2A9B6WA-G1Bluetooth Headphones

＋ R R その他のデバイス 15：35 ← Bluetooth Bluetooth AVIOT WA-G1 R R Important Safety Instructions Before using the product, read through the instruction manual to ensure that you will use the product correctly. DANGER • Do NOT place the product into contact with fire. • Keep the headphones and accessories out of the reach of children and pets. Otherwise, it may lead to accidental swallowing or malfunction. • Do NOT disassemble the product. WARNING • Use the headphones in an environment in which you can ensure the safety of your surroundings because warning sounds and other sounds in your surroundings will be hard to hear. • Do NOT use, store, or leave the product in an environment with excessive humidity, dust, oil fumes, or steam, or in a high-temperature environment near a source of fire, in direct sunlight, or inside a vehicle. • Do NOT use the headphones when operating a motor vehicle, motorcycle, watercra , or bicycle. Be aware of the surrounding environment when wearing the headphones. • Do NOT allow water or foreign matter to get inside the product. Otherwise, this may result in a fire or electric shock. If water or foreign matter accidentally gets inside the product, stop using it immediately and contact your distributor. • Do NOT use the headphones under a blanket or the like. • Do NOT insert the USB connector when the headphones or USB cable is wet. Inserting a USB connector in a wet state may cause the headphones to short circuit due to contact with the liquid (tap water, seawater, cold drinks, etc.), and foreign matter entering into the headphones may result in abnormal heat generation or product failure. • Stop using the headphones if there is battery leakage or a peculiar smell, and keep the product away from flames. • Use the included USB charging cable to charge your headphones. NOTE • Do NOT use it for a long time at high volume. Otherwise, your hearing might be damaged. To protect your ears, be careful NOT to turn up the volume too high. In addition, regardless of the volume, extended use will place a burden on your ears. Please rest your ears every hour. • Do NOT use the product near medical equipment. Electromagnetic waves may have an impact on pacemakers and medical electronic devices. • Do NOT use them if the headphones cause any abnormal sensation against your skin. If your skin condition does not return to normal soon, seek medical attention. • Do NOT touch the headphones for an extended period during charging. Otherwise, it may result in a low-temperature burn. • Please follow the instructions of the flight attendant when using the product onboard an aircra . Electromagnetic waves may cause the device to malfunction, resulting in an accident. Discarding rechargeable batteries The built-in rechargeable battery this device is equipped with is a renewable resource. Dispose of the product according to local standards and regulations. Do NOT disassemble the product. For customers in the USA FCC Notice You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR). FCC ID: 2A9B6WA-G1 Radio interference of Bluetooth® products • Interference from electromagnetic radiation in the surrounding environment, such as that from wireless LAN equipment, microwave ovens, and other electromagnetic cooking appliances may result in noise, loss of sound, or communication being disconnected. • The e ective communication range of Bluetooth® may vary greatly due to the influence of shields (the human body, metal, walls, etc.) and the state of electromagnetic radiation in your surroundings. • The electromagnetic radiation generated by Bluetooth® devices may a ect the operation of other electronic devices. There is a risk of an accident occurring as a result in some cases, so turn o the power of the headphones and other Bluetooth® devices when in the following places: - Hospitals / near the priority seating on the subway / in the vicinity of gas stations and other places where combustible gas is generated / near fire alarms For long-lasting use • Beware of over-discharge If the rechargeable battery is not charged for a long time, it may lead to over-discharge and deterioration. If storing for a long time, …

Text truncated - open the document above for the full version.

PreseedJapanCorporation 3FKita-sandoDTBldg.,4-16-7Sendagaya,ShibuyaKu,Tokyo,151-0051,Japan AttestationStatements NotCoveredEntityApplicant&NotCoveredEquipment To:FederalCommunicationsCommissionDate:Nov.24,2025 7435OaklandMillsRoad, Columbia,MD21046,USA Ref:InformationRequiredbySection2.911(d)(5)(i)&(ii) FCCID:2A9B6WA-G1 PreseedJapanCorporation(“theapplicant”)certifiesthat,asofthedateofthefilingoftheapplication, theapplicantisnotidentifiedontheCoveredList,establishedpursuantto§1.50002ofreference chapter,asanentityproducing“covered”communicationequipment.Theequipmentforwhich authorizationissoughtisnot“covered”telecommunicationsequipmentandvideosurveillance equipmentproducedbyentitiesidentifiedontheCommission’sCoveredListthatprohibitedfrom receivinganequipmentauthorizationpursuanttosection§2.903oftheFCCrules. Sincerelyyours, ApplicantSignature PrintedName:XianjunBai Title:Manager Address:3FKita-sandoDTBldg.,4-16-7Sendagaya,ShibuyaKu,Tokyo,151-0051,Japan Tel.:+81-3-6822-0119 Email:[email protected]

