2A992-Z202301ALSleep enhancer

Sleep enhancer User Manual Equipped with Sleep Recording and Enhancement Function zable_sleep_enhancer_manual_23.07.D0 BRLab Inc. Z202301AL FCCID: 2A992-Z202301AL Product Specifications and Names of Each Mattress 1.Sleep
Enhancer
A
/
As 2.Sleep
Enhancer
B 3.Stimulator Sleep Enhancer A the front 1.Connect
to
power 2.As
board
connect
to 3.Microphone 4.Reset
button 5.Main
LED 6.Sub
LED 7.Humidity
sensor Back 1.B
board
connect
to Sleep Enhancer B back 1.A
board
connect
to 2.Stimulator
connect
to Bottom 1.NTC
connect
to 2.pvdf
connect
to 3.fsr
sensor
connect
to 4.fsr
sensor
connect
to 5.Main
LED 6.Sub
LED 7.Humidity
sensor Power adapter and cable Enhancer connection cable Sleep Enhancer As Front Sleep
Enhancer
As
is
included
only
for
2
person
bed
the 1.A
board
connection 2.microphone is
the
same
as
the
rear
part
of
A. Product Internal Diagram Product Information ItemDescription Product NameMattress Model Electrical Requirements100-240 V~ 50/60Hz 60 VA Power Consumption12V d.c. / 2W (TBD) Operating Temperature-10 ~ 50°C Dimensions and Weight10kg (TBD) / 1100mm x 2000mm x 100mm HardwareSleep Enhancer A -CPU: Quad-core ARM Cortex-A35, Memory: DDR3 SDRAM 4G, Storage: eMMC 5.1, 16GB Z202301AL Sleep Enhancer B -800/400MHz 32-bit ARM9, Memory: DDR2 64MB SoftwareSleep Enhancer A -OS: RK3326 embedded linux(kernel 4.4 or higher) Sleep Enhancer B -OS: RTOS interface and peripheralsWifi: 2.4Ghz Bluetooth: BLE 4.0 ManufacturerBRLAB Inc. Precautions for safety ●Ensure to only use the power adapter and cable provided with the device. Using other adapters may cause product failure, overheating, fire, explosion, or. ●Do not arbitrarily disassemble, repair, or modify the product, and contact the customer center when repair is required. Warranty does not apply to products that have been arbitrarily disassembled. ●Do not subject the product to strong impacts such as dropping it or jumping on it from above. This can cause damage to the internal sensor. ●Do not expose the product to extremely high or low temperatures. Short circuit or overheating may occur inside the product. ●Ensure not to expose the product to liquids. Liquids may cause malfunction and increase the risks of electrocution. ●Be careful not to allow foreign substances (liquid, dust, metal powder, pencil lead, etc.) to enter the power connection of the product. Explosion or fire may occur due to corrosion of power terminals or temporary short circuit (short circuit). ●Do not allow foreign substances such as beverages or water to enter the product Insure that the device is not to be submerged underwater at any times.This may cause malfunction or electric shock. ●Do not install in a humid place. It may cause fire or electric shock. ●If the product has been exposed to wetness or water, immediately disconnect the product from the power source. Be mindful of the risks of electrocution when doing so. This product is designed for indoor use and is not waterproof or moisture proof. Coin Battery Precautions Coin batteries are included in the product. Battery replacement must be replaced with a battery recommended by the manufacturer through a Zable authorized repairer. ●If the battery is replaced with the wrong type, there is a risk of explosion. ●When disposing of batteries, dispose of them in accordance with local laws or regulations. ●Do not dispose of the battery in a fire or hot oven that may cause an explosion, or mechanically crush or cut the battery. ●Do not place the battery in a high temperature environment that may cause an explosion or leakage of flammable liquid or gas. ●Keep the battery out of reach of children. If your child swallows a battery or enters the body, you should seek treatment immediately. Product Description ●This product includes hardware and software that helps you record, analyze and improve your sleep Product Installation This product is intended to be used as part of a mattress or topper and the instructions for installing the product will be based on that. 1. Place the Zable mattress on the bed frame you are using. [Check the direction of your head.] 2. Connect the power cable to the adapter. Insert the adapter into the power connection at the head of the mattress as shown in the diagram below. [Connect to the right side of the bedside connector] 3. Connect the power cable to the adapter and plug it into an outlet.f\ 4. When the power is connected, the product automatically initiates a melody that indicates its readiness to be used. For 2 persons 1. Place the mattress on the frame as shown below. As shown in the image below, place the mattress with Sleep Enhancer A on the right and the mattress with Sleep Enhancer As on the left. 2. Connect the two enhancers with the cable provided. The connection part is located on the far left as shown in the picture above.

