2A9HV-RAT001DONGLEdongle

Rev 1/26/2023 JinXuan Electronics (Hong Kong) Company Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-29-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2A9HV-RAT001DONGLE [JinXuan Electronics (Hong Kong) Company Limited] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [JinXuan Electronics (Hong Kong) Company Limited] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Ada jiang Rev 1/26/2023 JinXuan Electronics (Hong Kong) Company Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-29-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A9HV-RAT001DONGLE [JinXuan Electronics (Hong Kong) Company Limited] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Ada jiang

JinXuan Electronics (Hong Kong) Company Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: August 29, 2026 SUBJECT: FCC ID: 2A9HV-RAT001DONGLE To Whom It May Concern: I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements: 1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the User’s Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, JinXuan Electronics (Hong Kong) Company Limited Ada jiang

Rev11/20/07 JinXuanElectronics(HongKong)CompanyLimited FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID: 2A9HV-RAT001DONGLE . PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName* SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNII devices SCH.pdf OP.pdf Blockdiagram.pdf Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrant forthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,wealsorequest temporaryconfidentialtreatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName* ExternalPhotos TestSetupPhotos InternalPhotos UserManual Sincerely, Adajiang Date:08-29-2026

JinXuan Electronics (Hong Kong) Company Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: August 31, 2026 SUBJECT: FCC ID: 2A9HV-RAT001DONGLE To Whom It May Concern: We, the undersigned, hereby authorize Alex wang at Shenzhen BANTEK Testing Co., Ltd. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by __Shenzhen BANTEK Testing Co., Ltd. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Ada jiang

Report No.: BTEK260610008A02E01 Page: 1 of 4 Appendix EUT Photos for BTEK260610008A02E01 Report No.: BTEK260610008A02E01 Page: 2 of 4 EUT Constructional Details (EUT Photos) EUT View 1 EUT View 2 EUT View 3 Report No.: BTEK260610008A02E01 Page: 3 of 4 EUT View 4 EUT View 5 EUT View 6 Report No.: BTEK260610008A02E01 Page: 4 of 4 EUT View 7

Report No.: BTEK260610008A02E01 Page: 1 of 1 LABEL AND LOCATION FCC ID: 2A9HV-RAT001DONGLE

Report No.: BTEK260610008A02E01 Page: 1 of 3 Appendix EUT Photos for BTEK260610008A02E01 Report No.: BTEK260610008A02E01 Page: 2 of 3 EUT Constructional Details (EUT Photos) EUT View 8 EUT View 9 EUT View 10 Report No.: BTEK260610008A02E01 Page: 3 of 3 EUT View 11 EUT View 12 PCB ANT