PreseedJapanCorporation 3FKita-sandoDTBldg.,4-16-7Sendagaya,ShibuyaKu,Tokyo,151-0051,Japan 1|Page AttestationStatements To:FederalCommunicationsCommissionDate:December12,2025 7435OaklandMillsRoad, Columbia,MD21046,USA Subject:AttestationofCompliancewithFCCCoveredListSoftwareRequirements FCCID:2A9B6WA-G1 ProductName:BluetoothHeadphones Thisletterservesasanattestationthattheequipmentidentifiedabove☐is/☒isnot(selectone)"covered" softwareasdefinedundertheFederalCommunicationsCommission(FCC)CoveredListrequirements,as outlinedinFCC22-84andKDB986446. Specifically,theundersignedcertifiesthattheequipmentforwhichauthorizationissought: 1.Doesnotcontaincybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab, Inc.oranyofitssuccessors,assignees,parents,subsidiaries,affiliates,oranyentitythathasrebranded orrelabeledsoftwareproducedbytheaforementionedentities. 2.Doesnothavethecapabilitytostore,run,ordeliveranysoftwareidentifiedontheFCCCoveredList, includingbutnotlimitedtocybersecurityandanti-virussoftware. Tosupportthisattestation,theappendixevaluationdocumentationhasbeenpreparedandisincludedinthe certificationfiling. Thisattestationisbasedonathoroughevaluationofthedevice'sdesign,functionality,andsoftware environment.Theundersignedaffirmsthattheinformationprovidedisaccurateandcompletetothebestof theirknowledge. Sincerelyyours, ApplicantSignature PrintedName:XianjunBai Title:Manager Address:3FKita-sandoDTBldg.,4-16-7Sendagaya,ShibuyaKu,Tokyo,151-0051,Japan Tel.:+81-3-6822-0119 Email:[email protected] PreseedJapanCorporation 3FKita-sandoDTBldg.,4-16-7Sendagaya,ShibuyaKu,Tokyo,151-0051,Japan 2|Page EvaluationregardingtotheCoveredListSoftware: Compliance Methodology EvaluationProcessResults Deviceis Inherent compliance ☒ TheChipset(s)usedislimitedtorun theCybersecurityoranti-virus software. Compliance ☒ TheMemoryusedislimitedtorunthe Cybersecurityoranti-virussoftware. Compliance ☒ Thereisstoragecapacitylimitationfor storeorinstalltheCybersecurityor anti-virussoftware. Compliance ☒ Operatingsystemusedislimitedto run,installordelivertheCybersecurity oranti-virussoftware. Compliance Deviceisnot Inherent compliance ☐ EvaluationBasedonSoftware BillofMaterials(SBoM) Seeattached“SBoM“ Note:TheSBoMcontentislimited tothescopeofcoveredlist software(e.g.antivirusand cybersecuritysoftware). ☐ EvaluationBasedonScanfor Softwareonthedevice ☐ EvaluationBasedonFilesystemscan ☐ EvaluationBasedonRunning softwarecheck

PreseedJapanCorporation 3FKita-sandoDTBldg.,4-16-7Sendagaya,ShibuyaKu,Tokyo,151-0051,Japan Date:Nov.24,2025 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 FCCID:2A9B6WA-G1 USAgent–AttestationStatement/Part2.911(d)(7) [PreseedJapanCorporation]certifies,thatasof[Nov.24,2025],wehavedesignatedFCCUS Agent,LLCtoacceptserviceofprocessonourbehalfforFCCID:2A9B6WA-G1. [PreseedJapanCorporation],acceptstomaintainanagentofserviceofprocessintheUnited Statesfornolessthanoneyearaftereitherthegranteehaspermanentlyterminatedallmarketing andimportationoftheapplicableequipmentwithintheU.S.,ortheconclusionofanyCommission- relatedadministrativeorjudicialproceedinginvolvingtheequipment,whicheverislater. FCCUSAgent,LLC,acceptsasofthedateofthefilingofthisapplication,theobligationofbeing thedesignatedagentforthepurposeofacceptingserviceofprocessonbehalfof[PreseedJapan Corporation]forFCCID:2A9B6WA-G1. DesignatedAgentInformation: CompanyName:FCCUSAgent,LLC FRN:0033402884 Address:3722IllinoisAvenue,SaintCharles,IL,60174,USA ContactPerson:TimPayne Phone:708-571-3148 Email:[email protected] Sincerely, Company:PreseedJapanCorporationDesignatedAgent:FCCUSAgent,LLC CompanyRepresentative:XianjunBai FRN:0033079229 Tel:+81-3-6822-0119 Email:[email protected] DesignatedAgentRepresentative:TimPayne Signature:Signature:

PreseedJapanCorporation 3FKita-sandoDTBldg.,4-16-7Sendagaya,ShibuyaKu,Tokyo,151-0051,Japan OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:Nov.24,2025 Subject;RequestforConfidentiality FCCID:2A9B6WA-G1 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram OperationalDescription PartsList Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:XianjunBai Title:Manager

Preseed Japan Corporation 3F Kita-sando DT Bldg., 4-16-7 Sendagaya, Shibuya Ku, Tokyo, 151-0051, Japan Nov. 24, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2A9B6WA-G1 I, the undersigned, hereby authorize (Attestation of Global Compliance (Shenzhen) Co., Ltd) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Attestation of Global Compliance (Shenzhen) Co., Ltd) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with Preseed Japan Corporation. We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) Full name of contact person listed on FCC’s website: Xianjun Bai Title: Manager Tel:+81-3-6822-0119 Email: [email protected]

Report No.: AGC12877251001AP03 Page 1 of 5 EXTERNAL PHOTOS WHOLE VIEW OF EUT TOP VIEW OF EUT Report No.: AGC12877251001AP03 Page 2 of 5 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC12877251001AP03 Page 3 of 5 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC12877251001AP03 Page 4 of 5 RIGHT VIEW OF EUT Report No.: AGC12877251001AP03 Page 5 of 5 OPEN VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 15mm*20mm FCC ID:2A9B6WA-G1

Report No.: AGC12877251001AP03 Page 1 of 4 INTERNAL PHOTOS INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) Report No.: AGC12877251001AP03 Page 2 of 4 INTERNAL VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC12877251001AP03 Page 3 of 4 INTERNAL VIEW OF EUT (FIGURE 4) Internal view-5 of EUT BT Antenna Report No.: AGC12877251001AP03 Page 4 of 4 Internal view-6 of EUT BATTERY VIEW OF EUT -----End of Report-----

Page 1 of 10 RF Exposure Report Report No.: AGC12877251001FH01 FCC ID : 2A9B6WA-G1 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Bluetooth Headphones BRAND NAME : AVIOT MODEL NAME : WA-G1 APPLICANT : Preseed Japan Corporation DATE OF ISSUE : Nov. 22, 2025 STANDARD(S) : FCC Part 2 Subpart J §2.1093 FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC12877251001FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Nov. 22, 2025 Valid Initial Release Report No.: AGC12877251001FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Measurement Results ..................................................................................................................................... 9 6. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC12877251001FH01 Page 4 of 10 1. General Information Applicant Preseed Japan Corporation Address 3F Kita-sando DT Bldg., 4-16-7 Sendagaya, Shibuya Ku, Tokyo, 151-0051, Japan Manufacturer Preseed Japan Corporation Address 3F Kita-sando DT Bldg., 4-16-7 Sendagaya, Shibuya Ku, Tokyo, 151-0051, Japan Factory Dongguan Roker Electronics Co., Limited Address 9 Floor, B Building Guanghui Building, Dongzheng Road, Changping Town, Dongguang City, Guangdong Province, 523570, China Product Designation Bluetooth Headphones Brand Name AVIOT Test Model WA-G1 Series Model(s) N/A Difference Description N/A Date of receipt of test item Oct. 20, 2025 Date of Test Oct. 20, 2025~ Nov. 22, 2025 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Thea Huang (Project Engineer) Nov. 22, 2025 Reviewed By Bibo Zhang (Reviewer) Nov. 22, 2025 Approved By Angela Li (Authorized Officer) Nov. 22, 2025 Report No.: AGC12877251001FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version V2.0 Software Version V005 Modulation Type BR GFSK, EDR π /4-DQPSK, 8DPSK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PCB Antenna Antenna Gain 4.97dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC12877251001FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC12877251001FH01 Page 7 of 10 3.3 Environmental Conditions Normal Conditions Temperature range (°C) 15 - 35 Relative humidity range 20 % - 75 % Pressure range (kPa) 86 - 106 Power supply DC 3.7V by battery or DC 5V by adapter Report No.: AGC12877251001FH01 Page 8 of 10 4. Portable…

Text truncated - open the document above for the full version.