How to use This product can be used immediately after installation, without further administration 1.The product will automatically initiate sleep-tracking when in use. 2.Provides very low stimulation feedback when the user goes to sleep. ○The level of stimulation that the user cannot directly feel does not interfere with sleep. 3.Sleep tracking ends when the user removes themselves from the bed. 4.Sleep log results can be checked through the downloaded Dayna app. ○go.dayna.app, you can install the Dayna app by clickingthe Play Store or App Store link. How to use the app Launch the downloaded app. Connect to a product 1.Tap the Add button. 2.Tap the Connect button to go to the settings screen. 3.Set the WIFI password and stimulation sensitivity, then tap the Set button. 4.After setup is complete, the registered product will be displayed in the app. Viewing product information and setting sensors and features Tap the registered product on the app screen. Set alarms You can set alarms for your registered products. Changes are automatically saved and updated when connected to the product. Viewing sleep logs Sleep log is generated after you sleep on a product. You will see the new sleep information when you turn on the app, and you can see the details by tapping Sleep report. Precautions for use ●Zable contains a sensor for sleep tracking and feedback, hence sleep-related functions will not work as intended if the mattress is placed in an improper manner. ●If liquids such as water is spilled on the product, immediately disconnect the power cable from the outlet to cut off the power. After drying sufficiently, connect the power and use it. If malfunction issues persist and the device does not work extensively , please contact customer service. ●In particular, if liquids such as water geton the connector where the power is connected, cut off the power immediately. ●This product is recommended to be used on a bed frame as a mattress. \Using this product without a bed frame (placing it on the floor etc.) may cause excessive and unintended noise between different levels or storeys. ●In the case of two people, when reinstalling after removing the mattress, ensure to reinstall it with care, confirming that the position of the mattresses are in order and in their correct locations. If mattress positions are alternated, the information collected by sleep-track may also be reversed. ●Do not arbitrarily remove the microphone attached to the Sleep Enhancer or connect another USB. It may cause a malfunction. Washing method ●For products that cannot be washed normally, professional dry cleaning services are available through Zable Cleaning Service. For details, please check via the customer center. ●It is recommended to use with a duvet or mattress cover on. ●The product may be damaged if stored outdoors in high temperature and/or humidity or in a low temperature environments (below 10 degrees Celsius). Failure and Customer Center ●After installation of the product, if a repeated "beep" is played instead of the intended melody, unplug the device and re-attempt to install the device. If the repeated "beep" persists after reinstallation, please contact the customer center below. ●After installing the product and connecting it to the power, the product starts operating within 30 seconds. If there is no sound after 30 seconds, please contact customer service. Customer Center Information ●BRLAB Inc. ●9th floor, Hana Building, 18 Teheran-ro 10-gil, Gangnam-gu, Seoul ●Tel: 070-8648-3974 ○Weekdays 10:00 ~ 16:00 | Closed on weekends and holidays ●mail: [email protected] FCC statement ●This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ●This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ○Reorient or relocate the receiving antenna. ○ncrease the separation between the equipment and receiver. ○Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ○Consult the dealer or an experienced radio/TV technician for help. ●Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. ●This device complies with RF exposure requirement. Quality assurance certificate (this does not apply to printouts) DateContent 22.07.06Draft 22.07.02 22.07.14 2-person product installation Added additional manufacturer (TBD -> B.R.A.B.) 22.07. 25Add image Delete zipper bag Change product name (Dana -> Zable) 22.07.26Add image 22.12.20Delete topper-related parts and change contents to mattress 23.01.06Add Battery Safety Precautions 23.02.14Add FCC statement Add app instruction

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: • cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) • cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) • Agent can be Individual Entity or a Company Entity • Agent Entity must be located in US, US address/phone • Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) • Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. BRLab Inc. 9F, 18, Teheran-ro 10-gil, Gangnam-g Seoul South Korea U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: March 9, 2023 Signed by (Printed Name/Title): Nathan Grinager / Co-President *This letter must be dated within 1-year (update if other terms apply) of the date the application is submitted to the TCB for device certification The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: BRLab Inc. Grantee Code: 2A992 FCC ID: 2A992-Z202301AL Contact Name: EUIHYUN KANG Street Address: 9F, 18, Teheran-ro 10-gil, Gangnam-gu, Seoul, Republic of Korea City/Province/Zip: 06234 Telephone No: +82-70-4196-3970 Email: [email protected] Applicant Signature: Date: 03/09/2023 Signed by (Printed Name/Title): Head of Management Support Dept.

