2A9OT-FWTD000001WIFI intelligent RGB anti-fog downlight

Quick Guide To Control Smart Devices 1. Add device 1.1.Download Smart Life App Please scan the QR Code, or get Smart Life downloaded from App Store or Android Market. 1.2 Sign up and log in 1.3 Turn on the pairing mode Turn on-off-on-off-on-off-on then the bulb will flash as ready to pair 1.4.1 Select non-BLE deviceSelect your device manually 1.4.2 Select BLE deviceThe system will search for nearby device App name in App Store for IOS App name in Play store for Android 2. Enable Smart Life skill in Alexa APP3. Control smart device by Voice 3.1. Discover devices 3.2. Control devices by voice 3.3. Support Skill list Choose "Skills" in the options bar, and then search "Smart Life" in the input box. Select Smart Life in the search results, and then click "Enable Skill" Then input the user name and password that you had previously registered. Only support the account in the United States. After the above operation is successful, you can control the bulb via Echo. Firstly, you need to say to Echo: Echo(or Alexa), discover my devices. Echo will start to find the devices which is added in Smart Life APP, which will take about 20 seconds, then it will tell you the result. You can also click "Discover devices" in Alexa APP, then it will show the devices that found successfully Attention: The name of the device must be consistent with the addition of Smart Life app. You can also group the bulbs and give instructions to control them together. Attention: Echo is one of the wake-up names, which can be any of these three names(Settings): Alexa, Echo, Amazon You can control devices by instructions like these: Alexa (or echo), turn on [bedroom light] Alexa (or echo), turn off [bedroom light] Alexa (or echo), set [bedroom light] to 50 percent Alexa (or echo), increase [bedroom light] to 50 percent Alexa (or echo), decrease [bedroom light] to 50 percent Alexa (or echo), set [smart heater] to 34 Alexa (or echo), raise [smart heater] by 4 Alexa (or echo), lower [smart heater] by 2 For other third-party access service, you can view the connection steps here. 1.6. Rename the device After the device is added successfully, click the device description text to modify device name. The name of the device is recommended to use easy pronunciation of the English words. (Amazon Echo only supports English temporarily) Multiple devices can be added and renamed according to the above procedures. 1.5 Connecting WIFI and adding device Device only supports 2.4GHz. If your WIFI is 5GHz, make sure to set it as 2.4GHz. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Product name: WIFI intelligent RGB anti-fog downlight Model: FWTD000001 RF Exposure Warning Statements: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

[ShenZhen HuaKe Light Electronics Co., Ltd] [5/F, No. 1, Chaxi Sanwei Industrial Zone Gushu Community, Xixiang Street Bao' an District] [Shenzhen, Guangdong] [China] Date: Aug. 21, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2A9OT-FWTD000001 US Agent – Attestation Statement / Part 2.911(d)(7) [ShenZhen HuaKe Light Electronics Co., Ltd] certifies, that as of [Aug. 21, 2023], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2A9OT- FWTD000001. [ShenZhen HuaKe Light Electronics Co., Ltd], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [ShenZhen HuaKe Light Electronics Co., Ltd] for FCC ID: 2A9OT-FWTD000001. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: [ShenZhen HuaKe Light Electronics Co., Ltd] FRN: 0033166737 Designated Agent: FCC US Agent, LLC Company Representative: [Lu Lihua] Tel: +86-13714083236 Email: [email protected] Designated Agent Representative: Tim Payne Signature: Signature:

ShenZhen HuaKe Light Electronics Co., Ltd 5/F, No. 1, Chaxi Sanwei Industrial Zone Gushu Community, Xixiang Street Bao' an District Shenzhen, Guangdong China Agent Authorization Company: ShenZhen HuaKe Light Electronics Co., Ltd Address: 5/F, No. 1, Chaxi Sanwei Industrial Zone Gushu Community, Xixiang Street Bao' an District Shenzhen, Guangdong China Product Name: WIFI intelligent RGB anti-fog downlight Model Number(s): FWTD000001 Product Description: WIFI intelligent RGB anti-fog downlight We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Aug. 21, 2023 Name: Lu Lihua Title: General Manager Company: ShenZhen HuaKe Light Electronics Co., Ltd

