2A9CN-SMC1Aristos Home Wireless Camera B3

Real-time View Take photos in the real-time view interface. You can view and download all the videos from cloud. Settings The detail information of the camera. Set the motion detection and human detection modes. Details in FAQ Share the camera's vision to your families or friends. Details in FAQ Cloud Free basic cloud storage provides easy access to all videos recorded in the last 3 days. If you need more cloud storage you can purchase in the APP or message us to get discount & free. Note: this device does not support audio recording. If you have any question, please feel free to contact us in the APP. How to RESET the camera? Press and hold the Reset Button for 8 seconds until you hear the voice prompt. How to share the device with my family? Open the Aiwit app. From the home page, tap the Share icon. Tap Share via Email or Share via QR Code. You can share the device with up to 8 users. Share via Email: The new user has to download the Aiwit app and create an account with the same email address which the device owner has shared with. Log in to the account and you'll see the shared device. Share via QR Code: 1. Open the Aiwit App on a new user's smartphone. 2. From the home page, tap +. 3.Tap QR Code Sharing, then scan the QR code the device owner generated before. 4. You will see Share successful, then tap Confirm. How many users can view the video at the same time? Up to 3 users may view the video feed, but only 1 user can use the direct intercom. Both ios and Android are compatible. Is 5GHz Wi-Fi supported? No. Only 2.4GHz Wi-Fi is supported. Why is my Wi-Fi signal poor on my device? Your device may be too far away from your wireless router or there may have some obstructions that reduce signal strength in between. You might try repositioning your router or getting a signal extender/repeater for your wireless router. How to adjust Motion Detection Sensitivity? From the home page, tap the Motion Detection icon. Motion Detection Sensitivity • High: Records and notifies you about every tiny change in the camera's vision. Shortest battery life. • Medium: Records and notifies you about motion less often. Standard battery life. • Low: Records and notifies you about motion even less often. Maximum battery life. What is humanoid detection? This setting helps you filter the motion detections only involved with human. Large parameter: Only keep the videos that the system quite sure a human show up. FA QFA QFA Q Monitor, Replay, Settings & Cloud Small parameter: Keep the videos that the system think maybe a human show up. How to use the base? The 3M adhesive on the base only works for glass. Please use the screw if you need to install the camera on wood or wall. Does it support memory card? Micro SD card is not supported for B3 model. If you do feel more comfortable using a memory card, we have the same camera (but different APP) supporting micro SD card. Please contact us for more info. [email protected] [email protected] Thank you for choosing our product. Tech support email: WIDE ANGLE LONG LASTING Camera USBUser Manual Lens Light sensor PIR sensor Reset button Indicator light Power switch USB micro port Screw SetBase APP CONTROL CLOUD SERVICE NIGHT VISION MOTION DETECTION Customer Support: [email protected] In the boxContact Camera Setup Specifications Indicator Light Charging WIRELESS CAMERA B3 USER MANUAL Power supply: DC 5V/1A Charging time: 3-6 hours An adapter used for your phone would usually be good enough. Note: please don't charge it with computer USB port, will be very slow. Red light, on right. Red light flashing when waiting for QR code scanning. Red light will go off after successful connection. Green light on left. Green light on when charging. Green light will go off after fully charged. 1234 6 Connect your camera to APP 1. In Aiwit APP. To add your camera, click the + icon. 2. Select Battery Camera, then B3. 3. Turn on your camera. Tap Next in the APP, then tap Yes. 4. Enter your 2.4GHz Wi-Fi network and the Wi-Fi password, then tap Next (5GHz Wi-Fi is not supported). 5. Use your device camera to scan the QR Code shown on the APP. 6.If you have any question, please feel free to contact us in the APP. 1. Download and install Aiwit App. Scan the QR code below or search for Aiwit on the Apple App Store or Google Play. Download and install the app. 2. Create an Aiwit account. Tech support email: [email protected] Around 4 inches(10 cm) Aiwit Android/iOS App Download APP 5 7 8910 Aristos Home Wireless Camera B3 ASMC001 L: 2.2 × W: 1.5× H: 1.6 in 3.8 oz Black 1080P Wi-Fi 2.4G Hz DC 5V/1A 2200 mAH -4°F ~ +131°F 0~93% RH,No Condensation Name Model Dimensions Net Weight Color Resolution Wireless Protocol Power Supply Lithium battery capacity Working Temperature Working Humidity FCC WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following …

Text truncated - open the document above for the full version.

