2A9PS-M-Q59childrens tablet computer

Shenzhen Kxunda E-commerce Co., Ltd 405, Building 39-40, Shuidou Xinwei, Yousong Community, Longhua Street, Longhua District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2025/11/25 U.S. Agent Designation Shenzhen Kxunda E-commerce Co., Ltd acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2A9PS-M-Q59): Name and company of U.S. agent: GLOCERTS TECHNOLOGY INC Physical U.S. address of agent: 19784 SUNKISSED RIDGE DR RIVERSIDE, CA 92507 United States FRN of U.S. agent: 0036339737 Email address of U.S. agent: [email protected] GLOCERTS TECHNOLOGY INC acknowledges their obligation to accept service of process on behalf of Shenzhen Kxunda E-commerce Co., Ltd Shenzhen Kxunda E-commerce Co., Ltd with the FRN [0033177783] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Zhihua Lv Manager Shenzhen Kxunda E-commerce Co., Ltd Signature Huiying Fan Director GLOCERTS TECHNOLOGY INC 48_[mo del] US_Agent_2.911(d)(7) - U, V0 5

Shenzhen Kxunda E-commerce Co., Ltd Add: 405, Building 39-40, Shuidou Xinwei, Yousong Community, Longhua Street, Longhua District Shenzhen China Covered Equipment Certification Attestation Letter Date: 2025-12-2 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2A9PS-M-Q59 Shenzhen Kxunda E-commerce Co., Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Shenzhen Kxunda E-commerce Co., Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Shenzhen Kxunda E-commerce Co., Ltd (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Sincerely, Name/Title： Zhihua Lv/Manager Company: Shenzhen Kxunda E-commerce Co., Ltd Address: 405, Building 39-40, Shuidou Xinwei, Yousong Community, Longhua Street, Longhua District Shenzhen China Phone: 15979691859 Shenzhen Kxunda E-commerce Co., Ltd Add: 405, Building 39-40, Shuidou Xinwei, Yousong Community, Longhua Street, Longhua District Shenzhen China Fax: 15979691859 E-Mail: [email protected]

Shenzhen Kxunda E-commerce Co., Ltd Add: 405, Building 39-40, Shuidou Xinwei, Yousong Community, Longhua Street, Longhua District Shenzhen China Date: 2025-12-2 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, Name/Title： Zhihua Lv/Manager Company: Shenzhen Kxunda E-commerce Co., Ltd Address: 405, Building 39-40, Shuidou Xinwei, Yousong Community, Longhua Street, Longhua District Shenzhen China Phone: 15979691859 Fax: 15979691859 E-Mail: [email protected]

Shenzhen Kxunda E-commerce Co., Ltd Add: 405, Building 39-40, Shuidou Xinwei, Yousong Community, Longhua Street, Longhua District Shenzhen China Date: 2025-12-2 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint SHENZHEN CTA TESTING TECHNOLOGY CO., LTD.,Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community,Fuhai Street, Bao‘an District, Shenzhen, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Shenzhen Kxunda E-commerce Co., Ltd,405, Building 39-40, Shuidou Xinwei, Yousong Community, Longhua Street, Longhua District Shenzhen China (Applicant Name and address) Sincerely, Name/Title： Zhihua Lv/Manager Company: Shenzhen Kxunda E-commerce Co., Ltd Address: 405, Building 39-40, Shuidou Xinwei, Yousong Community, Longhua Street, Longhua District Shenzhen China Phone: 15979691859 Fax: 15979691859 E-Mail: [email protected]

Shenzhen Kxunda E-commerce Co., Ltd Add: 405, Building 39-40, Shuidou Xinwei, Yousong Community, Longhua Street, Longhua District Shenzhen China Date: 2025-12-2 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2A9PS-M-Q59 Product Name: childrens tablet computer Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) • Schematics • Block diagram • Operation description • SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES Declaration These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Sincerely, Name/Title： Zhihua Lv/Manager Company: Shenzhen Kxunda E-commerce Co., Ltd Address: 405, Building 39-40, Shuidou Xinwei, Yousong Community, Longhua Street, Longhua District Shenzhen China Phone: 15979691859 Fax: 15979691859 E-Mail: [email protected]