ReportNo.:BTEK260610008A02E0102 Page: 1 of 5 TESTREPORT ApplicationNo.:BTEK260610008A02E01 Applicant:JinXuanElectronics(HongKong)CompanyLimited AddressofApplicant:ROOM077/FPROSPERCOMMBLDG9YINCHONGSTREETKL Manufacturer:JinXuanElectronics(Shenzhen)Co.,Ltd. AddressofManufacturer:Room901,BlockA,Phase1,GalaxyWorld,LonggangDistrict,Shenzhen City,GuangdongProvince,China EquipmentUnderTest(EUT): EUTName:dongle TestModel.:dongle AddingModel(s):/ TradeMark: 1HORA,,,纷至, FCCID:2A9HV-RAT001DONGLE Standard(s): 47CFRPart2SubpartJSection2.1093 447498D01GeneralRFExposureGuidancev06 DateofReceiptSample(s): 2026-06-25 DateofTest: 2026-06-26to2026-09-03 DateofIssue: 2026-09-03 TestResult: Pass* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove. AlexWang/Approved&Authorized EMCLaboratoryManager ReportNo.:BTEK260610008A02E0102 Page: 2 of 5 RevisionRecord VersionIssueDateRevisionsRemarks V02026-09-03InitialValid Authorizedforissueby: ZoraHuang/FileEditor JuneLi/Reviewer Remarks: Theresultsshowninthistestreportreferonlytothesample(s)tested,thistestreportcannotbe reproduced,exceptinfullwithoutpriorwrittenpermissionofthecompany.Thereportwouldbeinvalidwithout specificstampoftestinstituteandthesignaturesofcompilerandapprover. ReportNo.:BTEK260610008A02E0102 Page: 3 of 5 2Contents Page 1CoverPage......................................................................................................................................................................1 2Contents..........................................................................................................................................................3 3GeneralInformation........................................................................................................................................4 3.1DetailsofE.U.T.........................................................................................................................................4 3.2DescriptionofSupportUnits......................................................................................................................4 3.3TestLocation.............................................................................................................................................4 3.4DeviationfromStandards..........................................................................................................................4 3.5AbnormalitiesfromStandardConditions...................................................................................................4 4TestRequirement............................................................................................................................................5 4.1AssessmentResult.....................................................................................................................................5 ReportNo.:BTEK260610008A02E0102 Page: 4 of 5 3GeneralInformation 3.1DetailsofE.U.T. Powersupply:1.5V⎓10mA15mWfromMOUSEWIRELESS FrequencyRange:2402MHzto2480MHz ModulationType:GFSK NumberofChannels:40 ChannelSpacing:2MHz NumberofChannels:40 AntennaType:PCBAntenna AntennaGain:1.71dBi SampleNo.:BTEK260610008-001 Model(s)Difference Statement SingleModel. Multi-Models: 3.2DescriptionofSupportUnits DescriptionManufacturerModelNo.SerialNo. //// 3.3TestLocation Alltestswereperformedat: ShenzhenBANTEKTestingCo.,Ltd., A5&A6,BuildingB1&B2,No.45GangtouRoad,BogangCommunity,ShajingStreet,Bao'anDistrict, Shenzhen,Guangdong,China518103 Tel:0755-23344200Fax:0755-23344200 FCCRegistrationNumber:264293 DesignationNumber:CN1356 Notestsweresub-contracted. 3.4DeviationfromStandards None 3.5AbnormalitiesfromStandardConditions None ReportNo.:BTEK260610008A02E0102 Page: 5 of 5 4TestRequirement KDB447498D01GeneralRFExposureGuidancev06,Clause4.3.1(b) [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance,mm)]•[√f(GHz)]≤ 3.0 Where -f(GHz)istheRFchanneltransmitfrequencyinGHz -PoweranddistanceareroundedtothenearestmWandmmbeforecalculation -Thetestexclusionsareapplicableonlywhentheminimumtestseparationdistanceis≤50mm,andfor transmissionfrequenciesbetween100MHzand6GHz.Whentheminimumtestseparationdistanceis<5 mm,adistanceof5mmaccordingto4.1f)isappliedtodetermineSARtestexclusion. 4.1AssessmentResult PassedNotApplicable Type Frequency (MHz) Conducted Power(dBm) Maximum Tune-up(dBm) Calculating data LimitResult GFSK24400.8110.393.0Pass Note:Theexposureevaluationsafetydistanceis5mm. -EndoftheReport-

