2A9LX-SOUNDBODYIOT Grip

Introducing Soundbody GRIP Thegriptrainingandhandmovementdevicewhich canmeasurethegripstrength,HRV,andformulate gripstrengthtrainingplan. Weprovidehardware(griptrainingdevice)and software(funandengagingtraininggames). How to Use Soundbody Grip •Easy to set up and use •Fun games and Exercises Easy to set up and use Thegriptrainingandhandmovement deviceconnectsseamlesslyvia Bluetoothtoyourexistingmobile. Thedeviceitselfitlightandfitsinone handandfeaturesaneasytogrip design,evenforuserswithlowhand dexterity. Fun games and Exercises Onceconnected,theuserisableto accessgamesandexercisesthrough theBioHealthCoresoftwareplatform. Thegamesaredesignedtobefunand engagingwhilealsotrainingthe user’supperbodystrengthand endurance. Theusercanalsodoaseriesoftests, suchasthegripstrengthtest,to evaluatetheircurrentfitnesslevel. SoundbodyGrip+Mobile&Tap(Android) 1.Download‘Soundbody’APP 2.ConnectsviaBluetooth ✔ ✔ ❌ ✔ ❌ ❌ ✔ ❌ ✔ ✔ ❌ ❌ 3.MeasuresgripstrengthandHR 4.Trainingwithfungames 5.MornitoringandSavingresults Specifications POWER BATTERY 5v Lithium-Polymer 3.7V 1,200mAh BLE 1M 2 402MHz~2 480MHz CAHRGING TIME4Hours BATTERY LIFE8Hours CHARGING CABLEUSB Type - C INPUTAC220V 60Hz SIZE150mm x 35m/ 200g This product should only be supplied with less than 15W of power. What experts are saying “Born fracture in the hand area -it could be anice wayto rehab. JenniHämäläinen,Doctor “Good way to motivate patients when theyseethe progressionwitha gripstrength.” OonaKivistö,Doctor “Game is agood way for patients to do practices, they needwaystobe motivatedfor a long time” FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. RF Exposure This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment must not be co-located or operating in conjunction with any other antenna or transmitter.

BioHealthCore 153, 8, Hwanggeum-ro, Wonju-si, Gangwon-do, Republic of Korea Date: Dec 22, 2022 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (IOT Grip / Soundbody / 2A9LX- SOUNDBODY) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (below list) required to be submitted with this application be permanently withheld from public review. Permanent Confidential Request -. Schematics -. Block Diagram -. Operational Description SPECIFY REASON FOR REQUEST (i.e. the above documents are company proprietary information that could never get into the possession of your competition). Please contact me if there is any information you may need. Sincerely, Hyo Taek, Lee / CEO

BioHealthCore 153, 8, Hwanggeum-ro, Wonju-si, Gangwon-do, Republic of Korea Date: Dec 22, 2022 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (IOT Grip / Soundbody / 2A9LX- SOUNDBODY) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (below list) required to be submitted with this application be short-term Confidentiality for a period of 180 days after grant is issued. Short-Term Confidential Request -. External Photos -. Internal Photos -. Test set-up photo -. User Manual SPECIFY REASON FOR REQUEST (i.e. These documents contain detailed system and equipment descriptions and related information about the product, which we considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, we feel that this information would be of benefit to our competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Hyo Taek, Lee / CEO

BioHealthCore 153, 8, Hwanggeum-ro, Wonju-si, Gangwon-do, Republic of Korea Date: Dec 22, 2022 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Ms. Chloe Lee/Deputy General Manager of Eurofins KCTL Co.,Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Hyo Taek, Lee / CEO

This document shall not be reproduced, except in full, without the written approval External photos of EUT This document shall not be reproduced, except in full, without the written approval This document shall not be reproduced, except in full, without the written approval

<Label> <Label Location> Product : IOT Grip Model : Soundbody Manufacturer : BioHealthCore Rating : DC 5V/2A (Battery 3.7Vdc) S/N : 2023-0001 Made in Korea FCC ID : 2A9LX-SOUNDBODY Rear

This document shall not be reproduced, except in full, without the written approval Internal photos of EUT This document shall not be reproduced, except in full, without the written approval PCB pattern antenna (BLE) This document shall not be reproduced, except in full, without the written approval This document shall not be reproduced, except in full, without the written approval This document shall not be reproduced, except in full, without the written approval

