mm) Max. Field Strength: 60.70dBuV/m @3m EIRP=E-104.7+20logD=60.70-104.7+20log3=-34.46dBm Maximum Conducted Output Power: -34.46dBm Tune up: -34±1 5. Evaluation Results Band/Mode f (GHz) Antenna Distance (mm) RF output power SAR Test Exclusion Threshold SAR Test Exclusion dBm mW ASK 0.43392 5 -33 0.0005 0.0001< 3.0 Yes Remark: 1. Output power including tune up tolerance; 2. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to f) in section 4.1 is applied to determine SAR test ex…

Text truncated - open the document above for the full version.

Gain: 0dBi frequency:433.92Mhz Modulation Type:ASK Manufacturer: Shenzhen Qichuang Green Technology Co., Ltd. Model: RC-02 Ant

Page 1 of 27 FCC ID: 2A985-RC-02 Report No.: LCSA11073024EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT For Shenzhen Qichuang Green Technology Co., Ltd. Remote Controls Test Model: RC-02 Prepared for : Shenzhen Qichuang Green Technology Co., Ltd. Address : 601, Building 1, D Area, Huameiju Business Center, Yulv Road, Baoan District Shenzhen, Guangdong China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : November 22, 2023 Number of tested samples : A231107031-1, A231107031-2 Serial number : Prototype Date of Test : November 22, 2023 ~ November 29, 2023 Date of Report : December 01, 2023 Page 2 of 27 FCC ID: 2A985-RC-02 Report No.: LCSA11073024EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT FCC CFR 47 PART 15 C(15.231) Report Reference No. .............. : LCSA11073024EA Date of Issue ............................... : December 01, 2023 Testing Laboratory Name ......... : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ...................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure ....... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ...................... : Shenzhen Qichuang Green Technology Co., Ltd. Address ...................................... : 601, Building 1, D Area, Huameiju Business Center, Yulv Road, Baoan District Shenzhen, Guangdong China Test Specification Standard ..................................... : FCC CFR 47 PART 15 Subpart C, ANSI C63.10-2013 Test Report Form No. ............... : LCSEMC-1.0 TRF Originator ............................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ................................. : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. ............... : Remote Controls Trade Mark ................................. : LEPOWER \GLORIOUS-LITE\Lepower-tec Test Model .................................. : RC-02 Ratings ....................................... : Alkalina Battery: 12V, 27A Result ....................................... : Positive Compiled by: Supervised by: Approved by: Vera Deng/ Administrator Cary Luo/ Technique principal Gavin Liang/ Manager Page 3 of 27 FCC ID: 2A985-RC-02 Report No.: LCSA11073024EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC -- TEST REPORT EUT......................................... : Remote Controls Test Model........................... : RC-02 Applicant............................... : Shenzhen Qichuang Green Technology Co., Ltd. Address.................................. : 601, Building 1, D Area, Huameiju Business Center, Yulv Road, Baoan District Shenzhen, Guangdong China Telephone............................... : / Fax.......................................... : / Manufacturer....................... : Signcomplex Limited Address................................... : 4th Floor, Mingfeng Building, No.2 Xikeng Road, Fucheng Street, Longhua District, Shenzhen, Guangdong, China Telephone............................... : / Fax.......................................... : / Factory....................... : Shenzhen Qichuang Green Technology Co., Ltd. Address................................... : 601, Building 1, D Area, Huameiju Business Center, Yulv Road, Baoan District Shenzhen, Guangdong China Telephone............................... : / Fax.......................................... : / Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCSA11073024EA December 01, 2023 Date of issue Page 4 of 27 FCC ID: 2A985-RC-02 Report No.: LCSA11073024EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Revision History Report Version Issue Date Revision Content Revised By 000 December 01, 2023 Initial Issue -- Page 5 of 27 FCC ID: 2A985-RC-02 Report No.: LCSA11073024EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster…

Text truncated - open the document above for the full version.

Page 1 of 1 FCC ID: 2A985-RC-02 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Setup Photos of the EUT Test Setup Photo(s) of Radiated Emissions Measurement Fig. 1 Fig. 2