Report No.: BL-SZ2450497-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2024-02-22) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Shenzhen Boyi Innovation Technology Co., Ltd Address: North, 5 / F, Building 3, Tea West, Zone A, Huafeng First Science Park, Hangcheng Street, Baoan District, Shenzhen Equipment Type: SE69D-BYKC(E7EC) A6 97 Model Name: SE69D V11 DICE Brand Name: Boyi scientific and technological innovation Test Standard: IEEE Std 149-2021 Sample Arrival Date: May 14, 2024 Test Date: May 14, 2024 Date of Issue: May 16, 2024 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Mai Jintian Checked by: Xia Long Approved by: Tolan Tu (Testing Director) _______________ _______________ _______________ Report No.: BL-SZ2450497-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2024-02-22) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 May 16, 2024 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 3 1.1 Test Laboratory ..................................................................................................................... 3 1.2 Test Location ......................................................................................................................... 3 2 PRODUCT INFORMATION ......................................................................................................... 4 2.1 Applicant Information ............................................................................................................ 4 2.2 Manufacturer Information ...................................................................................................... 4 2.3 General Description for Equipment under Test (EUT) .......................................................... 4 2.4 Ancillary Equipment .............................................................................................................. 4 2.5 Technical Information ............................................................................................................ 4 3 SUMMARY OF TEST RESULTS ................................................................................................. 5 3.1 Test Standards ...................................................................................................................... 5 3.2 Test Verdict ........................................................................................................................... 5 3.3 Test Uncertainty .................................................................................................................... 5 4 GENERAL TEST CONFIGURATIONS ........................................................................................ 6 4.1 Test Condition ....................................................................................................................... 6 4.2 Test Equipment List .............................................................................................................. 6 4.3 Test Setup ............................................................................................................................. 7 4.4 Test Frequencies .................................................................................................................. 7 ANNEX A TEST RESULTS ............................................................................................................. 8 A.1 Gain and Efficiency ............................................................................................................... 8 ANNEX B RADIATION PATTERN .................................................................................................. 9 ANNEX C TEST SETUP PHOTO ................................................................................................. 12 ANNEX D EUT PHOTO ................................................................................................................ 13 Report No.: BL-SZ2450497-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2024-02-22) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Report No.: BL-SZ2450497-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2024-02-22) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Shenzhen Boyi Innovation Technology Co., Ltd Address North, 5 / F, Building 3, Tea West, Zone A, Huafeng First Science Park, Hangcheng Street, Baoan District, Shenzhen Contact Person Wang Weiyuan Telephone Number 18675575732 E-mail Address [email protected] 2.2 Manufacturer Information Manufacturer Shenzhen Boyi Innovation Technology Co., Ltd Address North, …