FCC ID: 2A9PS-M-Q59 External Photos of the EUT FCC ID: 2A9PS-M-Q59

Label and Location Size: L: 2.0cm*W: 1.0cm Label and Location FCC ID : 2A9PS-M-Q59 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2A9PS-M-Q59 Internal Photos of the EUT FCC ID: 2A9PS-M-Q59 BT/WiFi ANT FCC ID: 2A9PS-M-Q59 FCC ID: 2A9PS-M-Q59

RF Exposure evaluation FCC ID: 2A9PS-M-Q59 1.1. Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1093 RF exposure requirement KDB447498 D01v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 1.2. Requirement According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.23 “ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 1.3. Conducted power Test Mode Freq(MHz) Conducted Peak Powert[dBm] DH5 2402 3.27 2441 2.63 2480 2.29 2DH5 2402 2.58 2441 1.93 2480 1.6 3DH5 2402 2.57 2441 1.96 2480 1.61 Page 2 of 3 TestMode Freq(MHz) Conducted Peak Powert[dBm] BLE_1M 2402 -0.04 2440 -0.74 2480 -1.04 Test Mode Frequency[MHz] Peak power [dBm] 11B 2412 6.84 2437 5.21 2462 5.44 11G 2412 5.06 2437 5.51 2462 5.36 11N20SISO 2412 5.38 2437 5.81 2462 5.45 11N40SISO 2422 5.49 2437 6.28 2452 5.04 Test Mode Freq(MHz) Result [dBm] 11A 5180 4.92 5220 3.81 5240 4.74 5745 4.33 5785 4.88 5825 5.69 11N20SISO 5180 3.44 5220 2.39 5240 2.69 5745 3.76 5785 4.1 5825 4.84 11N40SISO 5190 3.54 5230 2.8 5755 3.4 5795 3.69 11AC20SISO 5180 4.21 5220 5 5240 4.79 5745 3.76 5785 5 5825 3.9 11AC40SISO 5190 4.43 Page 3 of 3 5230 3.85 5755 3.69 5795 4 11AX20SISO 5180 4.24 5220 3.98 5240 3.29 5745 3.33 5785 3.7 5825 3.92 11AX40SISO 5190 4.34 5230 3.51 5755 3.03 5795 3.07 1.4. Manufacturing tolerance Mode Max. Peak Conducted Output Power (dBm) Max. tune-up BT 3.27 3.0±1 BLE -0.04 1.0±1 2.4GWIFI 6.84 6.0±1 Mode Max. Average Conducted Output Power (dBm) Max. tune-up 5.2GWIFI 5.0 5.0±1 5.8GWIFI 5.69 5.0±1 2. E v a l u a t i o n R e s u l t Evaluation Results Band/Mode f (GHz) Antenna Distance (mm) RF output power (including tune-up tolerance) SAR Test Exclusion Threshold SAR Test Exclusion dBm mW BT 2.480 5 4.0 2.5119 0.7863<3.0 Yes BLE 2.480 5 2.0 1.5849 0.4962<3.0 Yes 2.4G 2.480 5 7.0 5.0119 1.5690<3.0 Yes 5.2G 5.24 5 6.0 3.9811 1.8826<3.0 Yes 5.8G 5.825 5 6.0 3.9811 1.9217<3.0 Yes 3. C o n c l u s i o n The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 D01v06 .....................End of Report.........................