This test report shall not be reproduced, except in full, without the written approval * RF Exposure FCC ID: 2A9LX-SOUNDBODY 1. Regulation According to the KDB 447498 D01 V06, the following RF exposure evaluation shall to demonstrate RF exposure compliance. Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions. The minimum test separation distance defined in 4.1 f) is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified, typically in the SAR measurement or SAR analysis report, by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting are required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops and tablets, etc. a) For 100 ㎒ to 6 ㎓ and test separation distances ≤ 50 ㎜, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, ㎽) / (min. test separation distance, ㎜)] ꞏ [√f(㎓)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR,30 where ● f(㎓) is the RF channel transmit frequency in ㎓ ● Power and distance are rounded to the nearest ㎽ and mm before calculation ● The result is rounded to one decimal place for comparison ● The values 3.0 and 7.5 are referred to as numeric thresholds in step b) below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 ㎜, and for transmission frequencies between 100 ㎒ and 6 ㎓. When the minimum test separation distance is < 5 ㎜, a distance of 5 ㎜ according to 4.1 f) is applied to determine SAR test exclusion. b) For 100 ㎒ to 6 ㎓ and test separation distances > 50 ㎜, the 1-g and 10-g SAR test exclusion thresholds are determined by the following (also illustrated in Appendix B): 1) {[Power allowed at numeric threshold for 50 ㎜ in step a)] + [(test separation distance – 50 ㎜)ꞏ(f(㎒)/150)]} ㎽, for 100 ㎒ to 1500 ㎒ 2) {[Power allowed at numeric threshold for 50 ㎜ in step a)] + [(test separation distance – 50 ㎜)ꞏ10]} ㎽, for > 1500 ㎒ and ≤ 6 ㎓ c) For frequencies below 100 ㎒, the following may be considered for SAR test exclusion (also illustrated This test report shall not be reproduced, except in full, without the written approval in Appendix C): 1) For test separation distances > 50 ㎜ and < 200 ㎜, the power threshold at the corresponding test separation distance at 100 ㎒ in step b) is multiplied by [1 + log(100/f(㎒))] 2) For test separation distances ≤ 50 ㎜, the power threshold determined by the equation in c) 1) for 50 ㎜ and 100 ㎒ is multiplied by ½ 3) SAR measurement procedures are not established below 100 ㎒. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any SAR test results below 100 ㎒ to be acceptable. 2. Result 2-1. Calculation Result of RF Exposure Mode Test frequency [㎒] Max. tune-up Power [㏈m] Conducted output power [㎽/] Min. test separation distance [㎜] SAR test exclusion thresholds ≤ 7.5 for 10-g SAR BLE/1 Mbps 2 402 -4.00 0.40 5.00 0.12 Note: 1. SAR test exclusion thresholds = [(max. power of channel, including tune-up tolerance, ㎽)/(min. test separation distance, ㎜)] ꞏ [√f(㎓)] = [(0.40)/(5)] ꞏ [√2.402] = 0.12 3. Target power and tolerance, Max tuneup power Mode Target power [㏈m] Tolerance [㏈] Max tuneup power [㏈m] Measured average Power [㏈m] Bluetooth LE_1 Mbps _2 402 ㎒ -4.00 ±1.0 -3.00 -3.12 Bluetooth LE_1 Mbps _2 440 ㎒ -4.00 ±1.0 -3.00 -3.60 Bluetooth LE_1 Mbps _2 480 ㎒ -4.00 ±1.0 -3.00 -4.29 4. RF Exposure Compliance Issue Therefore, EUT is not required the SAR Evaluation.

