2A9QD-NX729J5G Mobile Phone

English | Quick Start Guide Español | Guía Rápida Deutsch | Kurzanleitung Français | Guide de Démarrage Rapide Italiano | Guida Rapida Türkçe | Hızlı Başlangıç Kılavuzu 日本語｜クイックスタートガイド لیلد لیغشتلا عیرسلا | ةغللاب ةیبرعلا Русский | Руководство по быстромузапуску Polski | Skrócona instrukcja obsługi 한국어|빠른 입문 안내 Suomi | Pikaopas Українська | Інструкція зі швидкого запуску 1 8 11 14 17 20 23 26 29 32 35 38 41 Legal notice Copyright Statement Copyright © 2022 by Shenzhen Tengfei Technology Management Ltd. All the copyrights of this document herein belong to Shenzhen Tengfei Technology Management Ltd. Without the written permission of copyright owner, no part of this publication may be excerpted, reproduced, translated by any person or entity in any form or by any means. This document is subject to change without prior notice. Shenzhen Tengfei Technology Management Ltd. keeps the right to make the final explanation to this document. Trademarks Android is a trademark of Google, Inc. Statement of Third-party Applications During the installation process of some third-party applications, the issues of repeated restart or abnormal use of software might be caused by incompatibility of the third-party applications, rather than the phone itself. Please download your software upgrade packages from the reliable official website. The installation of a third-party ROM or non-official operating system might bring safety risks and security threats. Shenzhen Tengfei Technology Management Ltd. shall not be liable for these risks and threats caused by upgrade of the operating system. 1 Your phone at a glance English | Quick Start Guide 1 11 13 15 17 19 21 23 z Light/Proximity Sensor Card Tray Touch Screen USB Type-C Port Fingerprint Sensor Rear Camera Flash Headphone Jack Shoulder Trigger(L) Shoulder Trigger(R) Game Boost Mode Air Outlet Noise-reduction MIC Front Camera Volume Buttons Air Inlet NFC Receiver Game MIC Power Button Speaker Microphone 2 Inserting the SIM card 1. Insert the end of the eject tool into the hole of the card tray and press firmly until the tray pops out. 2. Put one or two nano-SIM cards into the tray. 3. Push the card tray back into the phone. Note Dimensions of a nano-SIM card: 9 mm*12 mm. Charging the battery Connect the phone to the power adapter using the included USB cable and power adapter. Note ž Your phone and power adapter might heat up while charging. ž Use other USB cable or power adapter might decrease the life span of your phone or cause fire, explosion and other hazards. The illustrations of products and accessories in the user guide are all schematic diagrams and are for reference only. Due to product updates and upgrades, the actual product and the schematic diagram may be slightly different, please refer to the actual product. 3 Powering On/Off Phone Make sure the battery is charged before powering on. ž Press and hold the Power key to turn on your phone. ž To power off, press and hold the Power key and touch ‘Swipe to power off ’. Waking Up Your Phone Your phone automatically goes into sleep mode when it is not in use for some time. The display is turned off to save power and the keys are locked to prevent accidental operations. You can wake up your phone by turning on the display and unlocking the keys. 1. Press the Power key to turn the screen on. 2. Swipe up on the screen. Note If you have set an unlock pattern, a PIN, or a password for your phone, you’ll need to draw the pattern, or enter the PIN/password to unlock the phone. 4 Hardware and software The certified hardware version of your phone is NX729J _V1AMB. The certified software version of your phone is NX729J_UNCommon_V3.03. The Wi-Fi function for this device is restricted to indoor use only when operating in the 5150 MHz to 5350 MHz frequency range. Safety warning ž To prevent possible hearing damage when using a headset, do not use high volume for long period. ž Use the earphone carefully. Excessive sound pressure from headsets and headphones can cause hearing loss. ž Adapter shall be installed near the equipment and shall be easily accessible. ž The phone's normal operating temperature is 0°C ~ 40°C. In order to ensure the normal phone functions, do not use this phone outside the temperature range. CAUTION Risk of explosion if the battery is replaced by an incorrect type disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. FCC Regulatory Compliance ž FCC Regulations: This mobile phone has been tested and found to comply with the 5 limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by Shenzhen Tengfei Technology Management Ltd. for compliance could void the us…

Text truncated - open the document above for the full version.