Shenzhen ZTime Technology Co., Ltd. Agent Authorization Company: Shenzhen ZTime Technology Co., Ltd. Address: No.2107, Building2, Foresea Life Center, Shenzhen, 518128 China Product Name: Aristos Home Wireless Camera B3 Model Number(s): ASMC001 Product Description: Aristos Home Wireless Camera B3 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2022.12.02 Name: Hui Gao Title: Manager Company: Shenzhen ZTime Technology Co., Ltd.

Shenzhen ZTime Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: December 02, 2022 Subject; Request for Confidentiality FCC ID: 2A9CN-SMC1 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Hui Gao Title: Manager

FCC ID: 2A9CN-SMC1 EUT PHOTO(External Photos)

Page 1 of 1 Label and Information FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

FCC ID: 2A9CN-SMC1 EUT PHOTO(Internal Photos) WiFi ANT ※※※※※ END OF REPORT ※※※※※

FCC ID: 2A9CN-SMC1 RF Exposure Evaluation According to 2.1091: Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation This product belongs to mobile device, should be used at least 20cm distance. WiFi mode Mode Output power to antenna (dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11b 12.55 12(±1) 13 19.953 0.003969 1.0 PASS Remark: antenna gain=-1dBi

Report No: SSP22110096A Antenna Test Report Page 1 of 4 Antenna Test Report Test Standard: IEEE 149-1979 Manufacturer: Shenzhen ZTime Technology Co., Ltd. Product Name: 2.4GHz Antenna Model: ASMC001 Report No.: SSP22110096A Tested Date: 2022-11-12 Issued Date: 2022-11-15 Tested By: William Liu (Engineer) Approved By: Lahm Peng (Manager) Prepared By: Shenzhen ZRLK Testing Technology Co., Ltd. 1F, No. 35 Building, Changxing Technology Industrial Park, Yutang Street, Guangming New District, Shenzhen City, Guangdong Province, China Tel.: +86-755-33019599 Fax.: +86-755-33019599 Website: www.zrlklab.com Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen ZRLK Testing Technology Co., Ltd. Report No: SSP22110096A Antenna Test Report Page 2 of 4 1. General Information 1.1 Product Information Manufacturer Manufacturer: Shenzhen ZTime Technology Co., Ltd. Address of Manufacturer: No.2107, Building2, Foresea Life Center, Shenzhen, 518128 China General Description of Antenna Product Name: 2.4GHz Antenna Model No.: ASMC001 Frequency Range: 2412MHz-2462MHz Type of Antenna: Internal Antenna Antenna Gain: -1dBi (Max.) Impedance: 50 ohm Antenna View (17mm*13mm) 1.2 Test Methodology All measurements contained in this report were conducted with standards IEEE 149-1979 for IEEE Standard Test Procedures for Antennas. 1.3 Test Facilities Testing Lab: Shenzhen ZRLK Testing Technology Co., Ltd. All measurement facilities used to collect the measurement data are located at 1F, No. 35 Building, Changxing Technology Industrial Park, Yutang Street, Guangming New District, Shenzhen City, Guangdong Province, China Report No: SSP22110096A Antenna Test Report Page 3 of 4 2. OTA Test 2.1 Gain Frequency Peak Gain (dBi) Polarity 2412MHz -1 Horizontal 2412MHz -1.89 Vertical 2437MHz -2.68 Horizontal 2437MHz -3.05 Vertical 2462MHz -3.53 Horizontal 2462MHz -4.25 Vertical 2.2 Radiation Pattern View Report No: SSP22110096A Antenna Test Report Page 4 of 4