Customer 新联芯 Project R1175 Antenna Revision A0 Prepared by 18814303605 Checked by Date : 2025.10.24 Antenna Test Report Sequence Number Test Item equipment S parameter VSWR Agilent 5071C & Agilent 5071B OTA TestTRP&TIS Agilent8960 & CMW500 STIMO Gain & Efficiency Gain & Efficiency SATIMO Agilent 5071C 2.TestSystem Purpose This report is to measure the performance of antenna for R1175 The antenna operating frequency at 2400MHz0-2500MHz 。 All test data are showed as below. Content 1.Product Overview & Dimension 2.Test system 3.Test Result 3.1 S11 Parameter 3.2 Gain & Efficiency 3.3 2D Pattern 4. OTA 4.1Test Result 4.2 2D Pattern Frequency (MHz) 2400245024802500 VSWR 3.402.762.382.12 3.1Test Result 1 .S11 Parameter-VSWR Frequency (MHz) 2400245024802500 Log Mag -5.25-6.58-7.75-8.85 3.1Test Result 2. S11 Parameter-Log Mag Frequency (MHz) 2400245024802500 Smi th(Ω ) 14.9119.2622.7925.62 3.1Test Result 3 .S11 Parameter-Smi th Frequency (MHz) Efficiency (%) Peak GAIN (dBi) 2400 32.13% 2.45 2410 33.87% 3.13 2420 36.09% 3.73 2430 37.46% 3.93 2440 38.36% 3.93 2450 40.46% 4.24 2460 41.72% 4.50 2470 43.44% 4.77 2480 44.13% 4.97 3.2 Test Result 1 Gain & Efficiency——ANT 3 .3 Test Result 1 2D Pattern——BTANT 3 .3 Test Result 2 2D Pattern——BT ANT 3 .3 Test Result 3 2D Pattern——BT ANT Test Equipment： R&S CMW500 Test Condition： 2D chamber BandChannel TRP(dBm)TIS(dBm) BT 0 3.35-89.06 39 3.72-87.24 78 5.01-88.32 4.1 OTA Data 4.2 Test Result 1 2D Pattern——BTANT TRP 4.2 Test Result 2 2D Pattern——BTANT TIS

Page 1 of 80 FCCTestReport ReportNo.:AGC12877251001FR01 FCCID: 2A9B6WA-G1 APPLICATIONPURPOSE: OriginalEquipment PRODUCTDESIGNATION: BluetoothHeadphones BRANDNAME: AVIOT MODELNAME: WA-G1 APPLICANT: PreseedJapanCorporation DATEOFISSUE: Nov.22,2025 STANDARD(S):FCCPart15SubpartC§15.247 REPORTVERSION:V1.0 AttestationofGlobalCompliance(Shenzhen)Co.,Ltd ReportNo.:AGC12877251001FR01 Page2of80 ReportReviseRecord ReportVersionReviseTimeIssuedDateValidVersionNotes V1.0/ Nov.22,2025 ValidInitialRelease ReportNo.:AGC12877251001FR01 Page3of80 TableofContents 1.GeneralInformation..........................................................................................................................................5 2.ProductInformation..........................................................................................................................................6 2.1ProductTechnicalDescription....................................................................................................................6 2.2TestFrequencyList.....................................................................................................................................6 2.3RelatedSubmittal(S)/Grant(S).................................................................................................................7 2.4TestMethodology........................................................................................................................................7 2.5ReceiverInputBandwidth...........................................................................................................................7 2.6EquallyAverageUseofFrequenciesandBehaviour.................................................................................7 2.7PseudorandomFrequencyHoppingSequence.........................................................................................8 2.8SpecialAccessories....................................................................................................................................9 2.9EquipmentModifications.............................................................................................................................9 2.10AntennaRequirement...............................................................................................................................9 3.TestEnvironment............................................................................................................................................10 3.1AddressofTheTestLaboratory................................................................................................................10 3.2TestFacility................................................................................................................................................10 3.3EnvironmentalConditions.........................................................................................................................11 3.4MeasurementUncertainty.........................................................................................................................11 3.5ListofEquipmentUsed.............................................................................................................................12 4.SystemTestConfiguration.............................................................................................................................14 4.1EUTConfiguration....................................................................................................................................14 4.2EUTExercise............................................................................................................................................14 4.3ConfigurationofTestedSystem................................................................................................................14 4.4EquipmentUsedinTestedSystem..........................................................................................................15 4.5SummaryofTestResults..........................................................................................................................16 5.DescriptionofTestModes.............................................................................................................................17 6.RFOutputPowerMeasurement....................................................................................................................19 6.1ProvisionsApplicable................................................................................................................................19 6.2MeasurementProcedure..........................................................................................................................19 6.3MeasurementSetup(BlockDiagramofConfiguration)...........................................................................19 6.4MeasurementResult.................................................................................................................................20 7.20dBBandwidthand99%OccupiedBandwidthMeasurement...............................................................26 7.1ProvisionsApplicable................................................................................................................................26 7.2MeasurementProcedure..........................................................................................................................26 7.3MeasurementSetup(BlockDiagramofConfiguration)...........................................................................26 7.4MeasurementResults...............................................................................................................................27 8.ConductedBandEdgeandOut-of-BandEmissions..................................................................................32 8.1ProvisionsApplicable..............................................................................................................................…