Shenzhen Tengfei Technology Management Ltd. Date: 2022-12-15 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The Shenzhen Tengfei Technology Management Ltd., the undersigned, hereby authorizes Miss. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the Shenzhen Tengfei Technology Management Ltd. solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2A9QD-NX729J including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Shenzhen Tengfei Technology Management Ltd. in connection with the Application shall have the same effect as acts of the Shenzhen Tengfei Technology Management Ltd.. Shenzhen Tengfei Technology Management Ltd. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory: Contact name:Mei Jing Title:Product Manager Tel: 15889961069 Email:[email protected] Company name: Shenzhen Tengfei Technology Management Ltd.

Shenzhen Tengfei Technology Management Ltd. Date:2022-12-15 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality forFCC ID: 2A9QD-NX729J To Whom it may concern: Pursuant to sections 0.457 and 0.459 of Commission’s Rules(CFR 47), and Section 552(b)(4) of the Freedom of Information Act,Shenzhen Tengfei Technology Management Ltd.hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-TermConfidentiality for 180 days after the grant as outlined in Public Notice DA04-1705. This provision will giveShenzhen Tengfei Technology Management Ltd.temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listedas follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST ExhibitDescription PERMANENT 1Block Diagram 2Operational Description 3Schematics 4BOM 5Tuneupprocedure SHORT-TERM 6External Photos 7Internal Photos 8Test-Setup Photos 9User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory: Name:Mei Jing Company name:Shenzhen Tengf ei Tec hnology Management Ltd. Address:Room 3101, Building D1, Chuangzhi Yuncheng, Liuxian Avenue, Xili Street, Nanshan District, Shenzhen, China Tel: 15889961069 Email: [email protected]

Declaration To whom it may concern: We have declared below featured for FCC equipment authorization, Device FCC ID: 2A9QD-NX729J Don't operate on Channels 12 and 13. US 2.4G channel 12-13 and Country code selection are disabled through proprietary software and are not user changeable Should you have any questions, please feel free to contact me. Signature : Date:2022/12/15 Contact name:Mei Jing Title: Product Manager Company name: Shenzhen Tengfei Technology Management Ltd.

Shenzhen Tengfei Technology Management Ltd. UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID:2A9QD-NX729J (1) DFS Device -- Master,Client with Radar detection capability , Client without radar detection capability,N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 2412 –2462 MHzYes,NoYes,NoYes,NoYes,No 2422 –2452 MHzYes,NoYes,NoYes,NoYes,No 5745 –5825 MHzYes,NoYes,NoYes,NoYes,No 5755 –5795 MHzYes,NoYes,NoYes,NoYes,No 5180 –5240 MHzYes,NoYes,NoYes,NoYes,No 5190 –5230 MHzYes,NoYes,NoYes,NoYes,No 5260 –5320 MHzYes,NoYes,NoYes,NoYes,No 5270 –5310 MHzYes,NoYes,NoYes,NoYes,No 5500 –5700 MHzYes,NoYes,NoYes,NoYes,No 5510 – 5670 MHz Yes,NoYes,NoYes,NoYes,No (3) Country code selection ability -Yes ,No If no, pls explain how was implemented : Country is selected as US by defaultand user can not change the country code. (4) Meet 15.202 requirement - Yes ,No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply ,No Apply, (If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) The device configuration can not be modified by user as program is not exposed to user by any means. Hardware does not allow USB connection for user which is must to change the configuration. If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Printed Name : Mei Jing Position : Product Manager

FCC ID: 2A9QD-NX729J External Photos 1. EUT front view 2. EUT rear view 3. EUT left side view 4. EUT right side view 5. EUT top view 6. EUT bottom view 7. Transparent shell material 8. Accessories

Label： Location：

FCC ID: 2A9QD-NX729J Internal Photos 1. EUT uncover view 2. Antenna view 2/3/4G LMHB PRX-Tx/Rx N5/66 PRX-Tx/Rx 2/3/4G LMHB DRX-Tx/Rx N5/66 DRX-Tx/Rx N41/66/77 RX1 N41/66/77 RX2 WIFI 2.4 GHz CH1 TX N41/77 TRX0-Tx/Rx WIFI 5GHz CH1 TX WIFI 2.4/5GHz CH0 TX BT TX N41 RX3 NFC