BRLab Inc. 9F, 18, Teheran-ro 10-gil, Gangnam-g Seoul South Korea Date: March 10, 2023 Certification Attestation Statements Attn: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA To Whom It May Concern: BRLab Inc. certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: NA 47 CFR section 2.911(d)(5)(ii) Attestation Statement BRLab Inc. (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is /  - is not identified on the Covered List as an entity producing “covered” equipment . Thank you, Signature Name: EUIHYUN KANG Title: Head of Management Support Dept. Company: BRLab Inc. Tel #: 82-70-4196-3970 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters should be placed on appropriate letterhead. 47 CFR section 2.911(d)(5)(i) Attestation Statement Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCCID: 2A992-Z202301AL

BRLab Inc. 9F, 18, Teheran-ro 10-gil, Gangnam-g Seoul South Korea Date: 02/28/2023 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Request of Confidentiality FCC ID: 2A992-Z202301AL To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, BRLab Inc. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give BRLab Inc. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Schematics 3 Part Lists 4 Operation Description 5 NA SHORT-TERM 6 Internal Photos 7 External Photos 8 Test-Setup Photos 9 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Contact Name: EUIHYUN KANG Title: Head of Management Support Dept.

BRLab Inc. 9F, 18, Teheran-ro 10-gil, Gangnam-g Seoul South Korea Date: 02/28/2023 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Letter of Authorization We, the undersigned, hereby authorize Geunki Son of Dt&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: 2A992-Z202301AL including signing of all documents relating to these matters. Any and all acts carried out by Geunki Son of Dt&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from BRLab Inc.. “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Contact Name: EUIHYUN KANG Title: Head of Management Support Dept.

FCC ID: 2A992-Z202301AL Copyright Ⓒ 2023, Dt&C Co., Ltd. View 1 <A Board> FCC ID: 2A992-Z202301AL Copyright Ⓒ 2023, Dt&C Co., Ltd. View 2 FCC ID: 2A992-Z202301AL Copyright Ⓒ 2023, Dt&C Co., Ltd. View 3 FCC ID: 2A992-Z202301AL Copyright Ⓒ 2023, Dt&C Co., Ltd. View 4 <Port 1> <Port 2> FCC ID: 2A992-Z202301AL Copyright Ⓒ 2023, Dt&C Co., Ltd. View 5 <Power adapter> FCC ID: 2A992-Z202301AL Copyright Ⓒ 2023, Dt&C Co., Ltd. View 6 <B Board> FCC ID: 2A992-Z202301AL Copyright Ⓒ 2023, Dt&C Co., Ltd. View 7 FCC ID: 2A992-Z202301AL Copyright Ⓒ 2023, Dt&C Co., Ltd. View 8 FCC ID: 2A992-Z202301AL Copyright Ⓒ 2023, Dt&C Co., Ltd. View 9 <Port 1> <Port 2>

90mm 45mm Product : Model : Parts : Manufacturer : Country : Date : Cert No. : FCC ID : Sleep enhancer A Z202301ALZAM 202301ABRLabInc. Made in Korea R-R-xxx-yyyy 2A992-Z202301AL This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Serial No: BRLABLabel height of each certification mark is 6 mm Product / Model / Parts SingleProductModelParts Sleep enhancer A Sleep enhancer B Main A Module Main B Module ZAM202301A ZBM202301A Z202301AS DoubleProductModelParts Sleep enhancer A Sleep enhancer B Sleep enhancer As Sleep enhancer B Main A Module Main B Module Sub A Module Sub B Module ZAM202301A ZBM202301A ZAS202301A ZBM202301A Z202301AL Label Location In the center of the bottom surface of each module outer cover. Due to the size of the product, the label is not exposed to the outside, so additionally printed on the manual < TOP >

FCC ID: 2A992-Z202301AL Copyright Ⓒ 2023, Dt&C Co., Ltd. View 1 <A Board> FCC ID: 2A992-Z202301AL Copyright Ⓒ 2023, Dt&C Co., Ltd. View 2 FCC ID: 2A992-Z202301AL Copyright Ⓒ 2023, Dt&C Co., Ltd. View 3 FCC ID: 2A992-Z202301AL Copyright Ⓒ 2023, Dt&C Co., Ltd. View 4 FCC ID: 2A992-Z202301AL Copyright Ⓒ 2023, Dt&C Co., Ltd. View 5 FCC ID: 2A992-Z202301AL Copyright Ⓒ 2023, Dt&C Co., Ltd. View 6 <Antenna> FCC ID: 2A992-Z202301AL Copyright Ⓒ 2023, Dt&C Co., Ltd. View 7 <B Board> FCC ID: 2A992-Z202301AL Copyright Ⓒ 2023, Dt&C Co., Ltd. View 8

