2A9IJ-CD14FCBBattery Operated Light Bar Color Changing 12in Wireless 100lm

BATTERY INSTALLATION: Open the battery compartment on the back of the light by sliding the back cover in the direction of the arrow. Insert 6 AA batteries, noting polarity. Replace cover by sliding in opposite direction. REMOTE: NOTE: Remove battery isolation tab for first time use. To replace exhausted battery, unscrew the battery door on the back of the remote. Insert 1 CR2032 battery, noting polarity. Replace the cover and screw back in. REMOTE OPERATION: NOTE: Switch to "RF" for remote control functions (See Fig. 1). 1. On the remote, press the “ON” button to turn the lights on. The default setting is white. 2. Pressing the “FADE” button will slowly cycle through the spectrum of colors. 3. Press the “WHITE” button to switch the lights back to white. 4. Use the “+” and “-” buttons to brighten or dim the lights. 5. The “R,” “G” and “B” buttons stand for red, green and blue. These buttons allow you to either select one of these colors or blend them to select the desired color. a. Hold the “R,” “G” or “B” button for three seconds to go directly to that color b. Press and release the buttons repeatedly to move through the RGB spectrum one color at a time. c. Press and release the R, G and B buttons in any combination to create custom colors. 6. The “SAVE” button allows you to quickly return to your favorite color. Once the desired color is found, hold the “SAVE” button until it flashes. The color will now be easily selectable by pressing the “SAVE” button. 7. The “15,” “30,” “45” and “60” buttons automatically turn the lights off after the number of minutes indicated on the button. MANUAL OPERATION: 1. Move switch to ON position to turn the light on. The only color option in manual operation is white. 2. Move switch to OFF position to turn the light off. MOUNTING INSTRUCTIONS: NOTE: Mounting template is provided under the product. To mount light: Remove battery cover and mount in desired location using screws and the included mounting template or double-sided tape. Reattach light to mounted battery cover. Anchors are included for installing screws in the sheetrock. NOTE: Battery door may remain mounted when changing batteries. Functional range may be adversely affected by one or more of the following factors: weather, radio frequency interference, low battery or obstructions between the transmitter and receiver. FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FCC STATEMENT: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reori ent or relocate the receiving antenna. • Incr ease the separation between the equipment and receiver. • Con nect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Color-Changing Wireless Remote 12" Light Bar 44577, 44578 EnSp Manual 11/20/20 MS v1 Fig. 1 RF ONOFF WHITE 1530 45 60 ++ -- R G B 3 1 2 4 6 5 7 FADE SAVE ©2020 Energizer. Energizer and certain graphic designs are trademarks of Energizer Brands, LLC and related subsidiaries and are used under license by Jasco Products Company, LLC. Contact our U.S.-based Consumer Care at 1-800-654-8483 between 7AM-8PM CST. 90-day warranty. Visit www.byjasco.com for warranty details. MADE IN CHINA/HECHO EN CHINA READ IT OR WATCH IT Read instructions or watch easy-to-follow video. Scan QR code or visit https://byjasco.com/44577i Battery Operated Light Bar, Color Changing remote control INSTALACIÓN DE PILAS: Abra el compartimento de las pilas ubicado en la parte posterior de la luz deslizando la tapa en el sentido de la flecha. Coloque 6 pilas “AA”, según la polaridad. Vuelva a colocar la tapa deslizándola en sentido opuesto. REMOTO: NOTA: Para el primer uso, quite la cinta aislante de la pila. Para cambiar las pilas, desatornille el compartimento ubicado en la parte trasera del control remoto. Coloque 1 pila CR2032, teniendo en cuenta el sentido de la polaridad. Vuelva a colocar la tapa y el tornillo. FUNCIONAMIENTO REMOTO: NOTA: cambie a "RF" para las funciones de control remoto (Ver Fig. 1). 1. En el remoto, presione “ON” para encender las luces. El modo predeterminado es blanco. 2. Al presionar “FADE” se recorre el espectro de colores lentamente. 3. Pr esione “WHITE” para volver al blanco. 4. Use “+” y “-” para subir o bajar las luces. 5. Los botones “R”, “G” y “B” representan los colores rojo (R), verde (G) y azul (B). Estos botones le permiten seleccionar uno de los colores o combinarlos para elegir el color deseado. a. Ma ntenga presionado el botón “R”, “G” o “B” durante tres segund…

Text truncated - open the document above for the full version.

Difference Statement Model：41617-T1, 44577, 44578 All models are the same except the model name. We prepared model 41617-T1 for RF test December 16, 2022 Joseph Tsoi/Director Applicant: NINGBO DONGXING (Cambodia) ELECTRIC CO.,LTD. Address: Chormpul Village, Popal Commune, Tramkak District, Takeo Province, Kingdom of Cambodia

NINGBO DONGXING (Cambodia) ELECTRIC CO.,LTD. 2022-12-13 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Battery Operated Light Bar Color Changing 12in Wireless 100lm / 41617-T1, 44577, 44578 # 2A9IJ-CD14FCB #) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Block Diagram, Schematics, Operational Description) required to be submitted with this application be permanently withheld from public review. i.e. the above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Joseph Tsoi/Director

NINGBO DONGXING (Cambodia) ELECTRIC CO.,LTD. 2022-12-13 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize EMTEK (NINGBO) CO., LTD. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Joseph Tsoi/Director