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ22100161S02 Annex C Plots of System Performance Check Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.13 System Check_750MHz_Head Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750 Medium parameters used: f = 750 MHz; σ = 0.905 S/m; ε r = 42.042; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(10.2, 10.2, 10.2) @ 750 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW750/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.03 W/kg CW750/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 54.40 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 3.46 W/kg SAR(1 g) = 2.11 W/kg; SAR(10 g) = 1.42 W/kg Maximum value of SAR (measured) = 2.93 W/kg 0 dB = 2.93 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.15 System Check_900MHz_Head Communication System: UID 0, CW (0); Frequency: 900 MHz;Duty Cycle: 1:1 Medium: HSL_900 Medium parameters used: f = 900 MHz; σ = 0.981 S/m; ε r = 41.35; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(9.81, 9.81, 9.81) @ 900 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW900/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.88 W/kg CW900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 57.60 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 4.50 W/kg SAR(1 g) = 2.92 W/kg; SAR(10 g) = 1.88 W/kg Maximum value of SAR (measured) = 3.75 W/kg 0 dB = 3.75 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.18 System Check_1800MHz_Head Communication System: UID 0, CW (0); Frequency: 1800 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1800 MHz; σ = 1.423 S/m; ε r = 41.125; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(8.26, 8.26, 8.26) @ 1800 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW1800/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 15.7 W/kg CW1800/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 85.43 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 22.1 W/kg SAR(1 g) = 9.78 W/kg; SAR(10 g) = 5.1 W/kg Maximum value of SAR (measured) = 15.4 W/kg 0 dB = 15.4 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.20 System Check_2000MHz_Head Communication System: UID 0, CW (0); Frequency: 2000 MHz;Duty Cycle: 1:1 Medium: HSL_2000 Medium parameters used: f = 2000 MHz; σ = 1.428 S/m; ε r = 40.202; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.99, 7.99, 7.99) @ 2000 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW2000/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 18.5 W/kg CW2000/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 88.86 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 28.4 W/kg SAR(1 g) = 10.2 W/kg; SAR(10 g) = 5.21 W/kg Maximum value of SAR (measured) = 18.3 W/kg 0 dB = 18.3 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.22 System Check_2300MHz_Head Communication System: UID 0, CW (0); Frequency: 2300 MHz;Duty Cycle: 1:1 Medium: HSL_2300 Medium parameters used: f = 2300 MHz; σ = 1.667 S/m; ε r = 39.467; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.66, 7.66, 7.66) @ 2300 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW2300/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 21.2 W/kg CW2300/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 93.60 V/m; Power Drift = 0.18 dB Peak SAR (extrapolated) = 27.3 W/kg SAR(1 g) = 12.58 W/kg; SAR(10 g) = 6.02 W/kg Maximum value of SAR (measured) = 20.6 W/kg 0 dB = 20.6 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.25 System Check_2450MHz_Head Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL_2450 Medium parameters used: f = 2450 MHz; σ = 1.817 S/m; ε r = 38.801; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid T…

Text truncated - open the document above for the full version.

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ22100161S02 Annex D Plots of Maximum SAR Test Results Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.15 GSM850_GPRS(2 TX slots)_Right Cheek_Ch189_Ant0 Communication System: UID 0, GSM850(class 10) (0); Frequency: 836.4 MHz;Duty Cycle: 1:4.15 Medium: HSL_900 Medium parameters used: f = 836.4 MHz; σ = 0.958 S/m; ε r = 40.843; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(9.81, 9.81, 9.81) @ 836.4 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch189/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.05 W/kg Ch189/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.54 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 1.41 W/kg SAR(1 g) = 0.632 W/kg; SAR(10 g) = 0.322 W/kg Maximum value of SAR (measured) = 1.01 W/kg 0 dB = 1.01 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.20 GSM1900_GPRS(2 TX slots)_Right Cheek_Ch661_Ant0 Communication System: UID 0, GSM1900(Class 10) (0); Frequency: 1880 MHz;Duty Cycle: 1:4.15 Medium: HSL_2000 Medium parameters used: f = 1880 MHz; σ = 1.321 S/m; ε r = 39.882; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.99, 7.99, 7.99) @ 1880 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch661/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.886 W/kg Ch661/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.638 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 1.09 W/kg SAR(1 g) = 0.537 W/kg; SAR(10 g) = 0.249 W/kg Maximum value of SAR (measured) = 0.833 W/kg 0 dB = 0.833 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.20 WCDMA Band II_RMC 12.2Kbps_Right Cheek_Ch9400_Ant0 Communication System: UID 0, UMTS-FDD (0); Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: HSL_2000 Medium parameters used: f = 1880 MHz; σ = 1.321 S/m; ε r = 39.882; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.99, 7.99, 7.99) @ 1880 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch9400/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.594 W/kg Ch9400/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 5.039 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 0.914 W/kg SAR(1 g) = 0.461 W/kg; SAR(10 g) = 0.220 W/kg Maximum value of SAR (measured) = 0.711 W/kg 0 dB = 0.711 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.18 WCDMA Band IV_RMC 12.2Kbps_Right Cheek_Ch1413_Ant0 Communication System: UID 0, UMTS-FDD (0); Frequency: 1732.6 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1733 MHz; σ = 1.366 S/m; ε r = 41.367; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(8.26, 8.26, 8.26) @ 1733 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch1413/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.660 W/kg Ch1413/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 6.632 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.944 W/kg SAR(1 g) = 0.487 W/kg; SAR(10 g) = 0.242 W/kg Maximum value of SAR (measured) = 0.726 W/kg 0 dB = 0.726 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.15 WCDMA Band V_RMC 12.2Kbps_Right Cheek_Ch4182_Ant0 Communication System: UID 0, UMTS-FDD (0); Frequency: 836.4 MHz;Duty Cycle: 1:1 Medium: HSL_900 Medium parameters used: f = 836.4 MHz; σ = 0.958 S/m; ε r = 40.843; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(9.81, 9.81, 9.81) @ 900 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2021.12.30 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch4182/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.553 W/kg Ch4182/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 8.883 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 0.956 W/kg SAR(1 g) = 0.449 W/kg; SAR(10 g) = 0.237 W/kg Maximum value of SAR (measured) = 0.639 W/kg 0 dB = 0.639 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.11.15 CDMA2000 BC0_RC3 SO32 (F+SC…

