2A9OWEX-GCexlene gamecube controller switch

Exlene Gamecube Controller Switch User Manual Upgraded Version V1.0 (2021-11-18) 1. Bluetooth Pairing Mode: Short press the HOME button connect. In shutdown status, long press the HOME button for 3 seconds to enter the Bluetooth pairing mode, the light flashes; If pairing unsuccessful, it go to sleep mode in 2 minutes. Automatic identification of Switch host, the light is always on after successful connection (with 4 channel lights) Bluetooth mode can be connected to Switch or PC, the operation is same. Stream is available to use, body feeling is available to use. Android mode: “A”button + Home button, enter Bluetooth pairing mode, 2 lights flashing, after successful connection, the light is always on; IOS mode: “Y” buton + Home buton, enter Bluetooth pairing mode, 3 lights flashing, after successful connection, the light is always on; (Note need to use XOBX protocol) Note: After all Bluetooth modes are successfully connected (including back-to-connect), the controller has a short vibrate, indicating successful connection 2. Receiver Mode Press and hold the HOME button for 3 seconds to enter the receiver pairing (light blinking). Automatically recognizes Android, Switch Pro, and PC when connected, the 1 light will be on and the controller has a short vibrate at the same time; The receiver LED flashes when connected and is always on when the controller is connected. Enter the receiver Xinput mode, the light flashes, after successful connection, 4 lights are always on, and the controller has a short vibrate at the same time; You can simultaneously long press the '+' key '-' key for 3 seconds to switch between X-INPUT and D-INPUT mode, (X/Dinput conversion when the 4 lights flash 2 lights), switch successfully after the controller has a short vibration; 3. Back-connect Mode If the SWITCH host is in sleep (not in flight mode), a short press on the HOME button will wake up the host, and automatically connect to its paired host (slow flashing LED), after 1 minute of unsuccessful reconnection, it will automatically sleep. (Other keys do not wake up the controller.) 4. Automatic hibernation When Switch host screen off, the controller will automatically hibernate. If no button is pressed within 5 minutes, it will automatically sleep (including the sensor does not move). (Time can be adjusted according to demand) Long press the HOME button for 5 seconds to shut down, disconnect from the host, the controller will hibernate. (Time can be adjusted according to demand) 5. Charging indication Controller is off: the corresponding power light flashes when charging, the indicator light is off when fully charged; Controller is on: the current channel indicator flashes when charging, the current indicator is always on when fully charged. Battery low voltage alarm: current channel flashing fast. 6. Low voltage alarm If the lithium battery voltage is lower than 3.55V ± 0.1V, the red light flashes fast to indicate low voltage; (voltage can be adjusted according to demand) If the lithium battery voltage is lower than 3.45V±0.1V, it will automatically sleep; (voltage can be adjusted according to demand) 7. USB Wired Mode Automatic recognition of Switch, PC, Android platform. PC platform automatically identified as X-INPUT mode by default, you can simultaneously long press the '+' key '-' key for 3 seconds to switch between X-INPUT and D-INPUT mode, connected to the handle vibration; Automatic recognition of Switch and Android platforms, the controller has a short vibration. 8. Controller hardware reset Hardware reset button is at the back of the controller. 9. Turbo andAUTO TURBO Any mode: Press (for the first time) A/B/X/Y/L1/L2/L3/R1/R2/R3 (any button of those) + Turbo button to set the Turbo function, the controller has a short vibration; Again (for the second time) press the A/B/X/Y/L1/L2/L3/R1/R2/R3 (Any button of those) + TURBO button to achieve AUTO TURBO function, the controller has a short vibration; (For example, A button has been choosed to set AUTO TURBO function, you need to press the A button again to open AUTO TURBO, and then press the A key to close AUTO TURBO ); Press (for the third time) the A/B/X/Y/L1/L2/L3/R1/R2/R3 (Any button of those) + the Turbo button to clear the Turbo function of the single button you choosed. Turbo speed is 12 times/sec; Press and hold the Turbo button for more than 3S and then press the minus key to clear the Turbo function for all buttons, and the LED will resume the current mode indicator; Adjustment: (Press and hold turbo, use the right stick (up and down) to control adjustment, three gears are 20 times / second, 12 times / second, 5 times / second; Default speed is 12 times / second. It records user's last adjustment. 10. Vibration Adjustment Combination operation: firstly press and hold the TURBO key, then press the plus key (+) for increase, minus key (-)for decrease (20% 40% 70% 100% 0%) Default value is 70%. It records user's last adjustment. Corresponding intensity will vibrate differently when adjust the vibration. Basic Setting: 1，How to connect with Switch/Switch Lite console? 1 Just simply go into the “Controller” menu on your Nintendo Switch/Switch Lite. Go to the"Change Grip/Order"sub-menu. Hold down the Home button on the controller till the below blue light flash. 2 Press L + R button Press A button when you are ready. 3 Connected! 2, How to wake up the switch? 4 hold down the Home button to wake the Nintendo Switch from sleep mode, the controller immediately registers as controller number one. 3, How to set Turbo and Auto Turbo function? Hold "Turbo" down and press any button(A/B/X/Y/L/R/ZL/ZR) to make that button become a “Turbo” version of the button in question that repeatedly presses over and over again when you hold it down. 5 Enter Turbo function. Do it again to make the button an “always on” Turbo button 6 Enter Auto Turbo. 7 Do it a third time to return the button’s function to normal. 4, How to adjust vibration? Press "Turbo" and "-" to decr…