NINGBO DONGXING (Cambodia) ELECTRIC CO.,LTD. 2022-12-13 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Short Term Confidentiality Request For Battery Operated Light Bar Color Changing 12in Wireless 100lm / 41617-T1, 44577, 44578 # 2A9IJ-CD14FCB # To Whom It May Concern: In accordance with sections 0.457 and 0.459 of CFR 47, Ningbo lianda winch co., ltd. requests short-term Confidentiality of following sections of this application for a period of 180 days after grant is issued. Test setup photos Internal photos User’s manual These documents contain detailed system and equipment descriptions and related information about the product, which Ningbo lianda winch co., ltd considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, Ningbo lianda winch co., ltd feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Joseph Tsoi/Director

External photos: ---The End---

Label Location Model: 41617-T1 FCC ID: 2A9IJ-CD14FCB

Internal photos: ---The End--- Antenna

Report No.EDG2211150176E00901R Page 1 of 28 Ver.1.0 TEST REPORT $二维码$ Product Name : Battery Operated Light Bar Color Changing 12in Wireless 100lm Model Number : 41617-T1, 44577, 44578 FCC ID : 2A9IJ-CD14FCB Prepared for : NINGBO DONGXING (Cambodia) ELECTRIC CO.,LTD. Address : ChormpulVillage,PopalCommune,TramkakDistrict,TakeoPr ovince,Kingdom of Cambodia Prepared by : EMTEK (DONGGUAN) CO., LTD. Address : -1&2F., Building 2, Zone A, Zhongda Marine Biotechnology Research and Development Base, No. 9, Xincheng Avenue, Songshanhu High-technology Industrial Development Zone, Dongguan, Guangdong, China Tel : +86-0769-22807078 Fax: +86-0769-22807079 Report Number : EDG2211150176E00901R Date(s) of Tests : November 15, 2022 to December 12, 2022 Date of Issue : December 14, 2022 Report No.EDG2211150176E00901R Page 2 of 28 Ver.1.0 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ............................................................................................................. 3 2 EUT TECHNICAL DESCRIPTION ........................................................................................................... 4 3 SUMMARY OF TEST RESULT ................................................................................................................ 5 4 TEST METHODOLOGY ........................................................................................................................... 6 4.1 GENERAL DESCRIPTION OF APPLIED STANDARDS .................................................................. 6 4.2 MEASUREMENT EQUIPMENT USED ............................................................................................ 6 4.3 DESCRIPTION OF TEST MODES ................................................................................................... 7 4.4 TEST SOFTWARE ........................................................................................................................... 7 5 FACILITIES AND ACCREDITATIONS ..................................................................................................... 8 5.1 FACILITIES ...................................................................................................................................... 8 5.2 LABORATORY ACCREDITATIONS AND LISTINGS ....................................................................... 8 6 TEST SYSTEM UNCERTAINTY .............................................................................................................. 9 7 SETUP OF EQUIPMENT UNDER TEST ............................................................................................... 10 7.1 RADIO FREQUENCY TEST SETUP 1 ........................................................................................... 10 7.2 RADIO FREQUENCY TEST SETUP 2 ........................................................................................... 10 7.3 CONDUCTED EMISSION TEST SETUP ........................................................................................ 11 7.4 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ........................................................... 12 7.5 SUPPORT EQUIPMENT ................................................................................................................ 12 8 TEST REQUIREMENTS ......................................................................................................................... 13 8.1 OCCUPIEDBANDWIDTH .............................................................................................................. 13 8.2 FREQUENCY STABILITY .............................................................................................................. 15 8.3 RADIATED SPURIOUS EMISSION ............................................................................................... 16 8.4 TRANSMISSION REQUIREMEN .................................................................................................. 24 8.5 CONDUCTED EMISSIONS TEST ................................................................................................. 26 8.6 ANTENNA APPLICATION .............................................................................................................. 27 Report No.EDG2211150176E00901R Page 3 of 28 Ver.1.0 1 TEST RESULT CERTIFICATION Applicant : NINGBO DONGXING (Cambodia) ELECTRIC CO.,LTD. Address : ChormpulVillage,PopalCommune,TramkakDistrict,TakeoProvince,Kingdom of Cambodia Manufacturer : NINGBO DONGXING (Cambodia) ELECTRIC CO.,LTD. Address : ChormpulVillage,PopalCommune,TramkakDistrict,TakeoProvince,Kingdom of Cambodia EUT : Battery Operated Light Bar Color Changing 12in Wireless 100lm Model Name : 41617-T1, 44577, 44578 Trademark : N/A Measurement Procedure Used: APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C PASS The above equipment was tested by EMTEK (DONGGUAN) CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10 (2013) and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 2 and Part 15.231 The test results of this report relate only to the tested sample identified in this report. Date of Test : November 15, 2022 to December 12, 2022 Prepared by : Warren deng /Engineer Reviewer : Tim Dong /Supervisor Approved & Authorized Signer : Sam Lv /Manager Report No.EDG2211150176E00901R Page 4 of 28 Ver.1.0 2 EUT TECHNICAL DESCRIPTION Characteristics Description Product: Battery Operated Light Bar Color Changing 12in Wireless 100lm Model Number: 41617-T1, 44577, 44578 Sample Number: 1# Modulation: ASK modulation Operating Frequency: 433.92MHz Number of Channels: 1 channel Max Transmit Power: 63.04dBuV/m Antenna Type : PCB Antenna Antenna Gain: 0.0 dBi Power supply: DC 3V for Battery Temperature Range: -40°C ~ +85°C Date of Received: November 15, 2022 Note: for more details, please refer to th…

Text truncated - open the document above for the full version.

Radiated ---The End---