Text truncated - open the document above for the full version.

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ22100161S02 Annex E Conducted Power Note: Conducted power unit: dBm The target power was recorded in the manufacture document. 128189251128189251 824.2836.4848.8824.2836.4848.8 32.4832.5132.4433.5023.4823.5123.4424.50 32.4932.5232.4533.5023.4923.5223.4524.50 31.2631.3431.3132.0025.2625.3425.3126.000.08 29.2529.2729.2130.0024.9925.0124.9525.740.06 27.0827.1127.0528.0024.0824.1124.0525.000.06 26.5426.5826.4127.0017.5417.5817.4118.000.17 25.3625.4125.3126.0019.3619.4119.3120.000.10 23.4423.4823.2624.0019.1819.2219.0019.740.22 21.2421.3421.2122.0018.2418.3418.2119.000.13 Max.32.52Max.25.34 512661810512661810 1850.218801909.81850.218801909.8 29.5829.6129.5430.5020.5820.6120.5421.50 29.5929.6229.5330.5020.5920.6220.5321.50 28.4328.4728.3329.0022.4322.4722.3323.000.14 26.3626.3726.3927.0022.1022.1122.1322.740.03 24.0624.1124.0325.0021.0621.1121.0322.000.08 25.6125.4725.3626.0016.6116.4716.3617.000.25 24.5624.5824.4325.0018.5618.5818.4319.000.15 22.3722.4122.3823.0018.1118.1518.1218.740.04 20.4020.4620.4121.0017.4017.4617.4118.000.06 Max.29.62Max.22.47 926294009538131214131513413241824233 966298009938153716381738435744074458 1852.418801907.61712.41732.61752.6826.4836.4846.6 3GPP Rel 99RMC 12.2Kbps23.1623.2723.2424.0023.1123.1523.1024.0023.1723.2023.1524.00 3GPP Rel 6HSDPA Subtest-121.9122.0022.0023.0022.1322.2122.0323.0022.3822.3522.2423.00 3GPP Rel 6HSDPA Subtest-221.8822.0121.9623.0022.1022.3022.0223.0022.3822.4022.2923.00 3GPP Rel 6HSDPA Subtest-321.4221.5021.4323.0021.5821.7621.5623.0021.8821.8321.7023.00 3GPP Rel 6HSDPA Subtest-421.3721.4921.4523.0021.5621.6421.5623.0021.8921.8521.7823.00 3GPP Rel 8 DC-HSDPA Subtest-121.9122.0321.9823.0022.1522.2222.0023.0022.3822.3422.2423.00 3GPP Rel 8 DC-HSDPA Subtest-221.9022.0521.9923.0022.1422.2422.0123.0022.3522.3722.2623.00 3GPP Rel 8 DC-HSDPA Subtest-321.4221.5521.5223.0021.6121.7321.4723.0021.8421.8621.7323.00 3GPP Rel 8 DC-HSDPA Subtest-421.3921.5421.5123.0021.5721.6821.5423.0021.8721.8321.7423.00 3GPP Rel 6HSUPA Subtest-121.9022.0321.9823.0022.1122.1922.0723.0022.3622.3422.2223.00 3GPP Rel 6HSUPA Subtest-221.4521.5721.4923.0021.6421.7421.5923.0021.8421.8721.7623.00 3GPP Rel 6HSUPA Subtest-321.9122.0121.9123.0022.0522.2322.0023.0022.3822.3722.2323.00 3GPP Rel 6HSUPA Subtest-421.9022.0321.9923.0022.1422.2222.0423.0022.3722.3822.2523.00 3GPP Rel 6HSUPA Subtest-521.9122.0321.9423.0022.0922.1922.0723.0022.3122.3622.1923.00 3GPP Rel 7 HSPA+ (16QAM) Subtest-121.3821.4521.4523.0021.5921.7521.5523.0021.8621.8121.7123.00 