1 FCC Appendix RF Test Data for BT FCC ID : 2A9PS-M-Q59 Company : Shenzhen Kxunda E-commerce Co., Ltd EUT : childrens tablet computer Model Number : M_Q59 Report No. : CTA25070200802 Reviewed By : Eric Wang 2 Appendix A: 20dB Emission Bandwidth Test Result TestMode Antenna Freq(MHz) 20dB EBW[MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict DH5 Ant1 2402 0.951 2401.547 2402.498 --- --- 2441 0.936 2440.550 2441.486 --- --- 2480 0.948 2479.544 2480.492 --- --- 2DH5 Ant1 2402 1.275 2401.379 2402.654 --- --- 2441 1.308 2440.355 2441.663 --- --- 2480 1.311 2479.352 2480.663 --- --- 3DH5 Ant1 2402 1.284 2401.379 2402.663 --- --- 2441 1.329 2440.346 2441.675 --- --- 2480 1.335 2479.340 2480.675 --- --- 3 Test Graphs DH5_Ant1_2402 DH5_Ant1_2441 DH5_Ant1_2480 4 2DH5_Ant1_2402 2DH5_Ant1_2441 5 2DH5_Ant1_2480 3DH5_Ant1_2402 3DH5_Ant1_2441 6 3DH5_Ant1_2480 7 Appendix B: Occupied Channel Bandwidth Test Result TestMode Antenna Freq(MHz) OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict DH5 Ant1 2402 0.87658 2401.5723 2402.4489 --- --- 2441 0.87301 2440.5699 2441.4429 --- --- 2480 0.87619 2479.5687 2480.4449 --- --- 2DH5 Ant1 2402 1.1943 2401.4114 2402.6057 --- --- 2441 1.1901 2440.4132 2441.6033 --- --- 2480 1.1924 2479.4133 2480.6057 --- --- 3DH5 Ant1 2402 1.1919 2401.4136 2402.6055 --- --- 2441 1.1896 2440.4144 2441.6040 --- --- 2480 1.1936 2479.4133 2480.6069 --- --- 8 Test Graphs DH5_Ant1_2402 DH5_Ant1_2441 DH5_Ant1_2480 9 2DH5_Ant1_2402 2DH5_Ant1_2441 10 2DH5_Ant1_2480 3DH5_Ant1_2402 3DH5_Ant1_2441 11 3DH5_Ant1_2480 12 Appendix C: Maximum conducted output power Test Result Peak Test Mode Antenna Freq(MHz) Conducted Peak Powert[dBm] Conducted Limit[dBm] Verdict DH5 Ant1 2402 3.27 ≤20.97 PASS 2441 2.63 ≤20.97 PASS 2480 2.29 ≤20.97 PASS 2DH5 Ant1 2402 2.58 ≤20.97 PASS 2441 1.93 ≤20.97 PASS 2480 1.60 ≤20.97 PASS 3DH5 Ant1 2402 2.57 ≤20.97 PASS 2441 1.96 ≤20.97 PASS 2480 1.61 ≤20.97 PASS 13 Appendix D: Carrier frequency separation Test Result TestMode Antenna Freq(MHz) Result[MHz] Limit[MHz] Verdict DH5 Ant1 Hop 1.016 ≥0.951 PASS 2DH5 Ant1 Hop 0.964 ≥0.874 PASS 3DH5 Ant1 Hop 1.04 ≥0.890 PASS 14 Test Graphs DH5_Ant1_Hop 2DH5_Ant1_Hop 3DH5_Ant1_Hop 15 16 Appendix E: Time of occupancy Test Result TestMode Antenna Freq(MHz) BurstWidth [ms] TotalHops [Num] Result[s] Limit[s] Verdict DH1 Ant1 Hop 0.390 319 0.124 ≤0.4 PASS DH3 Ant1 Hop 1.650 163 0.269 ≤0.4 PASS DH5 Ant1 Hop 2.890 106 0.306 ≤0.4 PASS 2DH1 Ant1 Hop 0.390 316 0.123 ≤0.4 PASS 2DH3 Ant1 Hop 1.640 167 0.274 ≤0.4 PASS 2DH5 Ant1 Hop 2.900 117 0.339 ≤0.4 PASS 3DH1 Ant1 Hop 0.390 314 0.122 ≤0.4 PASS 3DH3 Ant1 Hop 1.650 155 0.256 ≤0.4 PASS 3DH5 Ant1 Hop 2.900 100 0.29 ≤0.4 PASS 17 Test Graphs DH1_Ant1_Hop DH3_Ant1_Hop 18 DH5_Ant1_Hop 19 2DH1_Ant1_Hop 2DH3_Ant1_Hop 20 2DH5_Ant1_Hop 21 3DH1_Ant1_Hop 3DH3_Ant1_Hop 22 3DH5_Ant1_Hop 23 24 Appendix F: Number of hopping channels Test Result TestMode Antenna Freq(MHz) Result[Num] Limit[Num] Verdict DH5 Ant1 Hop 79 ≥15 PASS 2DH5 Ant1 Hop 79 ≥15 PASS 3DH5 Ant1 Hop 79 ≥15 PASS 