Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Ultrahuman Healthcare Private Limited Address: No. 4088/799, Third Floor, V K Paradise Sector-2, HSR Layout Bangalore 560102, India Product Name: PRO CHARGER FCC ID: 2A99X-UHRPCHRGR01 Model(s): RPC-XX-XX 2.911(d)(5)(i) Equipment Type We, Ultrahuman Healthcare Private Limited (“the applicant”) certify that the equipment for which authorization is sought through certification is not: ● Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. ● Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Adhit Shet Date: 17 December 2025 Title and Company name: Founding Member, Ultrahuman Healthcare Private Limited NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the Ultrahuman Healthcare Pvt Ltd. CIN - U74999KA2019PTC129250 No. 4088/799, Third Floor, V K Paradise Sector-2, HSR Layout Bangalore 560102, India Contact – 1800 102 8693, [email protected]
Ultrahuman Healthcare Pvt Ltd. CIN - U74999KA2019PTC129250 No. 4088/799, Third Floor, V K Paradise Sector-2, HSR Layout Bangalore 560102, India Contact – 1800 102 8693, [email protected] Section 2.911(d)(5)(ii) Certification – Applicant (Covered List) Company name: Ultrahuman Healthcare Private Limited Address: No. 4088/799, Third Floor, V K Paradise Sector-2, HSR Layout Bangalore 560102, India Product Name: PRO CHARGER FCC ID: 2A99X-UHRPCHRGR01 Model(s): RPC-XX-XX 2.911(d)(5)(ii) Applicant filing We, Ultrahuman Healthcare Private Limited (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Adhit M Shet Date: 17 December 2025 Title and Company name: Founding Member, Ultrahuman Healthcare Private Limited . NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the- communications-supply-chain-through-the
2.911 (d)(7)USA Agent v1.5 Ultrahuman Healthcare Pvt Ltd. CIN - U74999KA2019PTC129250 No. 4088/799, Third Floor, V K Paradise Sector-2, HSR Layout Bangalore 560102, India Contact – 1800 102 8693, [email protected] Section 2.911(d)(7) USA Agent for Service of Process Company name: Ultrahuman Healthcare Private Limited Address: No. 4088/799, Third Floor, V K Paradise Sector-2, HSR Layout Bangalore 560102, India Product Name: PRO CHARGER FCC ID: 2A99X-UHRPCHRGR01 Model(s): RPC-XX-XX 2.911(d)(7) USA Designated Agent for Service of Process We, Ultrahuman Healthcare Private Limited (“the applicant”) designate Ultrahuman Healthcare LLC for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Ultrahuman Healthcare LLC USA Address: 8 The Green, 7640 Dover, Delaware 19901, U.S.A. FRN Number: 0037701166 Contact Name: Pavan Kumar Telephone No: +1 (945) 345-4074 Email: [email protected] Applicant Company name: Ultrahuman Healthcare Private Limited Address: No. 4088/799, Third Floor, V K Paradise Sector-2, HSR Layout Bangalore 560102, India Grantee FRN Number: 0033406430 FCC Grantee Code: 2A99X Contact Name: Adhit M Shet Telephone No: +91 97406 00004 Email: [email protected] Signature: Title: Signature: Title: Founding Team Date: Date: 17 December 2025 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to- the-communications-supply-chain-through-the Pavan Kumar (29 December, 2025 19:40:45 UTC) GM UltraFactory December 29, 2025 AUDIT TRAIL CONTRACT NAME2.911_(d)(7) US Agent for Service of Process_UH (Pavan to Sign) CONTRACT IDcf4de86e-c22a-41af-95e1-81021291543c STATUSExecuted DATE TIME FORMATDD MMMM, YYYY HH:mm:ss Timezone TIMEZONEUTC CONTRACT HISTORY SENT Sent for Signature to Pavan Kumar ([email protected]) by Firoz Berly (fir [email protected]). 29 December, 2025 19:28:21 UTC IP: 111.92.73.216 SIGNED Signed by Pavan Kumar ([email protected]). 29 December, 2025 19:40:46 UTC IP: 71.40.229.18 Collin County, TX, USA EXECUTED This document has been signed and executed by all parties.
Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 17 December 2025 Subject; Request for Confidentiality FCC ID: 2A99X-UHRPCHRGR01 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. ✓ Schematic Diagram ✓Block Diagram ✓Parts List ✓Operational Description ✓Tune-up Procedure ✓Internal Photos In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); ✓ External Photos ✓Test Setup Photos ✓User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR ✓ For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential Ultrahuman Healthcare Pvt Ltd. CIN - U74999KA2019PTC129250 No. 4088/799, Third Floor, V K Paradise Sector-2, HSR Layout Bangalore 560102, India Contact – 1800 102 8693, [email protected] documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Adhit Shet Title: Founding Team, Ultrahuman Healthcare Private Limited Ultrahuman Healthcare Pvt Ltd. CIN - U74999KA2019PTC129250 No. 4088/799, Third Floor, V K Paradise Sector-2, HSR Layout Bangalore 560102, India Contact – 1800 102 8693, [email protected]
Letter of Authorization Company: Ultrahuman Healthcare Private Limited Address:No. 4088/799, Third Floor, V K Paradise Sector-2, HSR Layout Bangalore 560102, India Product Name: PRO CHARGER Model Number(s): RPC-XX-XX Product Description: The Ring Pro Charging Case is used to store, protect, charge, and communicate with the Ring Pro when it is not being worn. We authorize Ultrahuman Healthcare LLC, 8 The Green, 7640 Dover, Delaware 19901, U.S.A.to act on our behalf on all matters concerning the certification of above named equipment. We declare that Ultrahuman Healthcare LLC is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by Ultrahuman Healthcare LLC on our behalf shall have the same effect as acts of our own. Signature : Date : 17 December 2025 Name: Adhit Shet Title: Founding Team Company : Ultrahuman Healthcare Private Limited Ultrahuman Healthcare Pvt Ltd. CIN - U74999KA2019PTC129250 No. 4088/799, Third Floor, V K Paradise Sector-2, HSR Layout Bangalore 560102, India Contact – 1800 102 8693, [email protected]
Responsibility Declaration Letter Company name: Ultrahuman Healthcare Private Limited Address: No. 4088/799, Third Floor, V K Paradise Sector-2, HSR Layout Bangalore 560102, India Product Name: PRO CHARGER FCC ID: 2A99X-UHRPCHRGR01 Model(s): RPC-XX-XX Model(s) Difference Description: See attachment We, Ultrahuman Healthcare Private Limited, hereby acknowledge that all the product information (including all original, drafted, or modified documents) provided to the TCB either by us or our agent or representative(s) for the purposes of FCC certification will meet FCC regulations and requirements; and that any modifications or changes made as a result of TCB review of the documents will be formally implemented into the manufacturing process and product documentation shipped with equipment. We also confirm that all information provided is legitimate and does not contain any false content such as forgery, fabrication, alteration, tampering and concealment. We assume all economic and legal responsibilities in matters that may arise as a result of disclosure on sample products and associated product documentation provided for product certification that may subsequently be found to be a mis-representation of the final product and accompanying documentation when produced, marketed, or sold in the United States, Canada, or anywhere in the world. Your sincerely, Name: Adhit M Shet Date: 17 December 2025 Title and Company name: Founding Team, Ultrahuman Healthcare Private Limited Ultrahuman Healthcare Pvt Ltd. CIN - U74999KA2019PTC129250 No. 4088/799, Third Floor, V K Paradise Sector-2, HSR Layout Bangalore 560102, India Contact – 1800 102 8693, [email protected]
TEST REPORT Page 1 of 9 Report Reference No. ....................... : 80260100008001 Sample ID ......................................... : BLC-01-0972722-004 Date of issue ..................................... : 20/01/2026 Total number of pages ...................... : 9 Testing Laboratory ............................ : TUV SUD South Asia Pvt Ltd Address............................................. : Plot No. 3-P1-B, Hitech Defence & Aerospace Park, KIADB Industrial Area, BK Palya, Bengaluru, Bengaluru North Taluk | Pin code – 562149 India Applicant’s name .............................. : Ultrahuman Healthcare Private Limited Address............................................. : No. 4088/799, Third Floor, V K Paradise Sector-2, HSR Layout, Bangalore, Karnataka, India - 560102 Client Representative................ ... .: Mr. Adhit Shet Test specification Standard............: RF Exposure Report FCC 47 CFR Part 2.1093 / ISED RSS-102 Issue 6 Test Method ...................................... : FCC KDB 447498 and RSS-102 Issue 6 Non-standard test method............. : NA Test Report Form Number.............: LAB_F(EE)_138-049 Product Name..............................: Pro Charger Test Item Description.....................: Designed to charge Ring Pro Fitness Ring. Manufacturer ...............................: Ultrahuman Healthcare Private Limited Model Number..............................: RPC-XX-XX Serial Number..............................: RPC-CG-INB-B3-ES01 Ratings........................................: 5V DC, 3A (Max) FCC ID.......................................: 2A99X-UHRPCHRGR01 IC ID..........................................: 30138-UHRPCHRGR01 Prepared by (Name + Signature) ..........................: Nikhil G Reviewed & Approved by (Name + Signature) ..........................: Raghunath M N TEST REPORT Report Reference. No.: 80260100008001 Page 2 of 9 Possible test case verdicts: - test case does not apply to the test object .... : N/A - test object does meet the requirement .......... : Pass - test object does not meet the requirement .... : Fail Testing: Condition of the EUT on Receipt.....................: Good Date of receipt of test item ............................... : 31/10/2025 Date (s) of performance of tests....................... : 05/11/2025 to 12/11/2025 General remarks: 1. The submitted sample(s) were not drawn by laboratory. 2. The test results presented in this report relate only to the object tested. 3. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. 4. The correctness of the information related to sample(s) in the Test Request Form/Customer letterhead/E-mail is the customer’s responsibility. The laboratory reports the said information in the test report and is not liable for the same. 5. The laboratory will retain the sample(s) for 45 days except for the mandatory retention period specified by the Regulatory Bodies and unless otherwise specified by the client. 6. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. “(see Enclosure #)” refers to additional information appended to the report. “(see appended table)” refers to a table appended to the report. 7. Throughout this report a point is used as the decimal separator. Use of uncertainty of measurement for decisions on conformity (decision rule): Yes/No No decision rule is specified by the IEC/EN standard, when comparing the measurement result with the applicable limit according to the specification in that standard. The decisions on conformity are made without applying the measurement uncertainty (“simple acceptance” decision rule, previously known as “accuracy method”). Other: (to be specified) Decisions on conformity: Decision on conformity of results is based on as per standard limits or criteria. Summary of compliance: The Product comply with the requirements of FCC 47 CFR Part 2.1093 / ISED RSS-102 Issue 6 TEST REPORT Report Reference. No.: 80260100008001 Page 3 of 9 Revision History of Records Test Report Number Version Reason for Change Date Issued 80260100008001 01 Initial Report 20/01/2026 TEST REPORT Report Reference. No.: 80260100008001 Page 4 of 9 CONTENTS 1 TEST SUMMARY .................................................................................................................................................................... 5 2 EQUIPMENT INFORMATION .................................................................................................................................................. 6 2.1 PRODUCT FUNCTION ............................................................................................................................................................. 6 2.2 PRO CHARGER MODEL NUMBER SYSTEM .................................................................................................................................... 6 2.3 GENERAL INFORMATION OF EUT ............................................................................................................................................. 6 3 RF EXPOSURE EVALUATION METHOD ................................................................................................................................... 7 3.1 FCC SAR TEST EXCLUSION EVALUATION ........................................................................................................................... 7 3.2 ISED SAR EXEMPTION EVALUATION ................................................................................................................................. 8 4 RESULTS SUMMARY .............................................................................................................................................................. 9 5 CONCLUSION ....................................…
Text truncated - open the document above for the full version.