Report No.: AGC09469220710AP02 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC09469220710AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC09469220710AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC09469220710AP02 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report****************************************

FCC ID Label Location 10mm*10mm FCC ID: 2A9OT-FWTD000001

Report No.: AGC09469220710AP02 Page 1 of 4 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC09469220710AP02 Page 2 of 4 OPEN VIEW OF EUT (FIGURE 3) ANTENNA CLOSE-UP PHOTO-1 Antenna Report No.: AGC09469220710AP02 Page 3 of 4 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) Report No.: AGC09469220710AP02 Page 4 of 4 INTERNAL VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 4) ****************************************End of Report****************************************

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION Product Description WIFI intelligent RGB anti-fog downlight Test Model FWTD000001 FCC ID 2A9OT-FWTD000001 2. EVALUATION METHOD AND LIMIT Human exposure to RF emissions from mobile devices (47 CFR §2.1091) may be evaluated based on the MPE limits adopted by the FCC for electric and magnetic field strength and/or power density, as appropriate, since exposures are assumed to occur at distances of 20 cm or more from persons. LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE Frequency Range (MHz) E-field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E| 2 , |H| 2 or S (Minutes) 0.3 -- 1.34 614 1.63 (100)* 30 1.34 -- 30 824/f 2.19/f (180/f 2 )* 30 30 -- 300 27.5 0.073 0.2 30 300 -- 1500 -- -- f/1500 30 1500 -- 100,000 -- -- 1.0 30 *Note: 1. f= Frequency in MHz * Plane-wave Equivalent Power Density 2. The averaging time for General Population/Uncontrolled exposure to fixed transmitters is not applicable for mobile and portable transmitters. See 47 CFR §§2.1091 and 2.1093 on source-based time-averaging requirement for mobile and portable transmitters. S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna CALCULATION A minimum test separation distance ≥ 20 cm is required between the antenna and radiating structures of the device and nearby persons to apply mobile device exposure limits. The distance must be at least 20 cm and fully supported by the operating and installation configurations of the transmitter and its antenna(s), according to the source-based time-averaged maximum power requirements of § 2.1091(d)(2). In cases where cable losses or other attenuations are applied to determine compliance, the most conservative operating configurations and exposure conditions must be evaluated. Antenna Gain=1.37dBi (Numeric 1.37), π=3.14 Note: 1. Only the worst case recorded. Frequency Output Power Output Power Power Density Power Density Limit MHz dBm mW mW/cm 2 mW/cm 2 2437 13.20 20.89 0.00569 1

Huaxin Communication Equipment (Shenzhen) Co., Ltd Product Nane 2M091 Antenna Type Spring Antenna Writer Jianwei Wang Maximum Gain:1.37dBi Efficiency:47.2% Antenna Test Report 2M091 Antenna test report Version 1.0.0 Date: 2022-04-16 NO: 0000000001 2M091 Anteima test report Content 1. General Description ............................................................................. 2 2. Technical Information ......................................................................... 3 3. Test Standards ...................................................................................... 3 4. Test Item .............................................................................................. 4 5. Test Photo ............................................................................................ 4 Appendix A S1WSWR ............................................................................. 5 Appendix B Gain and Efficiency .............................................................. 6 Appendix C Radiation Pattem(lD and 3D) ............................................... 7 Appendix D Test Setup Photo .................................................................. 9 Appendix E EUT Photo .......................................................................... 10 2M091 Anteima test report 1. General Description EUT Name 2M091 Antenna Wireless type WIFI Antenna Type Spring antenna Dimensions Appendix A 2. Technical Information Frequency Range 2402MHz 〜2480MHz Test Frequency 2402MHz 〜2480MHz Wire diameter 0.6mm high 12mm Number of turns 4 Circle diameter 3.55mm Material Phosphor copper 3. Test Standards Identity Document Title IEEE 149- 1979 IEEE Standard Test Procedures for Antennas 4. Test Item Report Section Description Appendix B S11A/SWR Appendix C Gain and Efficiency Appendix D Radiation Pattern ( 1D and 3D) 2M091 Anteima test report 5. Test Photo Report Section Description Appendix E Test Setup Photo Appendix B Sll/VSWR Frequency (MHz) 2402 2450 2480 Return Loss - 12 -23 - 13 Appendix C Gain and Efficiency Frequency Gain/ Efficienc /MHz B /% 2402 0.46 44.36 2410 0.71 45.71 2420 0.92 45.92 2430 0.91 45.6 2440 0 95 45 6 2450 0.93 45.29 2460 1.27 46.45 2470 1.37 46.88 2480 1.25 47.21 2M091 Antenna test report d 2M091 Anteima test report Appendix D Radiation Pattern(2D ) 2M091 Anteima test report Appendix E Test Setup Photo Antenna Diagram