Text truncated - open the document above for the full version.

ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page1/33 RFTestReport ForBTEK260610008A02E01 ProjectNo.:BTEK260610008A02E0101 TestConditions: 22.4°C,58%,100.7kPa TestEngineer:Milo TestDate:2026-08-12-2026-09-03 ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page2/33 TestSummary ItemResult DutyCyclePass BandwidthPass MaximumConductedOutputPowerPass CarrierFrequencySeparationPass NumberofHoppingFrequenciesPass TimeofOccupancy(DwellTime)Pass UnwantedEmissionsInNon-restrictedFrequencyBandsPass ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page3/33 1.DutyCycle 1.1TestResult 1.1.1Ant1 Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) DutyCycle (%) DutyCycle CorrectionFactor(dB) Max.DC Variation(%) 2.4GSISO 2402100.000100.000100.000.000.00 2440100.000100.000100.000.000.00 2480100.000100.000100.000.000.00 ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page4/33 1.2TestGraph 1.2.1Ant1 2.4G_LCH_2402MHz_Ant1_NTNV 2.4G_MCH_2440MHz_Ant1_NTNV ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page5/33 ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page6/33 2.4G_HCH_2480MHz_Ant1_NTNV ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page7/33 2.Bandwidth 2.1TestResult 2.1.1OBW Mode TX Type Frequency (MHz) ANT 99%OccupiedBandwidth(MHz) Verdict ResultLimit 2.4GSISO 240211.137/Pass 244011.149/Pass 248011.165/Pass 2.1.220dBBW Mode TX Type Frequency (MHz) ANT 20dBBandwidth(MHz) Verdict ResultLimit 2.4GSISO 240211.248/Pass 244011.266/Pass 248011.265/Pass ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page8/33 2.2TestGraph 2.2.1OBW 2.4G_LCH_2402MHz_Ant1_NTNV 2.4G_MCH_2440MHz_Ant1_NTNV ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page9/33 ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page10/33 2.4G_HCH_2480MHz_Ant1_NTNV ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page11/33 2.2.220dBBW 2.4G_LCH_2402MHz_Ant1_NTNV 2.4G_MCH_2440MHz_Ant1_NTNV ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page12/33 ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page13/33 2.4G_HCH_2480MHz_Ant1_NTNV ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page14/33 3.MaximumConductedOutputPower 3.1TestResult 3.1.1Power Mode TX Type Frequency (MHz) MaximumPeakConductedOutputPower(dBm) Verdict ANT1Limit 2.4GSISO 24020.72<=20.97Pass 24400.81<=20.97Pass 24800.64<=20.97Pass Note1:AntennaGain:Ant1:1.71dBi; ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page15/33 3.2TestGraph 3.2.1Power 2.4G_LCH_2402MHz_Ant1_NTNV 2.4G_MCH_2440MHz_Ant1_NTNV ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page16/33 ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page17/33 2.4G_HCH_2480MHz_Ant1_NTNV ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page18/33 4.CarrierFrequencySeparation 4.1TestResult 4.1.1Ant1 Ant1 Mode TX Type Frequency (MHz) ChannelSeparation (MHz) 20dBBandwidth (MHz) Limit (MHz) Verdict 2.4GSISOHOPP2.0241.266>=1.266Pass ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page19/33 4.2TestGraph 4.2.1Ant1 2.4G_HOPP_Ant1_NTNV ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page20/33 5.NumberofHoppingFrequencies 5.1TestResult 5.1.1HoppNum Mode TX Type Frequency (MHz) NumofHoppingFrequencies Verdict ANT1Limit 2.4GSISOHOPP40>=15Pass ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page21/33 5.2TestGraph 5.2.1HoppNum 2.4G_HOPP_Ant1_NTNV ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page22/33 6.TimeofOccupancy(DwellTime) 6.1TestResult 6.1.1Ant1 Ant1 Mode TX Type Frequency (MHz) Durationof SinglePulse(ms) Observation Period(s) NumofPulsein ObservationPeriod Dwell Time(ms) Limit (ms) Verdict 2.4GSISOHOPP0.1286.800232.944<=400Pass ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page23/33 6.2TestGraph 6.2.1Ant1 2.4G_HOPP_Ant1_NTNV 2.4G_HOPP_Ant1_NTNV ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page24/33 ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page25/33 7.UnwantedEmissionsInNon-restrictedFrequencyBands 7.1TestResult 7.1.1Ref Mode TX Type Frequency (MHz) ANT LevelofReference (dBm) 2.4GSISO 24021-0.83 24401-0.89 24801-1.07 7.1.2CSE Mode TX Type Frequency (MHz) ANT LevelofReference (dBm) Limit (dBm) Verdict 2.4GSISO 24021-0.83-20.83Pass 24401-0.83-20.83Pass 24801-0.83-20.83Pass HOPP1 -0.83-20.83Pass -0.83-20.83Pass ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page26/33 7.2TestGraph 7.2.1Ref 2.4G_LCH_2402MHz_Ant1_NTNV 2.4G_MCH_2440MHz_Ant1_NTNV ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page27/33 ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page28/33 2.4G_HCH_2480MHz_Ant1_NTNV ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page29/33 7.2.2CSE 2.4G_LCH_2402MHz_Ant1_NTNV 2.4G_LCH_2402MHz_Ant1_NTNV ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page30/33 ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page31/33 2.4G_MCH_2440MHz_Ant1_NTNV 2.4G_HCH_2480MHz_Ant1_NTNV ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page32/33 2.4G_HCH_2480MHz_Ant1_NTNV 2.4G_HOPP_Ant1_NTNV ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK260610008A02E0101 Page33/33 2.4G_HOPP_Ant1_NTNV

