2A9BA-FRFA23JOFROMIS9 OFFICIAL LIGHT STICK

QUICK START GUIDE Inserting and Replacing the Batteries 1. Turn the bottom CAP of the handle to take out the battery housing inside. 2. Insert 3 batteries (AAA) into the housing as shown in the diagram. (Check to make sure the +/- positions are correct, when inserting batteries.) ※ The contact with the spring is the -, without the spring is the + side. 3. Insert the batteries inserted housing into the direction of the arrow, which is marked on the handle of the product, and close the bottom CAP. Instructions for Use 1. Switching ON/OFF : Press BUTTON 1 for 1.5 seconds. [The light stick is in concert mode, when power is turned on for the first time] 2. Bluetooth mode ON/OFF · Press BUTTONS 1,2 simultaneously for 1.5 seconds to connect smartphone with Bluetooth. [The light stick lights up in blue, when it changes to Bluetooth mode.] 3. Basic Mode [Concert Mode] · Press BUTTON 1 briefly to change the light stick color. · Press and hold BUTTON 1 to turn off the light stick. · Press BUTTON 2 briefly to change the flashing speed of the light stick. [Slow > Normal > Quick] · Press and hold BUTTON 2 to change to G-Sensor mode. 4. G-Sensor Mode · Shake the light stick to change the color of the light stick. · Press and hold BUTTON 1 to turn off the light stick. · Press and hold BUTTON 2 to change to Basic mode. * For wireless control of the light stick in the concert hall, match the ticket information, by pairing the light stick with your smartphone. * Since the connection between the smartphone and Bluetooth is wireless, the connection may be intermittently disconnected during use. *If you have trouble pairing your smartphone with the light stick, please visit the HELP DESK (Pairing Booth) *Bluetooth only supports BLUETOOTH 4.2 or higher. Precautions 1. Avoid high temperature and high humidity, and keep at room temperature when storing. 2. Avoid looking directly at the LED light. 3. Please note that dropping the product or forcibly applying shock may affect LED color. 4. Be careful not to swallow the parts or put them in your mouth. 5. Be careful not to give strong impact to the product or contact with water. 6. Stop using the product if it is damaged, and do not modify or disassemble the product. 7. Please use new battery when the battery life is over and remove the battery when it is not used for a long time. 8. Keep batteries out of the reach of children or infants, or dispose of them at the designated disposal site. 9. Always use genuine AAA batteries and check +, - when inserting batteries. Failure to do so may result in product damage, burn and fire. 10. This product may be interrupted during wireless operation. Product Warranty 1. This product is manufactured through strict quality control and inspection process. 2. We will repair the product during the warranty period if the product breaks down under normal usage. 3. Be sure to present this warranty when requesting repair. 4. Warranty is valid only in Korea. 5. The warranty period is three months from the date of purchase. *Consumer negligence and malfunction are not covered by repair service. Customer Paid Repair 1. If the warranty period has expired. 2. In case of malfunction or damage due to negligence or negligence in use. 3. Failure due to natural disasters such as flood, fire or earthquake. 4. If you want to replace the case with scratches during use, 5. Any use of customer center other than the official customer center, or any disassembly, repair or modification of the product Product Specification NAME : FROMIS9 OFFICIAL LIGHT STICK VER.1 MODEL: FRFA23JO900NN0 SIZE : 220 X 118 X 42 (mm) WEIGHT : 149g MATERIAL : ABS , PC COMPONENTS :Light Stick, Nonwoven bags, Straps, User manual, Photo Card POWER : 3 Alkaline AAA Batteries (Recommended), DC 4.5V CERTIFICATIONS (KC) : ------ OPERATION TEMPERATURE : 0ºC - 50ºC (32ºF - 122ºF) Customer Service Center Address, Contact and E-mail : Big Hit IP Co., Ltd : 02-3444-0150 : light- [email protected] Warranty period : 3 Month from Date of Purchase (Receipt Authentication Required) This device can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses, radiate radio frequency energy but if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with part15 of FCC rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device and its accessories must accept any interference received, including interference that may cause undesired operation. Product Part15.21 statement Changes or modifications not expressly approved by the manufacturer (or party responsible) for compliance could void the user's authority to operate the equipment.

ELCOMTEC CO., LTD. 231, Dongbu-daero, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do, Republic of Korea Tel: +82-31-201-7795 / Fax: +82-31-201-7800 Date: November 25, 2022 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2A9BA-FRFA23JO Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: PERMANENT Exhibit Type File Name Part List Part List.pdf Schematics Diagram(s) Schematic.pdf Operation description Operation description.pdf Block diagram Block diagram.pdf And the above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Gi-Bum, Kang / manager ELCOMTEC CO., LTD.