Text truncated - open the document above for the full version.

ShenzhenAiSiKeLinKeJiYouXianGongSi Modeldifferences We: ShenzhenAiSiKeLinKeJiYouXianGongSiStatementthatAllthemodel“EX-GC,EX-GC-Blue, EX-GC-Gold”areidenticalexceptmodelname. AllabovemodelsareidenticalinthesamePCBlayout,interiorstructureandelectricalcircuits. Theonlydifferenceismodelnameforcommercialpurpose. CityandCountry:Date:Name: (thismustbeaperson) Function:Signature: (orofficialcompanystamp) Shenzhen2022.12.15TingtingHuangManager

C5266091_X8_Ed.1 1/1 LetterofAuthorization <ShenzhenAiSiKeLinKeJiYouXianGongSi> Company:ShenzhenAiSiKeLinKeJiYouXianGongSi Address:#501,A4Building,HaibinGarden,Baoan35Zone,Shenzhen, Guangdong ProductName:exlenegamecubecontrollerswitch ModelNumber:EX-GC,EX-GC-Blue,EX-GC-Gold FCCIdentifier:2A9OWEX-GC WeauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdelCarme,s/n, 08193Bellaterra,Spain,toactonourbehalfonallmattersconcerningthe abovenamedequipment. AnyindividualwithinLGAITechnologicalCenterS.A.isauthorizedtoactonour behalfandtakeactionontheapplication. WedeclarethatauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdel Carme,s/n,08193Bellaterra,Spain,isallowedtoforwardallinformation relatedtotheapprovalprojecttotheFederalCommunicationCommissionand todiscussanyissuesconcerningtheapprovalapplication.Anyandallacts carriedoutbyLGAITechnologicalCenterS.A.onourbehalfshallhavethe sameeffectasactsofourown. Name:TingtingHuangDate:2022.12.15 Title:Engineer Signatureofapplicant:

C5266091_X10_Ed.1 1/1 ShenzhenAiSiKeLinKeJiYouXianGongSi #501,A4Building,HaibinGarden,Baoan35Zone,Shenzhen,Guangdong Date:2022.12.15 Subject:RequestforConfidentiality FCCID:2A9OWEX-GC ToWhomItMayConcern, PursuanttotheprovisionsofSections0.457and0.459ofCommission'srules (47CFR0.457,0.459),wearerequestingtheCommissiontowithholdthefollowing attachment(s)asconfidentialdocumentfrompublicdisclosure. ExhibitsLong-Term Confidentiality Short-Term Confidentiality IDLabel/LocationNoNo AttestationStatementNoNo ExternalPhotosNo BlockDiagram Schematics TestReportNoNo TestSetupPhotosNo User’sManual InternalPhotosNo PartsList/TuneUp RFExposureInfo OperationalDescription CoverLetter(s)NoNo SDRSoftware/SecurityInfoNo Incaseofshort-termConfidentiality,theapplicantrequeststheexhibitsselected abovearewithheldfrompublicviewforaperiodof_180_daysfromthedateofthe GrantofEquipmentAuthorizationandpriortomarketing. Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublic disclosureofabovedocumentsmightbeharmfultoourcompanyandwouldgive competitoranunfairadvantageinthemarket. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondentduringcertificationreviewprocesscannotbegrantedasconfidential documentsandthoseinformationwillbeavailableforpublicreviewoncethegrantof equipmentauthorizationisissued. Sincerely, Name:TingtingHuangDate:2022.12.15 Title:Engineer Signatureofapplicant:

FCCID:2A9OWEX-GC

FCCIDLABELINGANDLOCATION FCCIDLabel FCCIDLabelLocation Thelabelshownshallbepermanentlyaffixedataconspicuouslocationonthedeviceandbe readilyvisibletotheuseratthetimepurchase(Labelingrequirementsper2.925) exlenegamecubecontrollerswitch FCCID:2A9OWEX-GC

FCCID:2A9OWEX-GC PCBAntenna

FCCID:2A9OWEX-GC RFEXPOSUREEVALUATIONMETHOD AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeusedto evaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF)Radiation asspecifiedin§1.1307(b) EUTSpecification EUT exlenegamecubecontrollerswitch Frequencyband (Operating) WLAN:2.412GHz~2.462GHz WLAN:5.150GHz~5.250GHz WLAN:5.725GHz~5.850GHz OthersBT:2402-2480MHz DevicecategoryPortable(<20cmseparation) Mobile(>20cmseparation) Others ExposureclassificationOccupational/Controlledexposure(S=5mW/cm2) GeneralPopulation/Uncontrolledexposure (S=1mW/cm2) AntennadiversitySingleantenna Multipleantennas Txdiversity Rxdiversity Tx/Rxdiversity Max.outputpower -3.43dBm(0.00045W) Antennagain(Max) -2.30dBi EvaluationappliedMPEEvaluation SAREvaluation FCCID:2A9OWEX-GC RFEXPOSUREEVALUATIONMETHOD SARTestExclusionThresholdsfor100MHz – 6GHzand ≤ 50mm ApproximateSARTestExclusionPowerThresholdsatSelectedFrequenciesandTestSeparation DistancesareillustratedinthefollowingTable. The1-gand10-gSARtestexclusionthresholdsfor100MHzto6GHzattestseparation distances ≤ 50mmaredeterminedby: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance, mm)] · [ √ f(GHz)] ≤ 3.0for1-gSARand ≤ 7.5for10-gextremitySAR,where f(GHz)istheRFchanneltransmitfrequencyinGHz PoweranddistanceareroundedtothenearestmWandmmbeforecalculation Theresultisroundedtoonedecimalplaceforcomparison Thetestexclusionsareapplicableonlywhentheminimumtestseparationdistanceis ≤ 50 mmandfortransmissionfrequenciesbetween100MHzand6GHz.Whentheminimumtest separationdistanceis<5mm,adistanceof5mmisappliedtodetermineSARtest exclusion. FCCID:2A9OWEX-GC Maximummeasuredtransmitterpower. BLE Operating Mode Frequency Measur ed Power max. power Antenna Gain Antenna Gain (linear) min.test separation distance ResultLimit (MHz)(dBm)(mW)(dBi)/(mm) GFSK 2402-3.430.45-2.300.5950.14073 2440-4.110.39-2.300.5950.12133 2480-5.020.31-2.300.5950.09913 Remark:Thebestcasegainoftheantennais-2.30dBi. The1-gand10-gSARtestexclusionthresholdsfor100MHzto6GHzattest separationdistances≤50mmaredeterminedby: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparation distance,mm)]·[√f(GHz)] ThetestResultislessthan3.0for1-gSARand≤7.5for10-gextremitySAR. RFexposurestatement:NoSARisrequired.AccordingtoKDB447498andpart 2.1093,UnlessspecificallyrequiredbythepublishedRFexposureKDB procedures,standalone1-gheadorbodyand10-gextremitySARevaluationfor generalpopulationexposureconditions,bymeasurementornumericalsimulation, isnotrequiredwhenthecorrespondingSARTestExclusionThreshold condition(s),listedbelow,is(are)satisfied.