Report N Date of T Date of is To t a l n um Te s t R e su Testing L Address Applican Address Manufac Address Test spe Standard Test proc Non-stan Test Rep Test Rep Master T This devi test (EU T identified This rep o be altered Product Tradema Model/Ty Ratings .. Number. ....... Test ............... ssue ............. mber of page ult ................ Laboratory. . ................... nt's name .. ................... cturer's nam ................... cification: ................... cedure .......... dard test me port Form No port Form(s) TRF ............. ce described T) is in comp in the repor t ort shall not b d or revised name .......... rk ............... ype reference .................... FC FC .................... .................... .................... s ................. .................... .................... .................... .................... .................... me ............... .................... .................... .................... ethod ......... o. ................ ) Originator .................... d above has liance with t h t. be reproduce by ZKT, pers .................... .................... e .................. .................... CC TE CC ID: .... : ZKT-22 ...... Novemb .... : Decemb ..... 59 .... : PASS .... : Shenz h .... : 1/F, No . Avenue .... : Shenz h .... : No.210 7 .... : Shenz h .... : No.210 7 .... : FCC C F ANSI C .... : / .... : N/A .... : TRF-E L .... : ZKT Te s .... : Dated: 2 been tested he FCC requ ed except in f sonal only, an .... : Aristos .... : Aristos .... : ASMC0 .... : DC 3.7 V EST R :2A9C 1124L8838E ber25, 2022 ber 06, 2022 hen ZKT Tec . 101, Buildin , Fuhai Stree hen ZTime T 7, Building2, hen ZTime T 7, Building2, FR Title 47 P 63.10:2013 L-110_V0 sting 2020-07-08 by ZKT, an d uirements. An full, without t nd shall be n s Home Wire Home 001 V bybattery,U REPO CN-SM E to Decembe 2 chnology Co ng B, No. 6, T et, Bao'an Di Technology C Foresea Life Technology C Foresea Life Part 15 Subpa d the test res nd it is applic the written ap noted in the r eless Camer USB 5V Cha Project N RT MC1 er06, 2022 o., Ltd. Tangwei Com istrict, Shenz Co., Ltd. e Center, Sh Co., Ltd. e Center, Sh art C Section ults show tha cable only to pproval of ZK revision of th ra B3 rging No.: ZKT-22 P mmunity Indu zhen, China henzhen, 518 henzhen, 518 n 15.247 at the equipm the tested s KT, this docu he document 1124L8838E Page 1 of 59 ustrial 8128 China 8128 China ment under ample ument may . E 9 Testing p Testing Address Tested b Review e Approve rocedure an Laboratory . .................... y (name + si er (name + si d (name + s i nd testing lo .................... .................... ignature) ..... gnature) ...... ignature) ..... ocation: ............... : ............... : ............... : ............... : ............... : Shenzhen 1/F, No. 10 1 Industrial Av Shenzhen, Jim Liu Jackson Fa Lake Xie ZKT Techno 1, Building B venue, Fuha China ang Project N ology Co., L B, No. 6, Tang ai Street, Bao No.: ZKT-22 P Ltd. gwei Commu o'an District, 1124L8838E Page 2 of 59 unity E 9 1. VERS 2. SUM 2.1 T 2.2 