Page 1 of 82 Report No.: AGC09469220710FE05 FCC ID : 2A9OT-FWTD000001 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : WIFI intelligent RGB anti-fog downlight BRAND NAME : N/A MODEL NAME : FWTD000001 APPLICANT : ShenZhen HuaKe Light Electronics Co., Ltd DATE OF ISSUE : Oct. 23, 2023 STANDARD(S) TEST PROCEDURE(S) : FCC Part 15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd FCC Test Report Report No.: AGC09469220710FE05 Page 2 of 82 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Oct. 23, 2023 Valid Initial Release Report No.: AGC09469220710FE05 Page 3 of 82 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCYS ....................................................................................................... 6 2.3. IEEE 802.11N MODULATION SCHEME .................................................................................................... 7 2.4. RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................... 8 2.5. TEST METHODOLOGY ............................................................................................................................. 8 2.6. SPECIAL ACCESSORIES ......................................................................................................................... 8 2.7. EQUIPMENT MODIFICATIONS ................................................................................................................. 8 2.8. ANTENNA REQUIREMENT....................................................................................................................... 8 3. MEASUREMENT UNCERTAINTY ................................................................................................................. 11 4. DESCRIPTION OF TEST MODES ................................................................................................................. 12 5. SYSTEM TEST CONFIGURATION ................................................................................................................ 13 5.1. CONFIGURATION OF EUT SYSTEM ...................................................................................................... 13 5.2. EQUIPMENT USED IN EUT SYSTEM ..................................................................................................... 13 5.3. SUMMARY OF TEST RESULTS .............................................................................................................. 13 6. TEST FACILITY .............................................................................................................................................. 14 7. OUTPUT POWER ........................................................................................................................................... 16 7.1. MEASUREMENT PROCEDURE ............................................................................................................. 16 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 16 7.3. LIMITS AND MEASUREMENT RESULT .................................................................................................. 17 8. BANDWIDTH .................................................................................................................................................. 18 8.1. MEASUREMENT PROCEDURE ............................................................................................................. 18 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 18 8.3. LIMITS AND MEASUREMENT RESULTS ............................................................................................... 19 9. CONDUCTED SPURIOUS EMISSION........................................................................................................... 32 9.1. MEASUREMENT PROCEDURE ............................................................................................................. 32 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 32 9.3. MEASUREMENT EQUIPMENT USEDJN ................................................................................................ 32 9.4. LIMITS AND MEASUREMENT RESULT .................................................................................................. 32 Report No.: AGC09469220710FE05 Page 4 of 82 10. MAXIMUM CONDUCTED OUTPUT POWER SPECTRAL DENSITY ........................................................ 47 10.1 MEASUREMENT PROCEDURE ............................................................................................................ 47 10.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................... 47 10.3 MEASUREMENT EQUIPMENT USED ................................................................................................... 47 10.4 LIMITS AND MEASUREMENT RESULT ................................................................................................. 47 11. RADIATED EMISSION ................................................................................................................................. 54 11.1. MEASUREMENT PROCEDURE............................................................................................................ 54 11.2. TEST SETUP .....................................................................…

Text truncated - open the document above for the full version.