Report No.: BL-SZ2290748-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Shenzhen Zhixu Technology Co., LTD Address: 1101, Building A, Guoren Building, Keji Zhongsan Road, Gaoxin Park, Nanshan District, Shenzhen City, China. Equipment Type: PCB Onboard Antenna Model Name: ZXD1888 Brand Name: Kashimura Test Standard: ANSI/IEEE Std 149-1979 Test Date: Sep. 23, 2022 Date of Issue: Sep. 27, 2022 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Mai Jintian Checked by: Tolan Tu Approved by: Wei Yanquan (Chief Engineer) _______________ _______________ _______________ Report No.: BL-SZ2290748-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Sep. 27, 2022 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 3 1.1 Test Laboratory ................................................................................................................... 3 1.2 Test Location ....................................................................................................................... 3 2 PRODUCT INFORMATION ....................................................................................................... 4 2.1 Applicant Information ........................................................................................................... 4 2.2 Manufacturer Information .................................................................................................... 4 2.3 General Description for Equipment under Test (EUT) ......................................................... 4 2.4 Ancillary Equipment ............................................................................................................. 4 2.5 Technical Information .......................................................................................................... 4 3 SUMMARY OF TEST RESULTS ............................................................................................... 5 3.1 Test Standards .................................................................................................................... 5 3.2 Test Verdict ......................................................................................................................... 5 3.3 Test Uncertainty .................................................................................................................. 5 4 GENERAL TEST CONFIGURATIONS ...................................................................................... 6 4.1 Test Condition ..................................................................................................................... 6 4.2 Test Equipment List ............................................................................................................. 6 4.3 Test Setup ........................................................................................................................... 7 ANNEX A TEST RESULTS ........................................................................................................... 8 A.1 Gain and Efficiency ............................................................................................................. 8 ANNEX B RADIATION PATTERN ................................................................................................ 9 ANNEX C TEST SETUP PHOTOS ............................................................................................. 12 ANNEX D EUT PHOTO .............................................................................................................. 12 Report No.: BL-SZ2290748-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China ReportNo.:BL-SZ2290748-901 Tel:+86-755-66850100 Web:www.titcgroup.com E-mail:[email protected] TemplateNo.:TRP-Passive-EN(2022-09-07) PageNo.4/13 Add:BlockB,1/F,BaishaScienceandTechnologyPark,ShaheXiRoad,NanshanDistrict,Shenzhen,GuangdongProvince,P.R.China 2PRODUCTINFORMATION 2.1ApplicantInformation ApplicantShenzhenZhixuTechnologyCo.,LTD Address 1101,BuildingA,GuorenBuilding,KejiZhongsanRoad,GaoxinPark, NanshanDistrict,ShenzhenCity,China. 2.2ManufacturerInformation ManufacturerShenzhenZhixuTechnologyCo.,LTD Address 1101,BuildingA,GuorenBuilding,KejiZhongsanRoad,GaoxinPark, NanshanDistrict,ShenzhenCity,China. 2.3GeneralDescriptionforEquipmentunderTest(EUT) EUTNamePCBOnboardAntenna ModelNameUnderTestZXD1888A AntennaType PCBAntenna Dimensions13.0*7.5mm 2.4AncillaryEquipment Note:Notapplicable. 2.5TechnicalInformation TestFrequencies 2400MHz,2410MHz,2420MHz,2430MHz,2440MHz,2450MHz, 2460MHz,2470MHz,2480MHz,2490MHz,2500MHz Report No.: BL-SZ2290748-901 Tel: +86-755-6…

Text truncated - open the document above for the full version.