M 3. GEN 3.1 G 3.2 D 3.3 B 3.4 D 3.5EQ 4. EMC 4.1 C 4 4 4 4 4 4 4.2 R 4 4 4 4 4 4 5.RADIA 5.1 T 5.2 T 5.3 D 5.4 T 5.5 E 5.6 T 6.POWE 6.1 A 6.2 T 6.3 D 6.4 T 6.5 E SION MARY OF TEST FACIL MEASUREM ERAL INF GENERAL D DESCRIPTI BLOCK DIG DESCRIPTI QUIPMENT EMISSIO CONDUCTE .1.1 POWE .1.2 TEST P .1.3 DEVIAT .1.4 TEST S .1.5 EUT O .1.6 TEST R RADIATED .2.1 RADI A .2.2 TEST P .2.3 DEVIAT .2.4 TEST S .2.5 EUT O .2.6 TEST R ATED BAN TEST REQU TEST PROC DEVIATION TEST SETU EUT OPERA TEST RESU ER SPECT APPLIED PR TEST PROC DEVIATION TEST SETU EUT OPERA F TEST RE LITY MENT UNC FORMATIO DESCRIPT ON OF TE S GRAM SHO ON OF SU TS LIST FO N TEST ED EMISSIO R LINE CO PROCEDU ATION FROM SETUP OPERATING RESULT EMISSION ATED EMISS PROCEDU ATION FROM SETUP OPERATING RESULTS ND EMISS UIREMENT: CEDURE FROM TE S UP ATING CON ULT TRAL DEN ROCEDUR CEDURE FROM ST A UP ATION CON Ta ESULTS ERTAINTY ON ION OF EU ST MODES OWING THE PPORT UN OR ALL TES ON MEASU ONDUCTED RE M TEST ST G CONDITIO MEASURE SION LIMIT RE M TEST ST G CONDITIO SIONMEAS : ST STANDA NDITIONS NSITY TES RES / LIMIT ANDARD NDITIONS able of Cont Y UT S E CONFIGU NITS(COND ST ITEMS UREMENT D EMISSION TANDARD ONS EMENT TS TANDARD ONS SUREMEN ARD ST tents URATION O DUCTED MO N LIMITS NT Project N OF SYSTEM ODE) No.: ZKT-22 P M TESTED 1124L8838E Page 3 of 59 Page 5 6 7 7 8 8 9 9 10 11 13 13 13 13 13 14 14 15 17 17 17 18 18 19 19 30 30 30 30 31 31 32 34 34 34 34 34 34 E 9 e 6.6 T 7. CHA 7.1 A 7.2 T 7.3 D 7.4 T 7.5 E 7.6 T 8.PEAK 8.1 A 8.2 T 8.3 D 8.4 T 8.5 E 8.6 T 9. CON 9.1 A 9.2 T 9.3 D 9.4 T 9.5 E 9.6 T 10. ANT 11. TES 12. EUT TEST RESU NNEL BAN APPLIED PR TEST PROC DEVIATION TEST SETU EUT OPERA TEST RESU K OUTPUT APPLIED PR TEST PROC DEVIATION TEST SETU EUT OPERA TEST RESU DUCTED APPLICABL TEST PROC DEVIATION TEST SETU EUT OPERA TEST RESU TENNA RE ST SETUP T CONSTR ULT NDWIDTH ROCEDUR CEDURE FROM ST A UP ATION CON ULT T POWER ROCEDUR CEDURE FROM ST A UP ATION CON ULT BAND ED LE STANDA CEDURE FROM ST A UP ATION CON ULTS EQUIREME PHOTO RUCTIONA H& 99% OC RES / LIMIT ANDARD NDITIONS TEST RES/LIMIT ANDARD NDITIONS DGE AND S ARD ANDARD NDITIONS ENT AL DETAIL CCUPY BA SPURIOUS LS ANDWIDT S EMISSIO Project N H ON No.: ZKT-22 P 1124L8838E Page 4 of 59 35 43 43 43 43 43 43 44 49 49 49 49 49 49 50 51 51 51 51 51 51 51 58 59 59 E 9 1. VERSION Re ZKT-2 N eportNo. 221124L8838 8E Version Rev.01 Desc Initial issu Project N cription ue of report No.: ZKT-22 P D 1124L8838E Page 5 of 59 Approved December06, 2022 E 9 , 2. SUMMAR Te s t p r o c FCC p FC FCC p FCC p FCC FCC FCC p NOTE: (1) ” RY OF TEST cedures acco Standard Section art 15.203/15 (c) CC part 15.20 part 15.247 ( part 15.247 ( C part 15.247 C part 15.247 art 15.205/15 ” N/A” denote T RESULTS ording to the 5.247 07 A b)(3) a)(2) (e) 7(d) 5.209 es test is not technical sta FCC Par Anten AC Power Lin Conducted Channel Ba Power B Spur t applicable i andards: rt15 (15.247) Tes…

Text truncated - open the document above for the full version.

EUT TEST PHOTO FCC ID: 2A9CN-SMC1 Radiated band emission (30MHz-1GHz): Conducted emission: Radiated band emission (Above 1GHz):