FCC ID: RF featureMode Transmitting Frequency(MHz) Test separation distance (mm) ANT Gain (dBi) Max. power with tune-up tolerance (dBm) Note1 Max. power with tune-up tolerance (mW) Power thresholds SAR test exclusion thresholds BLE1Mbps2 480.005.01.994.502.818 40.893.00 WLAN802.11b2 462.005.01.998.006.309 61.983.00 Note1. Conclusion : = [ ( 2.8184mW / 5mm ) ] X [ √2.48GHz ] = 0.89 Note. The calculation result was rounded to two decimal place for comparison. 2A992-Z202301AL Please refet to the operation description for Max Tune-up power. Standalone SAR test exclusion considerations SAR evaluation for general population exposure conditions by measurement or numerical simulation is not required KDB 447498 D01 clause 4.3.1 Step 1) SAR test exclusion thresholds for 100MHz to 6GHz at test separation distances ≤ 50 mm [ ( max. power of channel, including tune-up tolerance, mW ) / ( min. test separation distance, mm ) ] · [ √f(GHz) ] ≤ 3.0 for 1g SAR and ≤ 7.5 for 10g extremity SAR Sample Calculation

Report No.: DRTFCC2303-0021 FCC ID: 2A992-Z202301AL This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-236(05)210316 Pages: 2 / 70 Test Report Version Test Report No. Date Description Revised by Reviewed by DRTFCC2303-0021 Mar, 07. 2023 Initial issue JaeHyeok Bang JaeJin Lee Report No.: DRTFCC2303-0021 FCC ID: 2A992-Z202301AL This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-236(05)210316 Pages: 3 / 70 Table of Contents 1. General Information .................................................................................... 4 1.1. Description of EUT .......................................................................................................... 4 1.2. Declaration by the applicant / manufacturer ................................................................ 4 1.3. Testing Laboratory .......................................................................................................... 5 1.4. Testing Environment ....................................................................................................... 5 1.5. Measurement Uncertainty............................................................................................... 5 1.6. Test Equipment List ........................................................................................................ 6 2. Test Methodology ........................................................................................ 7 2.1. EUT Configuration ........................................................................................................... 7 2.2. EUT Exercise .................................................................................................................... 7 2.3. General Test Procedures ................................................................................................ 7 2.4. Instrument Calibration .................................................................................................... 7 2.5. Description of Test Modes.............................................................................................. 8 3. Antenna Requirements ............................................................................... 9 4. Summary of Test Result ........................................................................... 10 5. Test Result ................................................................................................. 11 5.1. Maximum Peak Conducted Output Power .................................................................. 11 5.1.1. Test Setup .................................................................................................................. 11 5.1.2. Test Procedures ........................................................................................................ 11 5.1.3. Test Results ............................................................................................................... 11 5.2. 6 dB Bandwidth ............................................................................................................. 13 5.2.1. Test Setup .................................................................................................................. 13 5.2.2. Test Procedures ........................................................................................................ 13 5.2.3. Test Results ............................................................................................................... 13 5.3. Power Spectral Density ................................................................................................. 20 5.3.1. Test Setup .................................................................................................................. 20 5.3.2. Test Procedures ........................................................................................................ 20 5.3.3. Test Results ............................................................................................................... 20 5.4. Unwanted Emissions (Conducted) .............................................................................. 27 5.4.1. Test Setup .................................................................................................................. 27 5.4.2. Test Procedures ........................................................................................................ 27 5.4.3. Test Results ............................................................................................................... 28 5.5. Unwanted Emissions (Radiated) .................................................................................. 52 5.5.1. Test Setup .................................................................................................................. 54 5.5.2. Test Procedures ........................................................................................................ 54 5.5.3. Test Results ............................................................................................................... 55 5.6. AC Power-Line Conducted Emissions ........................................................................ 57 5.6.1. Test Setup .................................................................................................................. 57 5.6.2. Test Procedures ........................................................................................................ 57 5.6.3. Test Results ............................................................................................................... 57 APPENDIX I .................................................................................................... 60 APPENDIX II ................................................................................................... 61 APPENDIX III ........................................................................................…

Text truncated - open the document above for the full version.

Report No.: DRTFCC2303-0020 FCC ID: 2A992-Z202301AL This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-238(06)210316 Pages: 2 / 39 Test Report Version Test Report No. Date Description Revised by Reviewed by DRTFCC2303-0020 Mar, 07. 2023 Initial issue JaeHyeok Bang JaeJin Lee Report No.: DRTFCC2303-0020 FCC ID: 2A992-Z202301AL This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-238(06)210316 Pages: 3 / 39 Table of Contents 1. General Information .................................................................................... 4 1.1. Description of EUT .......................................................................................................... 4 1.2. Declaration by the applicant / manufacturer ................................................................ 4 1.3. Testing Laboratory .......................................................................................................... 5 1.4. Testing Environment ....................................................................................................... 5 1.5. Measurement Uncertainty............................................................................................... 5 1.6. Test Equipment List ........................................................................................................ 6 2. Test Methodology ........................................................................................ 7 2.1. EUT Configuration ........................................................................................................... 7 2.2. EUT Exercise .................................................................................................................... 7 2.3. General Test Procedures .........................................................................…

Text truncated - open the document above for the full version.