Report No.: AGC09469220710FE05 Page 64 of 82 EUT WIFI intelligent RGB anti-fog downlight Model Name FWTD000001 Temperature 23.8°C Relative Humidity 59% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with data rate 1 2462MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC09469220710FE05 Page 65 of 82 EUT WIFI intelligent RGB anti-fog downlight Model Name FWTD000001 Temperature 23.8°C Relative Humidity 59% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with data rate 1 2462MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC09469220710FE05 Page 66 of 82 EUT WIFI intelligent RGB anti-fog downlight Model Name FWTD000001 Temperature 23.8°C Relative Humidity 59% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11g with data rate 6 2412MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC09469220710FE05 Page 67 of 82 EUT WIFI intelligent RGB anti-fog downlight Model Name FWTD000001 Temperature 23.8°C Relative Humidity 59% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11g with data rate 6 2412MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC09469220710FE05 Page 68 of 82 EUT WIFI intelligent RGB anti-fog downlight Model Name FWTD000001 Temperature 23.8°C Relative Humidity 59% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11g with data rate 6 2462MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC09469220710FE05 Page 69 of 82 EUT WIFI intelligent RGB anti-fog downlight Model Name FWTD000001 Temperature 23.8°C Relative Humidity 59% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11g with data rate 6 2462MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC09469220710FE05 Page 70 of 82 EUT WIFI intelligent RGB anti-fog downlight Model Name FWTD000001 Temperature 23.8°C Relative Humidity 59% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11n20 with data rate 6.5 2412MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC09469220710FE05 Page 71 of 82 EUT WIFI intelligent RGB anti-fog downlight Model Name FWTD000001 Temperature 23.8°C Relative Humidity 59% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11n20 with data rate 6.5 2412MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC09469220710FE05 Page 72 of 82 EUT WIFI intelligent RGB anti-fog downlight Model Name FWTD000001 Temperature 23.8°C Relative Humidity 59% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11n20 with data rate 6.5 2462MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC09469220710FE05 Page 73 of 82 EUT WIFI intelligent RGB anti-fog downlight Model Name FWTD000001 Temperature 23.8°C Relative Humidity 59% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11n20 with data rate 6.5 2462MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC09469220710FE05 Page 74 of 82 EUT WIFI intelligent RGB anti-fog downlight Model Name FWTD000001 Temperature 23.8°C Relative Humidity 59% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11n40 with data rate 13.5 2422MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC09469220710FE05 Page 75 of 82 EUT WIFI intelligent RGB anti-fog downlight Model Name FWTD000001 Temperature 23.8°C Relative Humidity 59% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11n40 with data rate 13.5 2422MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC09469220710FE05 Page 76 of 82 EUT WIFI intelligent RGB anti-fog downlight Model Name FWTD000001 Temperature 23.8°C Relative Humidity 59% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11n40 with data rate 13.5 2452MHz Antenna Horizontal Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC09469220710FE05 Page 77 of 82 EUT WIFI intelligent RGB anti-fog downlight Model Name FWTD000001 Temperature 23.8°C Relative Humidity 59% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11n40 with data rate 13.5 2452MHz Antenna Vertical Test Graph for Peak Measurement Test Graph for Average Measurement RESULT: PASS Report No.: AGC09469220710FE05 Page 78 of 82 12. LINE CONDUCTED EMISSION TEST 12.1. LIMITS OF LINE CONDUCTED EMISSION TEST Frequency Maximum RF Line Voltage Q.P (dBμV) Average (dBμV) 150kHz~500kHz 66-56 56-46 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz. 12.2. BLOCK DIAGRAM OF LINE CONDUCTED EMISSION TEST EUT & Support Units Report No.: AGC09469220710FE05 Page 79 of 82 12.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10 (see Test Facility for the dimensions of the ground plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. 2. Support equipment, if needed, was placed as per ANSI C63.10. 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10. 4. All support equipmen…

Text truncated - open the document above for the full version.

Report No.: AGC09469220710AP01 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC09469220710AP01 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TEST SETUP ****************************************End of Report*************************************