Text truncated - open the document above for the full version.

ReportNo.:AGC12877251001FR01 Page44of80 Test_Graph_EDR_ANT1_2402_3Mbps_HigherBandEmissions Test_Graph_EDR_ANT1_2441_3Mbps_ReferenceLevel ReportNo.:AGC12877251001FR01 Page45of80 Test_Graph_EDR_ANT1_2441_3Mbps_LowerBandEmissions Test_Graph_EDR_ANT1_2441_3Mbps_HigherBandEmissions ReportNo.:AGC12877251001FR01 Page46of80 Test_Graph_EDR_ANT1_2480_3Mbps_ReferenceLevel Test_Graph_EDR_ANT1_2480_3Mbps_LowerBandEmissions ReportNo.:AGC12877251001FR01 Page47of80 Test_Graph_EDR_ANT1_2480_3Mbps_HigherBandEmissions ReportNo.:AGC12877251001FR01 Page48of80 TestGraphsofBandEdgeEmissionsinNon-RestrictedFrequencyBands Test_Graph_BR_ANT1_2402_1Mbps_LowerBandEdgeEmissions Test_Graph_BR_ANT1_2480_1Mbps_HigherBandEdgeEmissions ReportNo.:AGC12877251001FR01 Page49of80 Test_Graph_BR_HOP_ANT1_NA_1Mbps_LowerBandEdgeEmissions Test_Graph_BR_HOP_ANT1_NA_1Mbps_HigherBandEdgeEmissions ReportNo.:AGC12877251001FR01 Page50of80 Test_Graph_EDR_ANT1_2402_2Mbps_LowerBandEdgeEmissions Test_Graph_EDR_ANT1_2480_2Mbps_HigherBandEdgeEmissions ReportNo.:AGC12877251001FR01 Page51of80 Test_Graph_EDR_HOP_ANT1_NA_2Mbps_LowerBandEdgeEmissions Test_Graph_EDR_HOP_ANT1_NA_2Mbps_HigherBandEdgeEmissions ReportNo.:AGC12877251001FR01 Page52of80 Test_Graph_EDR_ANT1_2402_3Mbps_LowerBandEdgeEmissions Test_Graph_EDR_ANT1_2480_3Mbps_HigherBandEdgeEmissions ReportNo.:AGC12877251001FR01 Page53of80 Test_Graph_EDR_HOP_ANT1_NA_3Mbps_LowerBandEdgeEmissions Test_Graph_EDR_HOP_ANT1_NA_3Mbps_HigherBandEdgeEmissions ReportNo.:AGC12877251001FR01 Page54of80 9.RadiatedSpuriousEmission 9.1MeasurementLimit  15.209Limitinthebelowtablehastobefollowed Frequencies (MHz) FieldStrength (microvolts/meter) MeasurementDistance (meters) 0.009~0.4902400/F(kHz)300 0.490~1.70524000/F(kHz)30 1.705~30.03030 30~881003 88~2161503 216~9602003 Above9605003 Note:Allmodesweretestedforrestrictedbandradiatedemission,th…

Text truncated - open the document above for the full version.