ReportNo.:BTEK260610008A02E0101 Page: 1 of 29 TESTREPORT ApplicationNo.:BTEK260610008A02E01 Applicant:JinXuanElectronics(HongKong)CompanyLimited AddressofApplicant:ROOM077/FPROSPERCOMMBLDG9YINCHONGSTREETKL Manufacturer:JinXuanElectronics(Shenzhen)Co.,Ltd. AddressofManufacturer:Room901,BlockA,Phase1,GalaxyWorld,LonggangDistrict,Shenzhen City,GuangdongProvince,China EquipmentUnderTest(EUT): EUTName:dongle TestModel.:dongle AddingModel(s):/ TradeMark: 1HORA,,,纷至, FCCID:2A9HV-RAT001DONGLE Standard(s): 47CFRPart15,SubpartC15.247 KDB558074D0115.247MeasGuidancev05r02 ANSIC63.10:2020 DateofReceiptSample(s): 2026-06-25 DateofTest: 2026-06-26to2026-09-03 DateofIssue: 2026-09-03 TestResult: Pass* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove. AlexWang/Approved&Authorized EMCLaboratoryManager ReportNo.:BTEK260610008A02E0101 Page: 2 of 29 RevisionRecord VersionIssueDateRevisionsRemarks V02026-09-03InitialValid Authorizedforissueby: ZoraHuang/FileEditor JuneLi/Reviewer Remarks: Theresultsshowninthistestreportreferonlytothesample(s)tested,thistestreportcannotbe reproduced,exceptinfullwithoutpriorwrittenpermissionofthecompany.Thereportwouldbeinvalidwithout specificstampoftestinstituteandthesignaturesofcompilerandapprover. ReportNo.:BTEK260610008A02E0101 Page: 3 of 29 2TestSummary RadioSpectrumTechnicalRequirement StandardItemMethodRequirementResult 47CFRPart15, SubpartC15.247 AntennaRequirementN/A 47CFRPart15,Subpart C15.203&15.247(b)(4) Pass OtherrequirementsFrequency HoppingSpreadSpectrum SystemHoppingSequence N/A 47CFRPart15,Subpart C15.247(a)(1),(g),(h) Pass RadioSpectrumMatterPart StandardItemMethodRequirementResult 47CFRPart15, SubpartC15.247 ConductedEmissionsatAC PowerLine(150kHz-30MHz) ANSIC63.10:2020 Section6.2 47CFRPart15, SubpartC15.207 N/A ConductedPeakOutputPower ANSIC63.10:2020 Section7.8.5 47CFRPart15, SubpartC15.247(b)(1) Pass 20dBBandwidth ANSIC63.10:2020 Section7.8.6 47CFRPart15,Subpart C15.247(a)(1) Pass CarrierFrequencies Separation ANSIC63.10:2020 Section7.8.2 47CFRPart15,Subpart C15.247a(1) Pass HoppingChannelNumber ANSIC63.10:2020 Section7.8.3 47CFRPart15,Subpart C15.247a(1)(iii) Pass DwellTime ANSIC63.10:2020 Section7.8.4 47CFRPart15,Subpart C15.247a(1)(iii) Pass ConductedBandEdges Measurement ANSIC63.10:2020 Section7.8.7 47CFRPart15,Subpart C15.247(d) Pass ConductedSpurious Emissions ANSIC63.10:2020 Section7.8.7 47CFRPart15,Subpart C15.247(d) Pass RadiatedEmissionswhichfall intherestrictedbands ANSIC63.10:2020 Section7.8.8 47CFRPart15,Subpart C15.205&15.209 Pass RadiatedSpuriousEmissions ANSIC63.10:2020 Section6.3，6.4,6.5,6.6 47CFRPart15,Subpart C15.205&15.209 Pass Note: E.U.T./EUTmeansEquipmentUnderTest. Passmeansthetestresultpassedtheteststandardrequirement,pleasefindthedetaileddecisionruleinthe reportrelativesection. ReportNo.:BTEK260610008A02E0101 Page: 4 of 29 3Contents Page 1CoverPage......................................................................................................................................................................1 2TestSummary.................................................................................................................................................3 3Contents..........................................................................................................................................................4 4GeneralInformation........................................................................................................................................5 4.1DetailsofE.U.T.........................................................................................................................................5 4.2EUTTestModeandTestCondition..........................................................................................................5 4.3DescriptionofSupportUnits......................................................................................................................5 4.4MeasurementUncertainty.........................................................................................................................6 4.5TestLocation.............................................................................................................................................6 4.6DeviationfromStandards..........................................................................................................................6 4.7AbnormalitiesfromStandardConditions...................................................................................................6 5EquipmentList................................................................................................................................................7 6RadioSpectrumTechnicalRequirement.....................................................................................................9 6.1AntennaRequirement................................................................................................................................9 6.1.1TestRequirement:..............................................................................................................................9 6.1.2Conclusion.........................................................................................................................................9 6.2OtherrequirementsFrequencyHoppingSpreadSpectrumSystemHoppingSequence......................10 6.2.1TestRequirement:...........................................................................................................................10 6.2.2Conclusion.......................................................................................................................................11 7RadioSpectrumMatterTestResults..........................................................................................................13 7.1ConductedPeakOutputPower...............................................................................................................13 7.1.1TestSe…

Text truncated - open the document above for the full version.

Report No.: BTEK260610008A02E01 Page: 1 of 2 Appendix Setup Photos For BTEK260610008A02E01 Report No.: BTEK260610008A02E01 Page: 2 of 2 Radiated Spurious Emissions (Below 1GHz) Radiated Spurious Emissions (Above 1GHz)