25 Test Graphs DH5_Ant1_Hop 2DH5_Ant1_Hop 3DH5_Ant1_Hop 26 27 Appendix G: Band edge measurements Test Result TestMode Antenna ChName Freq(MHz) RefLevel [dBm] Result [dBm] Limit [dBm] Verdict DH5 Ant1 Low 2402 3.24 -58.4 ≤-16.76 PASS High 2480 1.72 -62.39 ≤-18.28 PASS Low Hop_2402 -1.02 -61.8 ≤-21.02 PASS High Hop_2480 -1.75 -63.94 ≤-21.75 PASS 2DH5 Ant1 Low 2402 -0.23 -49.27 ≤-20.23 PASS High 2480 -1.70 -58.37 ≤-21.7 PASS Low Hop_2402 -2.71 -52.48 ≤-22.71 PASS High Hop_2480 -2.18 -63.98 ≤-22.18 PASS 3DH5 Ant1 Low 2402 -2.88 -50.64 ≤-22.88 PASS High 2480 -1.06 -52.72 ≤-21.06 PASS Low Hop_2402 -2.78 -53.06 ≤-22.78 PASS High Hop_2480 -4.38 -65 ≤-24.38 PASS 28 Test Graphs DH5_Ant1_Low_2402 DH5_Ant1_High_2480 DH5_Ant1_Low_Hop_2402 29 DH5_Ant1_High_Hop_2480 2DH5_Ant1_Low_2402 30 2DH5_Ant1_High_2480 2DH5_Ant1_Low_Hop_2402 2DH5_Ant1_High_Hop_2480 31 3DH5_Ant1_Low_2402 3DH5_Ant1_High_2480 32 3DH5_Ant1_Low_Hop_2402 3DH5_Ant1_High_Hop_2480 33 Appendix H: Conducted Spurious Emission Test Result TestMode Antenna Freq(MHz) FreqRange [MHz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict DH5 Ant1 2402 Reference 2.35 2.35 --- PASS 30~1000 2.35 -67.54 ≤-17.65 PASS 1000~26500 2.35 -39.44 ≤-17.65 PASS 2441 Reference 1.60 1.60 --- PASS 30~1000 1.60 -68.04 ≤-18.4 PASS 1000~26500 1.60 -39.44 ≤-18.4 PASS 2480 Reference 2.24 2.24 --- PASS 30~1000 2.24 -67.21 ≤-17.76 PASS 1000~26500 2.24 -39.67 ≤-17.76 PASS 2DH5 Ant1 2402 Reference -1.22 -1.22 --- PASS 30~1000 -1.22 -67.45 ≤-21.22 PASS 1000~26500 -1.22 -44.52 ≤-21.22 PASS 2441 Reference -4.15 -4.15 --- PASS 30~1000 -4.15 -67.98 ≤-24.15 PASS 1000~26500 -4.15 -45.65 ≤-24.15 PASS 2480 Reference -4.17 -4.17 --- PASS 30~1000 -4.17 -67.98 ≤-24.17 PASS 1000~26500 -4.17 -44.87 ≤-24.17 PASS 3DH5 Ant1 2402 Reference -2.22 -2.22 --- PASS 30~1000 -2.22 -68.21 ≤-22.22 PASS 1000~26500 -2.22 -45.2 ≤-22.22 PASS 2441 Reference -2.43 -2.43 --- PASS 30~1000 -2.43 -68.38 ≤-22.43 PASS 1000~26500 -2.43 -45.67 ≤-22.43 PASS 2480 Reference -3.23 -3.23 --- PASS 30~1000 -3.23 -58.7 ≤-23.23 PASS 1000~26500 -3.23 -46.19 ≤-23.23 PASS 34 Test Graphs DH5_Ant1_2402_0~Reference DH5_Ant1_2402_30~1000 DH5_Ant1_2402_1000~26500 35 DH5_Ant1_2441_0~Reference DH5_Ant1_2441_30~1000 36 DH5_Ant1_2441_1000~26500 DH5_Ant1_2480_0~Reference DH5_Ant1_2480_30~1000 37 DH5_Ant1_2480_1000~26500 2DH5_Ant1_2402_0~Reference 38 2DH5_Ant1_2402_30~1000 2DH5_Ant1_2402_1000~26500 2DH5_Ant1_2441_0~Reference 39 2DH5_Ant1_2441_30~1000 2DH5_Ant1_2441_1000~26500 40 2DH5_Ant1_2480_0~Reference 2DH5_Ant1_2480_30~1000 2DH5_Ant1_2480_1000~26500 41 3DH5_Ant1_2402_0~Reference 3DH5_Ant1_2402_30~1000 42 3DH5_Ant1_2402_1000~26500 3DH5_Ant1_2441_0~Reference 3DH5_Ant1_2441_30~1000 43 3DH5_Ant1_2441_1000~26500 3DH5_Ant1_2480_0~Reference 44 3DH5_Ant1_2480_30~1000 3DH5_Ant1_2480_1000~26500 45 Appendix I: Duty Cycle Test Result TestMode Antenna Freq(MHz) ON Time [ms] Period [ms] DC [%] xFactor Limit Verdict DH5 Ant1 2402 2.91 3.75 77.60 1.10 --- --- 2441 2.92 3.75 77.87 1.09 --- --- 2480 2.92 3.75 77.87 1.09 --…