2450AT18D0100001E Legacy P/N: 2450AT18D0100 Page 1 of 5 / Revision 5.0 Datasheet 2450AT18D0100001E johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 2023 Johanson Technology, Inc. All Rights Reserved 2.4GHz, EIA 1206, Bluetooth/WiFi/Zigbee Johanson Technology, Inc. (JTI) miniature RF ceramic chip antennas are made using Low Temperature Co-fired Ceramic (LTCC) technology which has the ability to embed low and high dielectric constants inside our antenna. This enables our components to have high detuning resilience and stability over extreme temperatures (~2ppm). General Specifications 1 2 Maximum Ratings 1 Typical value represents average measurement at 25°C. Min./Max. values represent measurements from -40°C to +85°C 2 General specifications measured on Johanson’s evaluation board PN 2450AT18D0100001CE1 Passband Frequency (MHz) 2400 - 2480 Peak Gain (dBi) 1.5 Average Gain (dBi) -1.0 Radiated Efficiency 72% Return Loss (dB) 10 min. Impedance (Ω) 50 Power Capacity (W) 2 max. (CW) Operating Temperature -40 to +125°C Recommended Storage Conditions post-installation (°C) -40 to +85 Recommended Storage Conditions and Period for Unused T&R Product 45% - 75% RH +5 to +35 °C 18 Months Max. Center-edge Circular Recommended mounting locations for this antenna 2450AT18D0100001E Legacy P/N: 2450AT18D0100 Page 2 of 5 / Revision 5.0 Datasheet 2450AT18D0100001E johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 2023 Johanson Technology, Inc. All Rights Reserved Mechanical Dimensions Terminal Configuration (Alternate) Pin Number Function Function Pin1 FEED GND Pin2 GND GND Pin3 GND GND Pin4 GND FEED L W a b Top view Side view b T Bottom view 4 3 2 Pin2 GND 1 Pin1 FEED Pin4 GND Pin3 GND (Can be swapped) L0.126±0.0083.20±0.2 W0.063±0.0081.60±0.2 T0.047±0.0041.20±0.1 a0.0120.30 b0.020±0.0080.50±0.2 +0.1 / -0.2+0.004 / -0.008 I nchesMillimeters 2450AT18D0100001E Legacy P/N: 2450AT18D0100 Page 3 of 5 / Revision 5.0 Datasheet 2450AT18D0100001E johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 2023 Johanson Technology, Inc. All Rights Reserved Evaluation Board and Mounting Configuration (PN 2450AT18D0100001CE1) 1.0 2.0 1.0 0.6 0.7 0.6 4.1 4.0 0 Ohm Antenna Matching Network Avoid GND on all layers Ground Plane 6.0 Land Solder Resist 50Ω GCPW GND Vias GND Clearance If you’d like the CAD PCB layout or have any questions, contact our application engineers at https://www.johansontechnology.com/ask-a-question Units in mm Ground Vias Feed 40 20 Antenna Matching Network Radiated efficiency is 72% Units in mm 2450AT18D0100001E Legacy P/N: 2450AT18D0100 Page 4 of 5 / Revision 5.0 Datasheet 2450AT18D0100001E johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 2023 Johanson Technology, Inc. All Rights Reserved Evaluation Board Return Loss Measurement Evaluation Board 2D Radiation Patterns If you would like to connect with a Johanson Technology RF engineer to go over the layout or suggest an antenna to go with your design, see our Ask-a-question page. 2.22.42.62.82.03.0 -20 -10 -30 0 f req, GHz dB(S(1,1)) m1 m2 m3 m1 f req= dB(S(1,1))=-13.935 2.400GHz m2 f req= dB(S(1,1))=-14.774 2.500GHz m3 f req= dB(S(1,1))=-24.894 2.450GHz +Z -Z +Y -Y +Z -Z +X -X θ +Z (θ = 0°) +Y (θ = 90°) -Y -Z θ +Z (θ = 0°) +X (θ = 90°) -X -Z φ +X (φ = 0°) -X +Y (φ = 90°) -Y +X -X +Y -Y 2450AT18D0100001E Legacy P/N: 2450AT18D0100 Page 5 of 5 / Revision 5.0 Datasheet 2450AT18D0100001E johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 2023 Johanson Technology, Inc. All Rights Reserved Orderable Part Number Important Links 2450AT18D0100001E Downloads More Antennas Antenna Tuning, Optimization, and Validation Services Soldering Information MSL Information Packaging Information RoHS Compliance Contact our application engineers for a PCB layout review! Part Number Explanation Packaging Style Bulk (loose pcs.) P/N. 2450AT18D0100001B T & R (7" Reel Embossed Tape) P/N. 2450AT18D0100001E (Qty: 1,000 pcs./reel) Evaluation Board Assembled PCB (50Ω SMA) P/N. 2450AT18D0100001CE1
TEST REPORT Page 1 of 63 Report Reference No. ...................... : 80260100007001 Sample ID ......................................... : BLC-01-0972722-004 Date of issue .................................... : 20/01/2026 Total number of pages ..................... : 63 Testing Laboratory ........................... : TUV SUD South Asia Pvt Ltd Address ............................................ : Plot No. 3-P1-B, Hitech Defence & Aerospace Park, KIADB Industrial Area, BK Palya, Bengaluru, Bengaluru North Taluk | Pin code – 562149 India Applicant’s name .............................. : Ultrahuman Healthcare Private Limited Address ............................................ : No. 4088/799, Third Floor, V K Paradise Sector-2, HSR Layout, Bangalore, Karnataka, India - 560102 Client Representative....................: Mr. Adhit Shet Test specification Standard............: FCC Part 15 Subpart C 15.203, 15.205, 15.207, 15.209 & 15.247 RSS 247 Issue 4, RSS Gen Issue 5 Test Method ..................................... : ANSI C63.10-2020 Non-standard test method............. : NA Test Report Form Number.............: LAB_F(EE)_138-51 Product Name..............................: Pro Charger Test Item Description.....................: Designed to charge Ring Pro Fitness Ring. Manufacturer ...............................: Ultrahuman Healthcare Private Limited Model Number..............................: RPC-XX-XX Serial Number..............................: RPC-CG-INB-B3-ES01 Ratings........................................: 5V DC, 3A (Max) FCC ID.......................................: 2A99X-UHRPCHRGR01 IC ID..........................................: 30138-UHRPCHRGR01 Tested by (Name + Signature) ..........................: Nikhil G Reviewed & Approved by (Name + Signature) ..........................: Raghunath M N TEST REPORT Report Reference. No.: 80260100007001 Page 2 of 63 Possible test case verdicts: - test case does not apply to the test object .... : N/A - test object does meet the requirement ......... : Pass - test object does not meet the requirement ... : Fail Testing: Condition of the EUT on Receipt.....................: Good Date of receipt of test item ............................... : 31/10/2025 Date (s) of performance of tests ...................... : 05/11/2025 to 12/11/2025 General remarks: 1. The submitted sample(s) were not drawn by laboratory. 2. The test results presented in this report relate only to the object tested. 3. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. 4. The correctness of the information related to sample(s) in the Test Request Form/Customer letterhead/E-mail is the customer’s responsibility. The laboratory reports the said information in the test report and is not liable for the same. 5. The laboratory will retain the sample(s) for 45 days except for the mandatory retention period specified by the Regulatory Bodies and unless otherwise specified by the client. 6. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. “(see Enclosure #)” refers to additional information appended to the report. “(see appended table)” refers to a table appended to the report. 7. Throughout this report a point is used as the decimal separator. Use of uncertainty of measurement for decisions on conformity (decision rule): Yes/No No decision rule is specified by the IEC/EN standard, when comparing the measurement result with the applicable limit according to the specification in that standard. The decisions on conformity are made without applying the measurement uncertainty (“simple acceptance” decision rule, previously known as “accuracy method”). Other: (to be specified) Decisions on conformity: Decision on conformity of results is based on as per standard limits or criteria. Summary of compliance: The Product comply with the requirements of FCC Part 15 Subpart C 15.203, 15.205, 15.207, 15.209 & 15.247 / RSS 247 Issue 4, RSS Gen Issue 5. TEST REPORT Report Reference. No.: 80260100007001 Page 3 of 63 Revision History of Records Test Report Number Version Reason for Change Date Issued 80260100007001 01 Initial Report 20/01/2026 TEST REPORT Report Reference. No.: 80260100007001 Page 4 of 63 Contents 1 GENERAL INFORMATION ....................................................................................................................................................... 6 1.1 APPENDICES ......................................................................................................................................................................... 6 2 TEST SUMMARY .................................................................................................................................................................... 7 3 MEASUREMENT UNCERTAINTY ............................................................................................................................................. 8 4 TEST EQUIPMENT USED ......................................................................................................................................................... 8 5 EQUIPMENT INFORMATION .................................................................................................................................................. 9 5.1 PRODUCT FUNCTION ............................................................................................................................................................. 9 5.2 PRO CHARGER MODEL NUMBER SYSTEM .................................................................................................................................... 9 5.3 GENERAL INFORMATION OF EUT ....................................................................................................…
Text truncated - open the document above for the full version.
8 The Green, 7640 Dover · Delaware, Delaware, 19901 · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 1.10 mW |
Smart health and fitness wearable in the form factor of a ring worn by a user on his/ her Finger
Equipment Class
DTS - Digital Transmission System