Cable Loss0.8Cable Loss0.8Cable Loss0.6 Max.23.27Max.23.15Max.23.20 1013384777256001175 824.7836.52848.311851.2518801908.75 23.1523.2223.2124.0023.1923.2323.2024.00 23.1123.1523.1124.0023.1223.1823.1624.00 23.2823.3423.2424.0023.2423.2523.2224.00 23.1123.2023.1924.0023.1923.2023.1924.00 Cable Loss0.6Cable Loss0.8 Max.23.34Max.23.25 Full Power GSM850Burst Average Power (dBm)Frame-Average Power (dBm) TX Channel Frequency (MHz) GSM 1 Tx slot GPRS 1 Tx slot GPRS 2 Tx slots Tune-up Limit (dBm) Tune-up Limit (dBm) Ch Delta > 0.5 0.08 GPRS 3 Tx slots GPRS 4 Tx slots EDGE 1 Tx slot Mode AttenuatorCable Loss : 0.6 EDGE 2 Tx slots EDGE 3 Tx slots EDGE 4 Tx slots GSM1900Burst Average Power (dBm)Frame-Average Power (dBm) TX Channel Frequency (MHz) GSM 1 Tx slot GPRS 1 Tx slot Tune-up Limit (dBm) Ch Delta > 0.5 0.09 Tune-up Limit (dBm) GPRS 2 Tx slots GPRS 3 Tx slots GPRS 4 Tx slots Mode AttenuatorCable Loss : 0.8 EDGE 4 Tx slots EDGE 1 Tx slot EDGE 2 Tx slots EDGE 3 Tx slots BandWCDMA Band II (dBm)WCDMA Band IV (dBm)WCDMA Band V (dBm) TX Channel Rx Channel Frequency (MHz) Tune-up Limit (dBm) Tune-up Limit (dBm) Tune-up Limit (dBm) Attenuator BandCDMA2000 BC0 (dBm)CDMA2000 BC1 (dBm) TX Channel Frequency (MHz) Tune-up Limit (dBm) Tune-up Limit (dBm) Attenuator Mode RC1 SO55 RC3 SO55 RC3 SO32 (F+SCH) RC3 SO32 (+SCH) Mode BW [MHz] Modulation RB Size RB Offset Low Channel Middle Channel High Channel BW [MHz] Modulation RB Size RB Offset Low Channel Middle Channel High Channel 187001890019100200502017520300 18601880190017201732.51745 20QPSK1023.1223.1423.0720QPSK1023.1223.1623.15 20QPSK14923.1123.1323.0620QPSK14923.0623.0723.08 20QPSK19923.0323.1023.0720QPSK19922.9823.0023.03 20QPSK50022.1722.2922.1820QPSK50022.1722.2322.10 20QPSK502422.2122.1522.1320QPSK502422.1522.1822.19 20QPSK505022.1822.2122.1420QPSK505022.1222.1522.21 20QPSK100022.2122.2222.1120QPSK100022.0922.1822.13 2016QAM1022.4822.3922.222016QAM1021.8222.0722.13 2016QAM14922.3622.4522.402016QAM14922.0722.1322.28 2016QAM19922.4622.2322.502016QAM19922.1422.1322.24 2016QAM50021.2921.2421.282016QAM50021.2021.1621.21 2016QAM502421.3821.2321.222016QAM502421.2321.1221.16 2016QAM505021.2521.2821.302016QAM505021.2821.1421.15 2016QAM100021.2321.2521.212016QAM100021.2021.1921.17 2064QAM1021.3321.4721.422064QAM1021.3221.2621.30 2064QAM14921.3621.4021.302064QAM14921.1221.1421.30 2064QAM19921.4621.3421.162064QAM19921.2221.2321.34 2064QAM50021.3121.2021.202064QAM50021.1421.1121.12 2064QAM502421.1421.1521.222064QAM5…

Text truncated - open the document above for the full version.