Text truncated - open the document above for the full version.

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. .................... : FCC ID. ........................................... : CTA25070200802 2A9PS-M-Q59 Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Aug. 01, 2025 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ........................... : Shenzhen Kxunda E-commerce Co., Ltd Address ............................................ : 405, Building 39-40, Shuidou Xinwei, Yousong Community, Longhua Street, Longhua District, Shenzhen, China Test specification ........................... : Standard ........................................... : FCC Part 15.247 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : childrens tablet computer Trade Mark ....................................... : N/A Manufacturer .................................... : Shenzhen Kxunda E-commerce Co., Ltd Model/Type reference ...................... : M_Q59 Listed Models ................................... : N/A Modulation ....................................... : GFSK, Π/4DQPSK, 8DPSK Frequency ......................................... From 2402MHz to 2480MHz Ratings ............................................. : DC 3.8V From battery and DC 5.0V From external circuit Result ............................................... : PASS Report No.: CTA25070200802 Page 2 of 31 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : childrens tablet computer Model /Type : M_Q59 Listed Models : N/A Applicant : Shenzhen Kxunda E-commerce Co., Ltd Address : 405, Building 39-40, Shuidou Xinwei, Yousong Community, Longhua Street, Longhua District, Shenzhen, China Manufacturer : Shenzhen Kxunda E-commerce Co., Ltd Address : 405, Building 39-40, Shuidou Xinwei, Yousong Community, Longhua Street, Longhua District, Shenzhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA25070200802 Page 3 of 31 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 TEST STANDARDS ...................................................................................................................................... 4 2 SUMMARY .................................................................................................................................................... 5 2.1 General Remarks .............................................................................................................................. 5 2.2 Product Description ........................................................................................................................... 5 2.3 Equipment Under Test ....................................................................................................................... 5 2.4 Short description of the Equipment under Test (EUT) ...................................................................... 5 2.5 EUT configuration .............................................................................................................................. 6 2.6 EUT operation mode ......................................................................................................................... 6 2.7 Block Diagram of Test Setup ............................................................................................................. 6 2.8 Related Submittal(s) / Grant (s) ......................................................................................................... 6 2.9 Modifications ...................................................................................................................................... 6 3 TEST ENVIRONMENT ................................................................................................................................. 7 3.1 Address of the test laboratory............................................................................................................ 7 3.2 Test Facility ....................................................................................................................................... 7 3.3 Environmental conditions ................................................................................................................…

Text truncated - open the document above for the full version.

1. Antenna Description: Antenna type PIFA Antenna Model M_Q59 Frequency range 2400-2500MHz, 5180-5240MHz, 5745-5825MHz Manufacturer Shenzhen Kxunda E-commerce Co., Ltd Address 405, Building 39-40, Shuidou Xinwei, Yousong Community, Longhua Street, Longhua District, Shenzhen, China ANT Peak Gain 1.20 dBi for 2400-2500MHz 1.28 dBi for 5180-5240MHz 1.25 dBi for 5745-5825MHz 2. Antenna Photo: 39.2mm 8.5mm 3. Test Equipment & Conditions 3.1 Test instrument VSWR is tested using Agilent E5071B connected to a hand mechanism, and the status is free space. 3.2 Test environment and methods 4．Antenna Radiation Pattern 2400MHz 2450MHz 2500MHz 5180MHz 5220MHz 5240MHz 5745MHz 5785MHz 5825MHz

FCC ID: 2A9PS-M-Q59 Test Setup Photos of the EUT FCC ID: 2A9PS-M-Q59