FrequencyAvg. GainEfficiency [MHz]Θ[Deg]Φ[Deg]Value[dBi]Θ[Deg]Φ[Deg]Value[dBi][dBi][%] 2400.0001052550.02075-30.83-3.6842.87 2420.0001052550.59015-27.85-2.9850.39 2440.0001052550.6900-30.47-2.7453.27 2460.0001202550.4000-25.75-2.8751.64 2485.000120270-0.5315240-20.36-3.5843.90 2. Test Results Horizontal + Vertical Max ValueMin Value Test laboratoryTellestar H Plane Result E1 Plane ResultE2 Plane Result Photo / GraphPhoto / GraphPhoto / Graph Customer Model / RevisionHM-10 (Bluetooth Module 2.4GHz) 원탑테크놀로지 3D Radiation Pattern Measurement Results 1. Informations Date21.04.15 FrequencyAvg. GainEfficiency [MHz]Θ[Deg]Φ[Deg]Value[dBi]Θ[Deg]Φ[Deg]Value[dBi][dBi][%] 2400.00018090-6.9415165-48.05-14.543.52 2420.00018090-5.981590-46.41-13.784.18 2440.00018090-5.4960210-41.82-13.454.52 2460.00018090-5.5130165-50.52-13.484.49 2485.00018090-6.2090180-43.35-14.043.94 FrequencyAvg. GainEfficiency [MHz]Θ[Deg]Φ[Deg]Value[dBi]Θ[Deg]Φ[Deg]Value[dBi][dBi][%] 2400.000105255-0.330300-43.14-4.0539.36 2420.0001052550.260315-56.77-3.3546.20 2440.0001052550.370315-39.66-3.1248.75 2460.0001052550.010300-38.38-3.2747.15 2485.000105255-0.960300-38.02-3.9839.95 Horizontal Max ValueMin Value Vertical Max ValueMin Value FrequencyAvg. GainEfficiency [MHz]Θ[Deg]Φ[Deg]Value[dBi]Θ[Deg]Φ[Deg]Value[dBi][dBi][%] 2400.000105255-2.020105-36.02-6.6021.89 2420.000105255-1.570135-32.50-5.9025.69 2440.000105255-1.510345-42.81-5.6227.40 2460.000105255-1.8800-29.93-5.7226.79 2485.000105255-2.7315240-26.36-6.3523.17 FrequencyAvg. GainEfficiency [MHz]Θ[Deg]Φ[Deg]Value[dBi]Θ[Deg]Φ[Deg]Value[dBi][dBi][%] 2400.00075285-2.94060-37.39-6.7820.98 2420.000105120-2.46060-35.48-6.0724.70 2440.000105120-2.370165-34.91-5.8725.87 2460.000120105-2.630225-41.85-6.0524.84 2485.000120105-3.490135-27.47-6.8420.72 LHCP Max ValueMin Value RHCP Max ValueMin Value Frequency [MHz]Θ[Deg]Φ[Deg]Value[dBi]Θ[Deg]Φ[Deg]Value[dBi] 2400.0001803074.21150451.21 2420.0001807566.91150450.81 2440.00012019579.66150451.32 2460.00015015059.0802401.30 2485.00012019562.59150451.88 AR Max ValueMin Value FrequencyAvg. GainEfficiency [MHz]Θ [Deg]Φ[Deg]Value[dBi]Θ [Deg]Φ[Deg]Value[dBi][dBi][%] 1240090270-0.229030-3.51-2.1261.40 22420902700.239015-2.59-1.5070.79 32440902700.279015-2.21-1.2674.83 42460902850.0290150-2.23-1.3373.62 5248590285-0.8590150-2.90-1.9763.56 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 FrequencyAvg. GainEfficiency [MHz]Θ [Deg]Φ[Deg]Value[dBi]Θ [Deg]Φ[Deg]Value[dBi][dBi][%] 1240090285-8.5090165-27.11-13.404.57 2242090285-7.8090180-28.40-12.785.28 3244090285-7.8290180-29.40-12.545.57 4246090285-8.4290180-32.02-12.775.29 5248590300-9.6490180-43.35-13.614.36 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 H Plane (Vertical + Horizontal) H Plane (Vertical) No Maximum ValueMinimum Value Maximum ValueMinimum Value No FrequencyAvg. GainEfficiency [MHz]Θ [Deg]Φ[Deg]Value[dBi]Θ [Deg]Φ[Deg]Value[dBi][dBi][%] 1240090270-0.839030-3.59-2.4556.84 2242090270-0.3990135-2.76-1.8465.51 3244090270-0.3290135-2.49-1.5969.26 