ELCOMTEC CO., LTD. 231, Dongbu-daero, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do, Republic of Korea Tel: +82-31-201-7795 / Fax: +82-31-201-7800 Date: November 25, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 FCC ID : 2A9BA-FRFA23JO To whom it may concern: I, the undersigned, hereby authorize Young-Jin, Lee of KES Co., Ltd. and hereafter referred to as KES Co., Ltd., to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Young-Jin, Lee of KES Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing KES Co., Ltd. as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; ELCOMTEC CO., LTD. 231, Dongbu-daero, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do, Republic of Korea Tel: +82-31-201-7795 / Fax: +82-31-201-7800 h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Gi-Bum, Kang / manager ELCOMTEC CO., LTD. REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

Model No.: FRFA23JOS900NN0 Page 1 of 2 External photo Model No.: FRFA23JOS900NN0 Page 2 of 2 External photo

* Label information This number will be change, after certification. 5 phi (mm) 12.8mm 34mm

Model No.: FRFA23JOS900NN0 Page 1 of 1 Internal photos PCB PATTERN Antenna

KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Report No.: KES-EM-22T0965 Page (1) of (29) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected] KES-QP-7081-06 Rev. 7 KES A4 EMC TEST REPORT Test Report No. : KES-EM-22T0965 Date of Issue : Dec. 06, 2022 Product name : FROMIS9 OFFICIAL LIGHT STICK Model/Type No. : FRFA23JOS900NN0 Variant Mode : - Applicant : ELCOMTEC CO., LTD. Applicant Address : 231, Dongbu-daero, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do, Republic of Korea Manufacturer : ELCOMTEC CO., LTD. Manufacturer Address : 231, Dongbu-daero, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do, Republic of Korea FCC ID : 2A9BA-FRFA23JO Date of Receipt : Nov. 03, 2022 Test date : Nov. 29, 2022 Test Results : In Compliance Not in Compliance Tested by Reviewed by Dae Hyun, Kim EMC Test Engineer Dong Hun, Jang EMC Technical Manager KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Report No.: KES-EM-22T0965 Page (2) of (29) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected] KES-QP-7081-06 Rev. 7 KES A4 REPORT REVISION HISTORY Date Test Report No. Revision History Dec. 06, 2022 KES-EM-22T0965 Issued This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. This document may be altered or revised by KES Co., Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by KES Co., Ltd. will constitute fraud and shall nullify the document. KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Report No.: KES-EM-22T0965 Page (3) of (29) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected] KES-QP-7081-06 Rev. 7 KES A4 TABLE OF CONTENTS 1.0 General Product Description.................................................................................... 4 1.1 Test Voltage & Frequency ....................................................................................... 5 1.2 Variant Model Differences ....................................................................................... 5 1.3 Device Modifications .............................................................................................. 5 1.4 Equipment Under Test ............................................................................................ 5 1.5 Support Equipments .............................................................................................. 5 1.6 External I/O Cabling .............................................................................................. 6 1.7 EUT Operating Mode(s) .......................................................................................... 6 1.8 Configuration ........................................................................................................ 7 1.9 Remarks when standards applied ............................................................................ 8 1.10 Calibration Details of Equipment Used for Measurement .............................................. 8 1.11 Test Facility .......................................................................................................... 8 1.12 Measurement Procedure ......................................................................................... 8 1.13 Laboratory Accreditations and Listings ..................................................................... 9 2.0 Test Regulations .................................................................................................. 10 2.1 Conducted Emissions at Mains Power Ports ............................................................. 11 2.2 Radiated Electric Field Emissions(Below 1 ㎓) ......................................................... 13 2.3 Radiated Electric Field Emissions(Above 1 ㎓) ......................................................... 15 APPENDIX A – TEST DATA............................................................................................. 17 Conducted Emissions at Mains Power Ports ................................................................ 17 Radiated Electric Field Emissions(Below 1 ㎓) ............................................................ 19 Radiated Electric Field Emissions(Above 1 ㎓) ............................................................ 21 APPENDIX B - Test Setup Photos and Configuration.......................................................... 25 Radiated Electric Field Emissions(Below 1 ㎓) ............................................................ 26 Radiated Electric Field Emissions(Above 1 ㎓) ............................................................ 28 KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Report No.: KES-EM-22T0965 Page (4) of (29) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected] KES-QP-7081-06 Rev. 7 KES A4 1.0 General Product Description Main…

Text truncated - open the document above for the full version.

KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Report No.: KES-RF1-22T0177 Page ( 40 ) of ( 40 ) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected] KES-QP-7081-06 Rev. 7 KES A4 Appendix B. Test setup photos Radiated N/A The end of test report.