ShenzhenCTATestingTechnologyCo.,Ltd. Room106,Building1,YibaolaiIndustrialPark,QiaotouCommunity,FuhaiStreet, Bao‘anDistrict,Shenzhen,China ShenzhenCTATestingTechnologyCo.,Ltd. Room106,Building1,YibaolaiIndustrialPark,QiaotouCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,China Tel:+86-75523225875E-mail:[email protected]:http://www.cta-test.cn FCCPART15SUBPARTCTESTREPORT FCCPART15.247 ReportReferenceNo........................: FCCID.................................................: CTA22121500201 2A9OWEX-GC Compiledby (position+printedname+signature) .. : FileadministratorsKevinLiu Supervisedby (position+printedname+signature) .. : ProjectEngineerKevinLiu Approvedby (position+printedname+signature) .. : RFManagerEricWang Dateofissue ......................................... :Dec.21,2022 TestingLaboratoryName ................ : ShenzhenCTATestingTechnologyCo.,Ltd. Address ................................................. : Room106,Building1,YibaolaiIndustrialPark,QiaotouCommunity, FuhaiStreet,Bao‘anDistrict,Shenzhen,China Applicant’sname ............................... : ShenzhenAiSiKeLinKeJiYouXianGongSi Address.................................................: #501,A4Building,HaibinGarden,Baoan35Zone,Shenzhen Guangdong Testspecification .............................. : Standard ................................................ : FCCPart15.247 ShenzhenCTATestingTechnologyCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenCTATestingTechnologyCo.,Ltd.isacknowledgedascopyrightownerandsourceofthe material.ShenzhenCTATestingTechnologyCo.,Ltd.takesnoresponsibilityforandwillnotassume liabilityfordamagesresultingfromthereader'sinterpretationofthereproducedmaterialduetoits placementandcontext. Equipmentdescription ..................... : exlenegamecubecontrollerswitch TradeMark............................................: N/A Manufacturer ......................................... :DongguanXiechuangTechnologyCo.,Ltd Model/Typereference.........................:EX-GC ListedModels......................................: EX-GC-Blue,EX-GC-Gold Modulation...........................................:GFSK Frequency .............................................. From2402MHzto2480MHz Ratings...................................................:DC3.7VfrombatteryorDC5.0VfromUSBPort Result.....................................................:PASS ReportNo.:CTA22121500201Page 2 of 32 ShenzhenCTATestingTechnologyCo.,Ltd. Room106,Building1,YibaolaiIndustrialPark,QiaotouCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,China Tel:+86-75523225875E-mail:[email protected]:http://www.cta-test.cn TESTREPORT EquipmentunderTest:exlenegamecubecontrollerswitch Model/Type:EX-GC ListedModels:EX-GC-Blue,EX-GC-Gold Applicant : ShenzhenAiSiKeLinKeJiYouXianGongSi Address: #501,A4Building,HaibinGarden,Baoan35Zone,Shenzhen Guangdong Manufacturer : DongguanXiechuangTechnologyCo.,Ltd Address: Room301Building1ShaTouHeNewStreetShaTouCommunity Chang’AnTownDongGuanGuangDong TestResult:PASS Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetest laboratory. ReportNo.:CTA22121500201Page 3 of 32 ShenzhenCTATestingTechnologyCo.,Ltd. Room106,Building1,YibaolaiIndustrialPark,QiaotouCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,China Tel:+86-75523225875E-mail:[email protected]:http://www.cta-test.cn Contents 1TESTSTANDARDS ............................................................................................................................... 4 2SUMMARY....................................................................................................................................................5 2.1GeneralRemarks5 2.2ProductDescription5 2.3EquipmentUnderTest5 2.4ShortdescriptionoftheEquipmentunderTest(EUT)5 2.5EUToperationmode6 2.6BlockDiagramofTestSetup6 2.7RelatedSubmittal(s)/Grant(s)6 2.8Modifications6 3TESTENVIRONMENT ......................................................................................................................... 7 3.1Addressofthetestlaboratory7 3.2TestFacility7 3.3Environmentalconditions7 3.4Summaryofmeasurementresults8 3.5Statementofthemeasurementuncertainty8 3.6EquipmentsUsedduringtheTest9 4TESTCONDITIONSANDRESULTS .................................................................................... 10 4.1ACPowerConductedEmission10 4.2RadiatedEmissionsandBandEdge13 4.3MaximumPeakOutputPower19 4.4PowerSpectralDensity20 4.56dBBandwidth22 4.6Out-of-bandEmissions24 4.7AntennaRequirement27 5TESTSETUPPHOTOSOFTHEEUT..................................................................................28 6PHOTOSOFTHEEUT....................................................................................................................29 ReportNo.:CTA22121500201Page 4 of 32 ShenzhenCTATestingTechnologyCo.,Ltd. Room106,Building1,YibaolaiIndustrialPark,QiaotouCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,China Tel:+86-75523225875E-mail:[email protected]:http://www.cta-test.cn 1TESTSTANDARDS Thetestswereperformedaccordingtofollowingstandards: FCCRulesPart15.247:FrequencyHopping,DirectSpreadSpectrumandHybridSystemsthatarein operationwithinthebandsof902-928MHz,2400-2483.5MHz,and5725-5850MHz. ANSIC63.10-2013:AmericanNationalStandardforTestingUnlicensedWirelessDevices KDB558074D01V05r02:GuidanceforPerformingComplianceMeasurementsonDigitalTransmission Systems(DTS)OperatingUnder§15.247 ReportNo.:CTA22121500201Page 5 of 32 ShenzhenCTATestingTechnologyCo.,Ltd. Room106,Building1,YibaolaiIndustrialPark,QiaotouCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,China Tel:+86-75523225875E-mail:[email protected]:http://www.cta-test.cn 2SUMMARY 2.1GeneralRemarks Dateofreceiptoftestsample:Dec.08,2022 Testingcommencedon:Dec.08,2022 Testingconcludedon: Dec.21,2022 2.2ProductDescription ProductDescription:exlenegamecubecontrollerswitch Model/Typereference:EX-GC ListedModels:X-GC-Blue,EX-GC-Gold Powersupply:DC3.7Vf…

Text truncated - open the document above for the full version.

FCCID:2A9OWEX-GC