4246090270-0.6090135-2.54-1.6568.34 5248590270-1.3690135-3.22-2.2859.20 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 FrequencyAvg. GainEfficiency [MHz]Θ [Deg]Φ[Deg]Value[dBi]Θ [Deg]Φ[Deg]Value[dBi][dBi][%] 1240090270-2.6690135-8.44-4.9831.77 2242090270-2.0790135-7.91-4.3037.14 3244090270-1.8190135-7.72-3.9540.28 4246090270-2.0990135-7.84-3.9640.19 5248590270-2.8990135-8.72-4.5435.19 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Minimum Value H Plane (RHCP) No Maximum ValueMinimum Value H Plane (Horizontal) No Maximum Value FrequencyAvg. GainEfficiency [MHz]Θ [Deg]Φ[Deg]Value[dBi]Θ [Deg]Φ[Deg]Value[dBi][dBi][%] 1240090105-3.829030-7.81-5.2829.63 2242090105-3.299015-7.16-4.7333.65 3244090105-3.069015-7.15-4.6234.55 4246090105-3.129015-7.38-4.7633.43 5248590105-3.709015-8.13-5.4728.37 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 H Plane (LHCP) No Maximum ValueMinimum Value H Plane (Vertical + Horizontal) Polar Chart H Plane (Vertical) Polar Chart -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 0.5 0 15 30 45 60 75 90 105 120 135 150 165 180 195 210 225 240 255 270 285 300 315 330 345 2400 2420 2440 2460 2485 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 0 15 30 45 60 75 90 105 120 135 150 165 180 195 210 225 240 255 270 285 300 315 330 345 2400 2420 2440 2460 2485 H Plane (Horizontal) Polar Chart H Plane (RHCP) Polar Chart -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 0 15 30 45 60 75 90 105 120 135 150 165 180 195 210 225 240 255 270 285 300 315 330 345 2400 2420 2440 2460 2485 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 0 15 30 45 60 75 90 105 120 135 150 165 180 195 210 225 240 255 270 285 300 315 330 345 2400 2420 2440 2460 2485 H Plane (LHCP) Polar Chart -9 -8 -7 -6 -5 -4 -3 -2 -1 0 0 15 30 45 60 75 90 105 120 135 150 165 180 195 210 225 240 255 270 285 300 315 330 345 2400 2420 2440 2460 2485 FrequencyAvg. GainEfficiency [MHz]Θ [Deg]Φ[Deg]Value[dBi]Θ [Deg]Φ[Deg]Value[dBi][dBi][%] 1240090-90-0.22900-30.66-3.9340.47 2242090-1050.44900-26.57-3.2747.09 3244090-1050.63900-23.83-3.0749.27 4246090-1050.38900-20.74-3.2447.41 5248590-120-0.53900-19.13-3.9939.93 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 FrequencyAvg. GainEfficiency [MHz]Θ [Deg]Φ[Deg]Value[dBi]Θ [Deg]Φ[Deg]Value[dBi][dBi][%] 1240090180-6.949015-36.72-11.956.38 2242090180-5.989015-46.41-11.107.76 3244090180-5.4990-15-31.23-10.758.42 4246090180-5.519030-31.70-10.768.40 5248590180-6.209030-26.98-11.327.38 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 E1 Plane (Vertical + Horizontal) No Maximum ValueMinimum Value E1 Plane (Vertical) No Maximum ValueMinimum Value FrequencyAvg. GainEfficiency [MHz]Θ [Deg]Φ[Deg]Value[dBi]Θ [Deg]Φ[Deg]Value[dBi][dBi][%] 1240090-105-0.78900-39.41-4.6734.09 2242090-105-0.01900-38.64-4.0539.33 3244090-1050.18900-30.53-3.8940.86 4246090-105-0.11900-25.92-4.0939.01 5248590-105-1.06900-24.11-4.8732.55 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 2…

Text truncated - open the document above for the full version.

verify No.535714756923 Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR22-SRF0236 Page (2) of (34) KCTL-TIR001-003/7 (220705) KP22-06294 REPORT REVISION HISTORY Date Revision Page No 2022-12-28 Originally issued - This report shall not be reproduced except in full, without the written approval of Eurofins KCTL Co.,Ltd. This document may be altered or revised by Eurofins KCTL Co.,Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by Eurofins KCTL Co.,Ltd. will constitute fraud and shall nullify the document. This test report is a general report that does not use the KOLAS accreditation mark and is not related to KS Q ISO/IEC 17025 and KOLAS accreditation. General remarks for test reports Statement concerning the uncertainty of the measurement systems used for the tests (may be required by the product standard or client) Internal procedure used for type testing through which traceability of the measuring uncertainty has been established: Procedure number, issue date and title: Calculations leading to the reported values are on file with the testing laboratory that conducted the testing. Statement not required by the standard or client used for type testing Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR22-SRF0236 Page (3) of (34) KCTL-TIR001-003/7 (220705) KP22-06294 CONTENTS 1. General information ...................................................................................................... 4 2. Device information ........................................................................................................ 4 2.1. Accessory information ............................................................................................ 4 2.2. Frequency/channel operations ................................................................................ 5 2.3. RF power setting in TEST SW ................................................................................ 5 2.4. Duty Cycle Factor ................................................................................................... 5 3. Antenna requirement .................................................................................................... 6 4. Summary of tests .......................................................................................................... 7 5. Measurement uncertainty ............................................................................................. 8 6. Measurement results explanation example .................................................................. 9 7. Test results ................................................................................................................. 10 7.1. Maximum peak output power ................................................................................ 10 7.2. Peak Power Spectral Density ............................................................................... 13 7.3. 6 ㏈ Bandwidth(DTS Channel Bandwidth) .......................................................... 15 7.4. Spurious Emission, Band Edge and Restricted bands .......................................... 17 7.5. Conducted Spurious Emission .............................................................................. 30 7.6. AC Conducted emission ....................................................................................... 32 8. Measurement equipment ............................................................................................ 34 Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR22-SRF0236 Page (4) of (34) KCTL-TIR001-003/7 (220705) KP22-06294 1. General information Client : BioHealthCore Address : 153, 8, Hwanggeum-ro, Wonju-si, Gangwon-do, Republic of Korea Manufacturer : BioHealthCore Address : 153, 8, Hwanggeum-ro, Wonju-si, Gangwon-do, Republic of Korea Laboratory : Eurofins KCTL Co.,Ltd. Address : 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea Accreditations : FCC Site Designation No: KR0040, FCC Site Registration No: 687132 VCCI Registration No. : R-20080, G-20078, C-20059, T-20056 CAB Identifier: KR0040 ISED Number: 8035A KOLAS No.: KT231 2. Device information Equipment under test : IOT Grip Model : Soundbody Frequency range : 2 402 ㎒ ~ 2 480 ㎒ Modulation technique : GFSK Number of channels : 40 ch Power source : DC 3.7 V(Battery) Antenna specification : PCB pattern antenna Antenna gain : 0.686 ㏈i Software version : BIO_SS_A220S01 Hardware version : BIO_HS_B220S01 Operation temperature : -30 °C ~ 70 °C 2.1. Accessory information Equipment Manufacturer Model Serial No. Power source N/A - - - - Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR22-SRF0236 Page (5) of (34) KCTL-TIR001-003/7 (220705) KP22-06294 2.2. Frequency/channel operations This device contains the following capabilities: Bluetooth Low Energy Ch. Frequency (㎒) 00 2 402 . . . . 19 2 440 . . . . 39 2 480 Table 2.2.1. Bluetooth Low Energy 2.3. RF power setting in TEST SW Frequency(㎒) RF Power setting value 2 402 Default 2 440 Default 2 480 Default 2.4. Duty Cycle Factor Test mode Period (ms) On time (ms) Duty cycle Duty Cycle Factor (dB) (Linear) (%) 1M Bits/s, 37 Packet 1.000 1.000 1.00 0 100.00 0.00 Notes. 1. DCF is not compensated to average result because duty cycle is 100% Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR22-SRF0236 Page (6) of (34) KCTL-TIR001-003/7 (220705) KP22-06294 3. Antenna requirement Requirement of FCC par…

Text truncated - open the document above for the full version.

This document shall not be reproduced, except in full, without the written approval Test setup photos - 9 ㎑ ~ 30 ㎒ - 30 ㎒ ~ 1 ㎓ This document shall not be reproduced, except in full, without the written approval - 1 ㎓~ 18 ㎓ - 18 ㎓ ~ 26.5 ㎓ This document shall not be reproduced, except in full, without the written approval - Conducted Emission